Dv7t-3300 volume control slider bar not working

I have a dv7t-3300 and all of a sudden the volume control slider has stopped working. It's stuck displaying mute although the computer itself does have sound. I tried performing a cold reset as some people on line have suggested to no avail. Is there any possible resetting that can fix it?

Hi gnobel,
Welcome to the HP Forums! I understand that your volume button is stuck and will not slide. I will try my best to help you with this issue. I suggest Performing a Hard Reset or Forced Reset on the Notebook. I also suggest Downloading or Updating Software and Drivers for HP Computers.
I hope this helps, let me know how it goes.
Thank you,
I worked on behalf of HP.

Similar Messages

HT201401 My volume control buttons are not working on my Iphone 4s....

but this only occurs when I don't have headphones in or I am not on a call. If I have headphones in or if I am on a call using either the earpiece or speakerphone I have full volume control. If I am using my phone to listen to music or anything else where there is audio the volume buttons do not work. When I press the button the buttons the ringer icon appears on the screen but there are no bars under the icon and it doesn't move the volume. I have tried rebooting the phone as well as blowing out the headphone port and the charging port. My phone is updated to the latest release. Any help would be much appreciated.

Hi
Are you talking about the function buttons F1-F9?
These buttons work in connection with FN button; i.e Fn + F5
The Value Added Package as well as the Toshiba Flash Card Support Utility needs to be installed in order to use the flash cards (the menu on the screen showing the function buttons)
These software parts can be downloaded here:
http://www.mytoshiba.com.au/support/computers/satellite/a660/psaw3a-07t00r/download?os=25
Note: before you would start with new installation try to restart the flash cards: all programs -> Toshiba -> Flash Cards

Iphone 6 plus slide bar not working

My iphone 6 plus slide bar would not work. I couldn't turn phone off, couldn't do anything except use Siri. Used Siri to face time a friend to ask for help but for some reason once she answered my phone unlocked. Have no idea why. Hope this helps someone.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Volume control slider position not saved at exit

Just upgraded to 6.0.2.23 and when I started it for the first time, I noticed that the volume slider was pegged at max. Thought nothing of it and turned it down. The next day, when I started iTunes, I noticed that it was pegged again.
It appears to me that the position of the control is not saved any more. It was in the previous version and this is new.

Hello,
In Captivate 5 there is a volume control widget. Did you try that? Open the Widget panel (or the Widget Workspace), click on the button Browse, you'll find it in the Gallery, Widgets folder.
Lilybiri

Volume control on keyboard not working?

I have an HP Pavillion dv7-3165dx Entertainment Notebook. The volume control on the keyboard is not working anymore. How do I turn it back on?

Hi,
Try downloading and installing the latest driver from HP on the link below - this may be the same one applied by HPSA, but try installing it again.
ftp://ftp.hp.com/pub/softpaq/sp52501-53000/sp52790.exe
After the installation has completed, restart the notebook.
If the above fails to solve the issue, try reinstalling Quick Launch Buttons from the installer on the following link.
ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53135.exe
Again, restart after the installation has completed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion dv7-1240us volume control touch sensitive not working

vista 64bit
the touch controls for the volume, wireless on/off, and mediasmart are not working. i'm getting annoyed with contacting hp over this. does anyone have a similar issue and hopefully a fix? i'm about to use this laptop for target practice with my glock and ar15
This question was solved.
View Solution.

I have a dv7-1245dx and just started having the same problem......only had it for a few days....

Volume in menu bar not working

I can adjust the volume by opening the sound preferences, but not in the menu bar or the keyboard buttons. I've tried deselecting "Show volume in menu bar" and reselecting, but it didn't make any change.

One thing I just realized after I plugged in my BT headphones is that my computer seemed to reset itself to HDMI speakers or something for the output. I think this is because I have two monitors. So check in your volume preferences to make sure it has built-in selected or if you're like me, my bluetooth device.

TS1630 Hi I have a problem with my iPhone 4S, I have no sound from my speaker ,keyboard or notifications , and my volume control buttons are not working is anyone experiencing this? Any help would be great full, also I have reset the iPhone many times.

Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
Thanks

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Volume control button does not work as it should on Satellite P

Hello.
I rotate the button that controls the volume and i realise that it doesnt follow me!!
I increase the volume and it decreases it and with strange irregular way (very shortly)...
I decrease the volume and even it does it or it does nothing!!!
Can someone help me with that??

What notebook model do you have?
Ive got a U400 and Ive got the same volume control.
I read here in the forum about very similar issue and the guy solved this by cleaning the contacts.
There was a dirt and dust which affected the volume control functionality.
The volume control level jumped around.
I dont know how he did this but I think a compressed air spray should help you.

Volume control(s) will not work on my I Book please help !

