DVMC Saving Potential for table COEP
Hello All,
i am curious to know the answer for the below interesting topic.
We have implemented the Solution Manager DVMC tool for few production systems. After we setup the query and BPM to analyze the saving potential calculation for the few of the table as per the DVM Sizes growth below question applies.
The Saving potential for table COEP, MSEG (for system like 4.7 systems) says to do the deletion potential. For example, the table last analysis 146.149,000 and out of that the deletion potential = 146.093,987
So based on the saving potential, we want to make a strategy looking at the deletion potential operational possibilities. However, looking at the SAP standard best practice documentation, we see the table like MSEG and COES u201Cdeletion cannot be usedu201D which is quite contradictory towards the report result in the DVMC report for saving potential.
I believe, there should be some reason, the Table analysis says about the deletion potential for these tables. I must curious to know the reason for the same.
Can anybody also explain how we can use the DVMC report either for Saving Potential or archiving potential in the operational activity? Like after we find the result, according to deletion potential, which records to be deleted etc.
Regards,
Shashi
Edited by: Shashi Samal on Feb 29, 2012 5:45 PM
Edited by: Shashi Samal on Feb 29, 2012 5:45 PM
Hello Shashi,
I wouldn't delete any table even if DVMC recommends so. I don't know your DB vendor but most of them (like DB2) offers table compression for saving spaces.
regards, Javier
Similar Messages
-
DVMC Saving Potential for table COEP, MSEG
Hello Experts,
I must curious to know the answer for the below interesting question.
We have implemented the Solution Manager DVMC tool for few production systems. After we setup the query and BPM to analyze the saving potential calculation for the few of the table as per the DVM Sizes growth below question applies.
The Saving potential for table COEP, MSEG (for system like 4.7 systems) says to do the deletion potential. For example, the table last analysis 146.149,000 and out of that the deletion potential = 146.093,987
So based on the saving potential, we want to make a strategy looking at the deletion potential operational possibilities. However, looking at the SAP standard best practice documentation, we see the table like MSEG and COES u201Cdeletion cannot be usedu201D which is quite contradictory towards the report result in the DVMC report for saving potential.
I believe, there should be some reason, the Table analysis says about the deletion potential for these tables. I must curious to know the reason for the same.
Can anybody also explain how we can use the DVMC report either for Saving Potential or archiving potential in the operational activity? Like after we find the result, according to deletion potential, which records to be deleted etc.
Regards,
ShashiHello Shashi,
I wouldn't delete any table even if DVMC recommends so. I don't know your DB vendor but most of them (like DB2) offers table compression for saving spaces.
regards, Javier -
In which transactions do i get the data for tables COEP
Hello;
I am trying to retrive some archived data from this table. I need to know which transactions correspond to this table. thx
SumantaCOBK (doc head) & COEP (line items)
Transaction S_ALR_87005050 - IMG Activity: SIMG_ORK3_COEP_SM30
Transaction KAID - Delete ALE-COEP(L) Line Items
Transaction TJ01 - Journal of transactions -
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB -
Hi,
I would like to retrive the data from the table COEP ,based on KOKRS,BELNR fields.
I need the output for Cost centre, cost element, wbs element,net work ,activity.
These values are storing OBJNR ,OBJNAR_1,OBJNR_2,OBJNR_N3.
But here always these field are not giving the correct values.
for example : for one record COST CENTRE vlaue is storing in OBJNR_1 field,
for one record COST CENTRE vlaue is storing in OBJNR_2 field,
for one record COST CENTRE vlaue is storing in OBJNR_3 field.
Here SAP has used a generic approach for this.
How can I dispaly the values in this case ?
Thanks and Regards
Srinivas.NHi,
I am asking, how can we say OBJNR_1 value alwyas belongs to cost center ?
USPOB is not filling always. -
Error while saving to ekpo table
sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct this.
Regards,
Srinivasa Murthyfor japaness yen there is no decimal places in the amount field sap as stanadrd save with two decimal places. so during display u will see the amount without decimal which is correct value but in backend sap saves with 2 decimals.
so there is no error in sap. it is sap stanadrd process of saving data.
for eg the percentage value for condition records is saved by multiplied by 10 . -
Problem with Fetching Million Records from Table COEP into an Internal Tabl
Hi Everyone ! Hope things are going well.
