DW050 errors no matter what I do
I have tried installing my PS6 upgrade 4 times on 2 drives, including uninstalling, rebooting, and running as administrator. I still get DW050 errors on 5 components. They include PDF, mini bridge, CRT, and switchboard. What can I do to fix it? I'm about ready to give up.
I removed Photoshop CS5 and Premiere, the only programs the cleaner would recognize. I rebooted between each and afterwards. I then ran the photoshop CS6 setup as administrator. I got the same thing.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 7 error(s), 0 warning(s)
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 2 - The system cannot find the file specified.
MSI Error message:
----------- Payload: {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0 -----------
ERROR: Install MSI payload failed with error: 2 - The system cannot find the file specified.
MSI Error message:
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - PDF Settings CS6: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
I am also getting this when I try to open PS6: Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the Properties command int he Windows Explorer to unlock the file. I have no idea where this file is, and I cannot open the program to modifiy the properties of the scratch disk. I am about to give up and return Photoshop 6.
I have a 6 month old high end Windows 7 machine; PowerSpec Intel i7 cpu, 960 @ 3.20 GHz 3.19 GHz with 12 GB ram, 64-bit Operating system. There is no reason this program should not run.
Similar Messages
-
Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.
Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes
-
PubCenter shows NoAds Available error no matter what PC Location or Region settings used
pubCenter shows NoAds Available error no matter what PC Location or Region settings used
I've incorporated pubCenter SDK into my app and published it. When testing on device or in simulator, I can't get ads displayed because of the NoAds Available error. I've tested the ads using the test settings but what's the point of the SDK
if it won't display Ads from the real world?Can you see the test ads fine?
For getting test ads use the following test data
applicationId: 'd25517cb-12d4-4699-8bdc-52040c712cab', adUnitId: '10043107'
If you can see the Test ads fine, it means there is no problem with setup.
When you submit the app, after putting Live ad unit ids and application ids, be assured that your app will get Live Ads.
Refer to the following documentation if you don't see test ads:
http://msdn.microsoft.com/en-us/library/advertising-windows-walkthroughs-html5(v=msads.10).aspx
http://msdn.microsoft.com/en-us/library/advertising-windows-walkthroughs-xaml(v=msads.10).aspx -
I'm testing a simple formula in Numbers to prepare for a bigger one, but no matter what, I get a syntax error.
I like to do the following:
A2 : A11 contain the numbers 10, 20, 30, 40, 50, 60, 70, 80, 90, 100
In cell A12 I type the following formula:
=COUNTIF($A$2:$A$11,">10")
result: Syntax Error
and in all variations I tried I get this syntax Error.
I even tried to literally copy paste a formula from the helpfile:
=COUNTIF(A1:A8, ">4")
Still a Syntax Error!!
What is causing this error?Yes, I am experiencing exactly the same problem when using Formulas (I tried FORECAST, amongst others). My system is in English, but in System Preferences > International > Formats it is set to Hungarian, so it uses "," as decimal separator.
";" worked for me as well. When I changed the system to U.S. number formats, the ";" didn't work anymore.
Another thing gave me the same Syntax Error: it was a simple addition ( + ) but when I did the input of the cell references by clicking the cells in question, Numbers just interpreted the references as text (they didn't change colour from black). Writing directly the references (like A2 or B3) worked, though. It is strange because the problem doesn't seem to be consistent: sometimes it appears sometimes not. Maybe the same format thing is the reason... -
Time limit error no matter what optimization I do...
Hello Experts,
I am trying to optimize the code below since it always results in time limi error when we transport
it to production server. I have tried eliminating some select inside the loop and using for all entries
but it still gets the error. Anyway, below is the code and I hoe you can help me out on this one guys.
Thank you and take care!
LOOP AT lt_vbap ASSIGNING <wa_vbap>.
IF <wa_vbap>-auart EQ 'ZUCI' OR
<wa_vbap>-auart EQ 'ZURV' OR
<wa_vbap>-auart EQ 'ZUPR'.
