Duplicating Rule Anomaly
In CS3, I am duplicating a .3 pt stroke line by option dragging and once finished the line now becomes a 1 pt stroke. It happens sporadically with the project that I am currently involved. Not really looking for a solution, and not sure that it is a bug. But a heads up for anyone that comes across this.
Technically, you could to this in the start routine by appending lines to datapak.
But in your case you have to know whether the po has invoice or not before hand. Looks like you have to load EKBE information into ODS and activate ODS data before you load EKKO & EKPO information so that you can lookup the ODS to set RECORDMODE TO 'D'.
Kumar Gudiseva.
Similar Messages
-
Source Account Validation Report
Goodmorning,
I'm building source validation rules (without problem) but a boring problem occurs:
Scenario:
Location -- E2 (source entity:00002)
|__ E6 (source entity:00006)
|__ E7 (source entity:00007)
Validation report result:
E2
Rule 1 amount 123
Rule 2 amount 456
Rule 3 (source logic account based on 00002 accounts) 789
E6
Rule 1 amount 1000 (OK)
Rule 2 amount 5000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
E7
Rule 1 amount 8000 (OK)
Rule 2 amount 9000 (OK)
Rule 3 (source logic account based on 00002 accounts) 789 [duplicated]
This means that for every rule based on source account and for every Entity I've a duplicated rule.
Obviously it's wrong and I know I need source entity (00002) to build correctly my source validation rule...
Q: how can I solve this issue avoiding duplicated rules? Building the same validation rule respectively for every source entity logic account the result would be an undesired report with 9 rules instead of 3.
Thanks,
FrancescoWhat version was this on and did you use assign Validation Entity and Rule groups?
-
SAS vs Oracle comparison for statistical modeling
Hi,
I am working on a project that require a lot of statistical analysis. as we are in a preliminary phase of determining which way to go, someone recommended to use SAS.
would you be able to share your experience/comments related to SAS vs Oracle comparison when it comes down to using statistical models within each of these applications. and is there a list of all statistical models that Oracle offers (it could be handy to compare it with our requirements.)
Plus, would also like to know if there is a way to test these models... just like APEX is offered free for testing purposes @ apex.oracle.com
Thanks in advanceYou don't go into much detail regarding what types of statistical technques that you might want to use. First, Oracle both partners with SAS and competes and SAS. In terms of Oracle technology for statistics and models, we ship about 50 basic statistical technques with EVERY Oracle Database for free. Those stats include below. See SQL Reference Guide for details:
Descriptive Statistics
DBMS_STAT_FUNCS: summarizes numerical columns of a table and returns count, min, max, range, mean, median, stats_mode, variance, standard deviation, quantile values, +/- n sigma values, top/bottom 5 values
Correlations
Pearson’s correlation coefficients, Spearman's and Kendall's (both nonparametric).
Cross Tabs
Enhanced with % statistics: chi squared, phi coefficient, Cramer's V, contingency coefficient, Cohen's kappa
Hypothesis Testing
Student t-test , F-test, Binomial test, Wilcoxon Signed Ranks test, Chi-square, Mann Whitney test, Kolmogorov-Smirnov test, One-way ANOVA
Distribution Fitting
Ranking functions
rank, dense_rank, cume_dist, percent_rank, ntile
Window Aggregate functions (moving & cumulative)
Avg, sum, min, max, count, variance, stddev, first_value, last_value
LAG/LEAD functions
Direct inter-row reference using offsets
Reporting Aggregate functions
Sum, avg, min, max, variance, stddev, count, ratio_to_report
Statistical Aggregates
Correlation, linear regression family, covariance
Linear regression
Fitting of an ordinary-least-squares regression line to a set of number pairs.
Frequently combined with the COVAR_POP, COVAR_SAMP, and CORR functions
Kolmogorov-Smirnov Test, Anderson-Darling Test, Chi-Squared Test, Normal, Uniform, Weibull, Exponential
Additionally, Oracle has a Database Option called Oracle Advanced Analytics which delivers 12+ hi-performance, data mining algorithms (e.g. clustering, decision trees, regression, association rules, anomaly detection, text mining, etc.) as native SQL functions that can be called from SQL, the R language or the Oracle Data Miner workflow GUI (ships with SQL Developer). There is a LOT more information on the OAA Option here http://www.oracle.com/technetwork/database/options/advanced-analytics/index.html?ssSourceSiteId=ocomen.
