Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
 Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
 bootrec /RebuildBcd
-Jerry

Similar Messages

Workflow Configuration has completed with error for OWF 2.6.4 on 11g DB

###Problem description###
After installing Oracle DB 11.1.0.6 and configured the dbconsole, for setting up OWF have run the %ORACLE_HOME%\owb\wf\install\wfinstall.bat
The input parameters were configured as to the information from http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html.
Unfortunately the process does not complete successfully and the log file contains the following errors:
================================================================================================
1.
WorkflowCA: SQLPLUS:SYS/ /nolog @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\wfsysgnt.sql OWFMGR <WFCA WF PASSWORD> <WFCA SYS PASSWORD> USERS TEMP
WorkflowCA: ORA-01775: looping chain of synonyms
WorkflowCA: WorkflowCA: SQLException during execution: java.sql.SQLException: ORA-01775: looping chain of synonyms
: grant execute on xmldom to OWFMGR
2.
WorkflowCA: SQLPLUS:OWFMGR/<WFCA WF PASSWORD> @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\afsvcdat.sql
WorkflowCA: java.sql.SQLException: ORA-04063: package body "OWFMGR.WF_EVENTS_PKG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "OWFMGR.WF_EVENTS_PKG"
ORA-06512: at line 3
3.
WorkflowCA: SQLPLUS:OWFMGR/<WFCA WF PASSWORD> @E:\Oracle\product\11.1.0\db_1\owb\wf\sql\wfsvcdat.sql
WorkflowCA: java.sql.SQLException: ORA-04063: package body "OWFMGR.WF_EVENTS_PKG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "OWFMGR.WF_EVENTS_PKG"
ORA-06512: at line 3
4.
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :null for app:WFALSNRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut(): Error: Unable to find the administrator for application WFALSNRSVCApp
WorkflowCA: Created a redirected data source with application WFALSNRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :null for app:WFMLRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut(): Error: Unable to find the administrator for application WFMLRSVCApp
WorkflowCA: Created a redirected data source with application WFMLRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: subprocess.getOut(): Invalid input arguments.
WorkflowCA: Workflow Configuration has completed with error.
WorkflowCA: Terminating...
================================================================================================
The data-sources.xml files for the WFALSNRSVCApp and WFMLRSVCApp from E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\application-deployments are configured as:
<?xml version = '1.0' encoding = 'UTF-8'?>
<data-sources>
<managed-data-source user="OWFMGR" password="OWFMGR" connection-pool-name="jdbc/WorkflowDS_connectionPool" jndi-name="jdbc/WorkflowDS" name="jdbc/WorkflowDS_jdbc/WorkflowDS"/>
<connection-pool name="jdbc/WorkflowDS_connectionPool">
<connection-factory factory-class="oracle.jdbc.driver.OracleDriver" user="OWFMGR" password="OWFMGR" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN)))"/>
</connection-pool>
</data-sources>
(Is it possible to reinstall only the wf part of the 11g database as to attempt a fresh installation, not only to drop the OWFMGR schema as the oc4j wf instance remains unchanged? Have searched in OUI for this option but did not find the setting for removing only the workflow for reinstalling)
Thank you!!!