Check if a delivery document has been created
CLEAR wa_vbill. "used wa_vbfa-vbeln instead of wa_vbill
*Start of modification - AVH - 04/11/07
*/ Used read table instead of fetching records from database every loop
SELECT SINGLE vbeln
FROM vbfa
INTO wa_vbill
WHERE vbelv = <wa_vbap>-vbeln
AND ( ( vbtyp_n EQ 'J' AND vbtyp_v = 'C' )
OR ( vbtyp_n EQ 'T' AND vbtyp_v = 'H' ) ).
CLEAR wa_vbfa.
READ TABLE lt_vbfa INTO wa_vbfa WITH KEY vbelv = <wa_vbap>-vbeln
vbtyp_n = 'J'
vbtyp_v = 'C'
BINARY SEARCH
TRANSPORTING vbeln.
IF sy-subrc <> 0.
READ TABLE lt_vbfa INTO wa_vbfa WITH KEY vbelv = <wa_vbap>-vbeln
vbtyp_n = 'T'
vbtyp_v = 'H'
BINARY SEARCH
TRANSPORTING vbeln.
ENDIF.
*End of modification - AVH - 04/11/07
IF sy-subrc <> 0.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ELSE.
Check if within selection parameters
CLEAR wa_likp.
*Start of modification - AVH - 04/11/07
READ TABLE lt_likp INTO wa_likp WITH KEY vbeln = wa_vbill.
READ TABLE lt_likp INTO wa_likp WITH KEY vbeln = wa_vbfa-vbeln.
*End of modification - AVH - 04/11/07
*Start of modification - AVH - 04/11/07
*/ Used wa_vbfa instead of variable wa_vbill
IF sy-subrc <> 0.
SELECT SINGLE *
FROM likp
INTO wa_likp
WHERE vbeln = wa_vbill.
SELECT SINGLE *
FROM likp
INTO wa_likp
WHERE vbeln = wa_vbfa-vbeln.
*End of modification - AVH - 04/11/07
APPEND wa_likp TO lt_likp.
ENDIF.
IF NOT wa_likp-wadat_ist IN s_erdat.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
ENDIF.
ELSE.
Check if this has already been billed
CLEAR wa_vbill. "Used wa_vbfa instead of wa_vbill
*Start of modification - AVH - 04/11/07
*/ Used read table instead of fetching records from database every loop
SELECT SINGLE vbeln
FROM vbfa
INTO wa_vbill
WHERE vbelv = <wa_vbap>-vbeln
AND ( ( vbtyp_n EQ 'M' AND vbtyp_v = 'C' )
OR ( vbtyp_n EQ 'O' AND vbtyp_v = 'H' ) ).
CLEAR wa_vbfa.
READ TABLE lt_vbfa INTO wa_vbfa WITH KEY vbelv = <wa_vbap>-vbeln
vbtyp_n = 'M'
vbtyp_v = 'C'
BINARY SEARCH
TRANSPORTING vbeln.
IF sy-subrc <> 0.
READ TABLE lt_vbfa INTO wa_vbfa WITH KEY vbelv = <wa_vbap>-vbeln
vbtyp_n = 'O'
vbtyp_v = 'H'
BINARY SEARCH
TRANSPORTING vbeln.
ENDIF.
*End of modification - AVH - 04/11/07
IF sy-subrc <> 0.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ELSE.
Check if within selection parameters
CLEAR wa_vbrk.
*Start of modification - AVH - 04/11/07
*/ Used wa_vbfa instead of variable wa_vbill.
READ TABLE lt_vbrk INTO wa_vbrk WITH KEY vbeln = wa_vbill.
READ TABLE lt_vbrk INTO wa_vbrk WITH KEY vbeln = wa_vbfa-vbeln.
IF sy-subrc <> 0.
