Dvd to web stream

I need to take half an hour footage off a dvd and onto a 160 x 120 web stream. What is the quickest way i can do this??
At the moment it is taking far to long as i have a load of these to do. I am using ripper software to get it off dvd, then into final cut, where i boost up the volume and save it as a 160 x 120 uncompressed movie. then convert it for web streaming... surely there is a quicker easier option as is taking hours

What format are you streaming?
I wouldn't bother creating an uncompressed 160X120 file. Its always best to compress from the highest possible quality video. Just get it into FCP in DV res like you seem to be doing and make any edits or adjustments you need to make. If you're just going to QT or MPEG, use Export as QT Conversion and do your resize/compression there. You can also export from your timeline to Real Media with their free plugin, or WMV using Flip4Mac or Sorenson Squeeze.
I work for a group that does alot of streaming media. I know this is sacrilegious to say here, but if I'm going to RM or WMV as I often am, I often dump my edit to tape and encode in real time on a Windows box with RM or WMV encoders instead of processing frame by frame on the Mac.
Doug

Similar Messages

Can anyone help me with compressions for web streaming? So lost!

Hi there
I am so confused !
I have the task of getting HD footage from my camcorder ready for quality web-streaming on a website. The clips need to be in mp4 format using the H264 codec. As we are dealing with HD footage, I want the viewer to be very happy with the picture quality. I must admit that most of my compression settings were kind of guess work and I was only judging my results by the final file size in relation to the video quality. I was getting file sizes of about 16mb per minute of video/ audio footage.
I had been keeping my frame size at 1280x720 and my bit rates were about 2000-2500kbits/s. Bandwidth is a real concern as there will be alot of people streaming these videos and there might be over a hundred videos on offer at any one time. I found that bit rates any less than this were resulting in a poor picture quality.
I have since learnt that what I was doing is completely wrong!
I was told that my frame size was way too big for normal web-streaming of HD footage and also that my bit rate was too high and bandwidth hungry. I never knew that the bit rates I set when compressing my videos would have an effect on the bandwidth that would be used. I am obviously showing my ignorance!
If anyone has anytime to help out someone who has no idea, I would absolutely love to know the answers to these questions:
1. What is considered a good acceptable frame size to show HD quality footage? Maybe a size that if the quality is OK, they can also stretch the frame afterwards to fill their screen without losing too much quality?
2. I want to use mp4 with the H264 codec for streaming, what is an efficient bit rate to set the compression at, so that the quality looks nice, but wont drain my bandwidth unnecessarily?
3. Can anyone explain how the bit rates that I set for my compressions affect the way they are downloaded once they are on a website. Just cant get my head around this logic for some reason?
4. What other compression settings should I be aware of (eg. keyframes etc)
I feel so lost in all of this and would appreciate it tremendously if anyone can help me out.
Dan

If I select a bit rate of say 2500 to compress my videos at, what will that now mean for the end user? Will that mean that his connection will be forced to download that video at 2500kbp/s thus using alot more bandwidth?
Yes and no. If the end user has a connection that allows them to receive data at 2500 and the source from the web can supply data at that speed then they'll be able to stream in real time. However, if either end doesn't hold up (the client's connection can't receive data that fast or the source can't send it) then end users will be forced to watch it on delay - letting a good portion of the movie download first. QuickTime will do this anyway - if you (as I do) embed a movie into a webpage, when you visit that page QuickTime will calculate how fast data is being sent and received, and decide when to start the movie based on that calculation.
I was told that the bit rate I set when I compress these files locally on my machine, tell the streaming software how to allow users to download them - is that true or have I got all mixed up?
You keep saying streaming and I'm not sure exactly what you mean. Streaming can either mean having a finished file on the web that people can watch with minimal downloading in advance, or streaming can mean sending a live event out over the web. I think you mean the first. In that case, there is no streaming software on the server side - it's just a file that gets sent to a client just like any other file. The bitrate however does tell the client software, like QuickTime player when to start playing the movie (As I alluded to above).
If you really want to "stream" content - in other words allow people to go to page and start watching then I'm going to suggest you distribute in multiple formats. QuickTime has a number of presets you can use for "streaming", and these are usually small (320*240 or 640*480) videos that are under 1 Mbps (often less than 500 kbps). These files can normally be watched in real time by most clients.
The other catch with the route you're going is that some computers simply can't handle 720p content that is encoded in h.264 - they just don't have the power. If you look at podcasters many of them have chosen to go multiple formats in part for this reason - they have video embedded on their websites for watching in real time, small iPod formats for lower-power computers and iPods, and HD formats for platforms like the Apple TV that offer the best quality.

After upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer or even off my iTunes library

after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.

Hi, i had the same problem and tried this,
Somehow iTunes is tied to Safari. Try this:
Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
or this,
Disable Wi-Fi Networking Services
Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
Please let me know if it works.

I want to monitor a web stream but it drops out. How can I refresh the web site automatically?

I work for a radio station that uses a web stream for sports broadcast at various times. My problem is the stream will stop and I have to make a manual refresh to get it going again. I understand there is a way to cause the browser to refresh at a set time I can choose. (such as once ever 60 minutes) I did see this working on one computer but it will not work on the computer I want to use for broadcast. I don't know if it is the version of FireFox I'm using or what? I need help!
Don Linkous

This is an about:config option for auto-refreshing. (http://browsers.about.com/od/allaboutwebbrowsers/a/accessibility_blockautorefresh.htm)
Also try [browser. feedview. timerInterval] & [browser. feedview. reloadInterval]

How do I create a web streaming app using digital publishing suite?

Hello, and thank you in advance. I'm looking for tutorials and guides on how to create a web streaming version of an app using digital publishing suite. Can anyone point me in the right direction.

Please tell us what you mean by "web streaming." Are you referring to a version of the content that can be viewed in a web browser?

Cannot access web-streaming site

Windows 7 Home Premium 64-bit/SP1 OS...cannot access ANY cahnnels on "FreedoCast" web-streaming site (http://www.freedocast.com)...despite having latest Flash installed (version 11,6,602,180 installed). Probably not a browser issue as this occurs on IE9, Firefox 19 & Safari 5--of which is a screenshot attached--as you can see No Video--just a Black Screen & No Audio--Basically the same display on all 3 browsers---COULD this be a "Flash" issue or more likely the actual site (http://www.freedocast.com)--or perhaps something ELSE, I might not be familiar with??

Hi,
You can check the port you bind for the website in IIS and make sure you have created endpoint with the correct port. You can also install Telnet client on your local computer and run "telnet xxx.cloudapp.net public_port_in_endpoint" at the command
prompt to see it works.
Have you enable SSL on the website hosted on Azure VM? If yes, please also create an endpoint with port 443 and open that port in Windows Firewall on the VM.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Exporting for Web Streaming...

Hello - what are the best specs to export a file for Web Streaming? My client gave me the specs of 640x320, and it's too stretched. Also, would it be in Sorenson? MPEG-4? Something else? Thanks so much!

But H.264, good to know that that's the 'standard' setting for Web Streaming... ,
There are no standards for Web streaming. None. H.264 is a convenient place to start but only because Flash will see it and Microsoft's latest products sometimes do.
Streaming is often confused with but can be wildly different from unicast, multicast, download, and live viewing.
bogiesan

HD or SD Camera for web streaming application

Looking to buy a couple of cameras (and FCE) purely for creating video for web streaming.
Given the video will be highly compressed for streaming, is there any benefit in going HD over SD?
With thanks
Bob

CosmoPod downloads the original file format (which can be retained), then converts to either MPEG4 or H264 (Best or Better). The file conversion is dependent on your Preference settings.
For functional purposes, CosmoPod places a Tool Icon on your Toolbar. Plus, the download/preference panel can be accessed via the Window menu. Videos can be directed to a Download location, or directly to iTunes.
Whether or not a file can be downloaded depends on file accessibility permissions on the provider's end. Trial version gives you 5 days/10 videos, which ought to give you a sense of whether it serves your purposes.

Exporting HDV footage to web streaming

I'm trying to Export HDV footage to web streaming format but it always ends up stretched to fit the streaming format. any suggestions

i'm with andy. i've been shooting hdv1080i60 for the past few months for web distribution, but a bunch of the sites/video players that i use don't support 16:9, and if i uploaded the video like that, it would get all stretched. my workaround has been to export>QT movie after i'm done editing, and then make a new 4:3 sequence and drop the previously exported quicktime file in it, and then export>using QT conversion at 320x240 with my normal web settings. it makes the video "letterboxed" but it plays undistorted when uploaded to youtube, google video, etc.
-gardy

Built-in support for web streaming camera?

