Duration for Migration

Hi,
We are trying to Migrate the SAP provided backup file of the Appset in OLS 4.2 to BPC M 7.0. While doing the same the 23rd step which is "Remove all folder Security" is running more than 12 hours and we are not sure that it got hung.
Please confirm howlong the process of migration will take.
Also if u suggest to kill the process, please let us know will it affect the process which is carried out by us till now.
Thanks in Advance,
Regards,
G.Vijaya Kumar

Hi,
If you are migrating SAP provided appset backup, it should not take more than half an hour for the automatic steps to be completed. I am not considering the manual steps.
Since, it has been more than 12 hours, its definitely stuck. You need to end the process. However, before starting the process, you need to open the migration log and delete the entry pertaining to the 23rd step. Otherwise the tool will consider the step completed and will start from 24th step. So, you need to make the necessary changes in the log file. But, please be careful while making the changes.
Hope this helps.

Similar Messages

EMIGALL performance for migration object OBJCLASS

Hi all,
my previous question, was Classification of IFLOT & EQUI via CLB2 / CLB1 & was focused on improving performance of classification of IFLOT & EQUI objects.
Testing EMIGALL for migration object OBJCLASS I am seeing no performance gains between a single thread update & parallel update threads. IE the single thread throughput is reported as ~the same as the parallel threads throughput combined.
I note in the job logs of my various tests;
for a single thread, that no messages are logged between the start & end of the migration.
for parallel threads, that message C4 200 'Class "CLASSNAMEHERE" is locked' appearing many times.
I don't see any unexpected migration errors in ether case.
Are there any insights on how I might improve over all throughput using this method? I cant see any control parameters for this object, nor does the Guideline have much information on OBJCLASS.
First world problems :-/

Hello Daniel,
Without having much insight into your system and infrastructure details or the volume that you are working with, I suggest for you to try below for performance improvement.
1. Run DB Statistics on functional location and Equipment related tables such as EQUI, IFLOT, ILOA, etc. (these are HLO objects that you are updating by way of classification). Also update classification table such as AUSP. These tables mentioned here as a starting point.
2. Also strongly suggest that a performance trace be done on this job to analyze and identify another table or steps that may be a performance bottleneck and maybe a candidate for DB statistics refresh Or some other corrective action.
3. The locks maybe occurring due to a mass update which is as expected. Perhaps to get by that you may want to use "commit buffering allowed" option for this migration object and set to say a number "10" or "20" to start with and see if it helps better the performance. As you would have noticed, locks will also impact performance.
4. Please also refer to Cookbook for ISUMIG Performance and refer to sections for DEVICE, CONNOBJ and DEVLOC. These are HLO objects for classification and there may be some useful insight in that document too.
Hope this helps.
Ash

Best practice for migrating IDOCs?

Subject: Best practice for migrating IDOC's?
Hi,
I need to migrate some IDOC's to another system for 'historical reference'.
However, I don't want to move them using the regular setup as I don't want the inbound processing to be triggered.
The data that was created in the original system by the processed IDOC's will be migrated to the new system using migration workbench. I only need to migrate the IDOC's as-is due to legal requirements.
What is the best way to do this? I can see three solutions:
A) Download IDOC table contents to a local file and upload them in the new system. Quick and dirty approach, but it might also be a bit risky.
B) Use LSMW. However, I'm not sure whether this is feasible for IDOC's.
C) Using ALE and setting up a custom partner profile where inbound processing only writes the IDOC's to the database. Send the IDOC's from legacy to the new system. Using standard functionality in this way seems to me to be the best solution, but I need to make sure that the IDOC's once migration will get the same status as they had in the old system.
Any help/input will be appreciated
Regards
Karl Johan
PS. For anyone interested in the business case: Within EU the utility market was deregulated a few years ago, so that any customer can buy electricity from any supplier. When a customer switches supplier this is handled via EDI, in SAP using ALE and IDOC's. I'm working on a merger between two utility companies and for legal reasons we need to move the IDOC's. Any other data is migrated using migration workbench for IS-U.

Hi Daniele
I am not entirely sure, what you are asking, Please could you provide additional information.
Are you looking for best practice recommendations for Governance, for example: Change transports between DEV, QA and PRD in BPC 7.0?
What is the best method? Server Manager backup and restore, etc ?
And
Best Practice recommendations on how to upgrade to a different version of BPC, for example: Upgrading from BPC 7.0 to 7.5 or 10.0 ?
Kind Regards
Daniel

Best Practice for Migration of BO from one server to another

Hi All,
I would like to know what is the Best pratice for Migration of BO from One server to another.
i have Installed BO Xi R2 on my server.
Thanks,
Anendu Bothra
Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
Choose Copy, then click OK.
Choose the version information for the source CMS database.
Select the database type for the source CMS database, and then specify
its database information (including host name, user name, and password).
Select the database type for the destination CMS database, and then
specify its database information (including host name, user name, and
password).
When the CMS database has finished copying, click OK.
Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
I'd advise taking full backups beforehand.

