Is the Exchange server available in other languages?

Hello,
I need to know if Exchange can be localized on a server. I need to know if an email account will always have "Inbox" as a folder no matters the language used.
Thanks
ArchieCoder

Hi ArchieCoder,
In addition to the above suggestion, I would like to clarify that the language of the default folder names wouldn't be changed unless the LocalizeDefaultFolderName parameter is set to $true.
The value is set to $false by default. This parameter can only be used by the mailbox owner running the task. If a non-mailbox owner tries to configure this setting on the mailbox, an error will be reported.
For more information, here is a thread for your reference.
Set-MailboxRegionalConfiguration
http://technet.microsoft.com/en-us/library/dd351103(v=exchg.150).aspx
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

Not getting MessageId in the Sync response from the Exchange Server

My client uses 12.1 protocol (Exchange 2007). When client sends a sync command similar to below:
<?xml version="1.0" encoding="utf-8"?>
<airsync:Sync xmlns:airsync="AirSync:">
<airsync:Collections>
<airsync:Collection>
<airsync:SyncKey>1646998688</airsync:SyncKey>
<airsync:CollectionId>6</airsync:CollectionId>
<airsync:DeletesAsMoves>0</airsync:DeletesAsMoves>
<airsync:GetChanges>1</airsync:GetChanges>
<airsync:Options>
<airsync:MIMESupport>0</airsync:MIMESupport>
<airsyncbase:BodyPreference xmlns:airsyncbase="AirSyncBase:">
<airsyncbase:Type>2</airsyncbase:Type>
</airsyncbase:BodyPreference>
</airsync:Options>
</airsync:Collection>
</airsync:Collections>
</airsync:Sync>
All I get in Response is :
<?xml version="1.0" encoding="utf-8"?>
<airsync:Sync xmlns:airsync="AirSync:">
<airsync:Collections>
<airsync:Collection>
<airsync:SyncKey>145630513</airsync:SyncKey>
<airsync:CollectionId>6</airsync:CollectionId>
<airsync:Status>1</airsync:Status>
<airsync:Commands>
<airsync:Add>
<airsync:ServerId>6:316</airsync:ServerId>
<airsync:ApplicationData>
<email:To xmlns:email="Email:">"Email 3" <[email protected]></email:To>
<email:From xmlns:email="Email:">"[email protected]" <[email protected]></email:From>
<email:Subject xmlns:email="Email:">Test mail again</email:Subject>
<email:DateReceived xmlns:email="Email:">2014-09-10T14:21:40.541Z</email:DateReceived>
<email:DisplayTo xmlns:email="Email:">QA Email 3</email:DisplayTo>
<email:ThreadTopic xmlns:email="Email:">Test mail again</email:ThreadTopic>
<email:Importance xmlns:email="Email:">1</email:Importance>
<email:Read xmlns:email="Email:">0</email:Read>
<airsyncbase:Body xmlns:airsyncbase="AirSyncBase:">
<airsyncbase:Type>2</airsyncbase:Type>
<airsyncbase:EstimatedDataSize>844</airsyncbase:EstimatedDataSize>
<airsyncbase:Data><html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<style>

</style>
</head>
<body lang="EN-US" link="blue" vlink="purple">
<div>
<p>&nbsp;</p>
</div>
</body>
</html>
</airsyncbase:Data>
</airsyncbase:Body>
<email:MessageClass xmlns:email="Email:">IPM.Note</email:MessageClass>
<email:InternetCPID xmlns:email="Email:">20127</email:InternetCPID>
<email:Flag xmlns:email="Email:" />
<email:ContentClass xmlns:email="Email:">urn:content-classes:message</email:ContentClass>
<airsyncbase:NativeBodyType xmlns:airsyncbase="AirSyncBase:">2</airsyncbase:NativeBodyType>
</airsync:ApplicationData>
</airsync:Add>
</airsync:Commands>
</airsync:Collection>
</airsync:Collections>
</airsync:Sync>
So, I am not able to set "In-Reply-To" header while sending my SendMail command. Which results in no LastVerbExecuted returned from the server (which I suppose is caused by the mentioned issue).
So, my question is, how to make the exchange server return a Message Id field for a new email received by my client?
Something like mentioned here:
http://msdn.microsoft.com/en-us/library/ee220018%28v=EXCHG.80%29.aspx

