DVD authoring / compatibility problem.

I would like to know if anybody can help me with a very frustrating situation in which I find one of my video productions: after producing a YOGA video and going through a very happy production and postproduction period, we decided to Author ourselves a DVD for replication and this is what happened: after editing in final cut I compressed with compressor then went into DVD studio pro 4 and did the authoring following all the steps that we learned with the video tutorial of Larry Jordan which basically recommends to use Roxio toast for the final burning, everything looked good and chapters and extra audios, menus seemed to be well done, then we went into the testing for compatibility issues and we found that we could not play the DVD either in PC nor in 90% of the DVD players, but we could see it with no problem in any macintosh available to us, amazed of the outcome we send the DVD disc to the replicating company for their diagnosis and they told us that we had a problem with compatibility and that they need to re-author almost everything with a cost that we did not have in our budget. I decided to try not making the final burning with Roxio and did it with DVD studio 4 and the same thing happened, for a while we thought that we did something wrong in the process and we repeated several times with the same outcome, I suspect it has something to do with deciding which regions to make it ( we always choose all the available and we left unchecked the section for anticopy and macrovision because we thought that the replication business needed to apply that part. Tried to get some info from them and we only got more confusion, they told nothing about the anticopy issue and the only answer they gave us as the possible cause of the problem was that is a problem related to Mac G5 of recent production that they produced DVD only compatible with Mac computers which seems to me a very surrealistic answer difficult to believe…finally I am in a situation in which I am delaying my clients video and cannot tell why and also we made an investment in software in order to give authoring services to our clients that I can’t use or offer anymore... And the replicating company is telling me that they cannot really tell me what the problem is so I can solve it and just pay for the replication but they can solve it for me paying an extra cost. I would be very thankful if somebody helps me.

Yeah...we would need alot of info from you to pin point the issue here. First of all, replicators only press plastic. They generally know nothing about DVD. Have you produced many disc in the past, especially for replication? If not, you need to hire someone who knows what they are doing. There's too much that goes into DVD. Its much more involved than just editing
You said you went for testing? Who tested it? how?
ALL your steps - bitrate, type of audio, ect ect.
Message was edited by: Eric Pautsch1

Similar Messages

  • NEW - DVD Authoring lounge

    http://www.adobeforums.com/cgi-bin/webx/.3bbf771c/
    Why should Premiere Pro & Photoshop have the lounges?
    This new forum is especially for all general DVD authoring questions, problems, discussions - whatever you want to talk about/rant about/praise/slag off - this is the place to do it.
    See you all in there

    Please HELP!!
    During DVD build in Encore 1.5 I get a message:-
    'Cannot find session file - transcoding failed'
    I need to complete the project to a deadline!!
    I've successfully built many projects on Encore 1.5.
    Any advice woud be appreciated.
    Tim O'Dwyer

  • DVD authoring problems since adding external drive-coincidence or problem

    I've connected an external drive to home unit to store footage. I feel this external is a little slow compared to my Mac but not sure how to find out.
    Anyway, I create mpv files for DVD authoring. Same process as always EXCEPT the external housed footage. Build DVD as always. Now my boss has these DVD locking up or pixelating. Yet, if she plays an older disc it still works fine in her system. Her other DVD player sometimes does not recognize the disc. I've even created the mpv files and went to FT work to build the disc. It eliviated the problem but did no cure it.
    This problem does not happen on all discs.
    All these problems happened with the very next disc and almost all the discs that have been involving the external. Coincidence or problem.
    I intend on getting a LaCie external to use. We use them at FT job and never a problem. But until then:
    I'm thinking of creating a QT file on the Mac hardrive and then compress.

    AndyPeardrop wrote:
    I use the drive to run FCP and DVD Studio Pro.
    Do you mean you have the apps on external drive? = BAD
    or just using the external as media drive? = good

  • DVD Image Quality Problem

    I just began using Final Cut Studio and elected to burn my DVD from IDVD as I am not yet comfortable with Sutdio Pro. When I play back my disc on any computer MAC or PC it plays fine. However, when I play it on a set-top DVD player two problems occur. 1) I get occasional brief pilelation in a scene. It doesn't always happen at the same place in the playback. 2). Some of the video scenes (especially those which I have extended by slowing the motion, even thogh I have applied frame blending) tend to flicker. Neither of these problems occur when the DVD is played on a computer/monitor or even when played on a tv monitor using the s-video output from a computer. But both happen on the three set-top players I have tried. Any thoughts. Thanks.
    G-5 Quad   Mac OS X (10.4.2)  
    G-5 Quad   Mac OS X (10.4.2)  

