DVD burner still not working

Even with the 10.6.2 update my external firewire dvd burners are still not working with Snow Leopard but they work fine with Leopard.

Hi KT when I check in the system Profiler I see
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
(1394 ATAPI,Rev 1.00):
Manufacturer: Prolific PL3507 Combo Device
Model: 0x1
GUID: 0x50770500002EAA
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
(1394 ATAPI,Rev 1.00) Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x12804
Sub-units:
(1394 ATAPI,Rev 1.00) SBP-LUN:
Another thing that I have noticed is that if I unplug then plug the firewire cable from the burner back in whilst a disc is in it then it will mount.

Similar Messages

P505-S8980 BluRay DVD Avatar still not working.

I downloaded the supposed patch for the BluRay that will allow the Avatar disc to run. I think the info is showing in my BD software that it's been updated. Yet it is still not working. Any process that I missed? Thanks.

I've solved this same issue using the Microsoft Fixit for the DVD-BLURAY and It worked just well.
My computer is a QOSMIO X75-ASP7302KL I hope this help you to solve yours.

My LG40 DVD burner does not work with iMac. Pls advice

It is a portable DVD writer. According to LG system requirements are Windows 7 or Mac X v10.54 or higher. Can´t open files burnt on my old Mac and not possible to burn files from iMac.

Both Rudegar and Babowa are correct!
You need to supply your own burning software for your iMac to burn discs from your new external optical drive.
Since Apple doesn't integrate optical drives into many of their Mac models any longer, Apple doesn't supply any type of disc burning software any longer.
Older versions of the iLife suite of apps (iLife '09 or '11) have a compatible version of iDVD.
You would need to purchase either of these.
Another purchased CD/DVD burning software is Roxio Toast.
OR there is the free, open source optical disc burning software, Burn.

Went through setup for DVD PRO still not working

So I have done what are the protocalls that are appropriate for DVD PRO and the problem now is that I cannot drag my compressor file into DVD PRO.
It just bounces back to Finder or where ever else I find it. I give up don't know what to do now I am stuck. Thanks for everyones help. Also I still get the
incompatible format pop up-I am totally against a wall-do not know what to do at all.

I captured from mini-dv tape so I used dv 48khz or dv ntsc for my setup codec. I used send to in FCP to compressor. I used best quality DVD 90 minutes in Compressor. I am working with NTSC. I imported my compressed project clicking on asset. When I did this I get a box that pops up and says incompatible format.
Problem is I have no idea how to get a compatible format or what they are talking about since I followed the
correct protocol or at least it seemed correct to me. I know it is something I am missing-I just do not have the
knowledge to trouble shoot this particular problem. So that is where it stands of this moment.

My cd/dvd burner does not work in itunes

a error message keeps poping up everytime i start an try 2 burn a cd/or dvd on itunes

I'm having a similar issue heres what mine says
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Gateway SX2855
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0032A8FC03234FF0
Current user is not an administrator.
The current local date and time is 2012-04-06 12:59:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 (x64) is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

My dvd/cd player/burner is not working...

My dvd/cd player/burner is not working, and I don't want to spend $$$ to fix it. What dvd/cd is available at a good price?

You have given us little to go on. What Mac product line and model? Different Macs take different optical drives.
Also, when asking what is available, telling us you general geographic location is a help. That way, someone won't recommend a vendor that cannot ship to your location.
Although you cannot determine from the non-intuitive forum title Apple chose, the forum you found is for Mac hardware made before 1998. Anything here get very few views. If you have a newer model, we can ge the Hosts to move you to a more active forum and more eyeballs.

The dvd slot is not working

i was just having a dvd burned yet it was showed that the dvd verify was failed, then the dvd slot ejected the dvd automatically,
now the slot is like blocked and no more dvds could be inserted, no matter how many times i tried to reboot the computer, the slot is still not working.

Sounds like the dvd drive has failed. You can have it replaced by apple or you can buy a external dvd drive that connects by usb port. Any brand external dvd drive will work with your mac. It doesn't have to a apple brand.

After successful installation of iTunes 10.6.1, iTunes will not open. Tried complete uninstall and reinstall, still not working. Cannot sync iPad or access iTunes at all. Any suggestions?

After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes. I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers. I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version. I have been without iTunes on my PC for a month. Any suggestions on how to resolve this issue?

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

Dvd player does not work after Leopard upgrade

I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

Calendar reminders (notifications) still NOT working, even after 602 update.....

