DVD-RW can't burn

Hello. I have a problem with my dvd-rw. I have HP Probook 4525s.
When start burning a dvd, at 2% progress stop and receive error "Burning Process Failed". I can't burn files to disc.
I have windows 8, any solutions?
I use nero for burning, but i try other softwares, the error is same (2% - burning process failed).

Try using a different brand name of disc _ avoid using cheap bargain no-name brands, especially when it come to re-writable discs_ use something like Verbatim.
Make sure your lens is clean, gently clean with a Q-tip and 99% Isopropyl alcohol.
It also depends what you burning, I believe Nero has Cinavia detection in it now.
Use Imgburn, it's free and works better the most paid for programs.
99.9% of burning problems are to do with the media you're using and very rarely the software.
http://www.imgburn.com/index.php?act=download
Use Mirror #7 provided by Imgburn.

Similar Messages

How to burn DVD and can i burn the same DVD later if its having any space..

How to burn DVD and can i burn the same DVD later if its having any space..?

This is called sessions, but it is not recommended and has been largely abandoned by software developers. This was a good thing in the late 1990’s, when opticals discs were quite expensive, and file size quite low.
applications which reportedly may do this are
- isoBurn: http://www.macupdate.com/app/mac/40109/isoburn
- others, I do not remember which ones, try SimpyBurns, Burn, Dragon Burn and LiquidCD, you will find all in macupdate.com, test which ones suit you.
Otherwise, I do not recommend you such time consuming and inefficient solutions, optical drives are being replaces by more capacitive, cheaper and more practical solutions, like external disks. But, if you insist, you will find what you are looking for.

Can't burn CDs (but can burn DVDs!!) Satellite U400-20v

hi,
I have a satellite u400-20v. There was no problem at first to read or burn a CD or DVD but after I setup windows 7 ultimate. my cd rom now can read both CDs and DVDs and can burn DVDs but can't burn CDs (data or audio). The burner gives me an error msg as soon as it begins writing the cd. My optical drive is called Mat**bleep**a DVD-RAM UJ862AS ATA device (at the device manger).
Please help
Thanx

iTunes can be a bit flaky on 64 bit Vista since it's not supported but it has been known to work.
Try updating your CD/DVD drivers here -> http://www.gearsoftware.com/support/drivers.cfm
Also, make sure the your other firmware & drivers are up to date.

New problem. I can not burn a playlist to disk.

New problem. I can not burn a playlist to disk. The 'checking playlist' now takes about one second, looks very much like a malfunction here. Seems to initialize the disk - them moves straight into 'burning/finalizing disk' which also takes about one second. Then 'burning - finishing disk takes a little longer -
Error reading is "The attempt to burn a disc failed. The disk drive didn't respond properly an can't recover.'
This happend once before a while back and I thought it was 'too skinny disks'. Using 'printable disks; seemed to fix the problem - until now.
Blank cd's can be opened in the finder and files burnt to them.
DVD's can be burned from DVD Pro.
Music cd's and dvd's can be played.
Just can't burn the itunes playlist.

lewelew
From your iMac? OS 10.9.2? iTunes? Other? please give as much info as you can about your system hardware and peripherals, OS, software, etc. Is this misbehavior new? First try? You get the idea, too much info is not possible.
CCC

How can I burn a movie to dvd when I don't have iDVD on the new macbook pro?

I have recently purchased a macbook pro and I have made a movie in iMovie, however i don't have iDVD as it no longer comes on macs so how can I burn this movie to DVD without this program? Is there a program already on my laptop or do I need to purchase one and if so what can I purchase?

ToastTitanium from roxio
http://www.roxio.com/enu/products/toast/titanium/overview.html?ClickID=dxsztmmzk 0ookbzn2brmtsr2hcomcnhysxrs

How can I burn more than 1 movie to a DVD when there is room on the disc for it. Premiere wants to overwrite once 1 movie is burned to the disc

How can I burn more than 1 movie onto a DVD? Once 1 movie is burned successfully to the disc, I try to burn another movie and Premiere wants to overwrite the first movie. One movie is 1.2 GB, second is 2.3; so there is room on a 4.7 GB DVD-RW.