Table : COEP has 6 million records.
I am trying to get records based on certain criteria, that is, there are atleast 5 conditions in the WHERE clause.
I've noticed it takes about 15 minutes to populate the internal table. How can i improve the performance to less than a minute for a fetch of 500 records from a database set of 6 million?
Regards,
Owais...The first obvious sugession would be to use the proper indexes. I had a similar Issue with COVP which is a join of COEP and COBK. I got substanstial performance improvement by adding "where LEDNR EQ '00'" in the where clause.
Here is my select:
SELECT kokrs
belnr
buzei
ebeln
ebelp
wkgbtr
refbn
bukrs
gjahr
FROM covp CLIENT SPECIFIED
INTO TABLE i_coep
FOR ALL ENTRIES IN i_objnr
WHERE mandt EQ sy-mandt
AND lednr EQ '00'
AND objnr = i_objnr-objnr
AND kokrs = c_conarea. -
Hi, all transactions codes are saved in which table?some transaction codes?
hi,
all transactions codes are saved in which table?i want some transaction codes?All transaction codes are stored in table TSTC. Their texts are displayed in TSTCT.
Here are some T-CODE's..
OSS1 SAP Online Service System
OY19 Compare Tables
S001 ABAP Development Workbench
S002 System Administration.
SA38 Execute a program.
SCAT Computer Aided Test Tool
SCU0 Compare Tables
SE01 Old Transport & Corrections screen
SE09 Workbench Organizer
SE10 Customizing Organizer
SE10 Customizing organizer requests for user (To release for transport enter user name, press Enter. Select changed object and select ReleaseSE10 New Transport & Correction screen
SE11 ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE11 ABAP/4 Dictionary.
SE12 Dictionary: Initial Screen enter object name
SE13 Access tables in ABAP/4 Dictionary.
SE14 ABAP/4 Dictionary: Database Utility.
SE14 Utilities for Dictionary Tables
SE15 ABAP/4 Repository Information System
SE15 ABAP/4 Repository Information System.
SE16 Data Browser
SE16 Data Browser: Initial Screen.
SE16 Display table contents
SE17 General Table Display
SE30 ABAP/4 Runtime Analysis
SE30 ABAP/4 Runtime Analysis: Initial Screen.
SE30 Run Time Analysis (press Tips and Tricks button for good stuff)
SE32 ABAP/4 Text Element Maintenance
SE35 ABAP/4 Dialog Modules
SE36 ABAP/4: Logical Databases
SE37 ABAP/4 Function Library.
SE37 ABAP/4 Function Modules
SE38 ABAP Editor
SE38 ABAP/4 Editor.
SE38 ABAP/4 Program Development
SE39 Splitscreen Editor: Program Compare
SE41 Menu Painter
SE43 Maintain Area Menu
SE51 Screen Painter
SE51 Screen Painter: Initial Screen.
SE54 Generate View Maintenance Module
SE61 R/3 Documentation
SE62 Industry utilities
SE63 Translate Short/Long Text.
SE63 Translation
SE64 Terminology
SE65 R/3 documents. Short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68 Translation Administration
SE71 SAPscript layout set
SE71 SAPscript Layouts Create/Change
SE72 SAPscript styles
SE73 SAPscript font maintenance (revised)
SE74 SAPscript format conversion
SE75 SAPscript Settings
SE76 SAPscript Translation Layout Sets
SE77 SAPscript Translation Styles
SE80 ABAP/4 Development Workbench
SE80 Repository Browser: Initial Screen.
SE81 SAP Application Hierarchy
SE82 Customer Application Hierarchy
SE84 ABAP/4 Repository Information System
SE85 ABAP/4 Dictionary Information System
SE86 ABAP/4 Repository Information System
SE87 Data Modeler Information System
SE88 Development Coordination Info System
SE91 Maintain Messages
SE92 Maintain system log messages
SE93 Maintain Transaction Codes
SE93 Maintain Transaction.
SEU Object Browser
SHD0 Transaction variant maintenance
SM04 Overview of Users (cancel/delete sessions)
SM04 Overview of Users.
