Dynamic ALV Internal table Problem

Hi all,I have successfully built an IT using method 'create_dynamic_table'.But my problems are :
1)When Iam trying to select the data with multiple tables then it is short dumping.
2)I tried to oselect the data using one table,after selecting the data if I use FM REUSE_ALV_Grid_Display then it is showing short dump with error 'type conflict when calling FM'.
I never used field symbols before.PLZ complete my program or give me suffecient feedback.Here is my program :
DATA : g_tdref TYPE REF TO data,
       g_wdref TYPE REF TO data.
DATA : dats LIKE vbbe-mbdat,
       t_fieldcat TYPE lvc_t_fcat,
       wa_fieldcat TYPE lvc_s_fcat.
FIELD-SYMBOLS : <it_dyn> TYPE STANDARD TABLE,
                <wa_dyn>,
                <dyn_field>.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_mbdat FOR dats.
SELECTION-SCREEN END OF BLOCK blk1.
wa_fieldcat-tabname = 'MSKA'.
wa_fieldcat-fieldname = 'WERKS'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'MSKA'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-seltext = 'Material Number'.
wa_fieldcat-intlen = '18'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = 'MBDAT'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = 'OMENG'.
wa_fieldcat-datatype = 'QUAN'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
DATA : d TYPE i,
       v(02) TYPE n VALUE '0',
       day(8) TYPE c.
d = s_mbdat-high - s_mbdat-low + 1.
DO d TIMES.
v = v + 1.
CONCATENATE 'Day' v INTO day.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = day.
wa_fieldcat-datatype = 'DATS'.
wa_fieldcat-seltext = day.
wa_fieldcat-intlen = '8'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
ENDDO.
*-----Building Dynamic internal table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = t_fieldcat
IMPORTING
    ep_table        = g_tdref.
ASSIGN g_tdref->* TO <it_dyn>.
CREATE DATA g_wdref LIKE LINE OF <it_dyn>.
ASSIGN g_wdref->* TO <wa_dyn>.
SELECT m~werks m~matnr v~omeng v~mbdat INTO CORRESPONDING FIELDS
OF TABLE <it_dyn> FROM mska AS m INNER JOIN vbbe AS v
ON m~posnr = v~posnr WHERE v~mbdat IN s_mbdat.

*DATA : d TYPE i,
      v(02) TYPE n VALUE '0',
      day(8) TYPE c.
*d = s_mbdat-high - s_mbdat-low + 1.
*DO d TIMES.
v = v + 1.
CONCATENATE 'Day' v INTO day.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = day.
wa_fieldcat-datatype = 'DATS'.
wa_fieldcat-seltext = day.
wa_fieldcat-intlen = '8'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
*ENDDO.
*-----Building Dynamic internal table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = t_fieldcat
IMPORTING
    ep_table        = g_tdref.
ASSIGN g_tdref->* TO <it_dyn>.
CREATE DATA g_wdref LIKE LINE OF <it_dyn>.
ASSIGN g_wdref->* TO <wa_dyn>.
SELECT OMENG FROM VBBE INTO CORRESPONDING FIELDS OF TABLE <IT_DYN> WHERE MBDAT IN S_MBDAT.
BREAK-POINT.
YOU WILL GET VALUES IN INTERNAL TABLE.
TO SOLVE YOUR ISSUE YOU SHOULD USE NUM INSTEAD OF DATS.