Hi Srini,
Thank you very much for your help. Have reviewed the mentioned notes, but unfortunately no information was contained concerning the encountered error.
As to try and address the situation, have completely re-installed Oracle DB 11.1.0.6 and still the workflow installation ends in error. I have to mention that it is a completely fresh installation, no modifications were made to the base configuration.
For windows the installation steps reference only running the wfinstall.bat script with the appropriate parameters for installing Oracle Workflow, but unfortunately it appears that the installation documentation is lacking some necessary steps as on a out of the box install the process does not complete successfully. The mentioned notes: 266612.1 and 351873.1 do not contain the information for troubleshooting the encoutnered issue.
The environment: Microsoft Windows Server 2003 R2 64b Operating System with Oracle DB 11.1.0.6
LOG Extract detailing the encountered issue:
WorkflowCA: Deploy WF Applications: Windows 2003
WorkflowCA: OC4J_Deploy Command: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\oc4j.jar -userThreads -config E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\server.xml
WorkflowCA: Workflow component container deployed in OC4J: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\oc4j.jar -userThreads -config E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\server.xml
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :Data source jdbc/WorkflowDS is not available. for app:WFALSNRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Created a redirected data source with application WFALSNRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFALSNRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: Executing :E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWFMGR
WorkflowCA: :Data source jdbc/WorkflowDS is not available. for app:WFMLRSVCApp
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Created a redirected data source with application WFMLRSVCApp : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -application WFMLRSVCApp -installDataSource -url jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=BI221WIN))) -username OWFMGR -password ->pwForOwfMgr -className com.evermind.sql.DriverManagerDataSource -location jdbc/WorkflowDS -xaLocation jdbc/xa/WorkflowDS -ejbLocation jdbc/WorkflowDS -connectionDriver oracle.jdbc.driver.OracleDriver
WorkflowCA: subprocess.getOut(): Invalid input arguments.
WorkflowCA: subprocess.getOut():
WorkflowCA: Created obfusticated password for redirect datasource: E:\Oracle\product\11.1.0\db_1\jdk\bin\java -Djava.security.properties=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\config\jazn.security.props -Doracle.security.jazn.config=E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\OC4J_Workflow_Component_Container\config\jazn.xml -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\jazn.jar -user oc4jadmin -password welcome -adduser jazn.com pwForOwfMgr <WFCA WF PASSWORD>
WorkflowCA: subprocess.getOut():
WorkflowCA: subprocess.getOut():
WorkflowCA: Executed OC4J Admin script to shut down the OC4J instance : E:\Oracle\product\11.1.0\db_1\jdk\bin\java -jar E:\Oracle\product\11.1.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 oc4jadmin welcome -shutdown
WorkflowCA: Mon Mar 22 06:29:25 EDT 2010
WorkflowCA: Workflow Configuration has completed with error.
WorkflowCA: Terminating...
Thank you again for all your time and help!!!

Activation of data fails in ods with error 9

I am running the a process chain and during the process, activation of data in ODS fails with error 9.
any suggestions to correct the issue?

Hi,
open the Process Chain if the load is through PC.
right click on the failed task and click repeat.
in the pop-up window leave the seconds field blank and click continue
you can find the activation has started again.
this muct help resolve your issue.

Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)

Hi
We are using 10.1.3.6, and got the following error for just one of the thousands of transactions last night.
cannot end dataload. Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)
The data seems to have loaded, regardless of the error. Should we be concerned, and does this suggest something is not right somewhere?
Your assistance is appreciated.
Cheers

Hi John
Not using a load rule.
There were two other records which rejected based on absentee members. The error message was different for them, and easily fixed.
But this error doesn't tell us much. I will monitor the next run to see if the problem persists.
Thanks

Data Load Transaction Aborted With Error [1130203]

I can't to load data by using rule file . How can I fixthis problem? it shown error message "Data Load TransactionAborted With Error [1130203]".My Essbase is ver 7.0.0.

Don't have that message. Have you lookedin the Application log to see if there is any more information - this is the best place to start. Is the file that you are trying to load the same format as previous files loaded - has anything changed ? maybe you need to open the load rue, and then open the file to see if teh data lines up with the expected format and setup of the load rule .

Exporting data in Applicationmanager fails with Error 10054

Hi all,when I try to export data via Applicationmanager the Application terminates immediately with an error message "can't read data - Error 10054 - network error" "can't write data - Error 10054 - network error" and sometimes with the errormessage "unable to allocate memory - Error 10054".We have an IBM server 340 with 1 GByte Ram, Harddisk Space for Hyperion about 3 GByte in RAID 1.Essbase 6.1.Does anybody know that problem???Help to solve that issue would be great. ThanxJoerg [email protected]

A couple of tips:1. Try stoping and restarting the application then try to export2. If that doesn't work try stopping and restarting the applicationa and the server and reconnecting then doing th eecport.3. Check to see that you have a good connection to the server. When you run an export you must maintain a connection to the server, if you lose it the ecport stops.4. If all else fails open Application Manager on the server itself and run the export from there.Hope this helps,CB

Solaris Express 2/07 missing icons with error message...

