Dynamic Assign Statement is not working in 4.6C

Hi Team,
I have done the following coding to get teh dynamic value sof a field but the assign statement is failing... Its returing the sy-subrc as 4.
LOOP AT <t_tab> INTO <s_tab>.
    LOOP AT t_flds.
      CONCATENATE '<s_tab>-' t_flds-fieldname INTO v_fldval.
      ASSIGN (v_fldval) TO <fldval>.
     endloop
   endloop.
Appericiate your suggestions.
Thnx,
Ankur..

Hi Ankur,
I am facing the same problem.........wit no solution in hand, cud u plz let me knw if u have got some solution over this.....
The problem occurs, maybe because the internal table field symbol <t_tab> (and hence <s_tab>) does not contain the fieldname for which u r tryin to get the value in <v_fldval>
Is there a way to chk if a particular fieldname exists in the <t_tab>, so tht if v dont get it, we wud avoid the ASSIGN statement, so tht v dont get a dump
Appreciate ur inputs.....
Regards,
Aparna.

Similar Messages

In human task, dynamically assign group doesn't work

Oracle SOA 11.1.1.4
My bpel process invokes a human task.
On the human task Assignment tab, I assigned 3 users (by name), 1 group (by expression).
The group is configured in LDAP
When I tested the bpel process, I entered the group and other data required.
From the worklist app, I see the task listed. It is assigned to the 3 users, but not the dynamically passed-in group.
From the Audit trail, I saw all data I entered (include the group). Everything seems correct, but I still can’t make the dynamically-pass-group work.
If I assign the group by name in human task, it works fine.
The problem is: dynamically assign group doesn't work.
Please kindly advice.

Yes, it is possible assign a group as participant of some human task, passing the group name as parameter.
I have tested just now.
It works pretty well in SOA 11.1.1.4 (BPEL or BPM).
Make sure add a data parameter in your human task definition and pass a valid group name to it.
At the Assignment tab, in the participants' list, add a group, data type by expression, and set the value to the right xpath expression to the corresponding parameter.
For example: /task:task/task:payload/task:group
If it is not working look the SOA log files, probably you'll find some information about the error there. Maybe there is some problem with your jazn.com configuration.
You can also test if there is something wrong related to the group name, trying to transfer some task to the same group by the worklist.

Insert statement will not work if select statement has less number of colum

Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshad

user13360241 wrote:
Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshadmore often than not "TEMP" tables are NOT required & are highly inefficient in Oracle.
Either only specify explicit column in TEMP to get data,
or provide value for "extra" column in TEMP

CASE Statement is not working Derived table

Hi All,
in the bello SQL Statement case statement is not working in derived table. I am new to creation of derived table if any body knows plz kinldy help me out on this.
SELECT x.market, x.droprate as med1
FROM
(select upper(market_name) as market, fulldate as date_value,
     (sum([Dy_LOT_DROPS_N][Dy_OB_HO_DROPS][Dy_NonRF_Drop]))/
          nullif(sum(CASE WHEN (month(BBHDLY.FullDate)}>= 6 and { year(BBHDLY.FullDate)} = 2011) or {fn year(IDENSLABBHDLY.FullDate)} > 2011
THEN BBHDLY.Dy_Calls - BBHDLY.Dy_HO_CHAN_ALLOC ELSE BBHDLY.Dy_Calls END),0)*100 as droprate
from BBHDLY sla
inner join Dim mkt
     on sla.bts_name = mkt.bts_name and sla.SectorID = mkt.Sector_Id
               where fulldate >= GETDATE()-46
               group by market_name, fulldate) x,
(select market_name as market, fulldate as date_value,
(sum([Dy_LOT_DROPS_N][Dy_OB_HO_DROPS][Dy_NonRF_Drop]))/
          nullif(sum(CASE WHEN ({fn month(BBHDLY.FullDate)}>= 6 and {fn year(BBHDLY.FullDate)} = 2011) or {fn year(BBHDLY.FullDate)} >
2011 THEN BBHDLY.Dy_Calls - BBHDLY.Dy_HO_CHAN_ALLOC ELSE BBHDLY.Dy_Calls END),0)*100 as droprate
from BBHDLY sla
inner join Dim mkt
     on sla.bts_name = mkt.bts_name and sla.SectorID = mkt.Sector_Id
               where fulldate >=GETDATE()-46
               group by market_name, fulldate) y
where x.market = y.market
GROUP BY x.droprate, x.market
HAVING
   SUM(CASE WHEN y.droprate <= x.droprate
      THEN 1 ELSE 0 END)>=(COUNT(*)+1)/2 AND
   SUM(CASE WHEN y.droprate >= x.droprate
      THEN 1 ELSE 0 END)>=(COUNT(*)/2)+1
Thanks

