File System repository error in component monitor
Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
Sushanth
Hi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard
Similar Messages
-
File System Repository Error!!
Hello
i have created a File System Repository i.e.
Content Management --> Reposiroty Managers --> File System Repository
and given the
Prefix /ShareFile
Lookup mode caseless
Root Directory as d:/km
now when i check in the component monitoring it showing me error
component monitoring --> repository managers --> ShareFile
it gives error
<b>Startup Error: The localroot does not exist: /oracle/j2ee/cluster/server0/D:\KM </b>
how do i rectify this error
useful answers will be rewarded
Regards
JMHello
i will just explain you the scenario i m working on
i want to configure the File System Repository
i go in the configuration path of File System Repository
there i give
Name ShareFile
Prefix /ShareFile
Root Directory D:\KM (which is a local file on my HDD)
i have created Network Path also
Name: NetworkPath
Network Path : D:\
and then when i go in the
System Administration → Monitoring → Knowledge Management → Component Monitor
it shows red light against the ShareFile
i feel this information will help to give me solution for my problem
useful answers will be rewarded
Regards
JM -
Hello All-
I'm having a puzzling time trying to set up a file repository. My portal (EP6, SP14) is sitting on Unix box. I am attempting to connect to a NAS as a windows share. I've added the windowsKM system in system landscape and I've added the corresponding KM landscape. I then added an network path pointed to
<IP>\Share, set jCIFS and used Domain/User as my password. I've then set up my repository, making sure the localroot matches the network path. To minimize variables, I'm just using ACLManager, not Windows ACL, to keep things simple.
I believe I've followed all the steps as specified in the manual. But no luck. I keep getting the following types of errors. Either "Startup Error: The localroot does not exist: /usr/sap/EPD/JC02/j2ee/cluster/server0/
15.233.66.264\portshare" or "getting mapped math - java.io.IOException: Canonical path not available for portshare." (I'm getting that when I use the UNC).
Does anyone recognize these errors and can point me to where I'm going wrong? I've dug through the logs and message board and I can't find anything obvious.
Plenty of points awarded for any and all helpful answers!
Thanks-
Jim OrbinHi James,
Would like to clarify few points..
a. Does your share "
15.233.66.264\portshare" refer a different unix machine or the same machine ?
Same Machine: If this is the case, you need not provide the "IP Address" and other stuff. You can directly provide the actual path eg: /usr/docs
Different Machine: Pointing the repository to other unix systems gives some problems. Does your Unix box have GUI mode. If so, a way to solve this..
You will have a NFS (Network File Share) tool available. Use this tool and create a Network file share.
Steps:
1. Launch the NFS Server link from NFS tool and create a share in the Machine which hosts the docs. This machine is to act as the "NFS Server"
2. Now go the Portal server.
3. Here, launch the NFS Client link from the NFS tool and create a link to the share in the source machine which hosts the docs.
4. Now, all the source docs from the host machine will be available in your portal server as a network share folder .
ie.Documents under //machine 2/docs will be available in portal server under /usr/docs as a link.
5. Now give the local path ie. /usr/docs in your repository config.
The File System Repository will now work fine with no trouble in locating the folder in the same machine.
Hope this helps. Pls get back if you still face issues.
Regards,
Venkat.
[Reward points for useful answers] -
Crawler Error when indexing file system repository
Hi all:
I am configuring an index of File system repository.
The version of my ep is EP 7.0 sp12, installed on HP-UX
My Trex is 7.0,installed on Win 2003
Some of the properties of my repository is:
Services: properties,rating
Property serch Manager: SimplePropertySearchManager
Security Manager: AclSecurityManager
The states of repository is green.
When I create an index, the index can't index any of the files. Please help me to see the problem. Thank you!