Hope this helps. cb -
Is there any repository with old(er) versions of packages? I just installed the latest udev (0.57), and it broke my palm-pilot connectivity. It looks like a bug:
May 4 10:50:40 HAL udev[8910]: udev_db.c: unable to read db file '/dev/.udevdb/class@tty@ttyUSB0'
May 4 10:50:40 HAL udev[8910]: udev_remove.c: 'ttyUSB0' not found in database, falling back on default name
May 4 10:50:40 HAL visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
May 4 10:50:40 HAL visor 1-1:1.0: device disconnected
May 4 10:50:40 HAL udev[8929]: udev_db.c: unable to read db file '/dev/.udevdb/class@tty@ttyUSB1'
May 4 10:50:40 HAL udev[8929]: udev_remove.c: 'ttyUSB1' not found in database, falling back on default name
May 4 10:53:35 HAL ohci_hcd 0000:00:02.0: wakeup
May 4 10:53:36 HAL usb 1-1: new full speed USB device using ohci_hcd and address 5
I don't have time to investigate into that now, and I'd like to get a previous version of udev that worked fine.mdk wrote:Thanks, I managed to solve my issues with udev 0.57. Duplicated rules were the problematic part.
hi, mdk, i got the same problem as well. Which rules are u talking about that are duplicated that caused the problem? Is it possible to fix it in udev 0.58 (the version that i am having a problem with)? -
Handling MARS's "System Rule: Misc. Attacks: TCP/IP Protocol Anomaly"
i have a IPS 4260 monitoring 4 inline links, connecting to a MARS 20.
MARS having been reporting a large amount of TCP related alerts over WAN; ie:
-TCP packet with segment out of order,
-TCP packet out of state order,
-TCP segment out of window,
-TCP Packet With Bad Checksum
Can anyone advice on the best practise or how should i assess and handle these situation?
Thanks
cashEven if you decide to continue to alert on this sigantures, I would recommend creating a drop rule with "log to db only" for these alarms. They occur too often in "normal" traffic for them to be useful.
-
Can I migrate rules from one account in Mail to another?
In mail I have 90 rules, many multi line criteria. I have just created a new imap account linked to fastmail. My rules wont run because they seem to be linked to my first account, not imap. I tried just duplicating them and re-mapping to the new "move to" folder. Wouldn't run. Added a new criteria for the account but then all mail will go to that folder since 90 rules include that account in the rule. This would work if there was 2 levels of logic in the IF command but alas its only IF ANY/ALL.
I really don't want to re-write all my rules as some have maybe 10 lines of criteria in them. Any suggestions?Transferring files from one User Account to another
-
Mail rules not copied to new MacPro via iCloud
Hi All,
I have a new MacPro that is replacing an older MacPro that was running Mavericks 10.9.5. I also have a Macbook Air running Mavericks 10.9.5.
For a host of reasons, I decided not to simply use Migration Assistant on this new MacPro, but to copy individual plist files for apps such as Mail. The two plists that I was interested in recreating on this new setup were the MessageRules plist and the SmartFolders plist. Interestingly these two kinds of preferences seem to be shared across MacOS devices via iCloud.
However, in both instances (iCloud syncing or manually copying over the old plist file), I cannot get my install of Apple Mail to read the plists. Nor are the shared preferences shared with this computer. Apple tech support was not much help saying their hands are tied because of Apple Engineering. Never heard that one before.
Thanks in advance to whomever can spare me from having to manually recreate a hundred or so rules and 20 or so smart mailboxes.The messages coming to mail app. on my iMac & macbook pro were not showing up on my 5 devices if the sender had a "move to" a folder command on the 'rules' in Mail 'Preferences'.