It looks like SQL Server or Sybase given that you're using getdate().
As such, Vinesh's comment to use decode is wrong - decode is Oracle syntax.
Looking at your statement again, I've noticed the following:
you have no { to match the first } - not sure why you're using them anyway.
you haven't given x.market a name - use x.market as market instead
use coalesce instead of nullif if you're on SQL Server.

Insert statement is not working for z table.

Hi experts,
My insert statement is not working.
I have used follwing code to update z table .
INSERT ztable FROM TABLE gt_table.
here i have checked gt_table and its filled up with all the records properly.
now the problem is in this table i have 15 fields and it inserts 14 fields of it but
the last field is never inserted though in gt_table i can see value for last fields also.
I have added this field in ztable recently . so i also used se14 to adjust table but still i am facing same problem.
please help me out.
thanks,
Neo

> > Table maintainance will have nothing to do with
> this
> > issue.
>
> It does sometimes when you are trying to see the
> values from SM30 instead of SE16. The value may be
> there, but it may just not seen in SM30 because the
> table maintenance hasn't registered the addition of
> new field.
>
> Another place to look at is the activation log to see
> if there are any warnings issued there.
You shouldn't use SM30 to view table entries. You use this transaction to maintain the table entries. Pure and Simple.

Delete Statement is not working correctly

Hello,
The following delete statement is not working correctly.
If I press delete it will delete everything in the category table
I don't know whats wrong with it.
----delete row from category if there is not infrastructure to support------
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;
Thanks
Mary

Hi,
IF :P12_DFCY_SEQNO4 IS NOT NULL AND :P12_DFCY_CATG_C = '7' THEN
DELETE FROM DFCY_CATG
WHERE NOT EXISTS(SELECT I.DFCY_SEQNO
FROM DFCY_CATG C, DFCY_CATG_INFRSTRCTR I
WHERE C.DFCY_SEQNO = I.DFCY_SEQNO
AND :P12_DFCY_SEQNO4 = I.DFCY_SEQNO);
end if;So, if P12_DFCY_SEQNO4 does not exist, then I would expect all records to be deleted because the NOT EXISTS() function would just return TRUE for every record on the table. Somewhere in the statement, I would expect to see something that links between the table being deleted from and the NOT EXISTS() data or, perhaps, using the P12_DFCY_CATG_C value as a filter?
Andy

Delete statement is not working.

Hi,
find the code. Here the delete statement is not working and i am getting sy-subrc = 4. although ,
xe1edp10-idnkd = 34596 and dint_edidd -sdata = 34596.
please help me ...
loop at dekek_x.
loop at dint_edidd where segnam = 'E1EDP10'.
if dekek_x-stpin = 1 .
CLEAR xe1edp10.
MOVE dint_edidd-sdata TO xe1edp10.
delete dint_edidd where sdata = xe1edp10-idnkd.
endif.
endloop.

1st thing..
i tried this :
tables: edidd, e1edp10.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
move edidd-sdata to e1edp10.
IF edidd-sdata = e1edp10-idnkd.
WRITE: e1edp10-idnkd.
else.
WRITE: 'nothing'.
ENDIF.
output
>315934 EA 017
>315934 EA 017
2nd thing,.
your loop inside loop doesnt make any sense as they are not related any where.
3rd thing:
the fields are not type compatible.. this might be the reason for wrong delete statement..
and 1 more clarification:
TABLES: edidd, e1edp10.
DATA :it TYPE TABLE OF edidd WITH HEADER LINE.
edidd-sdata = '315934 EA 017'.
WRITE edidd-sdata.
APPEND edidd TO it.
edidd-sdata = '315934 EA 018'.
APPEND edidd TO it.
LOOP AT it." where segnam = 'E1EDP10'.
CLEAR e1edp10.
MOVE it-sdata TO e1edp10.
DELETE it WHERE sdata = e1edp10-idnkd.
ENDLOOP.
in this also delete is working perfectly fine... you run and check..