Exception is like:
class com.sapportals.wcm.repository.InvalidNameException
Logon failure: account currently disabled.
com.sapportals.wcm.repository.InvalidNameException: Logon failure: account currently disabled.
at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:399)
at java.lang.Throwable.(Throwable.java:195)
at java.lang.Exception.(Exception.java:41)
at com.sapportals.wcm.WcmException.(WcmException.java:59)
at com.sapportals.wcm.util.content.ContentException.(ContentException.java:38)
at com.sapportals.wcm.repository.ResourceException.(ResourceException.java:238)
at com.sapportals.wcm.repository.InvalidNameException.(InvalidNameException.java:33)
at com.sapportals.wcm.repository.util.file.FileUtils.checkFilePathTolerating(FileUtils.java:140)
at com.sapportals.wcm.repository.util.file.FileUtils.checkFilePath(FileUtils.java:103)
at com.sapportals.wcm.repository.manager.sfs.FSFile.(FSFile.java:89)
at com.sapportals.wcm.repository.manager.sfs.FSFile.createInstance(FSFile.java:81)
at com.sapportals.wcm.repository.manager.sfs.FSRepositoryManager.getResource(FSRepositoryManager.java:223)
at com.sapportals.wcm.repository.RMAdapter.getResource(RMAdapter.java:227)
at com.sapportals.wcm.repository.runtime.CmAdapter.findResource(CmAdapter.java:1349)
at com.sapportals.wcm.repository.runtime.CmAdapter.findManagerAndResource(CmAdapter.java:1322)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResourceImpl(CmAdapter.java:979)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:192)
at com.sapportals.wcm.control.base.WcmResourceControl.createResource(WcmResourceControl.java:118)
at com.sapportals.wcm.control.base.WcmResourceControl.getSafeResource(WcmResourceControl.java:68)
at com.sapportals.wcm.control.navigation.ResourceDetailsHeaderControl.render(ResourceDetailsHeaderControl.java:160)
at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
at com.sapportals.wcm.control.layout.HorizontalGroupLayout.renderPanes(HorizontalGroupLayout.java:49)
at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
at com.sapportals.wdf.WdfCompositeController.doInitialization(WdfCompositeController.java:282)
at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:660)
at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.htmlb.Container.preRender(Container.java:120)
at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:406)
at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:237)
at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:130)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:77)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.wcm.portal.connection.KmConnection.handleRequest(KmConnection.java:52)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Hi Lou,
Please go though the following thread and check your configurations according to that. I think it will help you.
https://www.sdn.sap.com/irj/sdn/thread?threadID=403393&messageID=3429730#3429730
regards,
Chamkaur -
Error in configuring Windows File System Repository
Hi All,
While trying to configure Windows File system repository we are getting the following error
1. Getting this error when we give
<ip address>\<shared folder name>
Startup Error: The localroot does not exist:
10.1.100.44\Shared_folder
2. Getting this error when we give
<ip address>
Startup Error: host is unkown in file path '
10.1.100.44' - invalid network path:
10.1.100.44
Could any one help in solving this issue.
Regards,
SravanthiHi Chiluveru Sravanthi
According to the documentation, there is a difference between the path syntax for the repository manager and the network path. Did you pay attention to this difference when doing your configurations?
Network paths (Network Path)
Specifies the path to the Windows remote server.
The path consists of the IP address of the Windows remote server, and a path specification.
For example,
192.168.0.1share
Alternatively, you can enter the UNC name and path of the server, for example,
servershare.
SAP recommends that you specify the IP address, since you can then check the availability of the server more easily, using the ping command.
Note: It is not sufficient to enter the server name alone. Specifications in the form of c$ cannot be resolved either.
http://help.sap.com/saphelp_nw70/helpdata/EN/63/7f283ac3d7c54b94964931fa1b4ed9/frameset.htm
File System Repository Manager (Root Directory)
This denotes the path to the root directory in the file system to which the repository manager is assigned.
If you want to integrate documents from a Windows system, this can be a drive letter (followed by a colon) or directory path on the local server or a remote server share (for example, //myserver/myshare/somedir).
If you are running your portal on UNIX and want to access the file system on another UNIX host, you must mount the required directory on the portal server.
Example path when using a UNIX system:
/usr/company/share
The repository manager is responsible for the specified directory and all its subdirectories.