After trying every suggestion I could find on this forum in addition to some of my own, I realized the only thing that worked was my changing the "move to" command to "copy to" command. This work around resulted in duplicating all the emails, one in the "inbox" and the "copied" one to it's proper folder ! When I proceeded to delete the emails from the "inbox" as I had set up the "copy to" rule and they were all in their proper folders. I came across another change to the mail system after iOS 8.1 ; if one deletes the emails in the "inbox" on the mac they get deleted across the board from all your devices and vice versa !! I was on telephone with Apple "Senior" techs for 2 frustrating days and eventually they said there is nothing they can do, it had been changed by the "Engineers", something to do with changing "pop" to "imap" protocol. Now I have to put up with all my email being in the inbox with no option to organize them or delete them if I want them to appear on my devices. This is outrageous !! -
[SOLVED] udev rule no longer working
I have a udev rule set up to automatically mount an ext4 filesystem when I plug a certain thumb drive in. It was working fine until yesterday (probably due to updates). Here is the rule, in file /etc/udev/rules.d/99-gfk.rules:
KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", SYMLINK+="gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mkdir /media/gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mount -t ext4 -o ro,nosuid,nodev,noexec,noatime /dev/gfshare /media/gfshare"
The symlink and the mkdir command are both working fine, but the mount command is not being run for some reason. If I manually run the mount command it works fine. Some possibly helpful output:
# pacman -Qo $(which udevadm)
/usr/bin/udevadm is owned by systemd 212-1
# dmesg |tail -16
[26458.120628] usb 7-1.3: new high-speed USB device number 7 using ehci-pci
[26458.223059] usb-storage 7-1.3:1.0: USB Mass Storage device detected
[26458.223825] scsi10 : usb-storage 7-1.3:1.0
[26459.311607] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[26460.834081] sd 10:0:0:0: [sdd] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
[26460.834931] sd 10:0:0:0: [sdd] Write Protect is off
[26460.834935] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
[26460.835617] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.835621] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.839455] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.839460] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.860579] sdd: sdd1 sdd2
[26460.867111] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.867115] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.867118] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[26461.041982] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
# udevadm test /sys/bus/usb/devices/7-1.3
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'usb_id' /usr/lib/udev/rules.d/50-udev-default.rules:9
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:9
MODE 0664 /usr/lib/udev/rules.d/50-udev-default.rules:37
GROUP 1002 /usr/lib/udev/rules.d/51-android.rules:387
MODE 0660 /usr/lib/udev/rules.d/51-android.rules:387
RUN '/usr/share/virtualbox/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass} vboxusers' /usr/lib/udev/rules.d/60-vboxdrv.rules:6
PROGRAM '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' /usr/lib/udev/rules.d/69-libmtp.rules:1204
starting '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'(out) '0'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' [24644] exit with return code 0
IMPORT builtin 'path_id' /usr/lib/udev/rules.d/71-seat.rules:43
RUN 'uaccess' /usr/lib/udev/rules.d/73-seat-late.rules:15
handling device node '/dev/bus/usb/007/007', devnum=c189:774, mode=0660, uid=0, gid=1002
preserve permissions /dev/bus/usb/007/007, 020660, uid=0, gid=1002
preserve already existing symlink '/dev/char/189:774' to '../bus/usb/007/007'
ACTION=add
BUSNUM=007
DEVNAME=/dev/bus/usb/007/007
DEVNUM=007
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3
DEVTYPE=usb_device
DRIVER=usb
ID_BUS=usb
ID_DRIVE_THUMB=1
ID_FOR_SEAT=usb-pci-0000_00_1a_7-usb-0_1_3
ID_MODEL=DataTraveler_2.0
ID_MODEL_ENC=DataTraveler\x202.0
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_MODEL_ID=6545
ID_PATH=pci-0000:00:1a.7-usb-0:1.3
ID_PATH_TAG=pci-0000_00_1a_7-usb-0_1_3
ID_REVISION=0100
ID_SERIAL=Kingston_DataTraveler_2.0_1C6F654E4041ED601910053F
ID_SERIAL_SHORT=1C6F654E4041ED601910053F
ID_USB_INTERFACES=:080650:
ID_VENDOR=Kingston
ID_VENDOR_ENC=Kingston
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
ID_VENDOR_ID=0930
MAJOR=189
MINOR=774
PRODUCT=930/6545/100
SUBSYSTEM=usb
TAGS=:seat:uaccess:
TYPE=0/0/0
USEC_INITIALIZED=26452326568
adb_user=yes
run: '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 774 00 vboxusers'
run: 'uaccess'
unload module index
Unloaded link configuration context
# udevadm test /sys/bus/usb/devices/7-1.3:1.0
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:11
RUN 'kmod load $env{MODALIAS}' /usr/lib/udev/rules.d/80-drivers.rules:5
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3/7-1.3:1.0
DEVTYPE=usb_interface
DRIVER=usb-storage
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
INTERFACE=8/6/80
MODALIAS=usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00
PRODUCT=930/6545/100
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=452326811
run: 'kmod load usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00'
unload module index
Unloaded link configuration context
Last edited by bentglasstube (2014-04-03 20:51:36)I see. That is somewhat aggravating but I will find another way to achieve what I wanted I suppose.