You are getting customized error as a SOAP Fault from PeopleSoft application.
Regarding 3 responses, your send port might have retry count = 3 set in your send port. Hence you are getting 3 faults on each request you are making.
Now coming to the actual issue, when something goes wrong and you got fault message response, you need to deal with it. Means your orchestration send port will have "Response" and "Fault" response and you will deal with these messages respectively.
You need to assign MessageTypes for Response and Fault accordingly.
If you have done all above and still getting an error, check this
hotfix 978156 which is applicable in case of 2k6R2 and 2009 biztalk versions and happens while dealing with cross object conversion (datetime)
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Errors between Mail 5 inbox and Server inbox on the Exchange Server

Hi,
I upgraded to Lion recently and it seems that the Mail application struggles with the Exchange interface (although it was already the case for Snow Leopard).
Bottom line there are some email messages in my Mail inbox, which in principle mirrors the inbox on the Exchange server, which are not on the server anymore but still appears in the Inbox. The main problems is if I want to delete such message, I get an error message saying the the "message can nto be moved to Trash". Logically, since it is not on the server it is by extension not in the inbox, but it seems that a duplicate of messages gets stuck in the Mail application. Problem is that now they can;t be moved.
I restarted the application to restart the synchornisation, and still messages appears on my Mac but do not exists even on the server.
Has anyone has tips on how to get rid of these emails?
Thanks in advance

Hello Nirav,
-> This question has to be posted at MAXDB/liveCache forum &
     I saw that you already created the thread for the correct forum::
      Re: Problem in connection between SCM 5.0 and LiveCache(Both on different H
-> As SAP customer you have option to create the SAP ticket,
     we could logon to your system , check the issue & help you with
     the solution.
Thank you and best regards, Natalia Khlopina

How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

We have Exchange 2013 in Hybrid with Office 365.
How to get rid of the message in the Exchange Server Queue?
Mounting the database fixed it.
Thanks!!!

Mounting the database fixed it.

What are the procedure to be followed while restart the exchange server..?

Dear All,
Pls provide the procedure to be followed while restarting the exchange server. i.e. what is the sequence for restarting and starting the exchange server.
Regards
R Nantha Ram

As suggested above no such procedure to be followed unless it is a DAG.
If you are running exchange and DC in one OS. Stop exchange services first then restart server. (commands below to stop exchange related services)
net stop msexchangeadtopology /y
net stop msexchangefba /y
net stop msftesql-exchange /y
net stop msexchangeis /y
net stop msexchangesa /y
net stop iisadmin /y
net stop w3svc /y
This is bcz DC stops quicker than Exchange, therefore Exchange is unable to write to the domain controller and has to be be "killed" by the operating system.
This continual "killing" of the Exchange services, instead of allowing them to shutdown gracefully is not good for the database and is one of the prime reasons for recommending that Exchange is not installed on a domain controller.
A better option is to stop the services before you begin to shutdown the server. This will also cause the server to shutdown more quickly because it isn't waiting for the services to timeout. This can significantly decrease the shutdown/reboot time of Server.
MAS

Why does my IPad 2 keep re-wiping after I restore and reconnect to the exchange server?