SELECT SINGLE vbeln fkdat
FROM vbrk
INTO wa_vbrk
WHERE vbeln = wa_vbill.
APPEND wa_vbrk TO lt_vbrk.
SELECT SINGLE vbeln fkdat
FROM vbrk
INTO wa_vbrk
WHERE vbeln = wa_vbfa-vbeln.
APPEND wa_vbrk TO lt_vbrk.
ENDIF.
*End of modification
IF NOT wa_vbrk-fkdat IN s_erdat.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
ENDIF.
ENDIF.
Get Material Type and Division
IF <wa_vbap>-spart IS NOT INITIAL.
SELECT SINGLE mtart
FROM mara
INTO lv_mtart
WHERE matnr = <wa_vbap>-matnr.
ELSE.
SELECT SINGLE mtart spart
FROM mara
INTO (lv_mtart,<wa_vbap>-spart)
WHERE matnr = <wa_vbap>-matnr.
ENDIF.
If material division is same as parameter division
IF <wa_vbap>-spart = p_spart.
If material is subsidiary-owned
IF <wa_vbap>-spart in lr_spart.
If customer is the same as that of parameter division
IF <wa_vbap>-kunnr NE lr_kunnr OR <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
If item is a free good, tag order type as 'ZUPR' to treat
the item the same way as 'ZUPR'
IF <wa_vbap>-pstyv = 'TANN' OR
<wa_vbap>-pstyv = 'ZKNF' OR
<wa_vbap>-pstyv = 'ZKNN' OR
<wa_vbap>-pstyv = 'ZFLO' OR
<wa_vbap>-pstyv = 'ZKBF' OR
<wa_vbap>-pstyv = 'ZKLN' OR
<wa_vbap>-pstyv = 'ZREN'.
lv_auart = <wa_vbap>-auart.
IF lv_auart EQ 'ZUPR'.
CLEAR <wa_vbap>-pstyv.
ENDIF.
<wa_vbap>-auart = 'ZUPR'.
CLEAR: lv_mtart.
ENDIF.
Set Cost of Goods Sold Account
<wa_vbap>-cogshkont = '0050000010'.
CASE <wa_vbap>-auart.
WHEN 'ZUDO' OR 'ZUPR' OR 'ZUCI'.
IF p_rtrns EQ 'X'.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
WHEN 'ZURD'.
IF p_issue EQ 'X'.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
WHEN OTHERS.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDCASE.
CASE <wa_vbap>-auart.
WHEN 'ZUPR'.
CASE lv_mtart.
WHEN 'ZUL4'.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
WHEN OTHERS.
Check if division is defined in mapping table
READ TABLE lt_ulsub INTO wa_ulsub
WITH KEY spart = <wa_vbap>-spart.
IF sy-subrc = 0.
<wa_vbap>-kostl = wa_ulsub-kostlp.
<wa_vbap>-bukrs = wa_ulsub-bukrsp.
<wa_vbap>-type = 'TP'.
Set Cost of Goods Sold Account
IF lv_auart = 'ZUPR'.
<wa_vbap>-cogshkont = '0050000006'.
ENDIF.
ELSE.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
ENDCASE.
WHEN 'ZUCI' OR 'ZUDO' OR 'ZURD' OR 'ZUS3'.
Get cost center from header text
PERFORM get_cost_center USING <wa_vbap>-vbeln
CHANGING <wa_vbap>-kostl.
* Change by LGTE 11-02-2006
Check if Medvale sales
IF <wa_vbap>-auart EQ 'ZUCI' AND <wa_vbap>-kostl IS INITIAL.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
Check if UL Cost Center
ELSEIF <wa_vbap>-kostl NE gv_ul_kostl.
IF <wa_vbap>-kostl NE gv_ul_kostl.
* End change.
Get material division and check if subsidiary product
SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
WHERE matnr = <wa_vbap>-matnr.
READ TABLE lt_ulsub INTO wa_ulsub
WITH KEY spart = <wa_vbap>-spart.