Similar Messages

Uploading data from excel file to a dynamically created internal table

Hi,
I have a requirement where i have to upload data from an excel file into a database table. I would be able to determine the structure of the table only at runtime based on the user input.. so i have created an internal table dynamically.
Could you please tell me if its possible to upload data from an excel file to the dynamically created internal table using any function modules?
I thought of doing this by declaring a generic internal table of one field and then uploading the *.csv file into it and then splitting it based on "," and then assigning it to the field symbol referencing the internal table.. but my file length exceeds 132 characters and i'm only able to get data of lenght 132 char's in my internal table ( generic one).
Could anyone please show me a way around this.
Thanks in advance,
Harsha

Sure, check this out.
report zrich_0002.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>,
               <dyn_field>.
data: it_fldcat type lvc_t_fcat,
      wa_it_fldcat type lvc_s_fcat.
type-pools : abap.
data: new_table type ref to data,
      new_line type ref to data.
data: iflat type table of string.
data: xflat type string.
data: irec type table of string with header line.
data: tabix type sy-tabix.
data: file type string.
selection-screen begin of block b1 with frame title text .
parameters: p_file type rlgrap-filename default 'c:Test.csv'.
parameters: p_flds type i.
selection-screen end of block b1.
start-of-selection.
* Add X number of fields to the dynamic itab cataelog
do p_flds times.
    clear wa_it_fldcat.
    wa_it_fldcat-fieldname = sy-index.
    wa_it_fldcat-datatype = 'C'.
    wa_it_fldcat-inttype = 'C'.
    wa_it_fldcat-intlen = 10.
    append wa_it_fldcat to it_fldcat .
enddo.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = it_fldcat
               importing
                  ep_table        = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
file = p_file.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = file
    changing
      data_tab                = iflat
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17.
loop at iflat into xflat.
    clear irec. refresh irec.
    split xflat at ',' into table irec.
    loop at irec.
      tabix = sy-tabix.
      assign component tabix of structure <dyn_wa> to <dyn_field>.
      <dyn_field> = irec.
    endloop.
    append <dyn_wa> to <dyn_table>.
endloop.
* Write out data from table.
loop at <dyn_table> into <dyn_wa>.
    do.
      assign component sy-index of structure <dyn_wa> to <dyn_field>.
      if sy-subrc <> 0.
        exit.
      endif.
      if sy-index = 1.
        write:/ <dyn_field>.
      else.
        write: <dyn_field>.
      endif.
    enddo.
endloop.
Regards,
Rich Heilman

Populating values in dynamically generated internal table

Hi,
We can generate internal tables dynamically and also populate them with values from database.But is there any way to populate the dynamically generated internal table(has 2-3 selected fields) with values from another internal table(has all fields required by the program) being populated within the same program?
Thanks & Regards,
Savitha

Hi
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Reward points if useful
Regards
Anji

Appending column to an dynamically created internal table

Hi folks,
i have an dynamically created internal table <dyn_tab> which is based on a parameter p_table ( containing the table name ). now i want to add one more column to this <dyn_tab> table where i can store further information in. how can i do that ?
i appreciate your help!

Hi,
Please check this sample program.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>,
               <dyn_field>.
data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
form get_structure.
data : idetails type abap_compdescr_tab,
       xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
      cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
    loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    append xfc to ifc.
endloop.
*Add your new field(s) into table ifc here.
endform.
form create_dynamic_itab.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = ifc
               importing
                  ep_table        = dy_table.
    assign dy_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,
Ferry Lianto

How to create dynamic nested internal table

Hi Experts,
Pleae tell me or give sample code, how to create dynamic nested internal table ?
I have seen threads saying creation of dynamic internal tables using some table structure only. But now the requirement is to create dynamic nested internal table.
For example the internal table contains two fields viz., one is field1 of dynamic internal table and other is normal field2 and values as shown below:
Nested internal table:
field1                     |     field2 ...
<table content1>     |     value2..
<table content1>     |     value2..
Here the [table content] should also a dynamic internal table.
Let me know if you need any other info.
regards
Saravanan R

