DVD Player not Working on OSX

Hi,
I just received an iBook G3 with OSX on it from my old boss. Everything works great except the DVD player. It is on the toolbar at the bottom but is 'greyed out' so I can't click on it. If I do, the icon gets a question mark over it.
When I looked in my hard drive, I saw that the DVD player is in OS 9.2- and the "Apple DVD Player" is greyed out there too. There is no DVD player in OSX in the hard drive.
The drive itself works- it plays cds, and recognizes the DVD (it appears on the desktop with it's correct title, etc.)I have tried several DVD's and it's the same with all of them.
I am a PC person as is everyone I know who knows computers so I'm completely at a loss. Thanks for your help!

I've checked out Pacifist, and it opens the packages just fine, they're all there, except of course, for DVD Player...I've looked at all three of my installation discs, and it's just not there. So now what can I do? I finally got a Dual Layer DVD drive, and I can't watch DVD's, InterActive's player worked for a day...now it won't run, even after reinstalling it.
If I can't install DVD player from the discs, and third party software isn't working, what should I do?

Similar Messages

  • DVD Player Not Working - Need Help Please!

    My eMac is currently not reading DVDs. The drive will recognize and automatically play commercial music CDs and software, as well as burned music CDs. However, when a commercial DVD is inserted into a drive, not only will the DVD player not recognize or play it, the eMac does not even notice that there is a DVD in the disk drive.
    Any suggestions or assistance would be greatly appreciated. Thanks in advance!
    eMac   Mac OS X (10.3.9)  

    hi there--
    there are a number of things for you to try. one is to do a pmu reset. instructions are found in step 6 of this article. http://docs.info.apple.com/article.html?artnum=34885 if you have an ati graphics emac or later, then the pmu button is on the right side, not the left. if that doesn't work, then try resetting the firmware. boot to open firmware by holding apple-option-o-f and then type in the following commands--
    reset-nvram (hit return)
    set-defaults (hit return)
    reset-all (hit return)
    the last command will restart the computer. if neither of those things works, then i would try booting to the install disk and running disk utility. http://docs.info.apple.com/article.html?artnum=106214 if that fails, then i would create a test user (system preferences > accounts, then hit the plus sign) and see if there is any difference there. let me know how that is going for you. Sherry

  • Cd/dvd player not working

    my cd/dvd does not work  it does not appear on the the computer list of drives
    does it need reinstalling ? if so how  do i do it
    This question was solved.
    View Solution.

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter. 
    Next, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Toshiba Dvd Player not working with Windows 7

    Not sure if this is the right place to put this, since I upgraded to windows 7 the Toshiba DVD Player is not working, I click on it and nothing happens, any idea what I should do?
    Solved!
    Go to Solution.

    I found my answer
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?ct=DL&soid=2466224&ref=EV

  • DVD player not working in Pavilion DV6-6102sa

    The DVD player in my laptop won't play video DVDs.
    It works okay with data discs, but films etc cause a problem - the drive spins up, and it sounds as though it's trying to read the disc, but not succesfully.
    Depending on the player depends on what happens:
    Windows Media Player may begin showing a garbled and unwatchable version of the disc, whereas VLC won't play anything. After a delay of at least 15 minutes (highly variable), the disc begins playing normally in both.
    According to device manager, the drive is a HP DVDRAM GT31L. I'm running Windows 7 Home Premium 64bit. I've tried many different DVDs, all with the same result, and I've tried both Windows Media Player and VLC with equally useless results.

    To repair permissions go to Applications -> Utilities -> Disk utility -> select the hard disk in Disk Utility, and click on repair permissions in the First Aid section.
    Did you mean to mark my thing as helpful, or solved? I see you marked it solved suggesting the problem has gone away.
    A third party peripheral is any device which you hooked up to the computer that is not made by Apple.