SORT statement is not working!

Hi frdz,
Below SORT statement is not working. Can any one explain me why this is happening.
SORT i_bseg ASCENDING BY belnr bukrs
                    DESCENDING kunnr.
I have table content as below.
BELNR      BUKRS KUNNR
0016000000|CROP |
0016000000|CROP |0008910168
Before and after the sort content order is same.
I want to sort the content like below.
0016000000|CROP |0008910168
0016000000|CROP |
Is there any thing wrong with the sort statement???
i_bseg is defined as TYPE STANDARD TABLE OF
Sort criteria must not change i. e ascending by belnr and bukrs and descending by kunnr.
Thanks,
Vinod.

hi vinod,
this is because on your statement, you are sorting BUKRS in descending order and KUNNR in ASCENDING order.
please take note that the sort order should come after the sorted field. if no order is given, the default which is ASCENDING will be used.
do your sorting like this
SORT i_bseg BY belnr bukrs kunnr DESCENDING.
regards,
Peter

Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Dynamic Selection on report not working

Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
Nas

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

SELECT statement does not work if characters ## are contained in field

Hi Experts,
I have the following statement:
select single field1
    from table1
    into var1
    where field2 = text.
This is a very simple statement that is working for me almost always correct. However there is a situation where the system is not able to find the record in my table. If text is equal to JAN##2011 the system won't deliver a result even if I have an entry in table1 with exactly this value.
TABLE1
field1 field2
rome JAN##2011
paris JAN2011
only if text is JAN2011 the select will find a result.
all fields are defined as CHAR.
Thanks in advanced

Hi Alberto,
probably ## is not ## :-).
is the visible representation used by ABAP to show any non-displayable characters as control characters like TAB, CR, LF, FF and the like.
In debugger you can switch to HEX display of values, if you see something like 0A0D you can find this using CL_ABAP_CHAR_UTILITIES constant attributes.
Regards
Clemens

IRR dynamic action filter does not work when condition set.

Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MO

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

Dynamic Action on item not working in APEX 4.2.1

Created Dynamic action on item(Radio based on LOV) to show/ hide other items (event is Change). But its not working. I mean nothing happening onchange ..

Based on the Radio item value "a" (Y/N) i am showing or hiding items b and c. All these items are in same region.
Output seen : By default all the items are displayed and no action on changing the value of the radio item a.

Assigned To column not working in the quick search of a list

Hi, I have a list where we have a column called Assigned To, but it is a single line of text column type. Search is working since I am able to find other values in the list.
Now, when using the quick search, it is not working or showing results in this column.
Could this be related that this column is a manage metadata column type as default in SharePoint?
I have created a new list with this value but, as person column type and it is not working either.
Any ideas?

Hi Javi,
Please check and make sure your custom "Managed Property" map to the crowed property generated by managed metadata column, and set the manged property as "Searchable" then start an incremental crawl or full crawl.
For "Assigned To" column(e.g. crawled property should be "ows_Assigned_x0020_To"), I enabled the "Searchable" option for the manged property, then start an incremental crawl, and then search the
user in "Find an item" and it worked, you can try.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Message statement is not working?

I would like to place a message in the following method:
It's defined like this:
Position & cannot be delimited because the position is occupied until &
This is in the program:
MESSAGE: s029(zpom_001) WITH st_hrp1001-objid(8) st_hrp1001-endda(8), display like 'E'.
I inserted the (display like 'E' ) in so I can get the RED 'X' error message. If I take out the display like 'E', it works.
I get the following error:
Three-digit error number XXX required in the "MESSAGE EXXX..." statement.
Thanks for any help you can give?
Jeff

Satish,
That did not work...
If I remove the part of the message ( Display like 'E' ) it works...... But if I want to get a RED X error message, what would I do?
JeffG

Dynamic Assign Statement is not working in 4.6C

Similar Messages

Maybe you are looking for