How to display confirm message in APEX pl/sql process

I have a pl/sql process that selects success messages from a database table. These messages need to be displayed to the user and confirmed (only one button, to acknowledge/dismiss the mssage) along the way.
Is there a way to do this within the process? I see lots of examples in the Forum of doing this in javascript (which I know very little about) but suspect there must be a simple way to do this in my pl/sql process.
Help?
Thanks,
Carol

Hi Carol,
You can put you success messages inside page items or application items (when pages are rendered or processed...).
Then using :
1) javascript can display these values
2) rendering the page can display these values
Hope this help
Louis-Guillaume
Homepage : http://www.insum.ca
InSum Solutions' blog : http://insum-apex.blogspot.com

Similar Messages

How to display confirmation message in SPItemEventReceivers

Is there a way to display confirmation message in ItemAdding event?
I would like to display confirmation message and based on user input proceed with the other steps.
public override void ItemAdding(SPItemEventProperties properties)
// Display confirmation message
if(OKClicked)
// Do something
else
// Cancel Operation
Thanks in advance,
dhijit

http://sharepoint.stackexchange.com/questions/32055/creating-event-handler-feature-ondeleting
http://social.technet.microsoft.com/Forums/lync/en-US/39115b48-873b-462e-aa16-a7f7ce5c91d8/sharepoint-2013-online-office-365-list-item-added-event-receiver-how-to-sow-confirmation-message?forum=sharepointdevelopment
http://social.msdn.microsoft.com/forums/sharepoint/en-US/2941f80e-37c9-4b83-a41c-a9cc712d2e18/display-message-from-itemadded-event-receiver
http://sharepoint.stackexchange.com/questions/65858/confirmation-message-as-a-popup-for-itemupdating-in-event-receivers
http://stackoverflow.com/questions/11999312/popup-alert-message-using-event-receiver-in-sharepoint-2010

How to Display Confirmation message when data is stored in DB ?

Hello.
I am persisting user entered data to database table. But I want to display custom message like "Stored successfully" or "Not Stored".
I am using following approach in my controller and AM impl
in PFR:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
am.invokeMethod("insertDataToDeviceDetailsTable") ;
in AM Impl :
public void insertDataToDeviceDetailsTable(){
getDBTransaction().commit();
//delegating control to Device Details Page
How to do it ? and also what is the best way to show messages in this scenario. As in some pages a dialogue box appears and the page become inactive.
waiting for reply..
Regards,
Ajay

Hi,
You can pint message after am.invoke method:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
am.invokeMethod("insertDataToDeviceDetailsTable") ;
throw new OAException("Stored successfully", OAException.INFORMATION);
in AM Impl :
public void insertDataToDeviceDetailsTable(){
getDBTransaction().commit();
--Sushant

How to display Error Message in APEX from Database Stored Procedure

Hello,
Using APEX version 3.2
DB version 9.2.0.8.0
Internet Explorer version 6
I have an After Submit Page Process that calls a stored procedure. In the exception section I'm using dbms_output.putline to display an error message, but the error message is not displayed in APEX. How can I have the error message generated from the stored procedure display in APEX?
Thanks so much.

Hi Apex_Noob,
I created On Load - Before Header process that uses apex_application.g_notification := :P3_ROLE;I'm sorry but I'm not sure what you mean by "instead of using dbms_output.putline use :P1_ITEM"
I have the following code in my stored procedure
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Role does not exist');Thanks.

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
                        MODE c_n
                        MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
    MOVE v_pernr TO i_bdcerror2-pernr.
    MOVE c_infotype TO i_bdcerror2-infty.
    MOVE 'Error' TO i_bdcerror2-msgtype.
<b>    SELECT SINGLE text
      INTO v_msgtxt
      FROM t100
      WHERE sprsl = i_error2-msgspra
      AND arbgb = i_error2-msgid
      AND msgnr = i_error2-msgnr.
    MOVE v_msgtxt TO i_bdcerror2-msgtxt.</b>
    APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
         'INFOTYPE',
         'MESSAGE TYPE',
         'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
    WRITE: / i_bdcerror-pernr,
           13 i_bdcerror-infty,
           22 i_bdcerror-msgtype,
           35 <b>i_bdcerror-msgtxt</b>.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, <b>MESSAGE_TEXT_BUILD</b> and pass the following values from <b>BDCMSGCOLL</b> or the internal table where you collect the messages.
   i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
   v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display a message dialog box

