I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

Similar Messages

I have a mac mini updated to 10.7.4 and can no longer read .rw2 raw files. Can anyone help?

I have just updated to Lion to to 10.7.4 and can no longer read *.rw2 raw files, before this, at 10.7.3 it works perfectly!

see > 10.7.4 lost RAW format: Apple Support Communities
plus others just to your right in "More Like This"

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash but somehow managed to delete the bin instead. Does anyone know who to reinstate it?

I have accidentally deleted the trash bin in my mailbox and can no longer move any deleted mail into the trash. I thought I was removing all the emails from the trash bin but somehow managed to delete the bin instead. Does anyone know who to reinstate the bin?

You are running 10.6.8? If yes, I assume you have your install disks? As the trash bin is part of Mail app and that is an integral part of the OS, the only way I know to get it back is to reinstall the OS. You won't lose any files, just reinstall the OS over the top of the current system.

I upgraded my AirPort to 5.6.1 and can no longer print to my HP Photosmart C6180 all in one printer from my MacBook? - help.

I upgraded my Airport to 5.6.1 and it stopped printing from my HPPhotosmart c6180 all in one printer. I have a Macbook with version 10.6.8
I also have a Xfinitiy internet connection. Help

Figured out that as long as a scan is unreadable & RAW, it can never be used or open. Boo.

Upgrade from 10.3.9 to tiger and can no longer restart or shutdown

I upgraded my powerbook G4 with 1 gb of ram with tiger recently and ever since, I can not reboot or shutdown without holding down the powerbutton. The system shuts down all programs and then hangs on the desktop with no applications running... just a blank screen.
If I press the powerbutton, the window that prompts you what you want to do (shutdown, restart) comes up, but does not do anything.
I use file vault.
Any ideas? I can not find anything on this on any support site. I can not reinstall the OS again... as I can not restart into the CD or boot from a CD by holding down C.
HELP
I'm about to trash this mac and by a PC!

Since you can't boot from the Tiger install disc to run Disk First Aid repair, you can run FSCK instead with instructions for doing so provided per this link.
http://docs.info.apple.com/article.html?artnum=106214

Upgraded Playbook to 2.0.1.358 and can no longer sync with PC

I upgraded to the latest software version for the PlayBook via wi-fi. I had no issues until I attempted to sync my PB with my pc to copy over pictures and videos from my PB. I do this sync about every 3 weeks or so. When I first plugged in the Playbook to my pc (Sony Vaio w/ Windows 7) I received a message about drivers being installed. When my Playbook was acknowledged by BB Desktop Manager it incorrectly read that my PB software version was 0.0.0.0 and prompted me to upgrade. I downloaded and installed the software (again). All looked successful again, however when I attempted to access the Media Sync options I received a message that "media services are not available" and that "your blackberry device is not compatible with this features". Now, when I connect my PB to my pc via USB cable it does not even trigger DM to open. If I manually open DM then it recognizes that a PB is connected and starts a full back up. If I let the back up complete then it triggers me to do an update to the latest software version (which I already have installed but DM continually shows that my PB software version is 0.0.0.0). If I install the upgrade as instructed then I am prompted to disconnect and reboot the PB. When I do this loop starts all over again. A full back up starts and I am prompted again after that to install the latest PB software. How do I get out of this loop and back to being able to sync all my media from my PB to my pc. Also, when I have my PB connected and I look at Windows Explorer, it does not list my PB as a drive. However, if my PB is connected to my wi-fi network I can see it on the network. I copied my pictures/videos via the network (turned on sharing on the PB) as a workaround but this is not how I wanted to manage my file transfers. PLEASE HELP. I spent all day yesterday googling for answers and similar experiences by others and I don't know how to fix this. I am tempted to create an incident request with Blackberry/RIM to resolve this but thought I would try here first. Appreciate any responses.

I to have exprianced this problem. I upgraded my os and now when I try to connect my Playbook to my computer, the Desktop Manager does not connect and prompts my to upgrade. After turning off my Virus Protection, firewall, trying several times, rebooting both playbook and computer, I started to install the upgrade through Desktop Manager. After a few minuites I decided this was probably counterproductive so I canceled the install. Not sure but since the upgrade, my computer will not connect to the Playbook. Ideas?

