Hi I am using MAC OS Yosemite10.10.3 and I have a problem to update my photoshopCC cause of error U43M1D204 eventhough I have deleted AAm Updater/1.0/ but It still not worked.  How can I fix it.

Hi, I am using MAc OS 10.10.3 and I have a problem to update my photoshopCC because of error U43M1D204.  I have deleted AAm Updater/1.0/ but it still not worked.  How can I fix it please help.

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Similar Messages

  • Updated my IOS 7 now some of my games are not work, how can I fix this problem?

    I have updated my Ipad to the IOS 7 and now some of my games/apps are not working, how can i fix this or revert back to what I had before?

    I'm afraid you'll have to wait until both Apple and the makers of your games/apps upgrade to new versions.
    Apparently there are still some issues with iOS7 that are being dealt with and the same with some apps.
    As for going back, I don't think you will be able to get this information from these forums...

  • My iphone 5 camera is not working how can i fix this problem ?

    My iphone 5 camera is not working how can i fix this problem ?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Phone is frozen in  a middle of a call and my top restart button do not work, how can i fix this

    phone is frozen in  a middle of a call and my top restart button do not work, how can i fix it

    Bummer.
    Without having the top button, you couldn't do a hard reset.
    I'd say you might be looking at backing up and restoring through iTunes unfortunatley.

  • Speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default.

    speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default. I also have no voice with Safari or any other apps including music!

    If your speaker is broken, then you may need to get a repair done.
    Are you unable to hear anything at all, or is it just one speaker in particular?
    If it is just one speaker, where's it located?

  • I updated my iPad to iOS6 but Siri did not load, how can I fix this?

    I updated my iPad to iOS6 but Siri did not load, how can I fix this?

    Siri is not compatible with the iPad 2.

  • Someone stole my iPhone I have find my iPhone app but it's not working how can I add my iPhone to d app from my iPad???

    Someone stole my iPhone I have find my iPhone app but it's not working how can I add my iPhone to d app from my iPad???

    Having the app is irrelevant.
    The ONLY thing that matters is whether "Find My iPhone" was enabled on the missing device before it was lost/stolen.  If it was not enabled, there is nothing that can be done.

  • My iphone5 camera keeps freezing and turning black and purple and becomes fuzzy. I tried to reset it a few times but it didn't work. how can i fix this?

    How can i fix my camera that keeps freezinf and turning black or purple? I have already tried reset multiple times and it didnt work.

    Hello there mmon11,
    If by reset you mean this process from iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting from here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then alright thats one step down. I would recommend this article as well, specifically sections 1, 3, and 5 which will resolve it if the issue is due to software.
    iPhone Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/phone/#section_1
    Here is section 1 to get you started.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Regards,
    Sterling

  • I just bought a macbook air, I want to cut en paste, but it doesn't work, how can I fix this?

    I just bought a macbook air, I want to cut and paste but it doesn't work.  How can I fix this?

    that all works, no problem. but if I want to devide my songs per genre, it doesn't work.  in itunes you find cut, but I can't select it.  I just can copy my songs or photos.  So I've got everything twice.  Can you explane me how I can do that? cause it's my first Apple computer

  • My iPod nano (newest version) screen lights up but does not work how can I fix this?

    Need help please!!
    I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers.
    Does anyone know how to fix this?
    Any help would be greatly appreciated,
    Thank you for your time

    Did you already try to reset the iPod?
    How to reset an iPod nano (6th generation)
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.

  • My Norton tool bar No longer is visable and does not work, how can I fix this

    My Norton 360 that saves all my passwords for me does not work on fire fox 4.0. How can I go back to the previous version? I was not given a warning that Norton 360 wouldn't work until after I had already down loaded 4.0, or I would not have downloaded it!
    I did not know that the tool bar was going to disappear!

    Norton says they are going to update 360 in April for the Firefox 4.0.
    You can get Firefox 3.6.16 here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

  • I have an HP Touchsmart 610 1130y pc and the touch screen is not working - how can I fix it?

    Does anyone know how to get the touch screen on an HP Touchsmart 610 1130y pc working again? I get an error message "CLL error: 80004005.

    Ingo, the reset has worked, pressing home and sleep buttons together! The problem is that the screen turned black and the iPod does not start again.
    Yesterday, I wrapped the iPod with a plastic. Today, the slide to unlock is moving, but still not reaching the end of the slide bar.
    What should I do now? Try to charge it and reset it on iTunes?
    (thanks, you're really helping me)

  • The firefox plugin checker is not working, how can I fix it?

    I just updated the Adobe Flash Player and now the "Plugin Checker" starts but nothing happens. I did notice an active buffering circle, but it went on for several minutes with no results. I am on a laptop using Windows 7 - Pro, and the latest Firefox (34.0.5) and a OK internet connection.

    No problem, saneman. Looks like you are very "sane" after all. :D The problem is on Mozilla's side (I confirmed with a developer) and they are having an issue with the plugin check page finding the correct version number. It seems after every Java update they have this problem.
    There is a bug filed on the issue and I'm told it's being worked on. So I will check on it from time to time.
    But I wish they would just remove Java version checking from that page for Mac users (as it seems the problem is more complicated for Mac users than Windows users) so Mac users would not be confused by this. I'd like them to just provide a link every time to the Oracle page that has the latest Java plugin for Mac regardless of what version number you have. That would be a WAY better solution than this broken situation we have now.

  • There are 6 keys in my MacBook Pro that are not working, how can I fix them?

    I am experiencing issues with 6 keys (6, y, h, n, =, /) on my very old MacBook Pro, when I boot up my laptop these keys just dont work anymore.
    But when I used the keyboard viewer it works, can anybody help me or guide me on how I can resolve my problem?
    Big thanks!

    Hey PurplejinG,
    Thanks for the question. After reviewing your post, it sounds like the keyboard keys are not working correctly. I would recommend that you follow these articles, they may be able to help you resolve or isolate this issue.
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    OS X Mavericks: If keys on your keyboard don’t work
    http://support.apple.com/kb/PH13809
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I've tried to fix as per your FAQ instructions, but Zeon does not work, how can I make ADOBE my default to bypass ZEON?

    I can not open many things b/c Zeon Plus doesn't work. It is not shown when I open/check current plug-ins - it's listed as unknown. I would prefer to have Adobe, as it doesn't crash all the time. How can I change this?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for

  • Can not view pictures on browsers after latest Ipad update to Ver:4.3.5 (8L)

    I just updated my Ipad to the latest rev: 4.3.5(8L1) today.  Now I'm not able to see pictures on CL and other browsers liek Opera mini.  Can some tell me what happen and how can it be fixed!  Thanks

  • How Can I set up a JTable columns?

    Dear All, How can I set up my JTable columns to have the amount the user specifies? for example when the user types in 50 in JTextField 1 I want the JTables columns to then set to 50. How can this be done? Thanks lol import javax.swing.*; import java

  • File/Folder Sharing - Between Leopard and Windows 7 RC

    Apologies for the cross-posting. This is probably a better place to have the issue addressed. Prior, our network setup had a shared XP folder that all PCs and Macs in the network could access (read/write). Now, due to a replaced computer, it is now r

  • File to File Interface without ESR objects

    Hello everyone, I have a requirement where our business users will  produce the .csv files in one location and we need to move to another location. I recon that we can build this File to File interface( usin FCC) without using ESR objects, can any on

  • HT204291 Apple TV Air Mirroring

    I can't have the mirroring function to work on my new IPAD 3.  I have an Apple TV third generation module and a Linksys Router EA3500.  When I turn Air Mirroring function ON, my TV screen goes blank?  Can Anyone  help me?