    Welcome to the world of authoring DVDs. It is very difficult to troubleshoot the exact problem. For starters, iDVD did its job, it made a DVD compliant disc that plays on a DVD player. It plays better on your computer DVD player for a variety of reasons. Your computer has much more sophisticated hardware/software for DVD playback than does a tabletop unit. It could simply be that a progressive scan tabletop DVD player may give you better results. The point being that two different players can yield different results. Artifacts/ pixilation can be by-products of MPEG2 compression (which is what iDVD does to create a DVD). It is helpful to have a basic understanding of what makes a DVD a DVD. When you record on mini-DV you are recording to an already compressed format. Arguably a very good compressed format but compressed nonetheless. This means information is being tossed at the point you are using the camcorder. iDVD, or any DVD authoring app on any computer, Windoze or Mac, compresses this material even further into the MPEG 2 format for playback via a tabletop DVD player. Now mini-DV has about 30 frames per second (NTSC). MPEG (in a very basic nutshell) takes a picture about twice every 30 frames and uses this as a reference frame and then only records the motion difference between that reference frame and the next time it creates a reference frame. So you go from 30 frames/second to TWO, with motion difference! This is how one hour of DV which is 13 gigs, can be compressed to fit onto one DVD. Two hours would be 26 gigs of DV compressed to one DVD! Hence the general quality difference between one-hour and two. And keep in mind that is compression will show artifacts that may have always been there but you didn’t see until the other 28 frames where tossed out. Slow motion can also be very difficult to encode. I have found that going under 50% slow-motion is problematic. One work around is to create your slow-motion sequence and send it back to tape and then re-import from the tape. Now it is no longer a software effect but an actual 29.97 fps clip. Clips with a lot of motion, quick pans & zooms, hand held shots and so on, will also suffer more artifacts because the whole frame is in motion and thus difficult to encode. Which is why a tripod is recommended to keep the frame steady!
    Just some thoughts… welcome to the Discussions!
    Mike

  • My Personal Workflow for DVD Authoring in Encore

    This is being posted, due to requests for workflow recs. from a few other threads. It is separate from those threads, but I will try to link to his post in those.
    The DVD Specs. are quite strict on what is allowed, and in what exact form, in a DVD to be compliant with the standards set forth. However, there are some differences, other than image sizes, between NTSC and PAL. Depending on where you are, and where your DVD will be played, these can, and will, be different. Rather than type out a list of the specifications, Ill point you to: http://www.dvd-replica.com/DVD/dvdprimer-1.php for some reading and references.
    That said, Adobe Encore can handle, on Import, more formats and sizes, than are allowed, by the DVD specs. In most cases, it will fit the Assets to DVD, but not in all cases. Also, some Assets are more likely to work, without problems, than are others. Rather than list all of the file formats, etc., that Encore can work with, Im only going to list a potential workflow, that has been known to work, with the least effort, for me. My suggestion is that if you have Assets that are different, you look into getting them into perfect compliance, BEFORE you bring them into Encore. This allows Encore to do, what it does best, create DVD Spec. DVDs for play on a television set through a set-top player, or on a computer through a DVD software player. This article will not address a lot of other possible inclusions, such as ROM content, interactive DVD, multiple Audio Tracks, Closed Captioning, or Subtitles. It also assumes that one is burning to a DVD and not to Blu-ray Disc, or another medium.
    Most of the thoughts here come from a few sources, the prime one being Jeff Bellunes book, The Focal Easy Guide to Adobe Encore DVD 2.0, by Focal Press, ISBN 0-240-52004-1. Other sources are Adobe Press Classroom in a Book for Encore, and various articles and discussions from the Adobe User-to-User Forums, for Encore and Premiere Pro.*
    There are many possible ways to acquire Assets (the actual Audio and Video files that you will use), and I will not cover all of these, nor will I go into great detail on preparing your Assets for Encore, other than to say that its best to Export from your Non-Linear Editor (NLE), or convert with third-party programs, your Assets so that they are most likely to work in Encore. Your choice of NLE, or conversion program is totally up to you. There are freeware, shareware and commercial ware programs for all of this. Reading the various Adobe forums and other video production forums, plus a healthy dose of Google, should yield a whole toolbox of utilities. No one utility, from $50,000 authoring programs to freeware file converters can do it all. Like a good mechanic, you need the best tools for the exact job. Also, there are other DVD authoring programs, and some are less strict, than is Encore, about what they will and will not accept. Your final DVD may play perfectly, or it may not. Encore tries to assure that you will get perfect playback on as many different machines, as is possible.
    Ill step you through my personal workflow, but you have to understand that this is not the ONLY way to do it. You also must realize that your exact needs might dictate that you do it otherwise. All Im giving you, is what has worked for me in hundreds of successful DVD Projects. It is based on trial-and-error, a lot of help from the regulars in the Adobe forums, Jeff Bellunes book and other resources. How you adapt this to your personal workflow, or your particular Project is up to you.
    [Go to Page 2 for the rest]