Thank you. Should I mark this is solved or unsolvable or something? Sorry, I'm new to posting on these forums.
Edit: I was able to achieve what I wanted with udevil as recommended by the wiki.
Last edited by bentglasstube (2014-04-03 20:55:45) -
How to populate OIM Rules automatically ?
Hello experts,
We have a requirement to populate set of values from a flat file to OIM Rule in 11g. Is there any API to do that operation ?
Consider flat file has some 100 records of "jobCode" as follows
123
456
789
We need to create a single OIM rule called "Rule for X" which should have following OR conditions
jobCode == 123
jobCode == 456
jobCode == 789
jobCode == .....
jobCode == .....
Your input at the earliest would be helpful.
Thanks in advanceIn my 5+ years of working with OIM, never have we decided to use APIs to create rules, or access policies. These should be defined items within your system, and not generated on the fly. Each policy will need the appropriate test cases in place to your functionality all works, so it's not like you would be created a new policy without ever testing it.
What we have done is created XML templates during our development process that we knew would be duplicated, so we had a script that would generate a new xml file with the new information provided. You need to look at what pieces are common across your policies and create your templates around these. Then provide the input for the others. For example, if you know you have multiple child table entries in your policy, you need to make sure you generate the section of the XML file for each new entry. You will probably need different templates for different objects because they will have different field names within your xml file for the process form they are tied to.
Another option, within 11g, is to use the connector lifecycle functionality and define a new xml file as a connector, and then test using the clone piece to generate a new xml with new objects in it. I've never tried this for access policies, but it works for resource workflows.
You're going to have to be creating and think about what solution works best for you. You'll need to play around with the code and figure out which one you can do and manage.
-Kevin -
ABAP assistance - start routine logic in update rule
I have used an existing update rule and have based my logic around the same. The purpose of the rule is to look up customer master data and get a subset of customer numbers from the transaction records so that the values for customer number from the transactional data will not be updated if it does not match with existing master data customer numbers.
The loads are full and we drop the data before we load.
I have listed the logic below (the number at the front is to be considered as the line number) and a list of open questions that I have thereafter:
Start routine logic:
1 DATA: l_index LIKE sy-tabix.
2 DATA: BEGIN OF ls_customer,
3 customer TYPE /BI0/OICUSTOMER,
4 objver TYPE RSOBJVERS,
5 END OF ls_customer,
6 lt_customer LIKE TABLE OF ls_customer.
7 REFRESH: lt_customer.
8 LOOP AT DATA_PACKAGE.
all customers from data package
9 ls_customer-custno = DATA_PACKAGE-custid.
10 ls_customer-objver = 'A'
11 APPEND ls_customer TO lt_customer.
12 ENDLOOP.
12 SORT lt_customer.
13 DELETE ADJACENT DUPLICATES FROM lt_customer.
14 IF NOT lt_customer[] IS INITIAL.
15 SELECT /BI0/OICUSTOMER RSOBJVERS
16 FROM /BI0/PCUSTOMER
17 INTO CORRESPONDING FIELDS OF TABLE lt_customer
18 FOR ALL ENTRIES IN lt_customer
19 WHERE ls_customer-custno = DATA_PACKAGE-custid
20 AND ls_customer-objver = 'A'
21 SORT lt_customer BY customer ASCENDING
22 ENDIF.
Questions
Line
1 - what is the purpose of this line? What is it that is being declared
2 - in some code I have seen this line with OCCURS 0 at the end what does this mean with and without the term?
4 - I am using the Data Element name is this correct or should I use the field name?
3 - 5 here I declare an internal structure/table is that correct?
6 - here I declare a work area based on the internal table is that correct?
7 - What would happen if I avoided using the REFRESH statement?
8 - 12 - Is this syntactically correct, I am trying to get a set of data which is the customer numbers which match the master data customers and the master data record is án active version and than appendíng to the work area?
13 - My understanding is this will reduce the number of records in the work area is this correct and needed?
14 - 22 I am trying to identify my required set of data but feel I am repeating myself, could someone advise?
Finally what logic would I actually need to write in the key figure object, could I use something like:
Result = lt_customer.