I just upgraded to the latest version of iTunes and can no longer sync

Worked fine before upgraded of iTunesto the latest version now cannot sync iPod touch. error message is that will be wiped and replaced by library which is too big for the device so I have to wipe it and reinstall manually which takes at least four hours. Cannot backup as not able to in iTunes and do not haveiCloud. Use win7

Again:
You said: " Cannot backup as not able to in iTunes" What happens when you try to backup?
What are you doing when you get this message: "I have followed the solution but am not given the choice to select the device."?
What do you mean by: "The dates and times on both match."?
You are not telling use what you are doing and what happens when you do it.

Just upgraded to iOS 7 and can no longer take a video, can only take photos

just upgraded to iOS 7 on iPad 2 and can no longer take a video, can only take photos

Try sliding the words Up/Down or Left/Right to select the various modes.

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!

This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me.

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

The context has expired and can no longer be used errors making farm unusable

There are a couple of other posts on this forum about the message "The context has expired and can no longer be used" but they all suggest something related to time and time zone differences. This is not the case in my farm and I have disabled
the security checking of requests on my web applications. Hopefully someone at Microsoft is very aware of this and is working to resolve it because my farm and many others are unusable like this.
I have dug through all of the ULS errors when it happens and there is nothing useful. It barely even registers as a message although, I have not turned on verbose logging, which I am about to try. I have SP 1 installed. Just to be clear, this is happening
on SharePoint 2013 Enterprise.
I have been fighting this for a month. I can add a few things about the farm I am trying to fix:
1. It was a WSS 3.0 farm that when through a 2007-2010-2013 migration in short order.
2. I believe it is under-powered on the hardware side. All VMs on a host shared with 40 other VMs, some fairly busy. Here's the virtual farm breakdown:
-1 WFE with 12GB RAM and 2 cores
-3 app servers with similar resources
-No paging file on C: on any VM. This is a decision by sysadmin. Paging on D: is system managed. Probably irrelevant.
3. Rapidly clicking from link to link seems to bring on the failure much sooner.
Any suggestions even about how to troubleshoot this would be appreciated.

Ultimately, I think it is a time sync issue across the farm. We still have request management off on all boxes because I cannot get the admins to resolve this issue but, in my lab environment I ran into a similar thing.
I may turn RM back on later to see if it comes back but here's what I think happens: In production we have 2 ESXi hosts and our SP environment is all AD (of course). The clocks are all out of sync, sometimes beyond 5 minutes. (The time sync for AD is something
I believe a lot of admins don't understand when running virtual.)
If you allow ESXi to try to sync the time for all guests you run into problems. Maybe they are more pronounced with SharePoint. Anyway, VMware and AD start fighting over the time (check your event logs) and, for us, the clocks across the domain get out of
sync beyond the 5 minute allowable window.
I recommend disabling time sync from host to guest and do what MS recommends: make your domain controller the master time server and configure it to get its time from a reliable source (which can be a single hardware host over NTP). Make other domain controllers
sync from the PDC. The other windows machines will all sync to the domain when they log in. This will prevent SharePoint from issuing tokens from one machine that are out of sync time-wise with the other machines and thus throwing the "Context has expired
and can no longer be used" errors.
Note that disabling host to guest time sync is not as simple as just clearing / un-checking the box in the VSphere client. That doesn't do it. You will need to Google for the 6 or so custom properties you must add to each guest to prevent VMWare from re-synchronizing
after certain hardware events.

Difficulty scanning slides on my Epson V600 running Lion, Adobe Photoshop CS6, and can no longer use the Epson scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?

I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...

I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac. That would be Mac OS Extended (Journaled).
PCs can also read and write to the Mac formatted drive.

HT5225 use a imac os x 10.4.11. I can't access my mail as of late yesterday. Is there a system problem or can I now longer use my .mac email address. I do not have any other device including a phone. thanks

use a imac os x 10.4.11. I can't access my mail as of late yesterday. Is there a system problem or can I now longer use my .mac email address. I do not have any other device including a phone. thanks

I reset the password. As you instructed, but that was not enough to solve the problem.
To solve the problem I also did the following:
For my user name I included @me.com., but I'm not sure that made any difference.
I think the key to solving this was that I pushed past the error I got on the Outgoing Mail Server window. I wasn't sure I should do that but I was desperate:
Next I got this window and checked SSL.
That was it!
Finally I went into account preferences and checked the outgoing mail server settings to be sure the server port was correct. It was.
Thank you for your help.

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

Similar Messages

Maybe you are looking for