IF sy-subrc = 0.
Get requestor's company code from cost center data
SELECT SINGLE bukrs
FROM csks
INTO <wa_vbap>-bukrs
WHERE kokrs = lc_kokrs
AND kostl = <wa_vbap>-kostl
AND datbi GE sy-datum
AND datab LE sy-datum.
IF sy-subrc = 0.
For donations, only include if a subsidiary company is donating
IF <wa_vbap>-auart EQ 'ZUDO' OR <wa_vbap>-auart EQ 'ZUS3'.
IF NOT <wa_vbap>-kunnr IN lr_kunnrnt.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
CHECK <wa_vbap>-kunnr IN lr_kunnrnt.
ENDIF.
For ZUCI, if the company code of the costcenter is UL, do not include
IF <wa_vbap>-bukrs EQ gc_ul_bukrs.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
IF <wa_vbap>-bukrs = wa_ulsub-bukrsp.
<wa_vbap>-type = 'RV'.
ELSE.
<wa_vbap>-type = 'RV'.
ENDIF.
ELSE.
Check if customer defined in table ZFI_DONATIONS
SELECT SINGLE kunnr FROM zfi_donations INTO <wa_vbap>-kostl
WHERE kunnr = <wa_vbap>-kostl.
IF sy-subrc <> 0.
lv_error = 'X'.
CONCATENATE 'Cost center/Customer' <wa_vbap>-kostl
'does not exist. Please check Sales Order'
<wa_vbap>-vbeln
INTO lt_disp-message SEPARATED BY space.
lt_disp-type = 'E'.
<wa_vbap>-del_ind = 'X'.
APPEND lt_disp.
CONTINUE.
ELSE.
<wa_vbap>-type = 'RV'.
ENDIF.
ENDIF.
ELSE.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
ELSE.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
WHEN OTHERS.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDCASE.
ELSE.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
ELSE.
<wa_vbap>-del_ind = 'X'.
CONTINUE.
ENDIF.
Get company code description
SELECT SINGLE butxt
FROM t001
INTO <wa_vbap>-butxt
WHERE bukrs = <wa_vbap>-bukrs.
IF sy-subrc <> 0.
SELECT SINGLE name1
FROM kna1
INTO <wa_vbap>-butxt
WHERE kunnr = <wa_vbap>-kostl.
ENDIF.
Change by LGTE on 11-02-2006
Get Transaction Type
CASE <wa_vbap>-auart.
WHEN 'ZUPR'. "UL Promo/Samples
IF <wa_vbap>-pstyv = 'TANN' OR
<wa_vbap>-pstyv = 'ZKNF' OR
<wa_vbap>-pstyv = 'ZKNN' OR
<wa_vbap>-pstyv = 'ZFLO' OR
<wa_vbap>-pstyv = 'ZKBF' OR
<wa_vbap>-pstyv = 'ZKLN' OR
<wa_vbap>-pstyv = 'ZREN'.
<wa_vbap>-ltext = 'Free Goods'.
ELSE.
<wa_vbap>-ltext = 'Product Samples'.
ENDIF.
WHEN 'ZUDO'. "Donations - R/3
<wa_vbap>-ltext = 'Donations - R/3'.
WHEN 'ZUCI'. "Donations - ZUCI
<wa_vbap>-ltext = 'Donations - ZUCI'.
WHEN 'ZURD' OR 'ZUS3'. "UL Returns - Donation
<wa_vbap>-ltext = 'UL Returns - Donation'.
ENDCASE.
Get cost center description
SELECT SINGLE ltext FROM cskt INTO <wa_vbap>-ltext
WHERE spras = sy-langu
AND kokrs = lc_kokrs
AND kostl = <wa_vbap>-kostl
AND datbi GE sy-datum.
End of change.
Get material description
SELECT SINGLE maktx
FROM makt
INTO <wa_vbap>-maktx
WHERE matnr = <wa_vbap>-matnr
AND spras = sy-langu.