Thanks
Edited by: Niten Shah on Jun 30, 2008 8:06 PM1. This line is not required
2. OCCURS 0 is the OLD way of defining an internal table with that structure. As it is, it just defines a flat structure.
3. Data element is usually best
3-5 Yes
6. No. Here you are declaring a table of the type of the flat structure. Just as the ABAP says!
7. Nothing. But by putting this in, you ensure that you know the state of the table (empty) before you start looping through the data package
8-12. You can tell if it is syntactically correct by pressing Ctrl-F2 when in the editor. Looks ok.
13. Ensures your list of customers contains no duplicated. The code up to this point is building a list of all the unique customers in the data package.
14-22. Goes to the database and brings back ONLY those customers which are found in the master data. Looks ok.
This is a start routine (that's why you've got a data package). You don't use result. You should update the datapackage. But this you haven't done. Double click on the table name /BIC/PCUSTOMER to get the correct field names.
So you have to loop through the data package again, and check if the customer in the datapackage is lt_customer. If it is, fine, otherwise you blank it and report an error, or set an error message or whatever.
I wouldn't do it like this. I'd do something like this:
STATICS: st_customer TYPE HASHED TABLE OF TYPE /bi0/oicustomer
WITH UNIQUE KEY TABLE_LINE.
* st_customer retains its value between calls, so only populate if empty
* In one run of the infopackage, this will mean you do only one read of
* the master data, so very efficient.
IF st_customer IS INITIAL.
SELECT customer FROM /BI0/PCUSTOMER
INTO TABLE st_customer
WHERE objvers EQ 'A'. " Only active values
ENDIF.
* Go through data package
LOOP AT DATA_PACKAGE.
* Check whether the customer exists.
READ TABLE st_customer TRANSPORTING NO FIELDS
WITH TABLE KEY table_line = DATA_PACKAGE-custid.
CHECK sy-subrc IS NOT INITIAL.
* If you get here, the customer isn't valid. So I'm just setting it blank
CLEAR DATA_PACKAGE-custid.
MODIFY DATA_PACKAGE. " Updates the datapackage record
ENDLOOP.
Even this is not fully optimised, but it's not bad.
I strongly suggest that you get yourself sent on the basic ABAP programming course if you're going to do a lot of this. Otherwise, read the ABAP documentation in the help.sap.com, and, from the editor, get the cursor on each ABAP keyword and press F1 to read the ABAP help.
matt -
Problem with balance carry forward business rule and automatic adjustments
Hi All,
I faced with issue when run BCF business rule and consolidation process. According sap courses BPC440 members with A(automatic adjustments) type should carry forward automatically, and I(imputable), M (adjustments) members should carry forwarded by bcf business rule.
When I set up my BCF business rule I use property "Category_for_ope" in Category dimension. But this rule not work properly, then I use notes:
1784365 - Category_for_ope property should not effect Consolidation.
1902677 - The property category_for_ope shall work for consolidation
After applying those notes, system work as I aspect. After i run consolidation first time system carry forward my automatic adjustment from Category "Expected" to "PLAN_Y0" and this is correct!!!. But when i run consolidation process second and third time system duplicated automatic adjustments in Category "PLAN_Y0".
Someone can help me with this Issue?
And sorry for my englishHi,
Can you try as follows :
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
hope it helps...
regards,
Raju -
Functions/Risks/Rules update recommendadtion
Hello colleagues,
Recently I have started to work with RAR(CC) tightly. Some points are uncleared for me and I would very appreciated for some helps and advices.
We performed post-installation steps for RAR (uploaded SAPObjects, BP, Functions, Rules and so on). The first my question is reqarding daily support system.
1) May we upload own files with actions and permissions which made by concotenation of standard actions/permissions files with our actions/permissions files? Or we have to manage via RAR interface?
1.1 In case if we can upload own files, would it rewrite existing information or add missing information?
1.2 Why standard files(actions, permissions) content duplicated information? For example, tcode F.13 contains in action file and permission file. Would it be enough to include F.13 (tcode and auth. objects) only in permission file?
2) Regarding question #1, should we run rule generation reports every time after changing:
2.1 If we add new BP, Function
2.2 If we don't change BP, Functions, but add new transactions/permissions to Functions
3) Is it possible to perform risk analysis during run of Rule Generation job (config -> log. systems -> generate rules)?
