During boot..contains a file system with errors ??

Lately when I boot up my system, I receive the error dev/sda3 contains a file syetem with errors, force check. I have to hit CTRL+D to continue. Then it reboots, goes past sda3 to give the same error for sda4 which it checks...then I hit CTRL+D it reboots and usually continues to a working system.
It has happenned many times in the past few weeks, however once boot up the system is fine. Sda3 is my / partition and sda4 is home. Should I check a log for more info, or should I manually run some checks?
This makes my Arch system's boot up time seem to take as long as Ubuntu .
Thanks

glenn69 wrote:Thanks for the response, but that will simply perform the disk checks without the need for a reboot in between.
Not quite - the disk checks during boot don't actually fix filesystem errors. That's your job when you're dropped into the shell. You may run fsck /dev/<your hd> (or fsck -y for non-interactive mode) to repair the filesystem.
glenn69 wrote:That does help, but I'm a bit more interested in the WHY it is happening. How do I find that out to determine a long term solution?
Could be any number of reasons; I find an unclean shutdown is the most common cause for me. But if this happens consistently after you manually repair the filesystems, there may be something wrong with your actual hard drive.
Also, if you're not using a journaling filesystem (ex. ext3/4), try using one.

Similar Messages

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
   Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
   c:
   cd boot
   attrib bcd -s -h -r
   ren c:\boot\bcd bcd.old
   bootrec /RebuildBcd
-Jerry

File system task error ; Access to the path " " is denied

HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamen

How to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

Hi Guys,
Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi HUS110 direct attached (via FC))
I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
Any steps i missed?Appreciate anyone's input
Regards,
Robert

Hi Robert,
did you actually add the OVS to the server pool, that you created?

Encoding failed in "file name" with error: -43

Hi!
I've tried everything but still, after about 20 hours of encoding DVD Studio Pro just stoppes, saying "encoding failed in "file name" with error: -43". The movie is in DV PAL format and made in Final Cut Pro version 5. I'm using DVD Studio Pro 4.0. The movie is about 1 hour and 30 minutes long and I'm trying to put it on a double layer DVD. I've tried to shorten it (it was nearly 2 hours before), but that didn't help. I also tried to shorten it even more and put it on a single layer DVD, but still the same message.
So if somebody has any idea of how I can solve this problem, please let me know as soon as possible!
Thank you!

Error -43 means "File not found." If you are compressing from a reference movie, make sure that all referenced movie clips are present on the disk and that permission settings are not preventing DVD Studio Pro from accessing them.
Error -1309 means "Out of bounds." This means that the source file is pretending to be bigger than it actually is.
So it sounds like there are issues with your source movie.
P.S. Compressor has a much better MPEG-2 encoder and I would recommend using that instead.

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

Spanned file system with zip

Hi
Is there a way of creating a spanned file system with any of the current zip utilities (Native LabView or OpenG etc.)?
Effectively the result should be z01, z02, etc. This format is something that both WinRAR and WinZIP accomplish, so the output would have to be compatible.
The main issue is when compressing a whole directory. Files are rearranged in such a way that the output of all z01, z02 etc. is of the same size (users choice), and I don't quite know how the files are re-arranged in order to achieve that.
Thanks

OpenG ZIP does not support spanning or stripped datafiles. The
zerotolerance wrote:
First, thanks for your reply.
I actually have a zip utility that compresses strings rather than files. I believe that this utility can be used to create this spanning, but the trouble is it only gives the actual compressed body and not the required headers.
I don't know much about how the headers and how to create them (i.e. the crc32, relative path etc.) in a zip file.
Most likely you just have the deflate algorrtihme in that "ZIP" utility. It is the compression algorithme normally used in ZIP but has nothing to do with ZIP itself. ZLIB is the most commonly used Open Source library for the deflate() algorithme and is also used in the OpenG ZIP library to implement the ZIP functionality. The function ZLIB Deflate.vi in OpenG ZIP exposes this functionality directly and does mthe same.
zerotolerance wrote:
First, thanks for your reply.
But more importantly, how are the files within a directory arranged so that constant zip files (i.e. z01, z02 etc.) come out.
What I mean by this is the convept that WinRAR uses. So, if you have a directory with mixed file sizes in them, and you choose to have split size of 10MB, the output of each compressed file (i.e. z01, z02 etc.) is always 10MB, appart from the last one of course.
Some help in the headers and the rearrangement of files within a nested direcotry would go a long way.
As for the cmd line, I don't like using that feature with labview because its very heavily limited. It does not give any intermitante control when a job is started. Just to see a simple progress as exe runs we have to jump through hoops, i.e. writting the output to file or clipborad and then reading etc. let alone anything else. and I'm also looking to add alot of other small features along the way, i.e. pausing, cancel, resume progress save, etc. So I definatly cannot take this route.
So ZIP uses deflate() to compress the individucal file streams but the ZIP format is about creating management around it that allows to store multiple such streams into one physical file. It is a little like a filesystem inside a file.
Adding Spanning and striping to OpenG ZIP would be possible and most of it could be done in the LabVIEW part of it, but there would also need to be some modifications to the underlaying shared library to support that. The spanning or striping is done in such a way that filestreams are cut up when necessary and continued in the next data file. The unzipping algorithme has then to be smart enough to recognize that and combine the streams again when uncompressing. For that the compression changes various flags in the header for each stream, which is the part where the shared library would need to be modified to allow those changed values to be writting (and also recognized on decompression). All in all quite a serious project undertaking.
Refusing to use command line tools because they are ugly is not really a smart decision.
Under Unix/Linux it is totally normal to do so and it makes the whole unix system very powerful as you don't need to write huge monotlithic monsters that do everything from making coffee, to cleaning the house and making the laundry but simply make a tool for each task and tie them together through command line chaining. Divide and master is the magic here, not not conquer and swallow!
Also you have here the choice to use a command line tool and be done in 5 minutes, or write a tool like OpenG ZIP that took me probably several man months of work over time. Or wait until me or someone else changes OpenG to support this feature which could be 10 years.
Alternatively you can also try to write a LabVIEW library to use the ZIPArchive shared library from http://www.artpol-software.com/ziparchive/KB/0610051553.aspx. But that is likely going to be a similar effort as writing OpenG ZIP was.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Display File System With JTree