Get division from material master
SELECT SINGLE spart FROM mara INTO <wa_vbap>-spart
WHERE matnr = <wa_vbap>-matnr.
Get division description
SELECT SINGLE vtext
FROM tspat
INTO <wa_vbap>-vtext
WHERE spras = sy-langu
AND spart = <wa_vbap>-spart.
Get Valuation Class
SELECT SINGLE bklas
FROM mbew
INTO lv_bklas
WHERE matnr = <wa_vbap>-matnr.
Determine G/L of FG Based on Valuation Class
READ TABLE lt_val_cls INTO wa_val_cls WITH TABLE KEY bklas = lv_bklas.
<wa_vbap>-fghkont = wa_val_cls-hkont.
Determine Cost Center of Cogs Account
READ TABLE lt_ulsub INTO wa_ulsub WITH TABLE KEY spart = <wa_vbap>-spart.
<wa_vbap>-cogskostl = wa_ulsub-kostlp.
ENDLOOP. "ENDLOOPHi,
Hopefully it can help you:
1. Try remove all SELECT statement within LOOP, replace with select all data before LOOP using For ALL ENTRIES.
2. Try use READ TABLE using BINARY SEARCH. Don't forget to SORT the table according your Search Key.
If it still couldn;t help, try run your report in background.
Regards, -
When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.0.80
Application Timestamp: 4e262cfr
Fault Module Name: QuickTime.qts
Fault Module Version: 7.70.80.34
Exception Code: c0000005
Exception Offset: 00146b30
OS Version 1033
Locale ID:
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information4: 0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142
-
I have had a problem on my computer with a virus and after several days running different programs to clean up my computer and once it was clean the people over on PCHF suggested I do some things to make my computer more secure. While all this was going on I upgraded firefox to the latest 3.6.12 update, and added a fire wall, (Zonealarm). I updated everything on the computer with the latest and the greatest.
I also was running a guest account on the computer as my main internet account and from what I understand the default guest account is not supported by the new zonealarm firewall so I decided to create another user account and then transfer all my user files off the guest account onto the newly created account that would have zonealarm support.
Before this time I had ie explorer and firefox both working on all three of the user accounts on the computer and after all this work I can only get firefox to work on the newest account. When I try to connect to the internet on the other two accounts I get a box that pops up, 'Run as' with several things to click and no matter what I click I get sent to an error page with an error message: An error occured while processing your request. then and error message ....Ref # 97.dzd0060.1291309687.11103569
Ie explorer will work on all 3 accounts but firefox seems like it wants to be hard to get along with. I don't think it is anything bad that is wrong, probably just a simple click of a box somewhere but I have read every thread on several forums over the past week and I can't find that box.LOLSee:
* [[Firefox is already running but is not responding]]
* http://kb.mozillazine.org/Profile_in_use -
When trying to download firefox 3.6.12.dmg to my Mac, OS 10.4, no matter what site I download it from, it will not install. There is always some error message. I'm trying to download it again now, and I know it will be the same thing again and again. Can anyone open a window for me, since the door is constantly being slamed in my face?
ThanksSame proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
My solution; very simply use timemachine to restore the previous Frefox 3.x
worked great in 3 mns -
I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
I recently bought a second-hand ipod classic. When connecting to itunes the message reads that the ipod is corrupt and needs to be restored to factory settings. However, this does not solve the issue and I get the message saying unable to restore, unknown error 1439. No matter what i have tried through apple support i get the same result. My computer runs Windows XP but I have also tried on my laptop which operates Vista and still no joy. Anyone able to solve this one?
Normally unknown error is due to timeout, cause by
connected to slow USB port at the front of the PC, or using USB Hubs - Better connect to the USB HUb at the back of the PC. (Some Laptop, has only one High Power -USB2.0 port
USB resource low, due to sharing of other USB devices - Disconnect all other USB devices when Restoring.