4) How to restrict number of rules if we get message like this:
Risk: M014 has exceeded the maximum number of rules (46,655) that can be generated
Regards,
Artem IvashkinArtem
yes all your questions are related to rules.
request you to divide them in two part and create new thread ...
that will be very helpful
Regarding :
) May we upload own files with actions and permissions which made by concotenation of standard actions/permissions files with our actions/permissions files? Or we have to manage via RAR interface?
"yes you can upload your own files, by modifiying the standard rule file. However be very cautious, the rate of error is very high. And extra TAB or RETURN and your rules will not be generated"
1.1 In case if we can upload own files, would it rewrite existing information or add missing information?
"Yes it will overwrite existing data"
1.2 Why standard files(actions, permissions) content duplicated information? For example, tcode F.13 contains in action file and permission file. Would it be enough to include F.13 (tcode and auth. objects) only in permission file?
"that is must, the program which generate rules. First create rules at Action level and based on Action level, Persmission level rules are generated"
regards,
Surpreet -
Body of email is being duplicated when I send attachments and copy someone
When I send emails with attachments, the outgoing message goes out as one email, however, what I type is duplicated. This only happens if I copy someone else in that email (like myself). If I send a message with an attachment and I copy myself, I notice that when I open that mail in a different email application (Eudora for example), the message I sent is duplicated. For example, If I write a message that has "Dear Tom, thank you for writing. Attached is your invoice." and I send that mail to Tom and copy myself, and I open that mail in Eudora, I see that message as one incoming piece of mail, but it has the message to Tom listed twice in that same email. It will only have the attachment listed once, however my message to Tom is listed twice. I am not getting two emails, I am getting one email, but the message looks like I typed the same sentence twice. Now, if I do the same thing, but I don't have an attachment, I do not see the message twice.
Hello, that's a strange one, in Mail>Preferences>Composing>Responding... what all is checked there?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ does not exist. -
I have Encore CS3. I had two menus called "Romaji Songset Menu 1" and "Romaji Songset Menu 2" (I'll shorten that to "RSM" here), and I duplicated them and renamed the copies "Japanese Songset Menu 1" and "Japanese Songset Menu 2" (hereafter "JSM"). Since then, I have been having some funny problems with at least one of those copied menus (like text reflecting the button name even when that checkbox is not checked, or all my navigation suddenly going to zero on a whole menu without warning, etc.). Just now I happened to look in the Menus directory at the actual files, and noticed that the filenames did not change when I renamed "Romaji" to "Japanese". The filenames are currently called "RSM 1", "RSM 2", "RSM 1 2" and "RSM 2 3". And there are other files in the same directory that are older, and they seem to correspond to times when I duplicated menus and then deleted them later - apparently the actual files are not removed from the directory. Those older files also apparently had the same problem of not being renamed when renamed in Encore - they have names like "RSM 2 2" (from a previous duplication of "RSM 2") and "RIM 2", "RIM 2 2", and "RIM 2 2 2" (I don't remember duplicating my real "RIM" menu that many times, but I suppose it's possible). There is even a "Top Menu 2", and I don't remember duplicating the top menu at all.
I don't think I had this problem before - I have a project from last fall that also involved duplicating menus, and all the menu files are named the way they should be.
The question is, is this harmless, or could it be related to the other strange problems and should be remedied? If I rename the physical files, Encore will probably orphan any related links, zero out those menus' button navigation, etc. - who knows what havoc that would wreak. I am in final testing of the project before sending it off to be made into a DLT for the replicator, and things were looking pretty good until I tried to use one of my menus today and discovered that all the navigation was gone. I fixed that, but if I don't know why it happened, and if it happens again when the DLT provider opens the Encore project, yikes!
And should I delete the files with old dates, or could there be some sort of umbilical cord between them and the currently used ones?
CORRECTION: I just discovered that the navigation-becoming-all-zeros problem was on not just one but both JSM menus, so there is definitely a disease that duplicated menus have that originals don't, in my case.@John: I hear you, and from now on I'll use simpler filenames (no spaces and shorter). But I had the exact same menu file naming convention in a previous project last year, and neither then nor now have I had any of the blatant problems cited in the threads you referenced - I have not gotten any errors whatsoever in this project (knock on wood), and the test DVD's play fine. By the way, Encore itself is an offender of the "no spaces rule" - notice that the additional numbers it adds have a space in front of them! I guess if we want to avoid spaces in filenames, we cannot ever use Encore to duplicate menus...