Greeting,
Are there any suggestions or example which is about displaying file system with JTree??
Thx Advanced

Just create tree model from your filesystem.
If you like to have fancier look, you may also
create renderer which would show
appropriate icons.
Look to classes
DefaultMutableTreeNode
DefaultTreeModel
( all in the javax.swing.tree )

SUN VM Shared File Systems make Errors with lucreate

Hi,
I have a problem with an attached A5200 with mirrored disks (Solaris 9, Volume Manager). Whereas the "critical" partitions should be copied to a second system disk, the mirrored partitions should be shared.
Here is a script with lucreate.
/usr/sbin/lucreate \
-l ${Logdir}/$0.log \
-o ${Logdir}/$0.error \
-m /:/dev/dsk/c2t0d0s0:ufs \
-m /var:/dev/dsk/c2t0d0s3:ufs \
-m /opt:/dev/dsk/c2t0d0s4:ufs \
-m -:/dev/dsk/c2t0d0s1:swap \
-n disk0
And here is the output
root@ahbgbld800x:/usr/local/LUscripts >./lucreate_disk0.sh
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
INFORMATION: Unable to determine size or capacity of slice </dev/md/RAID-INT/dsk/d0>.
ERROR: An error occurred during creation of configuration file.
ERROR: Cannot create the internal configuration file for the current boot environment <disk3>.
Assertion failed: *ptrKey == (unsigned long long)_lu_malloc, file lu_mem.c, line 362<br />
Abort - core dumped

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

Error when trying to create a Files System with newfs

HI,
I am running Solaris 8 on a Sun Ultra 10 workstation
I am in the process of configuring the slices on my primary 20 gig hard drive. I have partitioned the hard drive as follows.
# prtvtoc /dev/dsk/c0t0d0s2
* /dev/dsk/c0t0d0s2 (volume "edi_main") partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 16 tracks/cylinder
* 1008 sectors/cylinder
* 39535 cylinders
* 39533 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 27265392 12583872 39849263 /
1 2 00 0 1049328 1049327
2 5 00 0 39849264 39849263
3 2 00 1049328 26216064 27265391 /edi
The root filesystem was created at installation, and I executed newfs on partition 3 to create the /edi filesystem, and both of them are mounted. I now need to create a filesystem on slice 1 but the newfs command is not working. I get the following output from newfs:
# newfs -v /dev/dsk/c0t0d0s1
newfs: /dev/dsk/c0t0d0s1: Unable to read Disk geometry
Could someone tell me what is wrong with this partition.
Any help would be appreciated.

I e-mailed tech support and got my answer.
I should have been using /dev/rdsk and not /dev/dsk when specifying the disk slice to put the file system on.

HFS File system with case sensitive is not accepted to install creative cloud? Is there any other way but install the whole MacOS again after formatting the drive. I cannot belief that Adobe is so bad to it's Mac customers..

After many hours setting up OS10.10 from he scratch the last step should be installing m Adobe apps again.
trying this I always get the error message that creative cloud does not accept case sensitive file systems and I shall use another drive.
This means I have to set up the whole machine again after formatting without case sensitive but then having copy problems with my NAS?
I cannot belief that Adobe is really demanding this. If so this would show how urgent this market need alternatives and some more competition...

Hi,
You can refer below link for more information.
Error "Case-sensitive drives not supported" or similar install error | Mac OS

Hierarchy from flat file loading with errors - duplicate node names

Hello experts,
I am loading a product hierarchy from a flat file into a custom hierarchy
object. The issue is that it errors out saying I am loading
duplicates within nodes, however all node IDs within a level are unique.
It seems to be looking at the node name to determine uniqueness and I know
we have some duplication within the text there especially when you factor
in the 32 character limitation for the node name. Does anyone have an idea
as to whether it is possible to have it only consider the node ID instead
of the node name to determine uniqueness?
A colleague suggested using the link ID to fix this problem but I don't know how that field works or how to populate it.
I'm working in a BI 7.0 environment (I don't know if that makes a difference since you still have to use the 3.x objects to extract the hierarchy).
Any help would be appreciated.
Nancy

Hi Nancy,
You may wish to check this OSS Note 1026749 - Hierarchies: Consistency check for duplicate nodes and 912115 (old one)
Symptom -
When you load or activate a hierarchy it terminates with error message RH 109 or RH 211. The hierarchy contains duplicate nodes and this is not allowed. The long texts of messages RH 109 or RH 211 do not describe the reason for the problem sufficiently or they are partially incorrect.
There is uncertainty about in which cases duplicate nodes exist in a hierarchy and in which cases duplicate nodes are allowed.
Hope this helps,
Bye...
Naga Timmaraju

File System repository error in component monitor

Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
Sushanth

Hi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard

During boot..contains a file system with errors ??

Similar Messages

Maybe you are looking for