How to setup the access duration for user

Dear experts,
As requrement of users, we need to setup the access duration for all users of our company . It's mean users only access into SAP on defined duration
Ex : Working time is 8h00 am to 17h00 pm, after 17h00 pm, users cannot access into system
Please help.
Thanks,
Neo

Hi all,
Thanks for your solution
We want to set the access duration for end-user but sometimes, we need to flexible to allow user access to system in some special case.
Let me detail users's requirements
- Users can access to SAP fom 8h00 to 16h00
- At 16h00, system will send the warning message to user to inform that system will aunomatic turn offf after 15 minutes, it's mean system will automatic kick out users after 15 minutes
- From 16h00 to 8h00, users can not access to SAP
- However, in some special case, we can grant the acess to system to specific user.
Can we setup these steps on SAP ?
Thanks,
Neo

How do I know what are custome code deployed on my site for Migration from 2010 to 2013

We have around 500 sites and several Webapplication. Now we want to migrate site from SharePoint 2010 to 2013
We will use Metalogix tool for Migration. However we want to know which custom changes site Have , SO those WSP we can deployed on 2013, So that Site will work fine After Migration.
SO question is there is any way where I can find what customization site have ?
I want poweshell which will tell me these WSP have deployed on this Sitecollection , SO that only those I will deploy on 2013 ? ALso
Suppose I have created Workflows through designer , is there any powershell which will tell me these workflow have deployed on particular site, so that I can check is those Migrated successfully or not.
Please mark answer , if you think answer is helpful or correct.

Hi,
Please see the link below that will give you detailed steps to identify customizations
Checklist for upgrade
Cheers
FrenchSpeaker - MCTS

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

When we have LSMW for migrating data then why we will go for Session/Call ?

Hi Guru's,
Could you please tell me ...
When we have LSMW for migrating data , why will go for Sessions/call Transaction for migrating? when we do with LSMW we can complete the object with less time then why we have will do with session/call transaction?
when we have to use LSMW ? and when we have to use SESSION/ CALL TRANSACTION ..
thanks in advance..
vardhan

LSMW can't upload large amount of data into the database.
Whereas BDC SESSION CALL /TRANSACTION method can upload large amount of data into the database.
The error capture method is superior in BDC.
BDC programs can be scheduled to run on periodic basis as per the customer requirements.

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Problems setting duration for still photos and transitions in iMovie '11

I downloaded iMovie 11 from the Apps Store last night and am trying to make my first movie with it today. I use still photos exclusively.
For most - but not all - I like 5 seconds for photos and for transitions 2 seconds. I do vary this on occasion and so do not check "for all photos' or "for all transitions".
I can't get these settings to work with this version of iMovie. For example, I added a photo (5 sec) then a transition (2 sec) which changed the duration time of the photo - as it should. But when I double clicked the photo, to bring up the inspector window to change the duration of the photo, nothing happened. Then I added another photo. The duration of the first photo increased to 7 seconds and nothing I do seemed to change that.
The time increases seem random: for example, sometimes the time on the still photo increases to 6:29 sec, sometimes to 7 sec.
The duration for the transitions always remains the same - 2 sec; it's the time for the photos that jumps around. And I haven't been able to find a way to get back to 5 sec.
Before posting this, I researched and found an number of earlier posts detailing the same issues.
However, none of these posts had stars to indicate the problem was solved.
Has anyone found a solution or is this a bug that should be reported to Apple?