Followup question: If I decide to rename my files to play it safe, how much additional work will I make for myself, and what landmines might there be? I'll have to re-import all the menus, relink all the buttons to and from each menu, and recreate all the navigation, right? Anything else? I have seven menus and a zillion buttons, and I was hoping this project was at its final stage (I actually thought I would have been sending it out yesterday, but my husband found some things to be improved in the videos, and we also noticed that the default button on the menus was not what it should be). And my asset filenames might give you even more heebee-jeebees (I've never spelled that before - it's just something my mom used to say), as they mostly consist of multibyte characters - but although that might bother you, it is perfectly normal for all Japanese users of PPro and Encore. I am not going to rename all of them!
@Stan:
The not renaming the file name is exactly what EN does: simply renaming
the menu in the properties panel does nothing other than to change the
name in EN. ... To the extent that it matters, if I really want a filename difference, I
save the menu (as file or template), then import as menu.
Hmm, I guess when I did the same structure of project last year, I must have copied the menu files and imported, rather than duplicating within Encore. Perhaps I was smarter last year... LOL
EN is not designed for us to go messing around in those directories (even though we do/must).
That's exactly what I'm afraid of with John's suggestion that I rename my files. Things are working at the moment. (I feel like if I sneeze something might go wrong, but at the moment it's okay.)
I wonder if your navigation was lost as part of that process?
Nope. The menu was duplicated over a week ago, and the navigation was fine. Since then I have made many changes, and the navigation stayed fine. (I edit in Photoshop, but I never open the files outside Encore, as I'm afraid of the delicate relationship - I always run Encore and select "Edit Menu in Photoshop".) The time when the navigation went away, the only thing I did was to change the default button from 1 to 3 on all four Songset menus, and from 1 to 2 on two other menus. At that time I made no other changes, and did not open the menus in Photoshop at all. After only the default button change, the two previously duplicated menus lost their navigation, but all other menus were okay. That's why I was wondering if there was something special about menus whose filenames have additional numbers that Encore adds when it does duplication. I don't care about asthetics of filenames or extra files in the folder - I just want to know that my project will run when I send it off to be made into a DLT. -
Attribute Assignation in Rules File
Hi!
I am using a Rules File to automatic attributes assignation. The particular thing of this cube, is that the cube acept duplicated members.
The structure of the dimension is as follow:
- CC
-> CC1
----> E1
--------> C1
--------> C2
- Eje [Attribute Dimension]
-> Eje 1
-> Eje 2
The Rules File is as follow:
Level0,CC; Level1,CC; Eje1,CC
C1; E1; Eje1
The result of the execution of the Rules Files is as follow:
- CC
-> CC1
----> E1
--------> C1
--------> C2
-> E1 [Attribute: Eje1]
----> C1
I don't know what is the problem here, because the rules file don't search if the member exists in the structure and only create a new member with the attribute association.
Do you know what is happen here?By attribute we are passing some extra information (like resourceBundle, unique etc) about property/item-descriptor etc.
you can refer below url:
http://docs.oracle.com/cd/E23507_01/Platform.20073/RepositoryGuide/html/s1605samplecompositerepositorydefinit01.html
-RMishra
Maybe you are looking for
-
LabVIEW 8.5 Executable on Windows System 7 64-bit
I have a program that uses the Vision RTE and LabVIEW 8.5. The Program was written and compiled on a PC with Windows XP (32-bit). A customer installed the program onto a PC with System 7 64-bit and is having problems running the program. Is there
-
Production cost for MTO in Sales Pricing
Hi All, For Make-To-Stock items the material standard cost comes from Accounting view of material master as VPRS in Sales Pricing (provided we include that condition type). Now how do I get the production cost for Make-To-Order items in Sales Pricing
-
Merge data creating duplicate listings
I have a csv database with about 580 records. I've created a template with the correct fields in inDesign, loaded the csv file using merge data, then created the merged document. I get 580 listings of one item like the image below. If there is an err
-
Oracle BPEL: Query with IN statement
Hi, I would like to know how does BPEL pass in multiple values in a query statement. For eg, select * from table1 where column1 in ('A','B','C') I've tried creating a variable with 'A','B','C' and pass to the query statement but the DB takes it as a
-
When do I get the refund as the subscription will ...
I had used all my minutes for the current month subscription for Pakistan. The subscription is to renew in September. However mistakenly I paid another amount of 4.99$ in my account for the subscription which I then cancelled immediately without any