susang
What you report is what it is.
Each burn to of Timeline content to DVD-VIDEO format on DVD disc results in the disc containing one OpenDVD Folder and one VIDEO_TS Folder.
Only one VIDEO_TS Folder can be put on a DVD-VIDEO disc even when Premiere Elements is not involved. I have seen that written about online, and I have
never found a way to overcome what seems to be basic behavior description of DVD-VIDEO..
Premiere Elements will allow you to write to a disc with content already on it, but only after you give the OK for erasing the disc content before going ahead
with the burn to.
If you have several movies, one possibility is to build a Timeline with the movies, use stop markers, and setup disc menus according so that the viewer
can selectively watch the movies. More on that later if wanted.
Any questions or need clarification, please ask.
Thank you.
ATR

How can I burn just a selected part of the project to DVD?

Afternoon all,
we downloaded a number of clips from our HDV that we wanted to use in making a short movie (1 hour's worth of clips will end up being a movie of about half that length). After doing that, we decided to do a 'preview' of 2 minutes worth of mixed clips (5 in total) with music.....I made a new copy of the whole project and then deleted everything that we didn't want from the original collection of 1 hours worth of downloaded clips so that the project just left 2 minutes worth of clips.
When we tried to burn this 2 minutes to DVD it seemed to be trying to do the whole project including a whole lot of nothing where I've deleted everything.
Could you please tell me how to select only the 2 minutes worth of 5 clips and audio so that I can burn only that bit to DVD and also upload it to YouTube.
A million thanks from a challenged newbie who can't find any instructions for doing this..
JON

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

Can you burn an AVCHD DVD using Premiere Pro 4.1?

Alright I've been hunting the forums and net for a few hours on this one question.
I import my AVCHD video files using Sony Picture Motion Browser for the HDR SR-12 using the full HD setting (1920x1080i) I then pull these into Premiere 4.2.1 and have created an edit, my question is, it possible to output to an AVCHD DVD i.e. a standard DVD-R with the AVCHD edit on it from Premiere/Encore?
It's easy to burn clips straight to AVCHD DVD using Sony PMB, but not an edited file.
I realize there are no menus possible if you do it this way, but I have an AVCHD capable DVD deck and an HD Capable screen and would really like to see how this looks. Anybody know any tricks or workarounds for this? It seems that this would be sadly lacking if it was not possible or simply an effort to force one to adapt the entire workflow to Blu-Ray for HD content which I am not prepared to do.
I am assuming that if you could export the same file type that came in (i.e. AVCHD .mts files) that you could then have Sony PMB burn it to AVCHD DVD but I haven't figured out how to export it as such as there is only Blu-Ray output options.
Any help, tips or tricks would be appreciated!!!!
Regards,
DSW

Answering myself here for the benefit of anyone else trying to solve this problem.
I have been pulling my hair out trying to solve this problem for the last 48 hours of utilizing AVCHD footage at AVCHD quality. I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
There is a plug-in here:
http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
Or if you want to be really sneaky, you can transfer it back onto your camera and play it straight to your TV using the HDMI cable.
Hope that helps anyone stuck with the same problem.
Regards,
DSW

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

I can't burn a widescreen DVD

In Pr 5.5 I can define what I want via File> export > media and then choosing "format" : mpeg2dvd, and a "preset" of "ntsc widescreen H Q". and then specify 1.2 pixel aspect ratio. This creates an.M2V file (which I can't find ). How can I burn a dvd from this?
If I try to burn a dvd in Encore, it disregards the above info and all it lets me do is burn a 4x3 dvd which distorts (squishes) my" widescreen" 1920x1080 footage which is not attractive.

--Bill, I thought I was exporting in SD from Pr by choosing the "mpeg2 dvd" format which uses 720x480
-- I found the .m2v file.but there is also an audio file and an .xmp file. do I open all of them in encore? How would anyone know to do that ?
-- the hd2sd software looks interesting but a lot of work. Is the video significantly sharper with this method?