For some unknown reason my IPad was wiped via my companies exchange server (2007)
I did not initiate a wipe from the exchange server, my IT department did not either and I did not have 10 failed attempts to login.
Here is the story:
-My email access gets locked here at work.
-My IT department unlocks my email
-Then I go to our exchange server>options and remove the IPad from the device list.
-Then I plug my IPad 2 into my Mac, open Itunes and restore successfully. Then I go to my mail settings, I re-connect to our exchange server successfully and see my most recent emails.
-Then several minutes later it suddenly wipes again
-Then I receive the notification Remote Device Wipe Confirmation
(then I repeat the entire process and get the same result)
**I have the Iphone 4 and I am connected to the same server, without problems
Here is what I have:
IPad 2 Software ver. 5.0.1
Mac OS 10.6.5
Microsoft Exchange 2007

I would recommend as soon as you restore the iPad go in and delete the exchange account from your device. It may have a cached entry causing the wipe command to continue to execute. You may ultimately need to restore it without the backup and set the account up again.

Display name of shared calendar in Outlook clients after name change on the Exchange Server

I have changed the name of a conference room resource calendar on the Exchange server but the name change is not being reflected in the end user's Outlook clients. I tested a remove/re-add and that worked but I cannot have everyone in the company do this.
Is there anyway to force the change down to the Outlook clients?

I don't know for sure, but if this is the case, then it's highly likely that the GUID is used by the client after its first view of the calendar. From that point on, it appears it doesn't "revisit" the directory for updated names.
We'd need Outlook team feedback for confirmation.

Unable to connect to the Exchange server using HTTP/HTTPS protocol.

hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............

<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>

<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"

connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>

<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>

<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?

Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the 
comment which you placed inside the "<cfexchangeConnection>"
tag.

How to have the Chat history without the Exchange server?

How to have the Chat history without the Exchange server?

Hi,
You can try Archiving server. Archiving is the storing of IM and conferencing data in an SQL backend database. This data is not instantly readable / searchable. The Lync users are not able to read it directly. The admin can export the data using Lync powershell
and then convert it into a readable format.
Kent Huang
TechNet Community Support

Is it possible to turn off my access to the exchange server?

I'm feuding with the ITS department at the moment. They claim they don't want to support my iPhone, they only want us to use the crappy Blackberries they gave everyone. I had to set up my own iPhone - Exchange connection, and it has all worked fine up to now, but about 3 hours ago my entire connection to the Exchange Server was killed. I get no email, no contacts, no calendar, nothing. My fellow iPhone users (3 in my office) aren't getting email either.
I suspect that the evil ITS administrator has turned off access to iPhones, but nobody believes me. Is that possible? Is there any way around it? I don't want to have to carry two phones.
The ITS administrator told my boss this morning (shortly before i got disconnected) that Microsoft might be "turning off" the access to iPhones from Exchange servers. That didn't make sense to me, because Apple is paying MS for the right to use Exchange, right? Also, I googled and couldn't find anything about that kind of an announcement. Has anyone else had issues today?

gamecoug,
Administrators of an Exchange server can block access for ActiveSync devices server wide, account specific, or even device specific.
In addition using ActiveSync they can specify security policies for connected phones. The iPhone supports remote wipe as well.
Hope this helps,
Nathan C.

Ical can´t save the event "event name" to the exchange server

I have been trying to set up iCal to work with exchange in several Macs runnig Snow Leopard but there seems to be some time zone issue.
When I try to save a new event, I get a error: iCal can't save the event "event name" to the exchange server. The account "account name" currently can't be modified, to discard... If I change the city in time zone preferences to anything outside Mexico (for example Dallas Tx.) then everything works perfect, the problem is all of my users are in Mexico City aund using CST instead may cause other problems.
I have tried with time zone support enabled and also disabled.
Something very odd is that existing events can be modified or deleted, even with the city set to Mexico in time zone preferences.
¿Any suggestions?