I need to know how to display a message box from my application.
Anyone can help me?
Thanks in advance

Dear Zennen,
Use JOptionPane.
Ex
JOptionPane.showMessageDialog(this,"message","title",JOptionPane.INFORMATION_MESSAGE); Thanks
Joey

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the Message Pool Messages in CE 7.2

Hi Experts,
Please let me know how to display the Message Pool Messages in CE 7.2.
I have tried with reportContextAttributeMessage, but it is deprecated in CE 7.2.
Please do the needful.Its Urgent.
Thanks & Regards,
SatheshKumar R

Hi Sathesh,
Do the following steps:
1.) After creating a component, under it you will see Message Pools. Double click and open it.
2).Click "Add Message" and add a new message. (Give a message key, type of message (either warning, error etc ) and message text).
3). Save the metadata.
4). Raise this message where all you want by using following code(For example, on click of a button) :
      IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
      msgnr.reportMessage(IMessage<component name>.<message>,null,true);
For example, I have a component name TestAppComp and under message pool I have message called message1, then use lik this:
        IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
        msgnr.reportMessage(IMessageTestAppComp.MESSAGE1,null,true);
Reply me if you any doubt.
Regards,
Jithin

How to display Success Message on the Left side of Screen

I am displaying a Process Success Message after the ApplyMRU process, *#MRU_COUNT# row(s) updated*. By default, this message is displayed at the center of the screen. I would like to display this message at the left hand side of the screen.
I am using APEX 4.0; Theme Sand - 10. I have tried changing the alignment for the success message position in the Page Template – One Level Tabs, HTML Body section. But I am not having any luck.
Does anyone know how to change/override the default position for the success message?
Thanks

Andy,
I tried what you suggested and the success message is still being displayed in the center of the page.
I went to Template --> Page --> One Level Tabs. In the Header, I put the following lines before the </head>
<style type="text/css">
.t10messages {text-align:left;}
</style>
</head>
<body #ONLOAD#>
#FORM_OPEN#
I do not have any other custom CSS. Just strictly using Theme 10 - Sand
Any ideas on what else could be the reason?
Thanks,
DP
Sorry for the delayed response - out for holidays.

How to display special characters in APEX Classic Report column

Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21

876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
<span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to display a message box in a UIX JSP page?

I've a UIX JSP Application with BC4J developed with JDeveloper RC.
The problem is that when the user mistakes in the insertion/updating, I'd like to help him displaying a message box or a modal dialog window.
In particular, I've the following code:
<%@ page errorPage="errorpage.jsp" contentType="text/html;charset=WINDOWS-1252"%>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui" prefix="uix" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui/bc4j" prefix="bc4juix" %>
<%@ page import="oracle.jbo.JboException" %>
<%@ page import="CdssPackage.*" %>
<%-- Define Application Module and DataSource--%>
<%-- Define Application Module and DataSource--%>
<jbo:ApplicationModule configname="CdssPackage.CdssPackageModule.CdssPackageModuleLocal" id="app1" username="scott" password="tiger" releasemode="Stateful" />
<%
//Check the mandatory fields are not null
if ((cod_comm.compareTo("")==0) || (nome_ruolo.compareTo("")==0)){
throw new JboException(Errors.ERR_REQUIRED_FIELD);
//Now, the errorpage.jsp is displayed, while I'd like to display a message box or a modal dialog window
%>
How can I do it?
Thanks in advance.

Michele-
You can use javascript to send a message window in the http protocol.
Hope this helps,
Lynn
Java Tools Team

How to display a message after button press ?

Hi,
I created a jspx page with a button.
When that button is pressed, a lot of stuff is going to happen in my backing bean.
This can take up to 30 seconds. (soap call etc ... )
Meanwhile, the pressed button stays greyed out. When the action is finished, the button
is available again.
I want to display a message saying the action was succesfull or not, after that button is available again.
Can anyone help me how I can make this ?
Greetz.

Why not opening a popup from your backing bean?
Add a popup to your page:
<af:popup id="yourID" bindings="#{yourBean.popup}">
</af:popup>Open this in your backing bean:
    public void OpenPopup(String popupID) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
      service.addScript(facesContext,"AdfPage.PAGE.findComponent('"+this.getPopup().getClientId(facesContext) + "').show();");
    }This way you can add anything you want in your popup. forms, messages, images,...

How to display confirm message in APEX pl/sql process

Similar Messages

Maybe you are looking for