see the complete code..i am currently working in ECC6.0 EHP4. just check which version you are using..
REPORT yst_test_000.
DATA:
      lt_comptab         TYPE cl_abap_structdescr=>component_table,
      ls_comp            LIKE LINE OF lt_comptab,
      lref_newstr        TYPE REF TO cl_abap_structdescr,
      lref_tab_type      TYPE REF TO cl_abap_tabledescr,
      lt_fcat            TYPE lvc_t_fcat,
      ls_fcat            TYPE lvc_s_fcat,
      ls_dd03p           TYPE dd03p,
      lt_data            type ref to data.
field-symbols: <fs_table> type standard table.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
    i_structure_name       = 'SCARR'
CHANGING
    ct_fieldcat            = lt_fcat
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2
    OTHERS                 = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_fcat INTO ls_fcat.
IF ls_fcat-ref_table IS NOT INITIAL.
    CLEAR ls_dd03p.
    CALL FUNCTION 'BUS_DDFIELD_GET'
      EXPORTING
        i_tabnm         = ls_fcat-ref_table
        i_fldnm         = ls_fcat-fieldname
      IMPORTING
        e_dd03p         = ls_dd03p
      EXCEPTIONS
        field_not_found = 1
        OTHERS          = 2.
    IF sy-subrc EQ 0.
      ls_comp-name = ls_fcat-fieldname.
      ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_dd03p-rollname ).
      APPEND ls_comp TO lt_comptab.
      CLEAR ls_comp.
    ENDIF.
ELSE.
    ls_comp-name = ls_fcat-fieldname.
    ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
    APPEND ls_comp TO lt_comptab.
    CLEAR ls_comp.
ENDIF.
ENDLOOP.
*Now for the Field which you want deep table then you can do like this
ls_fcat-fieldname = 'NESTED_TABLE'.
ls_fcat-inttype    = 'C'.
ls_fcat-intlen     = '000006'.
ls_fcat-rollname   = 'SFLIGHT_TAB1'. "For SFLIGHT
APPEND ls_fcat TO lt_fcat.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
lref_newstr = cl_abap_structdescr=>create( lt_comptab ).
lref_tab_type = cl_abap_tabledescr=>create( lref_newstr ).
create data lt_data type handle lref_tab_type.
assign lt_data->* to <fs_table>.
break-point.
Edited by: Vijay Babu Dudla on Apr 28, 2009 8:05 AM