  • Apple DVD player not working on Mid 2011 iMac running 10.7.2

    I have a 21.5-inch, Mid 2011 iMac which came with Lion preinstalled.  When I insert a DVD, Apple's DVD player comes up with the following error:
    "A valid video device could not be found for playback. [-70017]"
    The DVD player works.  I can play DVDs using VLC, and I can use it to burn in iDVD, but Apple's own DVD player simply will not recognize it.  I hoped this problem might be solved when I upgraded to 10.7.2, but alas it has not.
    Does anyone know how to fix or work around this issue?  This computer is used daily for my media-heavy job, so leaving it somewhere for service is not really feasible unless I'm completely unable to work on it. 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    As Guest, launch the player and test. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

  • CD/DVD player not working (Toshiba Satellite L875d-S723​2)

    I purchased a  (Toshiba Satellite L875d-S7232) on August 17, 2012 from a major retailer. Recently, the CD/DVD player will not play, or even recognize, commercially produced DVD movies. As a consequence, I cannot rent or buy movie DVDs, nor will any of the DVDs in my library work now. The DVD player in this Satellite is TSST SN-208AB.
    What happens is that when you put a movie DVD in the machine, the light goes on 4 times, but the DVD player never spins up and starts playing. In the explorer, the CD/DVD icon is there, but when you try to "open" the DVD player it never spins up and a green bar goes, very slowly, across the top of the window.
    The player has no trouble with audio CDs.
    I have spent about 10 hours on this problem now. What I have tried followed all of the standard "fixes" for this specific problem on this specific machine and the correct OS (Windows 7 Home Premium). None of the standard fixes fixed anything.
    In Brief :
    1. I uninstalled all programs which use the DVD player, except for the standard suite that came with the computer at time of purchase. Also, uninstalled all CODEC packages that were not part of the original suite.
    2. Uninstalled the CD/DVD device and driver, as instructed, and the device and driver were automatically reinstalled. Did a full power cycle (including removal of the battery). I've done this solution about 4 times.
    3. Looked in the registry for a possible filter driver issue. There was none.
    4. Used Microsoft "Fix It" program, which discovered "a problem" but had no description of the problem or a reference to a fix.
    5. Ran the device driver update check, toshiba service station check, microsoft update check. All files are up to date and the correct file.
    6. Ran system files check, HDD corruption check. No problems reported.
    Nothing done so far has moderated or altered the behavior in any way. Moreover, I have noted dozens and dozens of people on the internet in different forums with the same problem. What this means is that Toshiba is losing market share bigtime on this one.
    Any fix would be appreciated.

    Hi Sense no one has replied, I will offer my 2 cents. DVD drives wear out and they also get dirty. You could try to clean it with compressed air. DVD drives are fairly cheap and very easy to replace.
    Dokie!!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • HT2499 my dvd player not working

    My dvd player on my imac is not working. It wont accept any DVD'S that I try to put in. It just started to not accept last night. I am running a Mac OS X version 10.6.8. Please help me fix my dvd player. Is there anything that may make it accept DVD's again?

     
    Cures for an uncooperative CD/DVD drive 

  • Mountain Lion DVD Player not working

    When I insert a DVD movie into my MacBook Pro, with Mountain Lion, it can not read the disk and ejects it.  DVDs played correctly until installing OSX Mountain Lion...what changed and how to resolve

    Yep, me too.  Not sure if it is just coincidence and my drive was about to fail?  I have a 13" Macbook Pro Mid 2010.
    To be honest I installed Mountain Lion as soon as it came out and have only just tried the DVD player today....
    In my System Profiler I get the attached - it says Powered Off: Yes.
    I have tried Repair Disc Permisions/PRAM/SMC/Removed Drive and cleaned - no joy.
    Any other people out there with this?
    Adrian.

  • DVD player not working in 10.4.5

    I just upgraded from OS 9 to 10.4.5 My DVD player does not work, the error message reads...A valid DVD drive could not be found [-70012]. I am using a G3 pismo powerbook. Everything else works fine. Any ideas?

    To repair permissions go to Applications -> Utilities -> Disk utility -> select the hard disk in Disk Utility, and click on repair permissions in the First Aid section.
    Did you mean to mark my thing as helpful, or solved? I see you marked it solved suggesting the problem has gone away.
    A third party peripheral is any device which you hooked up to the computer that is not made by Apple.