    [Page 2]
    To start, plan your Project from beginning to the finished product in this case, a DVD that can play on a TV, or on a computer, that is compliant with the DVD specs. I usually have edited all of my Video and Audio Assets, using Adobe Premiere Pro (PP), and Adobe Audition (AA). Any still Assets have usually come from Adobe Photoshop (PS), whether they are Menus, or Graphics of some sort. This allows me great flexibility in the creation and Export of my Assets. In a parallel universe, one might have a client, who hands them Assets, that have to be manipulated. One then has to find the right tools to get the Assets into a format that will work.
    I plan each Project, and usually draw out a flowchart (not unlike the Flowchart Panel in Encore) in Adobe Illustrator (AI). This gives me the layout and navigation of the DVD, and lists all of my Assets, showing all of the links from Menus to Assets, often by way of Playlists, or Chapter Playlists. From this flowchart, I then create a list of all of my Assets, noting what form they are in, and also which ones will, or might, need some additional work.
    Next, I gather these Assets from their location on my systems hard drive (HDD). There, I have built a folder hierarchy that differentiates the Assets type, Still, Menu, Music, Audio (associated with the Video) and Video. All are below my main Projects folder. As I have created these Assets, I have control over their form and format. All of my Video is an elemental stream (Video only no Audio, not muxed) in the DV-AVI format. All of my Audio is an elemental stream (Audio only no Video, not muxed) in the AC3 (Dolby Digital) format and is usually DD 5.1 Surround Sound. All of my Music (for Menus, etc.) is in AC3 format. All of my Menus are PSDs, and are either built FROM the template Menus in Encore, adapted for my needs, or are constructed in PS using the exact same conventions as the template Menus in Encore.
    I have created a template Project in Encore, that has my normal structure in place. It is empty, except for a Bin structure, which lists my Assets: Video, Timelines, Audio, Music, Menus, etc.. This template has been saved from Encore (remember, its otherwise empty), and I Open it in Encore, and immediately Save_As, to my Project folder, with that Projects name. I use Save_As for two reasons, it leaves my template Project untouched and then locates my Project in the proper folder and is still in Encore on my screen. If I were to use Save_As_a_Copy, Id then have to Exit and Open that copy. My way automatically gets me to where I need to be, with my new Project (named appropriately) open in Encore. Im ready to get started.
    With my Assets list in hand, I Import these into the pre-made Bins. First, I Import my Videos, as Timelines into my Timelines Bin. This brings in my DV-AVI Video files and creates a Timeline for each. When done, I split out the Video, into the Video Bin leaving the Timelines alone in the Timelines Bin. If I have any Video for my Motion Menus, I Import, as Asset, into the Video Bin, along with the Videos that were used to automatically create my Timelines. Next, I Import, as Asset, my Audio AC3 files into the Audio Bin. Same for Menus, as Menus, into my Menus Bin. Music AC3's are Imported as an Asset into the Music Bin. Should there be any Stills, that are not Menus (highly unlikely), they are Imported into a Stills Bin. Now its time for some drag-n-drop. Each Timeline has its Video on it, and I go to the Audio Bin, and drag the appropriate Audio file to its respective Timeline. Because I edited and Exported these files as elemental streams (non-multiplexed, or muxed), I know that they are EXACTLY the same Duration. Now, I set the appropriate Poster Frame