Duplicating entry in 2 tables

Hi,
I am looking for some help on how to do the following:
I use Number to track my finances. I have two tables - one for my checking account and the other one for my cash account. When I withdraw cash from my checking account I record a transfer or debit transaction in my checking account table (in the type column of this table I enter "transfer" and in the category column of this table I enter "cash account"); Obviously I have to record a matching transaction in my cash account where the category column shall read "checking account". Both records represent one and the same transaction. In order not to enter this transaction twice I would like to "automate" this process so that once I enter the transaction in either of the two table (checking or cash) the matching entry automatically appears in the other table. Is there any way to do this.
Thank you,
Evgeny

Evgeny, you got me on this one. It is easy to transfer an entry to another table if you aren't also making manual entries in the other table. It gets difficult when you want to be able to make manual entries in both tables, you would like the entries to be in order (by date I assume) and when you want entries to duplicate in both directions, depending on which table you made the entry. Or maybe it's easy and I just haven't got it yet. If I come up with something I'll post it here. Right now I'm stumped.

Similar Messages

Sample code to find duplicated entries in internal table and mark them?

We have one internal table called itab1 which contains the following fields:
f1 (key field)
f2 (non-key field)
f3 (non-key field)
The business scenario is f1, f2, and f3 are one to one relationship to each other, or in other word, f2 or f3 can't be duplicated with the the same values for different f1 (key field) records. We will move the check result of the duplication into another internal table itab2 which contains f1, f2, f3, f4, and f5 where f1, f2, and f3 are the same ones as in itab1, f4 will get the value "Yes" to mark duplicated for f2 (or "No" to mark non-duplicated), and f5 will get the value "Yes" to mark duplicated for f3 (or "No" to mark non-duplicated).
We know that through the loop of itab1, the above logic can be done to fill in f4 and f5 value for each row with either "Yes" or "No".
Just give an example of how itab2 will look like after the coding:
f1----f2--f3--f4(f2 duplicated?)---f5(f3 duplicated?)
A----01-X0YesNo--
B----01-X1YesYes--
C----02-X1NoYes--
Could any ABAP expert here show us the sample code to generate itab2 in loop of itab1 to find the duplicated entries of f2 and f3 and then populated the corresponding row values for f4 and f5 with "Yes" or "No"? We will give you reward points!

TYPES: BEGIN OF ty_1,
f1,
f2(2),
f3(2),
f4,
f5,
END OF ty_1.
TYPES: BEGIN OF ty_2,
type(2),
value(2),
END OF ty_2.
DATA: itab1 TYPE STANDARD TABLE OF ty_1 WITH HEADER LINE,
      itab2 TYPE TABLE OF ty_2 WITH HEADER LINE.
DATA: f2_c TYPE sy-tabix VALUE 0,
     f3_c TYPE sy-tabix VALUE 0,
     curr_f2 LIKE itab1-f2,
     curr_f3 LIKE itab1-f3.
itab1-f1 = 'A'.
itab1-f2 = '01'.
itab1-f3 = 'X0'.
APPEND itab1.
itab1-f1 = 'B'.
itab1-f2 = '01'.
itab1-f3 = 'X1'.
APPEND itab1.
itab1-f1 = 'C'.
itab1-f2 = '02'.
itab1-f3 = 'X1'.
APPEND itab1.
SORT itab1 BY f1 f2 f3 AS TEXT.
LOOP AT itab1.
IF sy-tabix EQ 1.
    curr_f2 = itab1-f2.
    curr_f3 = itab1-f3.
ENDIF.
IF itab1-f2 NE curr_f2.
    f2_c = 0.
    curr_f2 = itab1-f2.
ENDIF.
IF itab1-f3 NE curr_f3.
    f3_c = 0.
    curr_f3 = itab1-f3.
ENDIF.
f2_c = f2_c + 1.
f3_c = f3_c + 1.
IF f2_c > 1.
    itab1-f4 = 'X'.
    MODIFY itab1.
    itab2-type = 'f2'.
    itab2-value = itab1-f2.
    APPEND itab2.
ENDIF.
IF f3_c > 1.
    itab1-f5 = 'X'.
    MODIFY itab1.
    itab2-type = 'f3'.
    itab2-value = itab1-f3.
    APPEND itab2.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab2.
LOOP AT itab2.
IF itab2-type = 'f2'.
    LOOP AT itab1 WHERE f2 = itab2-value AND f4 NE 'X'.
      itab1-f4 = 'X'.
      MODIFY itab1.
    ENDLOOP.
ELSE.
    LOOP AT itab1 WHERE f3 = itab2-value AND f5 NE 'X'.
      itab1-f5 = 'X'.
      MODIFY itab1.
    ENDLOOP.
ENDIF.
ENDLOOP.
Edited by: Ramiro Escamilla on Apr 5, 2008 1:45 AM
changed the code, now should work