Dynamic internal table problem in FM - HR_INFOTYPE_OPERATIONS

Dear All,
I have a problem when I use a Dynamic internal table in FM - HR_INFOTYPE_OPERTATION..
Please suggest me on the way to overcome this problem..
We wanted to have a dynamic Program for Info type operations which can be used for any info types as we are changing only BEGDA and the related actions
So in my program I have the parameters to accept
P_BEGDA - 01.10.2007
P_INFTY - P0008
P_ACTIO - COPY
I am able to create a dynamic table based on the parameters P_INFTY and able to read it also using the FM - HR_READ_INFOTYPE
BUT when I pass the dynamic internal table to a FM - HR_INFOTYPE_OPERTATION I am getting a DUMP
The DUMP is at the below statement from FM - HR_INFOTYPE_OPERTATION
ASSIGN record TO <record> CASTING TYPE (tabname). "XDP UniCode
It gives the below possiblities
"ASSIGN_BASE_TOO_SHORT" C
"SAPLHRMM" or "LHRMMU03"
"HR_INFOTYPE_OPERATION"
But If I use the below internal table
Data : g_t_0008 like P0008 occurs 0 with header line.
And If I use the internal table g_t_0008 instead of dynamic tables then it works. So I strongly feel it's due to not having a header in the dynamic table below see below the sample code on how I am generating a dynamic internal table
field-symbols: <dyn_table> type standard table.
data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat.
to get the srurcute
perform get_structure using l_f_table.
perform create_dynamic_itab .
assign dy_table->* to <dyn_table>.
perform get_data tables <dyn_table01>
                  using pernr-pernr p_infty.
below are the forms routine.
form get_structure using p_table.
data : idetails type abap_compdescr_tab,
       xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
clear : ifc[], dy_table.
Get the structure of the table.
ref_table_des ?=
      cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = ifc
               importing
                  ep_table        = dy_table.
endform.
*&      Form get_data
form get_data tables   p_table
               using    p_pernr
                        p_infty.
clear : p_table, p_table[].
CALL FUNCTION 'HR_READ_INFOTYPE'
       EXPORTING
            PERNR           = P_PERNR
            INFTY           = p_infty
            BEGDA           = p_datum
            ENDDA           = p_datum
       TABLES
            INFTY_TAB       = p_table
       EXCEPTIONS
            INFTY_NOT_FOUND = 1
            OTHERS          = 2.
CHECK SY-SUBRC EQ 0.
IF lines( p_table ) GT 0.
*write :/'Record exist' , 'IT', p_infty.
clear p_table.
PERFORM hr_operation tables p_table
                     using g_t_t588d-actio g_t_t588d-INFTY
                            g_t_t588d-SUBTY.
else.
PERFORM append_status using g_t_itab-pernr p_infty ' '
                            'Error' 'No records'.
ENDIF.
endform.                    " get_data
form hr_operation tables    p_table
                   using     p_actio P_INFTY P_SUBTY.
data: l_f_return    LIKE bapireturn1.
ASSIGN COMPONENT 'BEGDA' OF STRUCTURE p_table TO <l_field>.
      <l_field> = p_begda.
        CALL FUNCTION 'HR_INFOTYPE_OPERATION'
          EXPORTING
            infty         = P_infty
            number        = G_T_ITAB-PERNR
            subtype       = P_subty
            validityend   = g_f_endda
            validitybegin = P_datum
            record        = P_TABLE
            operation     = p_actio
          IMPORTING
            return        = l_f_return.
IF sy-subrc NE 0.
ENDIF.
ENDFORM.

try
using field symbol for a wrk area instead of Field symbol for a table
loop your inernal table (again a field symbol) assigning to <fs_wrkarea>
in loop call HR_INFO.._OP..
reward if helpful

Dynamic Internal Table problem

Hello all,
I have created a Dynamic ALV using RTTS classes like cl_abap_structdescr,cl_abap_tabledescr and cl_abap_datadescr.
The number of columns to be displayed is dynamic and i am able to display the same.
Now i need to perform SUBTOTAL on few of the columns.
In dynamic table how do i assign those columns as Type 'I' so that i can perform DO_SUM.
I used the method GET_I of class cl_abap_elemdescr but unable to achive the same.
Kindly suggest.
Regards,
Arun

I know when I need to create a dynamic alv I use the following (plumbing code removed).
DATA: it_field_catalog      TYPE lvc_t_fcat.
DATA: dyn_table             TYPE REF TO data.
FIELD-SYMBOLS: <dyn_table>         TYPE table.
create your alv as normal. Or auto create the entries based on the tables, whatever conditions you use to determine the structure of the table at run time.
ls_fcat-fieldname   = '???'.
ls_fcat-inttype     = '?' .
ls_fcat-outputlen   = '?' .
ls_fcat-coltext     = '?' .
ls_fcat-seltext     = '?' .
ls_fcat-f4availabl = '?'.
ls_fcat-edit        = '?'.
ls_fcat-key         = '?'.
APPEND ls_fcat TO it_field_catalog .
    CALL METHOD cl_alv_table_create=>create_dynamic_table
       EXPORTING it_fieldcatalog = it_field_catalog
       IMPORTING ep_table        = dyn_table
       EXCEPTIONS
              generate_subpool_dir_full = 1.
   ASSIGN dyn_table->* TO <dyn_table>.
This field symbol to the table can then be passed in place of the table when calling your alv and performing operations on it.

