DWS variants for hours to be reduced for a particular leave

I have a scenario wherein leave type A and leave type B have same absence grouping say 2. But hours to be reduced for absence is different for two, say its 12 hrs for A and 10 hrs for B.
Now if I assign rules for variants, it reads only 1st rule in sequence (fr absence grpng 2) and assign 12 hrs fr both leave types.
please suggest as to what can be done in this case.
If i delimit table V_554S_O (assign absence grouping) and change the abesence grouping to accomodate my requirements, will it affect the rules created for earlier work schedules, where and how this change will impact...as absence grpng will change to a new one.
pls suggest
thanks

Hi
I have tried it through counting rules, however I am facing some issues:
1) can we effect two of the absences using DWS variants only, and the one by using counting rules
2) if I define counting rules accordingly, assign the counting rule to absence type....what other steps do i need to take to effect that in the absence quota to be reduced.

Similar Messages

Imessage waiting for activation for hours

hi.. i have iphone 4, my sim card is working in my country, recieving at my Apple ID email and my phone number.. working finee
then i traveled to another country and now there is no service.. and no carrier is allowed.. donno why..
so im using my imessage which is working while roaming to my phone number and my email...
but my mistake i turned it off.. and now its waiting for activation..
im afraid that it needs my sims signal to work and recieve at my phone number..
coz until now its verifying BUT NO SERVICE.. and i reeeeeeally need my imessage..
what to doooooooo??
it has been for hours.. WAITING FOR ACTIVATION and VERIFYING my phone number.. NOTE:- no service, signal and CANT FIX IT...

Ifit has hours trying to activate the iMessage, restart your iPhone, see... Use the Home button with the Sleep button, press both at the same time and keep doing it, the screen will turn off, but you have to keep doing it until the "Apple" appears again in the screen, if that doesn't work then just turn it off and turn it on again as you should usually do it.
Good Luck

MSS Calendar View - Details of employee's request displaying 0 for hours

In MSS Calendar view when a manager views their calendar they can select the employee's time off request and the details will dispaly below. The details consist of the type, date and hours of the request. It appears that for some managers they are able to view this correct format. But for other managers when they click to get the details there will be a table format that displays with multiple rows displaying the following: Type of leave, From Date, To Date, Start, End, Absence Hours equals 0, Status displays as Informed, Used. Has anyone else encounted this issue where some managers view the correct detail format and others are viewing a table format that doesn't give the details and 0 for hours?
Thanks.

Thanks for the clarification on the text of the status. It appears that the hours are being posted and deducted from the employee's quota. After further testing yesterday we narrowed it down to either testing and implementing on a different platform or security.
Thanks for your reponse and the thread is now closed.

MRP Run for Hourly basis in MD61 Transaction

Hi All,
I want to Run MRP for Hourly basis in MD61 Transaction
If the user selects the Planning period as Hourly then in the next screen for Table Tab , 24 columns should be appear.
Please give the solution.
Thanks
Ulhas

Dear Vijesh,
according to scenario described , the correct strategy to use il strategy 40 as corretly suggest also kiran.
After create planning forecast through MD61 you can create immediately active you plan and after the system also before to run MRP planning will see the requirmenet ( Pir ) and it will work according to new sales order.
Sales order are going to reduce Planned indipendent requirement until to arrive zero quantity in MD04 (situation in with will there are only sales orders).
This information is avalible to standard SAP also in tcode MD73 but only with limited selection (qty assign)
You can use also Fm to read MRP situation in order to have a control report so that to monitorig the % of sales order and the planned indipendent requirement.
Let me know if i have been useful for you..
Daniele

Brand new Ipod Touch, tried to update, stuck in recovery for hours

I just received an iPod Touch today. I hooked it up to itunes, played around with it for a bit, with no problems, and several hours later downloaded the upgrade 2.02 from the itunes store. I followed the directions. In the process of downloading, I noticed that it seemed to be stalled on "Verifying Ipod Software" for over an hour. The screen of the ipod displays the Apple logo and the little circular icon that indicates progress beneath it (which had stopped for some time). After several hours and after searching for answers here, I figured that there must be a problem. I couldn't do anything in itunes and the only thing to stop the downloading was to force the ipod to shut off. I hated doing this, but I knew something was wrong and there was nothing else to do. I discovered that itunes was actually frozen and I had to force quit that, as well.
I started up the ipod again, and of course, it indicated that I needed to plug in the USB cord. I did and it prompted me to restore. I tried to do that and came up with the 1604 error. Tried it again, same thing. Then, when I restarted the ipod, I came up with a white screen, which was quite scary. I shut down my computer and started it back up again. I began the recovery process, which, this time, went smoothly, until I hit the "Verifying iPod Software" section. It's been over an hour and it's still on this. The progress bar isn't moving forward, it's the sort of moving stripes bar, if that makes sense. iPod screen is frozen. I'm afraid to either disconnect/quit again, or leave it. I'll have to disconnect at some point to take it to the Apple Store, but I'm afraid I'm only damaging it further.
I know these questions have been asked here, but I'm not even expecting an answer to the root of the problem (I'm used to this madness, as a frequent Apple customer). I just need to know whether it's better to quit this recovery and disconnect, or just keep leaving it. How long until I KNOW that it's not working?