Winsocks conflict with iTunes - Disconnect Internet and Stop firewall and Antivirus, emails apps.
Your hardisk is dying, read this earlier post by tt2.
https://discussions.apple.com/message/17776595#17776595
This wont solve your problem. but is very helpful in troubleshooting.
It would also help, if you can state
Which version of iTunes are your running?
What is your iPod software version as shown in the iTunes summary page?
Have a nice day! -
My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?
If you are having Issues with downloading iOS 5....
Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
No matter what I get an Error PLEASE HELP
Ok I have and iPhone 4 I am trying to fix and have literally tried everything and no matter what I have tried nothing seems to work. Please help I will list thing's I've done. My iPhone is in Loop mode only when I plug it in to wall or computer or else does nothing but battery is working perfect. Got unplugged while updating now this.
-Deleted Host file apple lines, changed file lines, downloaded new host.
-Ran iReb, Tiny Umbrella, Snowbreeze, Redsnow
-Restarted my computer, deleted all Windows security forms that I can think of
-Checked to make sure everything was up to date
-Shift clicked Restore and tried restoring to 5.1.1 and then tried again with TSS server running
I have tried all these steps and no matter what I get an error. I am running windows 8 but have also tried on windows 7 my iTunes reconizes the phone and the phone goes into DFU mode and Pwned DFU mode it starts and says "Preparing to restore iphone, Checking with apple about restore and the I get an error.1. DISABLE ALL security software (firewall, antivirus, etc.) running on your PC while updating.
2. This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
No matter what I do with pacman, I get Server error
error: directive 'Server' with a value not recognized
error: config file /etc/pacman.d/mirrorlist, line 274: problem in options section
error: failed retrieving file
Comment off line 274 in the mirrorlist and the next uncommented line is the problem, no matter what I'm trying to install or remove.I'm new to arch and pacman, but I've been a linux user for years. I installed archlinux a week or two ago and I have been adding and deleting various packages with pacman with no issues until today.
I won't waste space here with the entire mirrorlist, but here is an example line where the error occurs of the line is uncommented...
#Server = http://mirrors.xmission.com/archlinux/$repo/os/$arch
and here is the /etc/pacman.conf file...
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs -
No matter what I do InDesign won't finish installing. I keep getting error 49.
No matter what I do InDesign won't finish installing. I keep getting error 49 but I can't do anything about it.
Brodier24177022 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 49.
-
No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
The Home and Sleep buttom does only promt the Connect to itunes...
Have closed down anti V and is admin and so on.....
Regards MartinHello mftoby,
Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
Thanks,
Matt M.
Maybe you are looking for
-
How large of a partition should I do for Windows XP
I am mainly using it for light gaming, the partition means how much of the hard drive is used for windows and windows-based programs/games it can use, right? What does Windows alone need, and what would you suggest? I have about 100GB total disk spac
-
Calendar from month view to day view
Hi, why isn't it possible (like on my iPhone) if I'm in the month view to tip on a specific day and see this day in the day view? I adressed this already at the Apple Feedback page but it seems to be thaat even in iOS 7.1 it has not made into the fin
-
Linking error while installing Oracle10g on Solaris 10 64bit sparc
Hi, I am getting following error while installing the Oracle 10g R2 on Solaris 10 64 bit sparc. /usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/data/Oracle/product/10.2.0 EXENAME=proc/Linking /data/Oracle/product/10.2.0/precomp/lib/proc ld: f
-
Photoshop trial keeps crashing!!!
I downloaded the trial of Photoshop. When I open it, it immediately crashes. I have uninstalled and re-installed several times. I'm running Windows 8. Any ideas?
-
Query Execution during Data Loads (extarction)
I think BI 7.0 permitts that but I would still like to confirm from Gurus. Can we/users continue to access data or execute queries while extraction is going on?? Can we load data during query execution? What are the pros and cons of doing that?? Alwa