How to delete a field from a Dynamically created internal table

Hi friends,
I have got a requirement in which, I will be entering the table name and Excel file from seletion-screen.
based on the Table I have entered in the selection-screen I need to create a dynamic internal table so that I can fill that Execel data into that internal table and later i using BDC i can I can fill the database table using SM30 transaction.
here. my problem is that, When I am creating internal table dynamically, MANDT filed is also getting created in the internal table.
please, help in deleteing the filed MANDT from the internal able.
following is the code which creates the dynamic internal table.
CREATE DATA dy_table TYPE TABLE OF (p_tabname).
assign dy_table->* to <dyn_table>.
please provide, if any sample code is available.
Regards,
Xavier.P

Hi,
You can use this logic,
While creating the Dynamic filed catalog try to avoid MANDT field.
Ex:
*Dynamic creation of a structure
CREATE DATA LP_STRUCT TYPE (V_TABLE).
ASSIGN LP_STRUCT->* TO <FS>.
*Fields Structure
OF_SDESCR ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <FS> ).
LOOP AT OF_SDESCR->COMPONENTS ASSIGNING <COMPONENTS>.
*Field MANDT not displayed
    IF SY-TABIX = 1 AND <COMPONENTS>-NAME = 'MANDT'.
      CONTINUE. " Next loop
    ENDIF.
*Build Fieldcatalog
    LS_LVC_CAT-FIELDNAME = <COMPONENTS>-NAME.
    LS_LVC_CAT-REF_TABLE = V_TABLE.
    APPEND LS_LVC_CAT TO LT_LVC_CAT.
    CLEAR LS_LVC_CAT.
ENDLOOP.

Reg:doubt in dynamic generated internal table

hi everyone,
             i generated a internal table dynamically,the output is in fied symbol,i want to create a internal table using the field symbol sturture,how to create that????
plz tell me how to create a internal table referencing field symbol structure........
very urgent plz help.........
thanks in advance....
regards,
balaji.s

Hi ,
       check out   a small part of an alv report which is using dynamic internal table
data: dy_table type ref to data,
      dy_line type ref to data.
field-symbols: <dyn_table> type standard table,
               <dyn_wa> type any,
               <dyn_line> type any.
    call method cl_alv_table_create=>create_dynamic_table
      exporting
        it_fieldcatalog = ifc
      importing
        ep_table        = dy_table.
    assign dy_table->* to <dyn_table>.
CREATE A DYNAMIC WORK AREA.
    create data dy_line like line of <dyn_table>.
    sort it_mard by matnr werks.
    loop at it_mard into wa_mard.
      at new matnr.
        assign dy_line->* to <dyn_wa>.
        assign component 'MATNR' of structure <dyn_wa> to <dyn_line>.
        <dyn_line> = wa_mard-matnr.
        read table it_mard2 into wa_mard1 with key matnr = wa_mard-matnr.
        v_amount = wa_mard1-v_total * p_unit.
        call function 'SPELL_AMOUNT'
          exporting
            amount = v_amount
       currency        = 'INR'
FILLER          = ' '
        language        = sy-langu
      importing
        in_words        = v_price
      exceptions
        not_found       = 1
        too_large       = 2
        others          = 3
        if sy-subrc <> 0.
          message id sy-msgid type sy-msgty number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        endif.
        assign component 'V_TOTAL' of structure <dyn_wa> to <dyn_line>.
        <dyn_line> = wa_mard1-v_total.
        assign component 'V_PRICE' of structure <dyn_wa> to <dyn_line>.
        <dyn_line> = v_price-word.
      endat.
      concatenate 'STOCK' '-' 'IN' '-' wa_mard-werks into v_new.
      assign component v_new of structure <dyn_wa> to <dyn_line>.
      <dyn_line> = wa_mard-labst.
      at end of matnr.
        append <dyn_wa> to <dyn_table>.
        clear wa_mard.
        clear <dyn_wa>.
        unassign <dyn_line>.
        unassign <dyn_wa>.
      endat.
    endloop.
rewards points if helpful.