Interesting!!
I've spent a lot of hours on this too, but I have come up with a different solution perhaps because I like to vary both the image duration and the transition duration in my movies.
Here's my process:
-> Knowing that (a) I want most of the photos to be visible for 5 seconds and most transitions for 2 seconds and (b) that a transition takes half from the photo before and half from the photo after, under File>Project Properties>Photo Duration I chose 7 seconds - each photo will 'lose' a total of 2 seconds from the transitions in front and behind. I did not check either "Applies to all transitions." or "Applies to all photos." - See below for why.
-> I discovered, as you have, that all the photos have to go in before I add any transitions. This was new to me. With all previous versions of iMovie I simply added a photo then a transition then another photo one at a time. I had to fiddle with the timing adjustments, but at least I could fiddle. With this new version of iMovie I can't. Once the transition is in place, I cannot change the duration of the photo.
-> Sometimes, I want a longer or shorter duration for a photo. For example, on photos to which I apply the Ken Burns effect, I often want the image on the screen for a slightly longer time. In this case, I have to use the inspector to change the duration before I add the transitions. So I might set the time for 8 seconds; when both transitions are added, the time for this photo becomes 6 seconds, which is what I want.
-> The same applies if I want a transition to be shorter or longer than 2 seconds. If, for example, I want the duration for a transition to be 1 second, then I have to change the duration on the two linked photos to 5 1/2 seconds.
All of this requires much more prior planning than I am used to with iMovie. Right now, I working with batches of 5 or 6 photos at a time. I don't put a transition on the last photo in the batch until I have added the next group of photos. And things get really tricky if I don't like my original design. If I want to change anything, I have to take out all of the transitions linking the photos I want to work on, do the math, make the changes in the photo durations, then put the transitions back.
Perhaps I am trying to make iMovie do more than it was intended to do, I don't know. Perhaps this problem stems from the fact that I bought just iMovie 11 from the Mac Apps Store and not the entire iLife 11. Don't know that either. But at least I have found a way to make the movie look the way I want it to look.
Thanks for sharing your process. I will use it when the circumstances are right.

Support document for Migration of application fro flex 2 o flex 3

Support document for Migration of application fro flex 2 to
flex 3

I'm sorry to hear that you are having problems. A few APIs
did change from B3 to final, but you should be getting compile
errors for those. I can assure you that all of the areas you
mentioned were tested and are working for many folks so if you can
supply examples of what isnt working we can try to get you back up
and running.

Ideas for migrating data to new iMac from faulty eMac?

My wife's old eMac died, but she was able to copy her user folder (all 58+ GBs) to an external drive prior to it finally giving up the ghost. It was copied via finder (not cloned or done via Time Machine), so it doesn't appear to have permissions set (i.e., I can mount the disk on another computer and access all her files).
She needed her new iMac set up right away to finish some work, so only a few files have been transfered.
I don't know if Migration Assistant can deal with the files, but I'd rather not migrate her stuff at this point. Migration Assistant isn't particularly granular (i.e., you can't choose which apps or which email to transfer - it's all or nothing). I'd rather access her home folder (as the user) to clean out her files (i.e., email, downloads, iTunes, iPhoto, etc.) prior to migrating them to her new computer. At a minimum, I want to log into her old account to backup her contacts to transfer over (or access them some other way).
Can I set up a user account for her on another computer (same name and pw), go into the advanced accounts settings and point to her folder on the external drive, and then log into her account? Or do I need to do some terminal work?
I believe the HDD was corrupted by the HW failure, but if Target Disk Mode is preferable for what I want to do, then it might be worth some troubleshooting on the eMac to get Target Disk working.

"Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist"
excepted from, "kimaccdual: A Basic Guide for Migrating to Intel-Macs" by Kappy and others.

Firewire 800 vs 400 for Migration Assistant

I'm trying to use Migration Assistant to move stuff from my old iMac, which has Firewire 400 ports to my new iMac which has Firewire 800. I bought a cable that has one plug type on each end, but it seems the two iMacs can't 'see each other' using this cable. Also, if I connect my external LaCie hard drive (which has both)to my new iMac using this cable, it doesn't mount, although it will using a USB2 cable. This isn't an option for Migration Assistant. Any ideas?

Well, either the cable is bad or your firewire port is bad. Firewire 800 is backward compatible to 400. Try on someone elses mac. If it works on theirs, then your port is suspect.
Glor

Need the steps,Impacts for migrating DRM from version 9.3.2.0.0 to 9.3.3.0

Hi All,
Any body can guide me or provide me the steps for migrating Hyperion DRM from version 9.3.2.0.0 to 9.3.3.0.0. Also i need the Impacts on the current setup or data.
Also let us know any change in table structure between these two versions.
Please help me on this issue on priority
regards,
Sathiya

Hi Sathiya,
Please go through the maintenance release doc for 9.3.3.X, this has steps to help you upgrade if the DRM schemas are already existing from 9.3.2.X
Hope this helps you out.
http://docs.oracle.com/cd/E10530_01/doc/epm.931/drm_93300_readme.pdf
All the best :)
Denzil (Denzz)

HT204350 The instructions for "Migrating using FireWire or ThunderBolt" are WRONG

The instructions for "Migrating using FireWire or ThunderBolt" in this article are wrong for a transfer from a Mountain Lion Mac to a Mavericks Mac. You should not put the source Mac in target disk mode. Rather, you should start up Migration Assistant on the source Mac and choose "To another Mac"

Apple doesn’t routinely monitor the discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Duration for Migration

Similar Messages

Maybe you are looking for