  • Can,t use window 7 Recovery disk my CD/DVD player not working

    my HP Pavilion Dv4-2045dx notebook crashed, forcing me to buy a new hard drive. but now my CD/DVD
    player just starts stops Buzzes than stops, with out loading the disk.. how can i reload my window 7
    recovery with out a CD/DVD player ? or is there some way to fix the CD/DVD?
    This question was solved.
    View Solution.

    Hi,
    Here's one option you could try as it will give a good indication whether there is a hardware problem with the optical drive itself. 
    Create a bootable Ubuntu CD
    The Ubuntu CD you create should run as you boot the notebook ( as should your Recovery Discs ) , so if this will not run, the problem is almost certainly a Hardware issue with the DVD drive or the sata controller.
    On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if your noteboo will run this OS from the CD.  The 'try it' option does not need to install on the Hard Drive, it just runs from the CD.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Let me know if this will run.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • DVD Player not working w/ External device

    MacBookPro 9,2 with 10.8.2.  DVD Player doesn't work with any USB external device, even apple devices.  MAJOR flaw as this issue doesn't exist on mac mini or retina macbook pro.  Why can't they use the same framework?

    The Apple USB SuperDrive is only be compatible with Apple systems that do not have a built-in SuperDrive.
    see > Apple USB SuperDrive - Apple Store (U.S.)

  • Dvd player not working with os lion

    my dvd player has stopped working since I installed Lion

    Can't really be sure that you're having the same problem since the OP never posted back about their problem and we don't know what it is, so.... have you tried an SMC and PRAM reset? That is sometimes helpful:
    http://support.apple.com/kb/HT1379
    http://support.apple.com/kb/HT3964
    I also assume you have it set to show the icon on the desktop, open it with the app of your choice, etc, etc? If other Macs read the CD, then there might be a problem with the drive. A good way for a free diagnostic session would be to make an appointment at your nearest Genius Bar - any out of warranty repair would not be free of course, but at least you'd know what is going on.

  • DVD Player not working with LION

    DVD Player crash in 10.7.2 LION - at the start of DVD Player loading -  is there a work around - I use VLC no problems

    Thanks.
    That is correct. I've determined that Default Folder X won't be the problem on my friend's MB Pro since they don't use the application. They are off for some One on One time with Apple to get to the bottom of this apparent upgrade problem with Lion.
    On a personal note, my MB Air is not able to make use of the Remote Disc feature. I'm not sure if this might be network related as I only see the MacPro drive occassionally and am never able to make a full connection to share Word files on a CD etc.
    I'll work on this more after xmas.
    Happy Holidays!

  • Flash Player not working with OSX 10.9.5

    I can't help you but Flash Player 15 simply fails to function on OSX 10.9.5. I tried uninstalling and reinstalling. Simply does not work.

    I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
    Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
    Read Before Posting: How To Get A Useful Answer To Your Question

Maybe you are looking for

  • Animated Background Question

    Hey, Ok, I wasn't sure if this was the right section but I am trying to learn how to create an animated light effect over a web image. I guess the easiest way to explain what I am looking to do is provide an example. I want to add the moving bubble l

  • How to refresh a region during tab change

    Hi All, In my page I have two tabs.There is one region each in each tab. Tab 1 region is on top of Parent View Object and Tab 2 region is on top of Child view object. Relationship is one-to-one. In tab 1 region, If populate some attributes <of Parent

  • I can't print a document in draft

    When I try print a document in draft the printer use a lot of paper at the same time.

  • Howto set ImageBase when one cannot deply to  /webapp

    I am using the BC4J html generating classes and WebBeans. I see absolute references to /webapp/imaages in the generated HTML. I cannot deploy to a top-level context on that server, so I am wondering if there is a setImageBase() method or some paramet

  • CheckSum Error for the payment interface to Bank

    Dear all, Could you shed some lights as we have just complete the client migration and encountering the 'invalid checksum' after we have run the F110 and upload the file to Bank for GIRO payment. I have called the Bank Support, as their advice is to