for each Chapter/Timeline. To step back a bit here, I need to point out that I always edit my movies in PP, my NLE of choice, and keep each Chapter on its own Sequence. I Export each Sequence as a separate file (one Audio and one Video). I almost never use Chapter Markers, as each Chapter will be a separate set of Audio and Video files, and will have it own Timeline in Encore. The only times that I use Chapter Markers, is when I need some additional navigation within a Timeline, but that is not often. This is just how I edit. I will not cover other methods, but there are books and articles that discuss other ways. None is right vs wrong. They are just different, and this one is mine.
    From my Flowchart Panel, I know if I will have a Video (with Audio) lead-in as my First Play. I also know exactly what my Menu structure will be. Most of my Projects have a Main Menu with sub-Menus for Scene selection, or other features navigation. I also know how many Playlists I will need, and create these. There is usually a Play All Playlist, as my Chapters are all on a separate Timeline. I seldom use a Chapter Playlist (similar name, but different than a Playlist). These are all stored in my Playlist Bin. Now, I can now start Linking my Assets.
    In PS, I will have named my Buttons to correspond to the names of my Chapters (remember mine will be each on a separate Timeline, which have also been named appropriately). I leave the Button numbering, which is different than a Buttons name, in the same hierarchal order, #1 is the lowest on the Button Layer Set palette, with higher numbers in ascending order. Because my Buttons are already named, Ill take each Menu into the Menu Monitor and do a Ctrl-a (Select all) and makes sure that Sync Button Name is unchecked in the Menu Properties Panel. I do this for all of my Menu Buttons - heck, I have already spent the time in PS to create the proper Text Layer, and have changed the Buttons names to what I want them to be, why mess that up now.
    With the Buttons, in all of my Menus and sub-Menus named appropriately, I can look in the Flowchart Panel and know exactly where I need to Link. One could almost do this blindfolded. Its here that I make sure that the End Actions get me exactly where I wish to go. Also, by using Playlists for things like Play All, I can set the End Action there.
    Last, I address my Menus, regarding Motion. About half of my Menus have some form of animated Background. These are always non-muxed DV-AVIs (stored in the Video Bin). Almost all of my Menus will have Audio, in the form of an AC3 (stored in the Audio Bin).
    Everything has been Linked, all End Actions have been set, nothing is left in the Orphanage, and it is time to Check Project. Oh, if I do have animations on my Menus, Ill Render Motion Menus and Preview them. I always leave all functions checked in Check Project and run it. I note any warnings, or errors, and go about fixing these. Ninety percent of the time, I only get the occasional warning, and it will be about End Actions. As these are only warnings, I note them to make sure that, in Preview, things function as I wish. There are almost never any errors, but if there are, I begin fixing them. Note: the Check Project function really only checks the navigation, as per the DVD specs. It does not check that your Assets are compliant. Since mine are, before they are Imported, this is never a problem.
    Now, I Preview, and Preview, and Preview. Normally, I am able to leave Button Routing to Automatically Route Buttons, so I seldom have to worry about that. Also, since I either built my Menus FROM the Encore Menu Templates, or created them PER the Encore Menu Templates, I seldom have any Button overlaps.
    [Go to Page 3]