SM12 Deletion of lock entries (in the event you have you are locked out).
SM12 Lock table entries (unlock locked tables)
SM21 View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30 Maintain Table Views.
SM31 Table Maintenance
SM32 Table maintenance
SM35 View Batch Input Sessions
SM37 View background jobs
SM50 Process Overview.
SM51 Delete jobs from system (BDC)
SM62 Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN Display the menu path to get to a transaction
SMOD/CMOD Transactions for processing/editing/activating new customer enhancements.
SNRO Object browser for number range maintenance.
SPRO Start SAP IMG (Implementation Guide).
SQ00 ABAP/4 Query: Start Queries
SQ01 ABAP/4 Query: Maintain Queries
SQ02 ABAP/4 Query: Maintain Funct. Areas
SQ03 ABAP/4 Query: Maintain User Groups
SQ07 ABAP/4 Query: Language Comparison
ST05 Trace SQL Database Requests.
SU53 Display Authorization Values for User.
Human Resources
PA03 Change Payroll control record
PA20 Display PA Infotypes
PA30 Create/Change PA Infotypes
PP02 Quick Entry for PD object creation
PU00 Delete PA infotypes for an employee. Will not be able to delete an infotype if there is cluster data assigned to the employee.
Sales and Distribution (SD)
OLSD Config for SD. Use Tools-Data Transfer-Conditions to setup SAP supplied BDC to load pricing data
VA01 Create Sales/Returns Order Initial Screen
VB21 Transaction for Volume Lease Purchases (done as a sales deal)
VK15 Transaction used to enter multiple sales conditions (most will be entered here)
VL02 Deliveries
SAP Office
SO00 send a note through SAP, can be sent to Internet, X400, etc
Financial Accounting (FI)
FGRP Report Writer screen
FM12 View blocked documents by user
FST2 Insert language specific name for G/L account.
FST3 Display G/L account name.
KEA0 Maintain operating concern.
KEKE Activate CO-PA.
KEKK Assign operating concern.
KL04 Delete activity type.
KS04 Delete a cost centre.
KSH2 Change cost centre group delete.
OBR2 Deletion program for customers, vendors, G/L accounts.
OKC5 Cost element/cost element group deletion.
OKE1 Delete transaction data.
OKE2 Delete a profit centre.
OKI1 Determine Activity Number: Activity Types (Assignment of material number/service to activity type)
OMZ1 Definition of partner roles.
OMZ2 Language dependent key reassignment for partner roles.
Material Management (MM)
MM06 Flag material for deletion.
OLMS materials management configuration menu, most of the stuff under this menu is not under the implementation guide
MM configuration transactions
OLMB Inventory management/Physical Inventory
OLMD MM Consumption-Based Planning
OLME MM Purchasing
OLML Warehouse Management
OLMR Invoice Verification
OLMS Material Master data
OLMW MM Valuation/Account Assignment
Configuration related
OLE OLE demo transaction
OLI0 C Plant Maintenance Master Data
OLI1 Set Up INVCO for Material Movements
OLI8 Set Up SIS for Deliveries
OLIA C Maintenance Processing
OLIP C Plant Maintenance Planning
OLIQ New set-up of QM info system
OLIX Set Up Copying/Deleting of Versions
OLIY Set Up Deletion of SIS/Inter.Storage
OLIZ Stat Set Up INVCO: Invoice Verify
OLM2 Customizing: Volume-Based Rebates
OLMB C RM-MAT Inventory Management Menu
OLMD C RM-MAT MRP Menu
OLME C MM Menu: Purchasing
OLML C MM Menu for Warehouse Management
OLMR C RM-MAT Menu: Invoice Verification
OLMS C RM-MAT Master Data Menu
OLMW C RM-MAT Valuation/Acct. Asset. Menu
OLPA SOP Configuration
OLPE Sales order value
OLPF SPRO Start SAP IMG (Implementation Guide).
