DVCPRO HD 720p60 NEED TO EDIT IN FCEXPRESS

CLIP INFO: DVCPRO HD 720p60, dimensions 960 x 720. On opening in FCE screen says it does not have codec. Upon opening in QT -- pop up says need another compenent to play [does not say what component]. MPEG Streamclip and Voltaic will NOT open video -- just audio. I have quad G5 PowerMac [NOT intel]. Can anyone help with solution or program to download to convert so I can edit in FCE? OS Leopard 10.5.8.
With apreciation -- Susan

You need the DVCProHD quicktime codecs. They first appeared with Final Cut Pro 4.5. FCE has never supported that format as far as I know.
You need someone who has Final Cut Pro 4.5 or higher to convert the files to AIC for you.
Good luck,
x

Similar Messages

Editing DVCPRO HD 720p60 Varicam 59.94 footage for a 29.97 video

Hi,
We're having to re-edit a video that was shot on DVCPRO HD 720p60 59.94 Varicam, but was originally dubbed to Digibeta and edited in SD at 29.97.
We've captured the orginal DVCPRO HD Tapes. My question is what is the best workflow to get a final product of a HD video at 29.97 frames?
Should my sequence be edited at 720p60 59.94 frames, and then the final video converted to 29.97?
Should I edit in a DVCPRO 720p60 sequence with a 29.97 timebase?
Or should I batch convert all the source material to 29.97 fps beforehand?
I checked out the DVCPRO HD Frame Rate Converter, but this makes new clips without the audio, which I find ridiculous.
This project may also be edited by someone on a 1.6GHz G4 with FCP 4.5 (I shudder at the thought), so dropping the clips into a 29.97 timeline may not be an option.
Thanks in advance for any tips on a DVCPRO HD workflow.
Chris

what is the best workflow to get a final product of a HD video at 29.97 frames?
Edit DVCPRO HD 720p at 59.94. Output via an HD capture card to 29.97. You need to go to Digibeta again, right?
Should my sequence be edited at 720p60 59.94 frames, and then the final video converted to 29.97?
Yes.
Should I edit in a DVCPRO 720p60 sequence with a 29.97 timebase?
No.
Or should I batch convert all the source material to 29.97 fps beforehand?
No.
This project may also be edited by someone on a 1.6GHz G4 with FCP 4.5 (I shudder at the thought), so dropping the clips into a 29.97 timeline may not be an option.
OK...that is a solid version of FCP, and it supports DVCPRO HD. How will you output?
Shane

Missing DVCPRO HD 720p60 Codec

Hey All,
Was given footage to convert to DVD but cannot playback picture because my Quicktime Software lacks this codec (DVCPRO HD 720p60 Codec). Also, attempted to open with Final Cut Express but had the same issue. Any idea if and how I can get this codec, I need to burn to DVD today with Picture and cannot get footage in another format, is there any hope?
Running Mac OS Extended, 26.29 GB available on Disc.
Thanks!
Josh

That's a Final Cut Pro editing codec. You need Final Cut Pro to work with that codec. You'll need who ever sent you that video to convert it to something you can work with.

Exporting DVCPRO HD 720p60 Quality Problems with P2 footage.

I have ingested several clips from P2 cards some shot at 24 and some at 60 using fcp 5.1.4. When I go to export out a QT file I choose file>export>using quick time conversion. Under format options I select DVCPRO HD 720p60 for compression type, but I get no quality settings under the compressor heading to modify. Just Motion, preview and data rate. All of wich are locked... When I hit okay the movie settings dialog box reads Compression:DVCPRO HD 720p60 Quality: Medium Dimensions: 960x720 (1248x702) (Compressor Native). How do I change the quality to best? A friend told me he had the option to change in fcp v 5.0.1. Also, in the Sequence Setting Dialog Box under QuickTime Video Settings I select Advanced and it shows me the compression type DVCPRO HD 720p60 and Motion with Frames per second, but the box under Compressor is blank as well. Is my software faulty or am I going about exporting exporting a high quality QT HD 720p60 file the wrong way?
Secondly, when I ingest footage from a P2 card does it maintain the frame rate data that it was captured at digitally regardless of the projects audio video settings? I ask this because one project I did the easy setup after I already created a sequence by mistake with dv settings and the footage show a vid rate in the bin at 23.98 fps regardless if it is footage shot at 23.98 or 59.94. When I made a new project using the easy setup from the start and ingested a clip shot at 60 it show in the as vid rate of 59.94 not 239.8 like the first project I made. A tad confused as I feel I am not getting the best quality out of my footage. Does this have to do with setting the camera to 24pn for variable frame rates? Or does the vid rate pull from the project setting?
As a side note, some of the footage I export appears to be slightly grainy, not sure if this is a result of the setting problems I am having.
Thank You in Advance!!!
Best,
Hans

If you are trying to export and maintain the same quality you have in the timeline then you don't need to use conversion. Just export to Quick Time Movie and check the box for Use Current Settings and Make Self Contained.
rh

DVCPRO HD 720p60 Footage. Field dominance set to "None" Should timeline ?