Well, I figured since I had nothing to lose on the ipod (since I'd already stopped the updating once), I would just do it again, and try to restore it without the firmware upgrade. Because the ipod worked just fine with its original settings. The exact same thing happened - itunes was frozen.
So I went through the process again, only this time I followed some advice from another thread, tracked down the folder where the firmware update was stored, and trashed it. Then I tried to restore the ipod again. Well, it turns out that there's no going back to the old version. It merely downloaded the firmware update yet again. I let it go, figuring that there could have been something wrong with the first download and I'll wait and see. Now, I'm in the "Restoring Ipod Software" section. I have a feeling nothing will change. So, I'll be taking this to the Apple Store tomorrow (and raising ****).

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

Whenever i start my macbook pro the screen remains gray with the apple symbol and the circle timer below. The screen stays this way even if i leave it for hours.

When i turn on my macbook a box appears telling me i need to restart my computer (in different languages) and in order to do so i have to press on the off button for a lil while. Even after doing this the same box appears and it never restarts correctly. This box appears every single time. I rarely turn my computer off. I just place it on sleep mode and restarts it only when i get prompted to. I brought it to genius and they couldnt figure out what the problem is so i was told it needed to be shipped to get fixed. I didnt have anything backed up. All i want saved are the pictures because i went to 2 events where i was the assigned photographer and i didnt get to save it to an external memory. Genius said that when shipped i cant give instructions like make sure to save the pictures and if they are unable to, call me if they should go on with the process. I was wishful thinking that to fix the problem they might not even have to touch the pictures memory part. I brought my MBP back home hoping it will miraculously starts and id be able to back it up but now all it does when i turn it on is the screen remains gray with the apple symbol and the circle timer below. The screen stays this way even if i leave it on for hours. Please help me fix this!!! cant i really specify to the technicians at apple to please make sure not to erase the pictures? Is there no other way to turn on my mac? I only need it to work ones.

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

My mac book turns on but wont let me log on it just keeps the apple loading apple on the screen for hours so my laptop is useles how can ifix it

my laptop turns on but the apple which comes on the screen while the computer is loading stays on the screen for hours i havent been able to log into it !!!!!!!! how do i fix it

So, it is stuck at a gray screen with an Apple? Follow http://support.apple.com/kb/TS2570.

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

I created an iCloud account and also had to get more space after I have done the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help

I created an iCloud account and also had to get more space so after I have made the purchase, I am unable to backup my phone! I have a stable wifi connection at home and all I see for hours and hours is "Backing Up .. Estimating time remaining"!!!!! Plz help I'm unable to make the backup as I need to transfer all my data on my new iPhone 5S

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
In the meantime you can back up your phone to your computer by connect it, opening iTunes and going to File>Devices>Back Up. Also be sure to transfer your purchases (File>Devices>Transfer Purchases). Then set up your new phone and when given the option, choose Restore from iTunes Backup and follow the prompts to restore this backup to your new phone. This will be much faster than using iCloud anyway.

Mac Book Air shuts down completely if I close the cover and leave for hours. Message: you shut down your computer because of a problem. Any thoughts what is happening?

Mac Book Air shuts down completely if I close the cover and leave email running. Is n't it supposed to just sleep and awaken whe the cover is reopened? Instead, I have to boot it. Any idea what the problem is? I am unaware of any problem, just close the cover for safety.

Well I don't know anyone that closes the cove and leaves it for Hours... But try going to System Prefrences > Energy Saving > Uncheck Put Hard Disk to Sleep.

Discoverer report running for hours

Hi,
One of the custom discoverer report (based on custom SQL) is running for hours.
When U ran the query for the respective folder, the results were returned in few seconds.
Hence, data size is not an issue. How can I identify the cause and solve it?
Thanks,
Kamath.