OLPK Customizing for capacity planning
OLPR Project System Options
OLPS Customizing Basic Data
OLPV Customizing: Std. Value Calculation
OLQB C QM QM in Procurement
OLQI Analysis OLVD C SD Shipping Menu
OLVF C SD Billing Menu
OLQM Customizing QM Quality Notifications
OLQS C QM Menu Basic Data
OLQW C QM Inspection Management
OLQZ Quality Certificates
OLS1 Customizing for Rebates
OLSD Customizing: SD
OLVA C SD Sales Menu
OLVS C SD Menu for Master Data
Regards,
Pavan -
Adobe Forms - Table control data Saved in Database table through Web Dynpro
Hello Friends,
I Am facing a Problem in Adobe Forms through Web Dynpro.
i Want to Make Interactive online Adobe Forms - In Table Control user enter the multiple entry in the table control and after that Click on SAVE button , entry will saved in Database table.
Please guide me.
Thanks in advance.
Gaurav.Hi Gaurabh,
For interactive form you have to check the property DisplayType = native and PdfSource should be a Context Attribute of type 'Xstring'.
For data retrieval, create a NODE and have all the required attributes within that node of AOBE form.
Fetch the data in WDDOINIT.
Also check, that the offline senario for this form is working.
Hope it helps you. -
I have a DeploymentPlanModifer subclass that is responsible for removing certain tables from a deployment plan under specific conditions. It is relatively trivial to find the
CreateElementSteps I need and subsequently remove them via
DeploymentPlanModifier.Remove(), but...
... if in my comparison I have enabled the 'Script validation for new constraints' option, the deployment plan will contain a
DeploymentScriptDomStep with a Batch containing AlterTableConstraintModificationStatements for tables with foreign key constraints. My problem starts here - there will be an orphaned
AlterTableConstraintModificationStatement for each of the tables that I removed. Obviously, execution of the generated script comes to a grinding halt when asking SQL Server to to alter a table that is never created.
I'm able to get around this by digging around in the aforementioned batches and removing the orphaned alter statements, but this seems really hacky, which makes me think I'm missing the proper way of dealing with this.
So... if anyone is aware of a more correct way of avoiding this problem, I would really appreciate finding out more about it.
Thanks in advance for any help. :-)Hi Greg. Unfortunately there is not an easy solution here. Walking the deployment model, spotting potential issues and excluding them really is what you have as an option here. The alternative is to pre-process the dacpac to have it in the form you want,
but I'm not sure if this is an option in your case and it also has limitations.
Regards,
Kevin -
Dear Gurus,
I want to ask about Object Number - OBJNR in table COEP.
As we know OBJNR is 22 digit char.
CMIIW, this object is represent: Controlling Area (digit 3-6), Cost Center (digit 7-16 )
and Activity Type (digit 17-22).
How about digit 1-2? Is this represent what?
Sorry for this question because I'm very not familiar in FI-CO.
I'm trying to create extraction to SAP BW and considering to use datasource
Thanks.
Regards,
StephHi,
digit 1-2 is used as follow:
KS: cost center
PR: WBS
OR: internal order
PA: profitability segment
KL: cost center / activity type
BP: business process
Bye
Alberto -
Field MEGBTR of R/3 Table COEP
I would appreciate if anybody could let me know of the extractor for the Field MEGBTR of R/3 Table COEP.
Thanks
ManiHi,
Robertos answer is (as always ) correct. However the extractor 0CO_OM_CCA_9 will only extract the rows from COEP where OBJNR starts with KS or KL. The coep table also contain other objecs than cost centers for example postings for internal orders. The complete list of extractors that retrieves data from COEP (based on OBJNR prefix. Would be 0CO_OM_CCA_9, 0CO_OM_WBS_6, 0CO_OM_OPA_6,0CO_OM_ABC_7, 0CO_OM_NWA_2, 0CO_OM_NAE_2,
0CO_OM_NTW_2) - See SAP note 523742 for more info on mapping between CO extractors and R/3 tables. Although even all these extractors won't give you all data from COEP. In particular CO postings for Sales Orders (OBJNR starting with VB in COEP table) will not be extracted by any of these.
So if you wan't to extract any data from COEP I think that you have to build a generic extractor (e.g if you wan't CO postings for Sales orders - objects starting with VB). See this post for details
CO Extraction for Sales Orders
Regards,
Christian -
Hi SAP Expert and Guru,
Currently I am gathering the Invoice Document Number from Project ID and below is my table flow.