  • Frustrated....it has limited chapter markers...is there other dvd authoring

    Look like DVD SP is not comptiable with education projects. My projects are usually have alot menus and alot of chapter markers.... I had to split video tracks into few because of too many chapters and actions. Do you know if that DVD SP is possible to pass limited chapteer markers? Or there is good DVD authoring software for Macitnosh? Someone suggested me to use Sceneraic (PC software) and it is way too expensive. Hope there I will get a help.

    Oh, Guys,
    While we're at it, There are other serious limitations DVD SP has when it comes to the larger projects requiring lots of end actions (over the years, every time I read the DVD-Video Specifications, I find one or more additional cool capabilities DVD SP left out):
    1) Cells. DVD SP only allows creating 256 cells in the *entire Video Title Set*. The DVD-Video Specifications provides for thousands in the VOB, grouped in thousands of possible PGCs which DVD SP also has no way to construct (see below).
    The paltry few cells that DVD SP does allow placing per VTS, are not allowed to have end actions associated to them, or be targeted by the Connections. Only cells flagged as Markers can have end actions - and then only 52 of the Markers in a Video Title Set (Track) can have end actions (I had a post around here about a year ago explaining why); and only cells designated as Markers show up as navigation targets.
    That's a serious limitation for larger projects - and for many smaller projects.
    Cells in DVD SP are good to bound buttons on video, and set as the layer break, is about all.
    2) PGCs. DVD SP's method of allowing extra one sequential title PGCs (Program Chains) is by creating Stories. But all the Stories in the VTS can only be constructed from the same Markers (same video segments) in the Track. In Scenarist, you can create thousands of PGCs and cells to have all the end actions you need - Check out the logical element and asset domain placement scenario in the "Scene It" DVD games, authored in Scenarist. Thousands of all the logical constructs allowed by the Specifications are there to check out. Note: Those discs can take quite a while to load in the DVDAfterEdit demo, or other IFO Editor browser.
    But even though DVD SP allows the creation of Stories (one sequential Title PGCs in the VTS), it does not allow the creation of non sequential PGCs (except for one or two non sequential PGCs in one limited in usefulness circumstance) - which is where the heavy duty arrangement of thousands of PTT's (chapters), Programs, and Cells take place. Gotta be able to create bunches of those non sequential PGCs for those large interactive projects.
    I'm preparing an article that goes over the 'regular' limitations of DVD SP and how it has set up some less than optimal functioning for what it does allow. For instance, large projects can slow to a crawl and drop in player compatibility percentages during navigation of the DVD SP generated disc, simply due to the default structures users often create. For instance, the biggie - too many Tracks; There are penalties for trying to use *an entire Video Title Set*, complete with full VTSM menu domain structure (DVD SP hides this from the user), in the place of a non or sequential Title PGC.
    There's more to it, of course. But I've spent the last 11 years working on ways to get around these DVD SP limitations. And for most project types, I've been successful helping my authoring studio clients. But one thing all serious DVD SP authors with good paying clients need to consider, is getting licensed with Scenarist Professional ($5,000), which I did several years ago. When you see how blazing fast even simple and complex DVDs output by Scenarist navigate, compared to the same project output by DVD SP, it will be become very clear which project types should be done in which app; and your client will be best served.
    Take care,
    Trai
    New Constellation Technologies / TFDVD Research Labs

  • How do I export a 720p 30fps video that is suitable for NTSC DVD authoring?

    I have some 720p HD videos, but they are 30fps. I want to encode them (using a separate program) to SD MPEG-2 for authoring an NTSC DVD. How do I conform these files to the 29.97fps frame rate needed for DVD authoring? Do I export the video as is @30fps, but set the MPEG-2 encoder to use 29.97fps during the encode? Will that sync cause problems or stuttering? Or do I need to do something else to the video before it can be encoded to MPEG-2?
    I am quite new to using HD video, and never had to work with 30fps material before.

    What camera did you shoot this on?  Also I thought you said all the clips were 720p, the reason I'm asking what camera you shot this stuff is because with several camera's even though they say 720p they are actually recording as 720PsF which will appear to cs4 as interlaced footage. It also appears as interlaced to FCP and also media info and Gspot.
    http://provideocoalition.com/index.php/atepper/story/psf8217s_missing_workflow_em_part_1_b enign_psf_versus_malignant_psf/

  • FCPX - Compressor - DVD Authoring Workflow - Help

    What is the best workflow for DVD creation using an iMac.
    We are shooting HD video on 2 cameras.  We import the AVCHD folders into FCPX.  In order to work real time we turn on Proxy.  We then send to compressor to create an MOV file with AAC audio as shown below.  We then use Sony DVD Architect or about to try Adobe Encore for DVD authoring as we need to create a PLAY all and chapters for all 26 scenes of the video.  There are 2 acts and each is about 45 minutes long.
    Import of the raw video is about 20 minutes, import into FCPX is long (never actually clocked it).  Export from FCPX to compressor is zero.  Compressor to MOV is 14 HOURS (7 Hours per act)!  Use in DVD authoring program is zero but export is another 3 hours???
    (Compressor export settings - video was shot at 1080i 1280x720
    File Extension: mov
    Estimated size: unknown
    Audio Encoder
              AAC, Stereo (L R), 48.000 kHz
    Video Encoder
              Width: (100% of source)
              Height: (100% of source)
              Pixel aspect ratio: Default
              Crop: None
              Padding: None
              Frame rate: 30
              Frame Controls: Automatically selected: Off
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 53
              Min. Spatial quality: 25
              Key frame interval: 24
              Temporal quality: 50
              Min. temporal quality: 25
              Maximum data rate: 20.972 (Mbps)
    Compatible with Mac