Hello
If you dont need to run the report urgently then you can always schedule it to run the background till it is finished.
First log into desktop. Select tools > options > query governor tab. Make sure only radio button named "Never" is ticked. Leave all other options empty / not ticked. Click OK when ur done.
Then go to File > Manage Workbooks > Scheduling Manager > Schedule.... button then choose either My Computer or Database depending on where your report is stored. Scroll down and find your report. Enter a time and date that you want to start running the report. When you are done click Finish button. Normally the report would run for an hour or till it is complete. But it won't bomb out.
After 2 hours or even the next morning go to File > Manage workbooks > then look for your report > if it has run successfully then the status column would return something positive like "completed successfully". just double click your report and your are done....
It works for me if i need to run one of my reports. but that is only if your not in a rush to run your report
Hope it helps
Edited by: iandekoker on Jun 11, 2009 12:48 PM
Edited by: iandekoker on Jun 11, 2009 12:49 PM

I've been working on this for hours... Solaris works but mouse won't move

Edit: I should go ahead and say that I've looked at EVERY tutorial and guide and post I could find all over google, for literally hours. If you know how to fix this, I'm begging you to help me.
I have a Dell Dimension 8200, 256 MB RAM, Nvidia Geforce3 Ti 200 video card. The settings that appear when I press the "enter" button on the moniter say 640X480 with H.F.: 31.53 KHz and V.F.: 60.09 Hz.
For the keyboard and mouse:
Microsoft Wireless Multimedia Keyboard 1.1 ( Model 1014 ), Microsoft Standard Wireless Optical Mouse. Both of which wirelessly connect to the computer through the Microsoft Wireless Optical Desktop Receiver 2.1, which is simply plugged into the computer into the first USB slot.
My keyboard and mouse came from the same box, so they should both work...but only one does. Both worked on Windows XP, without installing any extra drivers, so it is not a hardware issue.
I'm using Xorg. Xsun graphics won't work for me--they come up as green and black scattered text. I ran the xorgconfig and xorg.conf was automatically placed in /etc/X11/. So, I assume that was done correctly... I chose Auto for Mouse Detection, the default mouse driver /dev/mouse/, Generic English 104-key for the keyboard, no for 3-button-emulation, no for special settings, yes for card selection ( I chose #19 Nvidia, #350 Nvidia Geforce will not work. ), #3 for Moniter selection, 640x800 for all options, and 16 bit I believe for all options.
I then rebooted, and the GUI worked fine and the keyboard worked fine. I logged in and got to the desktop, where I was prompted with some windows. The mouse pointer graphic was on the screen, but I couldn't get the mouse to work. I moved the mouse ( hardware ) back and forth repeatedly, despite my efforts the pointer simply stayed at the center of the screen.
It's almost humorous, right before I can read the keyboard shortcuts for Solaris manual while navigating the subchapters with the tab button and selecting them with the enter button( it was on the first layer of the windows that popped up so I could see it without needing to click on it ), the Solaris Registration window pops up a minute or two afterwards blocking out the other windows. I can navigate with the tab button in this window as well, yet the enter key does not have the authority to hit the buttons. My only option is to use a mouse...but wait--the mouse does not move!
SO TO THE POINT! Why won't my mouse work?!
I am completely new to UNIX based systems, so Solaris is my first one. I'm used to Windows XP, so just to let you know -- when UNIX commands are mentioned, you're speaking in gibberish to me. If I need to edit any files, please clearly explain how to do so--if I need to use a UNIX text editor etc., and what-not. Because as of now, I can only edit the files with the console.
Oh great...now this is appearing when I reboot:
WARNING - The following files in / differ from the boot archive:
/etc/path_to_inst
cannot find: /etc/devices/mdi_ib_cache: No such file or directory
The recommended action is to reboot and select "Solaris failsafe"
option from the boot menu. Then follow prompts to update the boot archive.
To continue booting at your own risk, clear the service:
# svcadm clear system/boot-archive
Jul 31 16:04:33 svc.startd[7]: svc:/system/boot-archive:default:
Method "/lib/svc/method/boot-archive" failed with exit status 95.
[ system/boot-archive:default failed fatally (see 'svcs -x' for deatails) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
What is going on?
Message was edited by:
NextExit

Okay I fixed it on my own by reconfiguring Xorg with a new mouse.
If anyone else somehow encounters this problem in the future, it seems like there isn't a driver for the Microsoft Wireless Optical mouse. If there is one, it doesn't come with the basic installation. Though, the keyboard works fine. The new mouse I got was a PS/2 Optical three-button mouse. It's pretty much your generic computer mouse.

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up!

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

DWS variants for hours to be reduced for a particular leave

Similar Messages

Maybe you are looking for