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

There is no proper substitute for iDVD.
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

Can not burn or read dvd/cd's on imac g4 flat panel

Hello
Just recently I am having a great deal of trouble burning dvd's or cd's. If I manage to get a dvd or cd to burn(which is very rare that I do manage to get them to burn) they will no longer mount on my computer after I have ejected them from the computer. I get the same result wether using toast or the Disk Utility. My local Apple reseller sugested the drive was ok but had a coruption in the software. So I did a full and complete wipe of the system and freshly re-installed teh whole system. I am still getting the same problem.
The error messages I'm getting are "medium error xxxxx" or can not calibrate lazer level.
I have cleaned the dvd drive and I have made sure all disks are clean before using.
So any help would be appreciated.

check out the screen I get when I hold command at startup, what does this mean? none of the keyboard buttons respond to this or the mouse, except the return key which brings me back to the grey screen hanging forever.
iMac g4 flat panel Mac OS X (10.4.6)

DVD Drive woes! Burns but can't read!

GRRRR! This just started. I can burn blank DVDs in my drive (NEC ND-3550A - 1 yr. old), but when I put the burned DVD right back in, it's not recognized!!!!
I have made sure the finder preference and system preferences are right. The DVD drive shows up under the profiler. Permissions have been repaired. Using same media I have been using all along (without any problems).
I have tried other DVD videos & Data DVDs that I have burned on this machine (which used to work) - but now they don't.
Commercial DVD's & burned CDs WORK fine!
But the DVD Laser Lens Cleaner DVD- (that used to work) DOESN'T WORK anymore either.
Every DVD that I put in the drive, pops up a message that the DVD is blank. The DVD player app. does NOT open.
The DVD's that I tried work fine on my Powerbook.
Ideas? Suggestions?

Hi-
I assume that you have restarted the machine since this problem started?
Might be time to reinstall your OS? That is, assuming it reads the install DVD/CD......
Archive and Install may be enough to patch things up- or, try updating to 10.3.9 (your profile says 10.3.8)
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

How do I burn a CD or DVD that can be opened on a Windows PC?

How do I burn a CD or DVD that can be opened on a Windows PC?
Here's what we tried - and none of this worked when we tried the CD and DVD at our local library on their Dell, Compaq and IBM PCs.
1. We have 11 documents composed in Word (2004) in .rtf format with many, many photos embedded. The documents are in a folder.
We first created a disk image of the folder using Disk Utility: File> Create image from folder. Once we had the .dmg which was about 1.16 GB we burned this onto a DVD choosing no compression and no encryption. This DVD worked fine on the MBP but it wasn't even recognized by any of the PCs at the library.
2A. We tried to compress the folder to burn it onto a CD. In DU, by choosing compression with no encryption we reduced it to about 530MB. For some unknown reason when we tried to burn this onto a CD using DU, we got the message that the CD didn't have enough space. It is a 700MB CD so that made no sense - does anyone know why this would occur?
2B. So, we went to the Finder to use its burn option. We were able to put the 530MB compressed folder which we created in DU onto a CD using the Finder. Again, this worked fine on the Mac. At the library this CD was recognized by the PCs, but Word couldn't open it. Once we got a message that it was too large to be opened (bigger than 32MB!) - the librarian did not recognize this as a default that they might have set. Mostly, we got the message that Windows could not open the document.
What should we have done? What should we do to achieve this? I know there must be a way.
Mrs H

K Shaffer wrote:
The .zip file created by File> Create Archive in the Finder menu bar, would suffice;
but if traveling as far as India, you could consider taking along a USB flash memory
dongle with the file(s) on there as backup to the one you put on a DVD or CD media.
Thanks for the extra info, K.
This sounds like a good idea, but the CD is a gift for a friend in India and presenting him with a flash drive just won't be the same. (Although I suppose we could take the drive with us and burn something there - but that's too risky if it fails on the ground and besides, what we'd have on the drive would be Mac created, unless you have an idea on how to get around that - DU DVD/CD master? convert?)
{Little space is gained by putting a .dmg file inside a .zip file; I've checked with some
of mine and often it isn't really a deal maker to add a step in this process.}
The original folder as a dmg was 1.16GB too big for a CD. As a compressed file done in DU it was about 530MB and as a zip it is 450 or thereabouts. The files are on the MBP and I am on the G4 now and it is not turned on.
The fairly easy to use application the link takes you to, has almost no learning curve.
It will not compress an item, but you can easily; to include putting items in folders and
then use Create Archive to make them one package...
The Burn 2.3 utility makes Mac+PC compatible disc recordings, in DVD and CD media.
The simple interface is why it is handy. Otherwise, one could probably get by with the
other methods which are native to the Mac; through other steps...
I'm not sure what I am gaining at this point in time by doing this - if you both think archive (zip) and burn from finder will work.
This does sound like something we can definitely use in the future, thanks.
Mrs H