Note that multiple repository manager configurations are not allowed to have the same subpath in their Localroot parameter.
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Best regards,
Martin Søgaard -
File System Repository problem
Hello guys,
I'm on:
J2EE Engine 6.40 PatchLevel 98256.313
Portal 6.0.14.0.0
KnowledgeManagementCollaboration 6.0.14.4.0 (NW04 SPS14 Patch 4)
running on a Windows machine.
I'm trying to set up a File System Repository to connect to a remote share on another Windows machine. I followed the documentation and also some hints here from SDN and still can't connect to the share.
In component monitor it says:
Startup Error: The localroot does not exist:
10.80.1.55\Test_portal
In a trace log I'm getting this:
#1.5#000BCD3F823F00260000000800000AB000040D879131A728#1140775814806#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#59####3a9c7e20a51d11da928e000bcd3f823f#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Error mounting drive ,path
10.80.1.55
Test_portal#
#1.5#000BCD3F823F00260000000900000AB000040D879131ABAB#1140775814806#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#59####3a9c7e20a51d11da928e000bcd3f823f#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration (New path) failed to mount network path
pr1141
Test_portal - com.sapportals.wcm.service.fsmount.RemoteAccessException: Network component not started:
10.80.1.55
Test_portal
at com.sapportals.wcm.service.fsmount.FSMountService.mountDrive(FSMountService.java:90)
at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:349)
at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:287)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:297)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:147)
at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1288)
at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1237)
at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:256)
at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:210)
at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:98)
at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:299)
at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:248)
at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:105)
I had an idea that it could be because of the Serverlet Engine User, which is set up due to documentation, but is only a local user not a domain user. I don't know to which extent this user is important for FS Mount Service. I thought, that for connecting to a remote share, there is only important the user and password set up in Network Path settings in CM.
Changing the user on which is EP running is quite a difficult step due to our security policies and so on. So I would rather not experiment with this until I try all the other possibilities.
Could you, please, give me some advice?Hi Jiri,
have you used double forward slashes in your network path? Please try: //10.80.1.55/Test_portal
You can also test from the portal machine that you can mount the drive via command shell:
"net use t:
10.80.1.55\Test_portal /user:DOMAIN\USER"
(make sure you specify the user with domain)
Hope this helps,
Robert -
Unable to create File System Repository manager
Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
RoyHello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak -
Unable to create File System Repository using Network Path
Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
SanthoshHi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh -
Hi all,
I want to create the file system repository for my system .
Here is what i have done.
Created a directory on my local machine and shared it giving the folder full access.
Created a system in CM and system configuration (KM windows system) and I have done user Mapping
Created Network path and I have given my user name and pwd in that.
While creating the file system repository I have given Windows Landscape System as what I have given in CM and Security Manager as W2ksecurity Manager.
But it shows the following error in component Monitoring.
Startup error: The local root does not exist:
172.25.12.154\smilies
I have reffered the following link
[Integrating Documents from a Windows System into KM |http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
What is the problem? Whether I have missed anything ?
Thanks & Regards,
Hemalatha JHi Hema,
1. Does the User specified in Network Path have full access to specified folder?
2. Check the Host within URL Generator Service (Content Management -> Global Services -> URL Generator Service)
3. Check your KM-Windows System (User Mapping Type = admin,user?)
4. Did you define an Alias for you KM-Windows System? The Property Windows Landscape System within the FileSystem Repository must point to the Alias name of your KM-Windows System
Best regards,
Denis -
File System repository manager
Hi All,
I am working on configuring a File System Repository Manager. I followed the documentation at
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/content.htm
and
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
I made all the configurations and also restarted the portal still do not see the repository in the KM content under root. We are on Netweaver Portal 7.0 on AIX 5.3/DB6, Shared drive is on Win 2003 OS.