Search Help doesn't work with a dynamically created internal table

Hi Gurus,
I have a custom report that will display the output through edittable ALV.
My issue is, even though I've already did the FOREIGN KEY assisgnment to each fields of my custom table,
when I run my report,some fields F$ functionality aint working.
In my report, I've declared the table to be passed to ALV display dynamically as below:
*_Create dynamic internal tables for the Final INTERNAL TABLE
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog           = gt_fldcatfin
    IMPORTING
      ep_table                  = gp_fintab
    EXCEPTIONS
      generate_subpool_dir_full = 1
      OTHERS                    = 2.
    ASSIGN gp_fintab->* TO <i_xfintab>.
Where gt_fldcatfin is a modified fieldcatalog (combination of the cutom table fields and 1 column for CELLCOLOR)
Please help me with this. Thanks a lot.

This is one way.
Import photo into illustrator.
Draw box around photo, no fill ,no stroke colour and place on top of photo.
Menu - Object - Envelope Distort - Make with Warp - (warp option will appear)
Use ‘Direct Selection Tool’ (white arrow)
Select/click on anchor points to alter, you can also use the rotation tool to turn to required position.
Hope this info' is of help.

Uploading Dynamically created Internal table form Flat file

I am creating dynamic internal table as follows:
*-create dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_fldcat[]
    IMPORTING
      ep_table        = i_modify.
ASSIGN i_modify->* TO <fs_tab>.
The dymamic internal table is created with the given Ztable in the selection screen.
Now the problem is when I try to upload this table <fs_table> using function module Call function 'UPLOAD'.
The first column of flat file is getting updated in Mandt of <fs_table>.
I want to update sy-mandt in MANDT of <fs_table> and the rest of the fields with flat file data.
e.g.
Flat file data:
100 white
101 black
<fs_table> structure is getting uploaded as below
mandt zcode zdesc
100     white
101     black
if the clint is 700
it has to be uploaded as
mandt zcode zdesc
700    100     white
700    101     black
Can someone knows what should be the approach or any other function module to be used ?
Message was edited by:
        Mahesh Sahu

See the answer in your previous thread and close this thread. why do you want to have many threads for one question.

How to upload an excel to a dynamically generated internal table?

Hi,
I have an excel sheet. I have to create an internal table dynamically according to the fields of the excel sheet. The internal table i have created successfully, the fields are exactly coming as the excel sheet. I need to upload the excel sheet directly to my Internal table.
Similar to the FM GUI_UPLOAD, which directly uploads the text document into the internal table
I am not able to pass my dynamic internal table to the GUI_UPLOAD, The tables parameter in the GUI_UPLOAD is accepting only the standard tables.
How to do?
-Sudheer

Hi,
Use TEXT_CONVERT_XLS_TO_SAP Function Module.
AWARD POINTS IF USEFUL

Dynamically changing internal table in 'gui_download'

Hi Experts,
                 i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................

Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
              <dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
      lv_months TYPE i,
      lv_date TYPE sy-datum,
      p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis   = lv_date
      i_datum_von   = sy-datum
      i_kz_incl_bis = ' '
    IMPORTING
      e_monate      = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
    WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM.                    "f_fcat
*&      Form build_dyn_itab
      text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM.                    "build_dyn_itab
Thanks,
Rajesh.

Bdc upload file data into internal table problem with gui_upload fm

Hello experts,
my coding is like this ..
data : begin of itab occurs 0 .
field1 like mara-matnr,
field2......
etc,
end of itab.
data: file1 type string.
parameter :file like rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = space
field_name = 'FILE'
CHANGING
file_name = file.
START-OF-SELECTION.
FILE1 = FILE . "HERE I AM PASSING INTO STRING
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = FILE1
FILETYPE = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab. " here the data is not populating from the file , it is giving the error like speified table not found.
HERE i am getting the message like "specified table name not recgonised" . the data is not populating into the itab from the file.
file structure is same as the internal table.
I stored the file as .txt( ie in notepad).
my file is like this..
10000 200 323 sunndarrr.......
i had a problem with this bdc , i am getting like "specified table name not recgonised" in the fm gui_upload while debugging.
when i am using the ws_upload it is working fine.
please guide me where i have done the mistake.
thank you so much for all the replies.