Duplicated entries in BSIK using Logical Database KDF

Hello everyone,
I'm using Logical Database KDF to retrieve some data, but i'm getting duplicated entries when getting to BSIK. Can anyone point out in my program what could i be doing wrong?
If i put a breakpoint in the line immediatly below GET bsik, i can watch several entries being duplicated.
                                     Thanks in advance to everyone,
                                                   Nuno
START-OF-SELECTION.
GET lfa1.
MOVE-CORRESPONDING lfa1 TO t_alv.
GET lfb1.
GET bsik.
MOVE-CORRESPONDING bsik TO t_alv.
CLEAR bkpf.
SELECT SINGLE * FROM bkpf CLIENT SPECIFIED
         WHERE mandt = syst-mandt
         AND    bukrs = bsik-bukrs
         AND    belnr = bsik-belnr
         AND    gjahr = bsik-gjahr.
t_alv-xblnr = bkpf-xblnr.
SELECT        * FROM bset CLIENT SPECIFIED
         WHERE mandt = syst-mandt
         AND    bukrs = bsik-bukrs
         AND    belnr = bsik-belnr
         AND    gjahr = bsik-gjahr.
     t_alv-mwskz = bset-mwskz.
      t_alv-hwbas = bset-hwbas.
      t_alv-hwste = bset-hwste.
      t_alv-dmbtr = bset-hwbas + bset-hwste.
      t_alv-stceg = lfa1-stceg.
    APPEND t_alv.
ENDSELECT.

Hello Nuno Centeio ,
                                  According to the table definition there can be more than one entries for a vendor based on the table key definition.
Thanks,
Greetson

Duplicated entries in the Library-Runbooks section

Hi
We recently changed the URL where SCSM should read the SCO Runbooks from.
However, after we initiated a new SCO connector sync, the Library is populated with duplicate entries, from both the old URL and the new URL (see the screenshot below).
From the SCSM gui, Im not able to delete the entries (the Delete option is greyed out, I'm connected as the scsm adminaccount)
Also, when I look in the SQL db of SCO, in the Resources table, there are duplicate entries.
I thought I may fix the problem by deleting the old entries from the SCO SQL-table, but the URL-field that I find in scsm, is not present in the SQL-table.
Anyone that have a suggestion how I might be able to proceed with my plan, or that have other solutions on the problem?
Env.:
SCSM / SCO 2012 SP1-RU7, SQL 2K12 Ent.(latest build)
Thanks in advance.
/Peter

Didn't help, sadly.
I fixed it by doing a calculated guess and deleted one of each of the duplicated entries in the SCO DB in the "Microsoft.SystemCenter.Orchestrator.Internal.Resources" table.
Missed a few so I had to reimport those runbooks, and delete the other on instead
After the last connector-sync in scsm, we only have one entry of each.

Unable to display data no entry in the table without using Model clause

Hi,
I've an urgent requirement described below :
The previously posted Question has been answerted using Model Clause:
Is there any way out to solve it without using Model clause:
I've a table named as "sale" consisting of three columns : empno, sale_amt and sale_date.
(Please ref. The table script with data as given below)
Now if I execute the query :
"select trunc(sale_date) sale_date, sum(sale_amt) total_sale from sale group by trunc(sale_date) order by 1"
then it displays the data for the dates of which there is an entry in that table. But it does not display data for the
date of which there is no entry in that table.
If you run the Table script with data in your schema, then u'll see that there is no entry for 28th. Nov. 2009 in
sale table. Now the above query displays data for rest of the dates as its are in sale table except for 28th. Nov. 2009.
But I need its presence in the query output with a value of "sale_date" as "28th. Nov. 2009" and that of "total_sale" as
"0".
Is there any means to get the result as I require?
Please help ASAP.
Thanks in advance.
Create table script with data:
CREATE TABLE SALE
EMPNO NUMBER,
SALE_AMT NUMBER,
SALE_DATE DATE
SET DEFINE OFF;
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('12/01/2009 10:20:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/30/2009 10:21:04', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/29/2009 10:21:05', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/26/2009 10:21:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/25/2009 10:21:07', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 5000, TO_DATE('11/27/2009 10:23:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 4000, TO_DATE('11/29/2009 10:23:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 3000, TO_DATE('11/24/2009 10:23:09', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 2000, TO_DATE('11/30/2009 10:23:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 7000, TO_DATE('11/24/2009 10:24:19', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 5000, TO_DATE('11/25/2009 10:24:20', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 3000, TO_DATE('11/27/2009 10:24:21', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 2000, TO_DATE('11/29/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 1000, TO_DATE('11/30/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
Any help will be needful for me
Regards,