Project ID/ WBS is being inserted to table PRPS-PSPHI,
Then the Object Number from PRPS-OBJNR is being captured and being used in table COEP-OBJNR to derive the value in COEP-BELNR.
Later the value in COEP-BELNR is being used in table COBK-BELNR to derive the invoice number in COBK-REFBN.
My question now is, is there any other table that we can use to replace table COEP, in order to get the Object Number OBJNR linked up with the Document Number BELNR which can be used in table COBK to derive the Invoice Number.
Kindly Advise and consult.
Thank you
Regards
Leonard TanWhy dont you try to use the OBJNR from PRPS and use it in the COFP table?
I think you should be able to get the details you are looking for.
Let us know if it helps. -
Hello all ,
We are facing poor perfromance for 0co_om_oca_9 BW delta extraction.
The delay is at the ECC source system side between following 2 steps.
10.07.2009 03:04:07 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
10.07.2009 04:16:13 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 3,095 records
While going thru notes I found that index 4 on table COEP must be active.
This index is active in my source system. But the problem is the index is at the DDIC level and not actually at the database level. I see a message "Index does not exist in database system ORACLE".
Index does not exist in database system ORACLE
Can anyone tell me if this index will actually help or I will need to create an actual index in database?If yes, how to do that?
Regards,
SanjyotHi there,
indexes are a highly DBMS dependent "thing".
One index on DBMS A might help a lot while it is just a waste of space and processing power on all other DBMSes.
The ABAP dictionary reflects this by having the option to mark indexes as specific to one database platform.
Therefore it might be that the COEP~4 index is useful for NON-Oracle-databases.
To get a clear recommendation you should open a support message to have the extractor statement analyzed.
regards,
Lars -
WARNING: No saved state for javax.swing.JTable
Hi All,
I have a JTable component in my code and I used Netbeans to add swing components. However, I get this warning after I run my app:
WARNING: No saved state for javax.swing.JTable[jTable1,0,0,329x80,alignmentX=0.0,alignmentY=0.0,border=,
flags=251658568,maximumSize=,minimumSize=,preferredSize=,autoCreateColumnsFromModel=true,
autoResizeMode=AUTO_RESIZE_SUBSEQUENT_COLUMNS,cellSelectionEnabled=false,editingColumn=-1,
editingRow=-1,gridColor=javax.swing.plaf.ColorUIResource[r=128,g=128,b=128],
preferredViewportSize=java.awt.Dimension[width=450,height=400],rowHeight=16,rowMargin=1,
rowSelectionAllowed=true,selectionBackground=javax.swing.plaf.ColorUIResource[r=51,g=153,b=255],
selectionForeground=javax.swing.plaf.ColorUIResource[r=255,g=255,b=255],showHorizontalLines=true,
showVerticalLines=true]What is the reason of this? If I need to catch this exception, how can I add it with netbeans?
Edited by: Darryl Burke -- broke a long line into several linesSet the name property of your JTable, it's a Netbeans thing, rather than a Java problem. table.setName("MyTable");Have a look at this thread for details: SessionStorage warning while program is running
Please only post Java related questions here and post Netbeans questions to a netbeans forum/mailing list, thanks.
Maybe you are looking for
-
Can I change the background on each page of the iPad?
I know how to set home screen and lock screen, but was wondering if there is a way to change the background to each page on the iPad. I am a teacher and would like each page to have a background set to a specific picture or word so my students know w
-
I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.
-
Where to find the source code examples for a carousel JavaFX
All references to the HOW-TO JavaFX lead to www.javafx.com and forwarded to the http://www.oracle.com/technetwork/java/javafx/overview/index.html, and there is no such examples. Who knows where they are
-
Cannot Connect Pavilion dv6 2020sa laptop to HDTV using HDMI cable
Hi I have tried to connect my laptop to HDTV using HDMI cable but it just comes up with a 'No Signal' message on TV, any ideas? I have done a search on internet with no joy. Operating system is Windows 7 TV is 32" LG LCD HDTV
-
Same pictures duplicated on every page folder!!!
I've just noticed that iWeb08, when publishing in a folder, is making a copy of each picture you use on each page folder, even if the picture is the same!!! For example if you're using a logo for your website, and using it on every page, it will be c