Hi,
Have a look on the following code.
TABLES: kna1.
DATA: BEGIN OF itab1 OCCURS 0,
      str(255),
      END OF itab1.
DATA: itab2 TYPE kna1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
    filename                = 'D:\ABAP EVE\ffile1.txt'
    filetype                = 'ASC'
TABLES
    data_tab                = itab1
EXCEPTIONS
    conversion_error        = 1
    file_open_error         = 2
    file_read_error         = 3
    invalid_type            = 4
    no_batch                = 5
    unknown_error           = 6
    invalid_table_width     = 7
    gui_refuse_filetransfer = 8
    customer_error          = 9
    no_authority            = 10
    OTHERS                  = 11.
IF sy-subrc <> 0.
WRITE:/ 'sorry'.
ELSE.
LOOP AT itab1.
    SPLIT itab1-str AT ',' INTO itab2-kunnr itab2-name1.
    APPEND itab2.
ENDLOOP.
IF sy-subrc = 0.
    LOOP AT itab2.
      WRITE:/ itab2-kunnr,itab2-name1.
      INSERT INTO kna1 VALUES itab2.
    ENDLOOP.
    IF sy-subrc = 0.
      WRITE:/ 'inserted'.
    ELSE.
      WRITE:/ 'not inserted'.
    ENDIF.
ELSE.
    WRITE:/ 'fail'.
ENDIF.
ENDIF.
Flat file:
10001,Sadney
10003,Yogesh
20005,Madan
1.U need to define internal table with one field of max size
2.upload the flat file data into that internal table
3.split that internal table data into another internal table(having fields)
<REMOVED BY MODERATOR>
thanks,
Chandu
Edited by: Alvaro Tejada Galindo on Apr 30, 2008 12:17 PM

Passing values to dynamically created internal table

Hi,
I have the flat file data as
f1,f2,f3........so on
where f1 f2 and f3 are field names.
I have a variable var which contains the data
V1,0001,0002.........so on
data: var type string.
The value of field f1 is v1
The value of field f2 is 0001
The value of field f3 is 0002.......so on
FIELD-SYMBOLS:     <fs_1> TYPE STANDARD TABLE
I have dynamically created an internal table for fields f1 f2 f3 ...... using
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog           = lt_fieldcatalog
    IMPORTING
      ep_table                  = <fs_data>
    EXCEPTIONS
      generate_subpool_dir_full = 1
      OTHERS                    = 2.
IF sy-subrc <> 0.
ENDIF.
ASSIGN <fs_data>->* TO <fs_1>.
Now for <fs_1> I have to pass the corresponding values of the fields f1 f2 f3 .
How can i solve this.
Thanks and regards ,
Parvatha Reddy

Hi,
There is no data in <fs_1>.
I need to pass the data form the string var to the fields of <fs_1>..
I understand that you want to populate the internal table <fs_1>.
for that you fist need work area.. use below statement to create work area..
DATA: new_line TYPE REF TO data.
CREATE DATA new_line LIKE LINE OF <fs_1>.
ASSIGN new_line->* TO <fs_2>.
<fs_2> is not your work aread...
to assign value to each field of you work aread <fs_2>. use statement
ASSIGN COMPONENT 1 OF STRUCTURE <fs_2> TO <fs_3>.
<fs_3> = f1 .
now <fs_3> will point to the first field of work area <fs_2>, f1 is value from your string .. repeat above for each field in workarea, by increasing the component number. Once your work area is filled
append it to table.
append <fs_2> to <fs_1>
apologies if I am not getting the requiremnt correctly..

Dynamic ALV Internal table Problem

Similar Messages

Maybe you are looking for