select sale_date,sum(sale_amt) total_sale
from
select empno,0 sale_amt,(sale_date + ao.rn) sale_date
from
select empno,sale_amt,sale_date ,(t.nxt_dt - t.sale_date) diff
from
select empno
,sale_amt,trunc(sale_date) sale_date
,trunc(nvl(lead(sale_date) over (partition by 1 order by sale_date),sale_date)) nxt_dt
from sale
) t
where (t.nxt_dt - t.sale_date) >1
) rec,(select rownum rn from user_objects where rownum<=200) ao
where ao.rn <=(rec.diff-1)
union all
select empno,sale_amt,trunc(sale_date) sale_date
from sale
group by sale_date
order by 1;
~~~~Guess this will serve the purpose...
Cheers Arpan

How to schedule a job poles for a entry in a table.

Hi All ,
I have to schedule a job which runs somw stored procedures only on sunday and monday of a week at 3 AM in the morning.
The condition is that another application puts an entry into a table around 3 AM (some times before and some times late), now my should query
count in the table and runs the procs , however once its done ,it should do it monday and then it should not run till next sunday.
I have successfully created a job which keeps failing till it receives the entry and successfully runs the proc once the entry is there...
However how to schedule this thing ..correctly I need help , I want this job to disable itself on sunday once the procs are run wake up next morning
run again..and then next week ..
Following is the job ,
BEGIN
-- Job defined entirely by the CREATE JOB procedure.
DBMS_SCHEDULER.create_job (
job_name => 'TESTING_FIRST_JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN SEODS.test_procedure_11292011(); END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'freq=minutely; byminute=5',
end_date => NULL,
enabled => TRUE,
comments => 'Job defined entirely by the CREATE JOB procedure.');
end;
=====================================================
and following is the proc...
create or replace
procedure
test_procedure_11292011 as
var number;
begin
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS STARTED SUCCESSFULLY');
commit;
SELECT COUNT(*)
INTO var
FROM seods.student_weekend_status;
if var=0 then
raise_application_error(-20101, 'There is no record in the student_weekend_status table');
else
all_realtime();
end if;
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS FINISHED SUCCESSFULLY');
commit;
end;
Thanks in advance , please help

Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support

How to delete the entries in CDCLS table

Hi All,
There is a potential issue with the size of table CDCLS on production system. We need to reduce or manage the amount of data in this table. CDCLS is a cluster table and cannot be reduced directly,
So first we were reduced the entries in CDHDR and then from CDPOS tables.
After that we tried to reduce the entries from CDCLS table through the program - RSSCD7RE, We are facing the error as - no data available and No active archive key was selected.
Please help me out, how to proceed further in this task. Thanks in advance.

Go to DB15 and see the archiving object.
You can also use the archiving object CHANGEDOCU, please refer SAP documents for that.
Transaction is
SARA -> Archive object CHANGEDOCU
Message was edited by:
ANIRUDDHA DAS

How to delete the NULL entries in nest table

Hi,
After I used a loop and open/fetch cursor populated the object table
I found there are random NULL entries in my object table (nest table)
The data look like this
NULL NULL NULL
NULL NULL NULL
123 03-MAY-04 ACTIVE
NULL NULL NULL
NULL NULL NULL
234 21-MAY-04 ACTIVE
NULL NULL NULL
345 11-MAY-04 ACTIVE
NULL NULL NULL
How can I get rid of those NULL entries in my nest table? So it can become
123 03-MAY-04 ACTIVE
234 21-MAY-04 ACTIVE
345 11-MAY-04 ACTIVE
Additional info:
create type myType as object
(id NUMBER (10,0),
eff_date date,
status VARCHAR2(17)
create type myNestTab as table of myType;
I have tried Delete procedure in following two ways.
Version 1:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i).id IS NULL THEN
l_curr_event_tb.DELETE(i);
 END IF;
END LOOP;
Version 2:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i) IS NULL THEN
l_curr_event_tb.DELETE(i);
 END IF;
END LOOP;
Both of them give me the error no data found. And only left me the first NOT NULL entry in the table.
123 03-MAY-04 ACTIVE
Thanks in avdance.

Hi Vishnu,
u can write a report program for this and in that use the event :
AT NEW <field-name> ( use primary key)
your statements
ENDAT
for eg.
loop at itab ( herfe itab must be of type of table for which u want to track new entries)
at new matnr
write:/ new record
endat
endloop.
schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
regards
Vinod

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Error in Sales Order idoc - No appropriate entry found in table ADRT

Hello SAP Gurus,
When I am retriggering a sales order idoc I am getting the following error message.
No appropriate entry found in table ADRT
How can I resolve this issue.
Thanks,
Narayan.

Hello Lakshmipati,
I have checked up the customer master. There was no communication method maintained for any of the customers.
But even then the order idoc is triggered to our XI system.
For the one that failed I have maintained the communication method and retriggered again. It had the same failure message.
Any helpful thoughts is highly appreciated.
Thanks & Regards,
Narayan.

How to populate multiple entries to Bapi Table

Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
 int size = wdContext.nodeApplicants().size();
 for(int i = 0 ; i < size ; i++)
 String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
 if(isselected == "true")
 com.models.veteranpoint.Zrecr_Aplno appid = new
 com.models.veteranpoint.Zrecr_Aplno();
 appid.setAppl_Number(wdContext.nodeApplicants().
 getApplicantsElementAt(i).getAppl_Number());
 request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi s

Hi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);
Step 5:
wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();
Regards,
Viji Priya

BPM question - Delete all entries in a table and Insert data

Hello,
I'm new to PI BPM and have this scenario to implement.
I'm supposed to delete all entries in a table and then insert data to the same table.
Is BPM necessary? If it is, what is the best practice to implement my scenario?
I want to make sure that all entries were successfully deleted before insert data.
How do I check if all entries in the table were deleted successfully before
initiating insert.
Thank you.
-Won

Hi Won,
Yes, this is possible without BPM.
You have to create 2 separate mappings, each for deleting & inserting the records.
You will have 2 different Interface mappings as well.
But in ID, create a single interface determination.
In that, configure Deletion interface mapping first and in the second row, configure Insertion interface mapping.
Please make sure that the parameter 'Mainain Order At runtime' is checked in interface determination.
-Supriya.

Unable to create PR with Service Line & also no entry in ESLH table using

Hi Experts,
I am using BAPI => BAPI_REQUISITION_CREATE to create PR and it is successful to create PR but when I try to create PO is become fail (proably missing entry in ESLH table).
Now my requirement is to create PR with Service Line and an entry in ESLH table (should be filled by SAP automatically). I have been passing the service related/account assigment tables into BAPI but still not working.
Will you please give a solution to create PR with Service Line and also need an entry in ESLH table (its important to my req)?
Also provide some input on Service Line, if possible(How to check Service Line for PR + Account Assignment to Service Line + etc.)?
Note that: If I create PR manually then there have entry in ESLH and hence I can create PO.
Definately the quick solution help me lot...
Thanks
AKG

Hi Experts,
I am using BAPI => BAPI_REQUISITION_CREATE to create PR and it is successful to create PR but when I try to create PO is become fail (proably missing entry in ESLH table).
Now my requirement is to create PR with Service Line and an entry in ESLH table (should be filled by SAP automatically). I have been passing the service related/account assigment tables into BAPI but still not working.
Will you please give a solution to create PR with Service Line and also need an entry in ESLH table (its important to my req)?
Also provide some input on Service Line, if possible(How to check Service Line for PR + Account Assignment to Service Line + etc.)?
Note that: If I create PR manually then there have entry in ESLH and hence I can create PO.
Definately the quick solution help me lot...
Thanks
AKG

Unable to delete last entry in Custom table

Hi,
I have one custom table which allows only some specific entries to be maintained in the table.I have used a standard table as a check table for dis.I found no issue while maintaining entries in the table.But when i try to delete the last entry in the table i get the message "No entry exist".Long textNo entries were found when importing data from the database.
Kindly help.

Hi,
If it is not possible through table maintainence then write a small Z program to delete the entries in devlopment system and then if then if you want you can transfer those to other systems.
delete from ZTABLE where {give your condition for the last record}.
Regards,
Sandipan

CUA: Wrong entries in the table USZBVSYS

Hi All,
While searching a particular user access to the child systems via SUIM - > Users by system, the report given output that the user have access to so and so system. Whereas that user already deleted and there is no user account in CUA and the respective child system.
When i search in the table USZBVSYS, that user having a entry to that child system with status S.
May be due to some old IDOC get processed and made an entry in this table but physical the changes were not made either in CUA or in child system.
Now my concern is how to delete such type of entries in the table USZBVSYS?
SAP recommended not to use the report RSUSR_CUA_CLEANUP_USZBVSYS and i think it can be resolve only by manually method to create and delete.
Kindly let me know you opinion pls.

Hi,
RSUSR_CUA_CLEANUP_USZBVSYS cannot work in this case, as you have 'S'-entries for the user section in uszbvsys. The report will clean up only entries with D,A or X entry for the user entry.
So there seems to be no automated standard report for your query.
I suggest to collect the user-IDs you need to remove, copy them into SU10, recreate them for the required systems and delete them
afterwards again.
Make sure, that nobody processes cua-idocs manually in any of your systems of the cua. Only use scul.
b.rgds, Bernhard

Duplicating entry in 2 tables

Similar Messages

Maybe you are looking for