UPDATE 2: Found aother post that explains that this problem was fixed by enabling time zone support in iCal and then changing the city to the correct one by clicking in the upper right corner of iCal´s window where the time zone is displayed. https://discussions.apple.com/message/10108361#10108361
Well, I followed instructions mentioned above. By clicking on the upper right corner, a new window opens showing current iCal time zone settings (Not the same as Mac OS), in this window, time zone seems right (CDT), but as closest city, "UTC-UTC" is selected, so I change this to México and click OK, but the problem continues. If I go back to this iCal´s time zone window, "UTC-UTC" is still selected! and no mater how many times i change it back, after clicking OK, "UTC-UTC" comes back!.
Something else I just found out is that if the city is changed to anything outside Mexico within the same time zone in system preferences, as I mentioned before I can save events, but now in the upper right corner of iCal, I have two different CDT´s, one named "CDT Central Time" (the one that works) and other named "CDT Central Standard Time" (the one that doesn't).
My guess is that because daylight saving start and finish dates in Mexico are different from USA's, Apple created a different time zone with Mexico's rules (CDT CentralStandard Time) but something is wrong with it.

Can't connect to the exchange server

I'm having trouble geting Mail to work with the exchange server here at work. any ideas?

I tried Mick's suggestions but they don't help. One problem seems to be that my boxname on the exchange server unfortunately has a space in it ("firstname lastname", windows style). Upon initial setup the configurator won't allow this, but even if I set up a dummy username (without spaces) and then add the space into the account information afterward, I still see "could not connect to this exchange server" when I click on "Check Again" in the Mail Connection Doctor.
The outgoing SMTP server is configured as servername.companyname.local, port 25, no SSL, and no authentication, and outgoing mail works fine... so it's not a routing or DNS lookup issue on the local side.
The other annoying thing is that the instructions at
http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml1098.html
say that the "Assist me..." button should bring up something called Network Diagnostics. But that button is always greyed out, and spotlight doesn't turn up any apps by that name anywhere on the system.
Can anyone suggest a way of troubleshooting just where things are breaking down? I looked at the most obvious console logs and didn't see anything.
Thanks in advance!
/H

Change the Exchange server name in outlook

Hello All,
Configured two Exchange server 2010. Both server have Mailbox, CAS and HUB installed. All the user use outlook (Exchange Client). All outlook configured with exchange server host name not mapi name. Now i need to change the exchange server name in outlook.
Is there any procedure to change the Exchange server name for outlook automatically. Please suggest.
Thanks

Hi,
Let’s begin with the partition named when RPC endpoint Changes in the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
“To add further on the cas array, the Outlook clients with an existing Outlook profile would continue to use the old RPC endpoint rather than the new RPC endpoint (even though Autodiscover detected the change). This is because the old RPC endpoint does not
return an ecWrongServer response to the client. The RPC endpoint accepts the connection; therefore, Outlook ignores the Autodiscover response because it has a working connection.”
In this case, except with recreating a profile, we can move mailboxes to force the Outlook client to do a profile discovery and update the profile based on new information.
For more information about moving mailboxes, please refer to the following article:
http://technet.microsoft.com/en-us/library/bb124495(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Sorry I can not find Exchange 2010 forum does it still exist? How do you stop mails automaticaly being received by outlook on the exchange server

Hi
is it possible to stop the exchange server 2010 from automatically populating the outlook clients inbox with new emails forcing the users to press send and receive every time they want to collect emails?
I thought it was but I can no longer find any information on this.
kind regards
Paul
paul waterhouse

Hello，
Based on my known, I'm afraid that there is no way to realize it on exchange server.
Could you tell me why you do this?
If you want to control the size of mailboxes, you can configure mailbox storage quotas for a mailbox.
If you want to delete specific message or messages from the specific sender or domain, you can create transport rule to do it. Or you can set outlook rule to do it.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

My vodafone emais get delivered to my BB each time I open them on the exchange server

Hi
each time I open an old email on my Outlook or on the exchange server, I get it send to my BB as if it was a new email.
It's driving me insane...Does anyone know how to fix thi?
Thanks
Lucia

Probably far too old to register. Sounds like a bug, stopping the "never" selection from working. You may be stuck with it.

Is the Exchange server available in other languages?

Similar Messages

Maybe you are looking for