    First, I need to say that I still do 90% of my work in FCS. Although I'm intrigued by FCPX and using it more and more, I have a whole lot of learning ahead. There are a lot of people on the FCPX boards who are using it as their primary editor…and you may get more informed advice over there.
    But to your workflow questions, I think I would see if your system can handle optimized media (Pro Res) rather than Proxy. I just did a two camera shoot and had no trouble cutting in Pro Res – with the media on a FW 800 external drive. Then I followed my usual workflow: after finishing, export as a QT movie with current settings so that I have a Pro Res master that I can bring into Compressor to re-purpose for DVD, Web, Broadcast, Mobile Devices.
    As to your specific DVD needs, you probably already know that Compressor can output DVD's with a simple menu that respects chapter markers that are set within Compressor (not FCPX). So there's only one encode: Pro Res > MPEG 2 plus AC3,  which processes fairly quickly. Fair warning: there was a recent poster in this forum who had a boatload of trouble with a long video and over 20 chapters. I have not encountered those problems myself, but I don't believe he ever found a fix for his.
    If you require a complex menu, then probably Encore is the way to go unless you have access to DVD Studio Pro. I would imagine that Compressor's markers would be recognized by Encore, but I'm not positive. They definitely are recognized by DVD Studio Pr – and for that matter, iDVD.
    BTW, you state the video was shot 1080i…what is the significance of 1280X720? You know that all DVDs are 720X480.
    Good luck.
    Russ

  • Professional wedding dvd authoring??

    Hi
    i am looking for professional dvd authoring software for Mac. (not iskysoft or equivalent as they are not fully customisable)
    something with fully customisable menus etc with no watermark (iDVD)
    im not looking for a free download version, willing to pay good money for good quality software
    similar to power director 13 on, dare I say it the PC.
    surely Mac Must beat that!!!
    editing on FCPX so no need for new editing software.
    help please.

    Actually, they're both dead. They just haven't fallen down yet...
    What happened was Blue Ray... and numerous problems with DRM (digital rights management) and the squabbling between just about every Japanese electronics company you can think of...
    Steve Jobs said: Blue Ray is just a bag of hurt. (He wasn't too happy with HDMI either!) He had enough and killed development—all of it. New Macs don't even have the DVD drive anymore and there will never be a BD drive. The way technology is progressing, it is my opinion that BD and DVD will not survive. You can get a better, more superior quality with smaller file sizes and players like Roku, etc. and Apple TV etc. (I have a cheap "IncrediSonic" player and the quality of 640x360 h.264 videos is easily on par with DVD quality on an HD tv set [or better].)
    I was keeping up to date with DVDSP and the last version I have is 4.2.2.  If you require DVD authoring, it may help you if you have an older Mac running Snow Leopard (which was the version of OSX on my 2009 iMac when I bought Final Cut Studio 3) up to about Mountain Lion to run DVDSP on. I've read that DVDSP runs "fine" under Yosemite, but I cannot personally confirm that for you (I can open it, but I haven't put it through its "paces" in years.)
    You can do "real authoring" DVD Studio Pro. DVD Studio Pro is about the only software package for Mac that I know of that allows you to actually "program" the disc with instructions (like many commercially created DVDs — animated menus, hidden layers, etc..) Everything you've ever seen a DVD do, you can create in DVDSP. If you have Motion 4, you can import motion projects into DVDSP for use in creating DVD menus and such. It is a very complete development app for the media. I was happy to have it — except — I never could equal the render quality with a 1 hour DVDSP created disc that I could get from my Panasonic set top DVD recorder (recording tv shows) even at 4 hours of programming per disc. (Panasonic's DVD quality with upsampling was "who needs blu-ray" — literally.)
    I bought FCP Studio 3 mainly for DVDSP (4 years ago now...) I haven't used it (DVDSP) in at least 3 years now. You have to ask yourself "Is it worth it?"  Both Apple and Adobe have abandoned DVD (and Blue-ray). Commercial DVDs/BDs are still being made, but you can't even get a decent price on a set top recorder anymore — they're becoming "rare" (Panasonic has stopped development of those boxes, and they were the best.) All of these companies have read the handwriting on the wall, so to speak (or they're the ones writing it!) You can do better with an 8GB SD card (and the right player) media-wise, than you can with DVD...or BD for that matter. [Also consider what effect UltraHD/4K/5K and up(?) will have as time goes on. More nails in the DVD/BD disc coffin.]
    In the meantime, iDVD should not watermark your media... I have no idea what is up with that. It's easier to learn and use, shouldn't cost very much and you won't feel as bad when you ultimately abandon it. And it's better than Toast.