Hi,
I have a Sony MiniDV camcorder that supports web streaming.
Is there any built-in software support for web streaming?
If not, could someone please recommend software that will allow me to setup my camera in my house and view the streamed data over the internet?
Thanks!!
BT

You can download Quicktime broadcaster for free to do this. See http://www.apple.com/quicktime/broadcaster/
We've used it to stream a live event from an art gallery and then to a Quicktime Streaming Server (available free in the Darwin version) to broadcast to the world.
Dave
PowerBok G4 1.25G RAM, 1GHz Mac OS X (10.4.5)

Reccomended format for best quaility web streaming

Hi,
I am in the process of having a new website designed and would like to hear a little feedback on what fcp users feel is the best web streaming codec, in terms of preserving color saturation and tone as well as picture quality? Is h.264 without a dooubt the way to go? Are there other better or equally good options. At this point at least file size is not important, am more interested to hear from others regarding their experience. Thanks very much.

I don't think the OP is the web designer. I don't have flash but I need to provide clients and their web people flash files. I don't think you want to entrust the web designers with the compression for at least a couple of reasons. If you can do it, they can't charge you for doing it and it's really easy to zap a flash file to them while uploading a large uncompressed file is a hassle if it's even possible and fedexing can add a delay (this is the voice of experience speaking_).

Can I watch a DVD which I am playing on my computer's DVD drive (not streaming through iTunes or Netflix) on my TV set with Apple TV?

Can I watch a DVD which I am playing on my computer's DVD drive (not streaming through iTunes or Netflix) on my TV set with Apple TV?

I have a macbook pro and a Imac with these I can use the air play option to send the video to the apple tv, i use all the time, not sure how to do it if you are using a pc thow.

Mms web streams?

I've been trying to log onto a radio web stream and it won't connect either through Real Player or Windows Media (I'm using the most recent downloads). One dialog box I get says Mac OS X does not recognize mms. type stream. Why not? Do I need an upgrade or plug in? Help?

Do you think there's a plot out there to shut apple/mac users out of the MS universe?
There is a plot by Microsoft to get web developers to use their tools which have proprietary technologies and extensions which make something work fine in Microsoft's own Windows but not on other platforms. This might be a good marketing strategy, but it is not a good strategy for a standards-based Internet.
Rather than going after Microsoft, the web developers need to be made to realize they are locking out potential customers and users by not coding to standards. I have seen two reactions from developers. One is "let's fix it" and the other is "I don't care - get a pc".
In your particular case, however, part of the problem is that Microsoft has not upgraded its own Windows Media Player to have the same capabilities as the most recent two versions for Windows.

Exporting to burn onto a DVD or to stream

what are the best exporting options if i want to burn on a dvd, and what are the best options if i want to stream it on a website? i am trying to export a 35 minute movie and i keep having quality problems.

For the DVD:
Export as Qucktime Movie. That is the one that keeps the quality of your Sequence Setting. You have the option of making it self-contained (creates a large file that can remain independent of your project) or not self-contained (creates a smaller file that references your project) ... this latter one works just spiffy. Also use this export setting to export chapter markers if so desired.
This Qucktime movie will work in DVD Studio Pro (you have the option of exporting it thru Compressor later), iDVD or Roxio Toast. Do not use Quicktime Conversion settings for a DVD
As for web settings: Not really my area of my expertise but I think if your end users have updated Quicktime viewers H.264 is very high quality (tho really slow export) and if not, maybe Sorenson or MPEG4. Others more web savvy than I will chirp in, no doubt

Adding Web Streaming Video to a Slide

'Don't know if I'm asking this correctly... Does anyone know or is there a way to add a live webpage that has streaming video? -So then when I play my slideshow the webpage shows the streaming video, gets updated each time I hit that particular slide.
If not, any suggestions?

The only streaming that Keynote directly supports is QuickTime streaming. This is when you have a QuickTime Streaming Server set up to stream to any Player that opens the reference movie. To see an example of this, view one of Apple's QuickTime streams and save the file (you can only do this if you have QuickTime Pro). Drop that file into Keynote and, when you get to the slide, the stream will briefly buffer and then begin to play.
What you want to do can't be done with Keynote as it's Web capabilities are limited (possibly due to security concerns). That's why when you click on a link, it opens Safari which handles all of the interactive web viewing. You ARE correct in that it only updates when you close your slideshow and reopen it.
And yeah, there is such thing as a "False" video stream. Because streaming requires hardware/software/server configurations many users may not have available to them, QuickTime movies can be made to progressively download AS they are playing, giving the appearance of streaming and near-instant watching of streaming, but not actually streaming.

Dvd to web stream

Similar Messages

Maybe you are looking for