So, Verizon Wireless released the 602 update to the Gingerbread OS for the Droid X, and the calendar reminder popups (notifications) are still NOT working properly.
This is VERY frustrating, as I use these notifications (reminder pop ups) for everything from business related (meetings, etc) to personal (when to take medicines, etc).
It's also VERY frustrating because BEFORE Gingerbread, when the Droid X ran Froyo, there was NOT a problem with the calendar and its reminders.
I would assume that there are MANY, MANY people being affected by this issue...and I wonder why Verizon hasn't "put the heat" on Google to FIX this issue which is clearly related to the Android OS, more specifically, Gingerbread.
I used to like the Droid X very much, but now I'm counting the days until I can get an iPhone. At least you know what you're getting, and won't have an update "break" functions of the phone.
So, Verizon, if you're listening... PLEASE get this calendar notification problem FIXED.
Thank you!!

I'm the original poster of this topic. And let me tell you the steps that I went through to try to get this resolved, and then I'll let you know the ultimate solution that I wound up doing and am happy about (but am NOT happy about Verizon & Motorola).
1) updated DroidX to latest 602 update.
2) went into admin partition and deleted cache
still did not work
3) went into admin partition and did hard reset (complete restore) from inside the admin partition
Still did not get calendar reminders to work.
4) went into normal phone and accessed "Restore Phone to Factory Specs" from the Privacy menu in settings. This caused the phone to do a similar hard reset as in step 3, except it also ran the beginning software (welcome to your Droid, we now have to activate your phone, etc).
Calendar reminders did not work. (REMEMBER... when I say they did not work, I mean that the reminders would go off EVENTUALLY , but anywhere from 30mins AFTER the appointment to literally HOURS AFTER the appointment).
5) Created a COMPLETELY NEW AND DIFFERENT calendar at Google under a DIFFERENT screen name/account. Configured DroidX to completely forget the original calendar and to start using the NEW one.
Reminders still did NOT work properly.
6) Once again, tried hard resets.
NOPE. Still did NOT work.
7) CALLED Verizon Wireless and described my problem and they pretty much didn't/couldn't help and said they would "send a report to the engineering team" about the problem.
And HERE is the thing that REALLY BURNED ME UP about this WHOLE ENTIRE DEBACLE..... my DroidX worked 100% correctly BEFORE the Gingerbread upgrade to the Android OS. When it was running Froyo (previous OS), every single calendar reminder on my original calendar worked every single time, on time, every time. BUT... AFTER Gingerbread, it just didn't work. (Don't get me started with the phantom powering on of the phone after it was powered off problem that STILL exists after the 602 upgrade).
SO.......... what did I eventually do??? Well, by this time, I was eligible for early upgrade at upgrading pricing and switched to the iPhone4 (I didn't want the 4S). AND YOU KNOW WHAT??? Using the ORIGINAL GOOGLE calendar that I used before all the above stuff happened, my reminders on the iPhone4 work all the time, every time. These include appointments that I made 8 months ago to new ones that I make every day. And for all of them, the iPhone4 sets the reminder chime off EXACTLY when I want it to.
Now, I realize that this doesn't address the problem for you, Ganamide (who wrote above), but for me, I finally got to the point where I had missed critical appointments with clients and couldn't wait around for the DroidX Calendar Reminder Problem to be resolved.
So Verizon Wireless and Motorola (maker of DroidX) and Google (maker of Android OS) all have "negative points" in my book for allowing such a problem to continue without proper resolution. Apple, on the other hand, gets "positive points" in my book for making a product that is rock solid and works well.

Satellite A500 and Win8 - DVD drive is not working

I have upgraded my Satellite A500-17X to Windows 8,but now my DVD Drive will not work.
Anyone know how I can get it working again.
Thank You.
Cumbrian

Solution here:
http://www.csd.toshiba.com/cgi-bin/t...e&soid=3516888
*Uninstall the Toshiba programs:*
• TOSHIBA Recovery Media Creator
• TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown.

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

I want to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive is not working. Is there the possibility to buy an online Update?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
If your hardware supports more recent versions then:
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

My DVD burner is not recognized by Premier Elements. Burns fine in Nero.

Premier Elements will not find my DVD burner. It works fine in Nero. I have been to tons of help site. Removed registry filters, uninstalled and reinstalled. Same problem.

A Nero module MAY be your problem
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements 13 WILL write a DVD or BluRay to an ISO (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Hi I am using MAC OS Yosemite10.10.3 and I have a problem to update my photoshopCC cause of error U43M1D204 eventhough I have deleted AAm Updater/1.0/ but It still not worked. How can I fix it.

Hi, I am using MAc OS 10.10.3 and I have a problem to update my photoshopCC because of error U43M1D204. I have deleted AAm Updater/1.0/ but it still not worked. How can I fix it please help.

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

DVD burner still not working

Similar Messages

Maybe you are looking for