  • Dvd authoring question

    first of all, i make basic, simple check dvds for my clients using compressor & dvd studio pro but i don't do any real dvd authoring. i've been editing hi-def material (dvcpro hd/apple prores hq 720p) for about 4-5 yrs and have been delivering hard drives to dvd authoring facilities for commercially released sd dvds. they play back letterboxed 4:3 on my sd tv set and i've been told they play back 16:9 on widescreen units. i know little about the authoring process so i'm not sure how that magic happens.
    a client of mine (who produces commercially released dvds) who's my last sd holdout is making the leap to hd (at least the test files were apple prores hq 720p 59.94). when i spoke to this client's dvd authorer, he said he still wanted the show in an sd format (preferably tape) and said it didn't make sense for them to be shooting in 16:9 since the sd dvds that he'll be producing are 4:3 so the picture will either be cut off or squeezed. understood but like i said no one else i've dealt with has ever mentioned that as being a problem. i provide the highest quality files i can and in the authoring they downconvert for an sd dvd that plays either letterboxed or full screen 16:9 depending on the playback setup. can anyone explain to me how that process works so i can explain it to him since my client has a long relationship with this dvd guy and doesn't want to leave him. thanks.  

    Really makes sense to shoot in 16:9 HD.  It's pretty simple to crop to a full frame 4:3 quicktime for SD DVD authoring.  You can actually setup a DVD project so that it'll play 4:3 full screen when appropriate (and even do a pan and scan - although I've never done it myself).  But as Shane says, for any sort of shelf life, 16:9 is the way to go.

  • Are There Compatability Problems Wtih Adobe Photoshop CS2 On The Windows Portion of iMac?

    I understand that there are compatability problems with CS2 and lower vesions of the creative suite in relation to Leoapard OSX. Are there any compatability problems with CS2 for Windows if I install it on the Windows (using XP) partition of an iMac that uses the Leopard OSX?
    Please advise. Thanks.

    If its not running in Leopard you should be fine.
    don't confuse running PowerPC software in Rosetta (PPC emulation) with running CS2 in XP which is native. It like apples and oranges. there is nothing in common.

  • Final Cut Pro - does it come with a DVD Authoring Software

    Hey guys!
    I'm just planning to change my Windows to a Mac.
    I was looking around for a DVD Authoring Software and everyone was suggesting DVD Studio Pro. So I looked it up to get it's price but I couldn't find it at all. I would really appreciate it if someone could tell me where DVD Studio Pro is available. It would also be great if you could suggest any other DVD Authoring Software compatible with Mac OS.
    Thanks very much!

    You either have not drunk the kool aid or did not get Apple's version of the future memo.
    The DVD is dead according to Apple corp. And, they are doing everything possible to sweep it away. DVDSP has been discontinued.
    If you want to stay with Apple apps, your options are iDVD or  Compressor 4 ( limited menus). Otherwise, start looking at the Adobe CS suite (particularly Encore).
    Welcome to the brave new world.
    x

  • HT5085 I would like to upload my music library from my PC to the Cloud through iTunes Match.  I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac.  Will I have compatability problems?

    I would like to upload my music library from my PC to the Cloud through iTunes Match.  I also will be purchasing a Mac in the near future and would like to download some of that music from iCloud to my Mac.  Will I have compatability problems?

    You should have no problems. To add a second computer or device to iTunes Match, see:
    http://support.apple.com/kb/ht4913
    Regards.

  • I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

    I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

    NEF's for the D7100 should work with the latest version PSE13
    You can download here and try free for 30 days:
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

  • Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc

    Replacing Firefox 3.6.16 containing my history, bookmarks etc by version 4.0, I find that it will not open on my Mac Power PC G4 running on OS 10.4.11. Is there is a compatibility problem and how do I retrieve version 3.6 with my bookmarks etc.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    When you install one of the above it will use your existing bookmarks etc

Maybe you are looking for