Here are the some details on the configurations I made:
Network Path:
jCIFS Protocol: Active
Description: Documents on Shared Drive
Network path:
<IP Address>\public\temporary
password: ***********
USer: Domain\User
File System Repository:
Description: Documents on Shared Drive
Prefix: /abcdef
Root Directory: //<IP Address>/public/temporary/FileShare
Security Manager:AclSecurityManager
ACL Manager Cache: ca_rsrc_acl
Read Only: Not Active
Please advice - thanks -sm
Edited by: sm on Oct 24, 2008 4:34 PM
Note: EP and Share Drive are on the same domain.Hello sm,
You can monotor your repository manager cofiguration, whther it has been activated or not.
It should show in green symbol if it has been correctly configured and active.
Goto system Admin>monitoring>KM>Component monitor>Repository managers-->Check ur repository.... Green color indicate is working fine...
Red color indicate error...
you can check your configuration for the repository.
Example configuration of a UNIX file system repository manager:
Name = fs_rep_unix
Localroot = /usr/company/share
Prefix = /company-share-unix
Read Only = deactivated
Send Events = activated
Repository Services = properties, rating
ACL Manager Cache = ca_rsrc_acl
Security Manager = AclSecurityManager
You can check your Local root i.e. your Root directory. The format should be correct as given in the example.
Don't foget to appreciate, if helpful!!!
Regards
Manisha -
Problem with File System Repository after release change
Hello,
we have been changing the Portal release from EP 6.0 to SAP NetWeaver Portal 7.0 SP17. The OS of the host is Windows 2003 Server.
If I open the component monitor to watch the repostitories, the state of the file system repositories are red and a error message occurred:
Startup Error: getting mapped math - Logon failure: unknown user name or bad password
I checked the logon credentials....they are ok. Also I checked the access from the Portalhost to the Windows File System....it´s ok too.
In our previous portal release the FSR were ok!!
Is there a difference between the file system repository configuration in portal 6.0 and portal 7.0?
Thanks and regards
TomHello Hussain,
I have checked the username and the password of the user who have full access on the Windows file system, but the same error occurred. In the Network Path we have configured a domain user for the file system access. Here is the configuration of the network path:
Name: Test
Description: Test
Networkpath:
Host\share
Password: ****
Re-enter Password: ****
User: domain\user
Here the configuration of the repository:
Name: Test
Description: Test
Prefix: /Test
Lookup Mode: caseless
Root Directory:
Host\share
Repository Services: Nothing
Property Search Manager: com.sapportals.wcm.repository.manager.generic.search.SimpleManagerSearchManager
Security Manager: AclSecurityManager
ACL Manager Cache: ca_cm_rep_acl
Windows Landscape System: Microsoft_Windows_KM
Read only: unchecked
Could it be that I need a user mapping for the access of the windows file system?
Perhaps the configuration of the Windows Landscape System is wrong?
regards
Tom -
File System Repository - using DFS path
Hi, I want to integrate a windows share through a DFS (distributed file system) path. I only found this thread about DFS support where Marcel Rabe says that they have connected KM to a Microsoft based DFS.
Has anybody else managed to use a windows share through a dfs path?
I've created a network path where I have configured the dfs path with the correct user and password. I've provided the domain for the user like this:
domain\username
Then I've created a File System Repository where I have defined the same dfs path as Root directory. I use AclSecurityManager but I've also tried to change it to "not set".
The Component Monitor shows the following error:
Startup Error: getting mapped math - Access is denied
But I know that the username and password are correct.
Any ideas?Hi Marcel,
that's exactly the problem we are experiencing with the same setup and same error-message.
Did you manage to resolve the problem? I'm gratefull for any hint.
Regards,
Alexander -
Create a file system repository
Hi all,
when I create a file system repository in the following solution:
System Administration → System Configuration→Knowledge Management→Content Management→Repository Managers → File System Repository
There I input the name and the URL which is available on the server.
Then I go to Content Administration → KM Content to check the content of the repository I have created , I can find the folder in the first level directory, but why I can't find the text file I create under the second level .
such as: URL C:/kmtest
on the server C:/kmtest/1
C:/kmtest/1/1.text
(I can see the folder 1, but when I click this fodler on the portal , I can see nothing.)
When I use System Administration → Monitoring → Knowledge
Management → Component Monitor to check the status of the repository , I find it was not in green light .