I can't burn any DVD or CD - burning process interrupts before it ends

Hi everybody !
Sorry for my bad english, but I assume you're all aware about the frenches are not very good at english.
I've got the following problem: I can't burn any dvd or cd. I've already tried with different programs such as Sonic, Nero 7.0, and I Tunes, and I got every time a mistake wich interrupted the burning process before it ends.
So I don't know what to day ! I've already tried to re install the drivers, but it's didtn't change anything.
In order to help you, I've saved an error log from nero. I hope it could be helpfull to someone who could help me !
Here is the log:
moi
5C82001080000000000666822849
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MAT****A DVD-RAM UJ-841S>Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAT****A DVD-RAM UJ-841S >Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MAT****A DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MAT****A DVD-RAM UJ-841S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2045MB (2095084kB)
Free physical memory: 1277MB (1308144kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2006
CD-ROM (ISO)
21:04:46 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:04:47 #2 Text 0 File Burncd.cpp, Line 3007
MAT****A DVD-RAM UJ-841S
SmoothLink activs
21:04:47 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
21:04:47 #4 Text 0 File Reader.cpp, Line 124
Reader running
21:04:47 #5 Text 0 File Writer.cpp, Line 113
Writer D: MAT****A DVD-RAM UJ-841S running
21:04:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:04:47 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media
21:04:48 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 318786 ( 70:52.36)
21:04:48 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
21:04:48 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MAT****A DVD-RAM UJ-841S
21:04:48 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:04:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318787 (318787) = #318787/70:50.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAT****A DVD-RAM UJ-841S]
21:04:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: MAT****A DVD-RAM UJ-841S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 653182976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318787 | lead-out | 1 | 0x41 | 0x00
21:04:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1126
Removed 2 run-out blocks from end of track 1. Length: 318787 -> 318785.
21:04:48 #15 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:04:48 #16 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
21:04:49 #17 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
21:04:49 #18 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
21:04:49 #19 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 24x (3 600 Ko/s)
21:04:49 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:04:49 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:10:08 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:10:10 #23 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 24x (3 600 Ko/s)
21:10:11 #24 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 24x (3 600 Ko/s)
21:10:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:10:11 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:12:16 #27 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 76 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 01 74 5D 0A 00 13 00 00 10
Buffer x03390000: Len x10000
0x72 F1 87 E5 D3 3D 4A 96 F9 B0 73 83 D3 14 72 A1
0xF3 49 6E 93 44 25 04 6D E5 CE 44 5F 3E C6 79 47
0xDD DD EA 3A FD 71 4D 32 CB 35 F3 DF 4B 18 BD 7D
21:12:16 #28 CDR -1040 File Writer.cpp, Line 302
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:12:17 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:12:17 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: MAT****A DVD-RAM UJ-841S
21:12:17 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
21:12:17 #33 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #34 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 13 00 00 10
21:12:30 #35 CDR -1040 File WriterStatus.cpp, Line 249
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:30 #36 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #37 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
21:12:30 #38 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #39 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 AA 00 00 30 05
21:12:30 #40 CDR -1046 File WriterStatus.cpp, Line 249
Illegal disc
D: MAT****A DVD-RAM UJ-841S
21:12:30 #41 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #42 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 24x (3 600 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 11:03:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So, thanks to you !
See you !
Romain

Hi
The error log doesnt provide any very useful information.
According to this error log the simulation was running correct but the burning process was not started.
In such case its very hard to say why it happens. Possibly the drive is damage and cannot calibrate the lens properly or you use not compatible medias.
The burning process depands also on the fiels and data which youwant to burn.
Some data, CD, DVDs are encrypted and its not possible to burn and to copy it.
In other case you could also try to burn the medias with lower speed and not with 24x.
But in worth case you the drive has a malfunction and you have to replace it ;(

DVD-RW can't burn

Similar Messages

Maybe you are looking for