* INFO: White 2003 G4 I Book PowerPC 1.07GHz 256 MB Safari 3.2.1 133MHZ
!!! PLEASE HELP ME !!!
I'm going nuts here...
This morning everything on my old 2003 white I Book was great. It was operating VERY fast and fine.
I turned on my computer this morning, everything worked great, and I was reading things on the Net just fine.
I then saw there was a "Software Update", two of them actually, they were a "Security Update", and also a "Java For Mac 10.4 Release 8".
I downloaded both of them successfully through the Software Update feature.
After doing that I restarted my computer, and everything seemed okay.
But now the audio on my computer is gone, or messed up somehow. NO it is NOT on mute. The volume says it is on full blast, but there is no volume at all.I played YouTube videos, I tried a regular physical audio CD, I tried radio from the internet, all no sound. I tried disconnecting my speakers, I tried a full restart, I "verified preferences" and "repaired preferences", and I also put in my Tiger original disc and booted from that and ran "First Aid"... none of these have worked.
When you click the little volume button(s) up/down from the keyboard it simply shows all volume bars to the full "all the way loud position", and a circle with the diagonal line through it just underneath that.
I looked around in System Preferences in "Sound" and saw nothing wrong there from what I could tell.
I have no idea what to do and am very frustrated and do NOT want to have to redo my whole computer from the very beginning again with the Tiger disc, I have already done that 3 times in the last two years.I know this must have something to do with the Software Updates I did this morning.
Anyone ?

Boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway.
Next, boot from your drive in [Safe Mode|http://docs.info.apple.com/article.html?artnum=107393] and repair permissions. You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer. Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and done a bit of spring cleaning at the same time.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
Many of us do not let Software Update do updates. We download them from Apple and install them one by one, verifying the drive and repairing permissions before and after with Disk Utility, testing between each update. And, of course, backing up the drive completely before hand should something go wrong. We can then restore in a matter of minutes.

The music buttons in the control centre are not working ,What should i do to get them working

the soft music buttons in control centre are not working,
what should i do to get them working

Try trashing apple.com.dashboard.plist from preference library and restarting Mac.
Quit all applications.
Open Finder- Click the left most icon on the Dock.
Holding option key click the Go menu from the menu bar.
Select Library and then Preference folder.
Select apple.com.dashboard.plist and move it to trash.
Restart Mac.

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

[SOLVED] Brightness control over keyboard not working, but it works...

Hello,
I recently got a new laptop at work and I put a fresh Arch on it.
Almost everything works perfectly, but I have one weird issue.
I can control backlight of my display via ACPI; I wrote a simple script for it:
pabre@pbr-laptok:~$ cat /usr/local/sbin/brightness.sh
#!/bin/bash
DEV=/sys/class/backlight/intel_backlight/brightness
MAX=`cat /sys/class/backlight/intel_backlight/max_brightness`
ACT=`cat /sys/class/backlight/intel_backlight/actual_brightness`
MIN=0
STEPS=10
STEP=$((MAX/STEPS))
if [ $1 == "+" ]; then
if [ $((ACT+STEP)) -le $MAX ]; then
echo $((ACT+STEP)) > $DEV
fi
elif [ $1 == "-" ]; then
if [ $((ACT-STEP)) -ge $MIN ]; then
echo $((ACT-STEP)) > $DEV
fi
fi
exit 0
I put myself a sudoers entry for it:
root@pbr-laptok:~# cat /etc/sudoers | grep pabre
pabre ALL=(ALL) NOPASSWD: /usr/local/sbin/brightness.sh,/usr/bin/pacman -Sy
And it works like a charm, when run from a terminal:
pabre@pbr-laptok:~$ sudo /usr/local/sbin/brightness.sh -
So, my next step was to bind that script to appropriate keys on my keyboard (Fn + UP/DOWN - which are XF86MonBrightnessUp and XF86MonBrightnessDown)
My window manager is Awesome, so I put to the config:
awful.key({ }, "XF86MonBrightnessUp", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh +") end),
awful.key({ }, "XF86MonBrightnessDown", function () awful.util.spawn("sudo /usr/local/sbin/brightness.sh -") end),
among others like touchpad toggling, volume control, etc (which are working without issues)
And now, guess what... Those keys fire that script, change the brightness and after second or less - it comes back to old value! You can see that display blinks (for example gets brighter and moment after - it goes back to previous state).
I tried to debug it, putting to the script something like:
if [ $1 == "+" ]; then
if [ $((ACT+STEP)) -le $MAX ]; then
echo $((ACT+STEP)) > $DEV
cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
sleep 1
cat /sys/class/backlight/intel_backlight/actual_brightness >> /tmp/br.log
fi
And the first entry was that what it was supposed to be, while te other (second after) Was again the old value.
Does anybody have any idea what "reverts" my changes to the /sys/class/backlight/intel_backlight/brightness and why it works without issues when simply run from a terminal?
Last edited by PaBre (2014-03-16 17:10:54)

I think that I've found partial answer.
When I changed key binds to another keys - it works!
But even then, when I press XF86MonBrightnessUp or XF86MonBrightnessDown, the brightness level gets reset. And now they are not bind to anything (at last not explicit).
So it looks that I have to found how to decouple the internal, not working as expected, bind to these keys.

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

Control-clicking does not work in Finder

Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
Any idea on how to fix this? Thanks a lot!
David
Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

David,
Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
If so you may be able to uninstall/reinstall the associated application.
You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
;~)

Dv7t-3300 volume control slider bar not working

Similar Messages

Maybe you are looking for