Then what is the reason ? Thank you if you can help me !Check permissions of that folder give full permissions.
Create a File System Repository
You map a network drive from the Portal server and create the file repository in the Portal.
Procedure
To map a network drive from the portal server
1. Log on to the Windows Server of the Portal.
2. From the Microsoft Windows Start menu, open Windows Explorer.
3. Choose Tools  Map Network Drive.
4. Specify the drive letter for the connection (say V :).
5. In Folder, enter the path of the shared folder, (
kmtest)and choose Finish.
Create the File Repository in the Portal
1. Choose System Administration  System Configuration  Knowledge Management  Content Management  Repository Managers  File System Repository.
2. Choose New.
3. Enter a prefix that describes your folder.
4. Enter the value of the drive letter you mapped previously with a forward slash.(/kmtest)
5. (optional) Select the checkboxes for layout and properties from Repository Services.
6. Choose OK. -
Trex Index error in Component Monitor
Hi Experts,
I have created an index for indexing one of the KM folder . When I check the queue status from TREX monitor screen, it shows Document Status as "Preparation
Failed"
Return Message : 8005
Return Message : Timeout reached
Return Message : 8006
Return Message : Lost Connection to peer
I have also checked Component Monitor in that Repository Managers and Services shows runing status but there is errror symbol with yellow trangle.
Can someone please help me outYes Sir,
There are errors in component monitor and i have expanaded the node ands checked the errors that are as follows,
Component Monitor --> Services --> scheduler --> attachmentscheduler startup failed :
Configuration Error: No CM system assigned to this task
Component Monitor --> Services > reporting> Startup Error: exception in startup: Invalid RID: No repository manager found for prefix: /reporting
Component Monitor --> Repository Managers > reporting> startup failed
Component Monitor --> Repository Managers >taxonomy> Startup Error: taxonomy manager: start failed
We had assigned one server node to Scheduler Tasks.
Still there is same error. -
Problem of Network File System repository
Hi all:
I want to set up a File system repository on a remote server.
The steps are here:
1.Define a Network Path.
2.Set up a File system repository.
Things done when the file system and the portal server are in the same zone of address,like 10.XXX.5.XX and 10.XXX.5.XXX, but when reference to another file system, which IP is 10.XXX.10.XX, the repository can never start up!
The message in Component Monitoring is "The localroot does not exist:
10.XXX.10.XX"
How can I solve this problem?Hi Rani,
1.I think I have done all the steps setting up a File system repository. And when the server and File system are in the same segment of IP address, the repository works.
Security Manager:AclSecurityManager
ACL Manager Cache: not set
Windows Landscape System: not set
2.when use servername as the path, the message on monitoring is still on IP address.
3.I can't see the folder
4. I can open the path from the server on exploer.
Maybe you are looking for
-
I built a website for a customer using HTML only, so it would work on any browser, and it works perfectly on everything except ipad safari. I'm loosing information with most of my text numbers - instead of being black they are displaying a 'ghost' im
-
I need to go back to 3.6 from 4.0 Because: 1. Norton, some Mcaffee, and other needed programs aren't supported yet. 2. Can't downsize 4.0 to fit properly on a half screen, when using a text editor on one half and 4.0 display on the other half. I have
-
Safari won't open on my Macbook (Mavericks v 10.9.2). I get a message that "Safari quit unexpectedly while using the librooksbas.dylib plug-in". Any suggestions? Thanks.
-
Subcontracting with suppliere sends material directly to SC
Hi, We have a plant in Erode ( Tamil Nadu ) which orders a Coil from a Vendor in Bangalore ( Karnataka ) We ask Vendor to directly deliver Coil to our Sub Contractor for an oiling Purpose ( May be located in Karnatka / Maharashtra ) SC vendor complet
-
How to batch convert office files like doc to pdf?
version: acrobat pro 7.08 i want to convert about 500 doc files to pdf and have tried to set printer to "Adobe PDF" printer with using batch "printing all" to convert my doc files, message box always asked me saving directory and tmp file for each do