HI,
I installed SE 2/07, when I try to log in remotely (using reflections or VNC) I get the following message, but some icons are missing are replaced for a generic one... weird... any help?
Thanks!
The message reads..
"There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.
The last error message was:
Unable to determine the address of the message bus (try 'man dbus-launch' and 'man-daemon' for help).
GNOME will still try to restart the settings Daemon next time you log in.
Any idea hoe to fix this?

Yep. The problem seems to be that you don't have dbus running.
I did as the man page said and put this in my ~/.vnc/xstartup :
dbus-launch gnome-session
gnome-terminal geometry 80x24+10+10 title="My Desktop" &
And everything works without error again.
Cheers,
James

How to edit data from an IDOC with errors and reprocess it

Hi,
We are working with SAP XI for communicate with an external systems by files (external) to IDOCS (SAP R/3).
Sometimes we need to edit the data from an inbound IDOC, because the external system generates wrong information and that can't be processed directly.
We had seen posts like:
But we wanna to do it with no ABAP editor.
¿Can we change the data from the IDOC in other way (transaction) and reprocess it?
We tried with /WE05, pushing EDIT button, but can't edit the data from the IDOC.
Thanks in advance for your help
Regards,
Federico Martin

Keep Looking at forums i founded:
change idoc data
To change the Inbound IDoc,
1)Go to WE05/WE02, enter the Inbound IDoc number and Execute.
2)Double Click on the segment (Page Icon) where you want to change the Data.
3)In the Screen 'Display data record for IDoc' , Go to menu 'Data record' and click on 'Display - > Change'. Then it display a popup information 'Changes to the IDoc are written to the database' , then press enter .
To Process the Edited Inbound Idoc , execute the program 'RBDAGAIE' in SE38 and enter the IDoc number.
Thanks
Sekhar
AND
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Also if you have something to say about it will be appreciated
thanks

Assistance on books purchases (missing chapters with error messages)

Hello,
Two chapters are missing from the French version of Steve Job's biography I bought from iTunes?
Do you know who to contact to get assistance on books?$
The following error message appears:
"This page contains the following errors: error on line 1 at column 23: Extra content at the end of the document error on line 1 at column 23: encoding error
Below is a rendering of the page up to the first error."
Thanks in advance for your answers.
Kind rgds,
Cyprien

Downloadiung iBooks 1.3.2 app whichsolvethe problem !

IMessage on iMac is up-to-date, but missing conversations with new contacts.

I use iMessage on both iMac and iPhone.
Contact lists sync properly.
On iMessage on the Mac, I'm able to see the latest messages sent to any contacts listed. However, all of my contacts are not listed. What I also noticed is that they're all contacts I added recently.
Thanks. Any help is appreciated.

Depending on your provider, MMS might not be supported at this time.
see this page: http://www.apple.com/iphone/how-to/#messages.sending-and-receiving-messages
Turn MMS messaging on or off:
In Settings, tap Messages, then tap MMS Messaging to turn it on or off. You may want to turn MMS >Messaging off, for example, to prevent sending or receiving attachments when fees apply.
NOTE: The MMS Messaging setting doesn’t appear if MMS isn’t supported by your carrier.

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Creating a planned order with error "Material requires configuration"

Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
Phong

See also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano

Hello Technical Experts... please help me on this error :- 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.

In my A/P credit memo screen i have incorporated a column for adding reference to closed A/P Invoices. upon filling this field with DocNum of APInvoice certain other fields also get filled from an SQL query. One among them is the TaxCode. My problem is that the TaxAmount(LC) field at the last row of the matrix is not filled with the appropriate value, it remains 0. On trying to add the document or pressing the link button on the TaxAmount field a status bar error message pops up showing, 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.
Please Help me solve this issue.
Thanks in Advance
Rajeev

Hi,
Please check SAP note:
1860926 - When updating a Purchase Order via DI API "-12109 Tax data
is missing..." Error occurs
Thanks & Regards,
Nagarajan

Boot data configuration missing or with errors

Similar Messages

Maybe you are looking for