Hey all, I got some footage from a new client. I got it on a drive, so I wasnt the editor to pull it from the source tapes. Anyway, the clips read "None" for field dominance. I'm wondering if I should set the timeline sequence to "None" or "Lower" for proper playback. For output it will go to a BetaSp Deck or possibly back to the DVCPRO Deck. Lastly, the clients want to have DVD's made.
Any suggestions about the proper way to set up appreciated.

What you need to do is set the Easy Setup to DVCPRO HD 720p60...then make a new sequence...and use what settings it has. Or, if you have FCP 6, when you cut a clip into the timeline it will ask if you want the sequence settings to match that of the clip....click YES.
Since this is progressive footage, field dominance will be set to NONE by default.
Shane

DVCPRO HD 720p60 footage on a citidisk import issues

I record to my citidisk HD in the DVCPRO HD 720p60. I setup fcp to this exact setting and import my files. Once imported...I get a window that says I should recapture or use media manager to recompress and optimize the footage.
I use media to recompress the footage"DVCPRO HD 720p60" ...I get and window that says that the compresion I have chosen does not match the original files!
I open one of the original clips in qt and view the prooperties..and sure enough it is DVCPRO HD 720p60! When i set the recompress to DVCPRO HD 720p30 it works with out a message window. and last....nomatter what I do none of the files play in the timeline! They need to be rendered!!!
OUCH!!!

I have no experience with the Cineporter, but did you choose the appropriate EASY SETUP? You need to choose DVCPRO HD 720p60, then DELETE SEQUENCE 1, create a NEW sequence, then use that.
Does that do it?
Try that with your DVCPRO HD 720p60 stuff. If that doesn't work (sorry, dunno WHY you are getting that message. Must have to do with the Cineporter) then try DVCPRO HD 720p30, create a new sequence and go from there.
Shane

DVCPRO HD 720p60 playback problems

Hi all.
Started to edit some footage shot on DVCPRO HD 720p60 (1280x720) and I cannot get it to playback on my Westinghouse HD monitor through my Blackmagic HD Extreme Card.
I get playback on the desktop but image on the monitor is still framed. I get fine playback in other formats so I wonder if it is a RAM issue. In Motion with the same footage I get full playback through the same card if I do a RAM preview.
Thoughts?

I had some problems with this same thing a while back. You can check this thread but I never really solved my issue. Same thing, I could only get one frame to show up.
http://discussions.apple.com/thread.jspa?threadID=413814&tstart=0
Note: I was using the Decklink HD.

Using CS5 - need to edit and save pdf

I have a pdf file that is a sales flyer. I need to edit just the first page of the 50 page pdf file. I can open and edit page 1 no problem. I need to know how to save it back into the complete pdf file as page 1. Right now all I can figure out is how to save that individual page.
Thanks for your help.

You cannot. You still need Acrobat or InDesign somewhere in there to merge your edited page back with the others. That being said, the whole thing could still explode in your face as PDFs are simply not meant to be editable work files...
Mylenium

I need to edit text in a jpeg file. How do I do that?

I need to edit text in a jpeg file. How do I do that?

Unfortunately you can't. A JPEG is a flat raster (pixel-based) image file which has no awareness of "text" inside it. You could try to erase the text and graphic under it and then recreate the text, but it's best to do so using a mastering format such as PSD (Photoshop) or PXM (Pixelmator), so that you can export as JPEG but keep your layered master for later editing.
Matt

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

Can't open my pdf file in Word it is converted to word but I need an editable copy

I can not open my file in word it is converted to a word file but it will not open and I need an editable copy

Hi,
Please let me know the exact workflow you are following.
Does it occur with all files?
Are you trying to convert from within Reader or from Browser.
If from Reader then make sure you are signed in within Reader
Also try updating Reader to the latest v11.0.09 and check.
Regards,
Florence

I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

I'm going to answer my own question:
Easy steps
Locate the document in the Finder.
Control/Right-Click on its icon.
Select Show Package Contents
All images and embedded objects appear in ‘Data’ folder
From this blog
http://vernonchan.com/2013/10/how-to-extract-images-from-apple-pages-5-0-documen t/

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

See your other thread.

I need to edit a re-occurring event in calender on my iPhone and there is no edit button for that event. How do I edit or delete it?

I need to edit a re-occurring event in calender on my iPhone and there is no edit button for that event. How do I edit or delete it?

I am not sure how this works but it seems that it may be all or nothing.
To turn off Facebook events on your device:
Settings > Facebook > Calendars > Off
If you do not want to disable everything, maybe this thread will help:
https://discussions.apple.com/thread/4349443

I have photoshop and muse but need video editing which plan would be best for me.

I have photoshop and muse but need video editing which plan would be best for me.

Photography plan is $9.99 and each added program is $19.99 so do the math and decide if you want the entire plan
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)
-http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
-http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

DVCPRO HD 720p60 NEED TO EDIT IN FCEXPRESS

Similar Messages

Maybe you are looking for