DYNAMIC_CALL_FAILURE - ABAP Proxy Inbound

I have the following error when I try to test a proxy interface with the data coming into ECC 5.0 System.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>ZSMDCL_MI_FUSION_PRODUCT_MAINT</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have a function module which sends a message out depeding on the return status of a BAPI. The proxy is giving the above error when it calls this function module.
reg
reg

Hi Naveen
Try to catch exception in proxy itself
Use follwing link

http://help.sap.com/saphelp_nw04/helpdata/en/a1/082589fc4246f09793039d5fb01a17/content.htm
For Catching Exception in Proxy
Inbound ABAP Proxy Trace and error handling
Handling Exceptions
ABAP Server Proxies - Fault Handling
Exception handling in integration processes
ABAP Proxy and fault messages
/people/bhanu.thirumala/blog/2006/02/07/abap-proxy--xml-to-abap-transformation
Thanks
Abhishek
***Please Reward points if helpful********

Similar Messages

ABAP proxy inbound interface

We are currently creating the ABAP proxy inbound interface program for the Update Goods Issuance (Serialized, Nonserialized), Inventory Count, and Fuel issuance.
We would like to request for your help as we are new to developing ABAP XI programs. May we request for a sample program related to ABAP proxy inbound interface.

HI Ricardo
Proxy runtime allows only one operation for an interface. Either Sync or Async
Moreover the error you have mostly occurs when you have not configured PI as IS or some other admin configurations. Check the thread given above
Check these as well
BW and XI on the same physical server
Error in IS
Thanks
Gaurav

ABAP Proxy Inbound message does not call generated method

Hi,
we tried to generate a ABAP Proxy for a customer demo. It just should retrieve some data and write them to a database table.
the generation and activation of the proxy was without errors. If we call the check function the method works fine.
But if we receive data from XI via the regarding interface it looks as if the execute-method of the generated class is not called. We can see the message in SXMB_Moni, but nothing is written to the db table.
Does someone have any idea?

Hi Peter,
There will be some error in the Proxy Side.
Check this in Transaction Code-SXMB_MONI of Application System(R/3 etc) not in the XI system.
There may be some communication(http etc) issues.
Also check this -
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
Hope this helps to findout what is the error.
Regards,
Moorthy

ABAP Proxy Inbound Error

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>DFBD3A3045C011DCACF800145ED17196</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message-Id DFBD3A3045C011DCACF800145ED17196 ist im gerufenen System bereits vorhanden (Pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi Jeong !
Check this thread:
Duplicate Message
Regards,
Matias.

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

ABAP Proxy generation descrepencies with filed and method...

Hello,
I have two question regarding ABAP Proxies.
The first one when i regenerate proxy for a interface, It is not generating the same filed as before and my ABAP program fails.
I have Internal_organization_Descri -- Now, It is not giving same field rather It is giving Internal_organization_Descr
It is missing 'i'
One more problem is It is chaging method also
Previously it was showing "Sales_order_Sync"
Now, It is showing method as EXECUTE_SYNCHRONOUS
Why It is these proxies behave differently, is there Service Pack dependency.. What is the best way to avoid these descripencies...Pls help
Srinivas

Hi,
Please find the explantion about your doubts on ABAP Proxy.
1. The field names might be changed based on the changes in XI in Data type for this field.
Whenver you will be regenerating the ABAP Proxy, it considers the Message type and internally the Data types that have created in XI. So any changes in these objects may lead to change.
Verify your field names in XI
2. The Method to be used to call ABAP proxy is EXECUTE_SYNCHRON for Synchronous communciation and EXECUTE_ASYNCHRONOUS for async communication. These methods are used in ABAP source code. So please let me know where you had find this method "Sales_order_Sync"
The EXECUTE_SYNCHRON is the proper method.
Let me know if you need any more info.
Refer
ABAP Proxy outbound program - purchase order send
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Thanks
Swarup

ABAP Proxy doesnu2019t Work

Hi all,
We have problem about ABAP Proxy (Inbound). We are using a follow scenario:
Legacy ( JDBC ) -> XI -> ABAP Proxy ( ECC Backend )
Recently The ECC Backend was updated ( only data ) , and since than the ABAP Proxys doesnu2019t work. We tested other Adapter, we used Receiver RFC Adapter, and RFC Adapter worked.
We tried a lot of thinks, we regenerated ABAP Proxys, We activated Proxys, taken Refresh Full CPA Cache, we checked SCIF, SMICM, and we couldnu2019t solved the issueu2026..
Could you help us????
Thanks!!!
Fábio Ferri
SAP Consultant XI/ABAP/Netweaver

Hello,
i think for this scenario..you have used XI adapter.
Check HTTP service number.
It should be same as in:
In SAP R3, Transaction - > SMICM : goto->services -> ..you will find HTTP service number..Use the same in XI adapter.
or
Execute transaction : SPROXY
goto-> connection test.
Regards,
Sreenivas.

Error "SLD_NO_OWN_BS" while executing ABAP Proxy Interface

Dear All,
I am working on ABAP PROXY (INBOUND) Interface in which data from FTP is getting inserted into a ztable in SAP ECC 6.0.
While executing the interface, file is getting picked from source location & following error is received in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>SB1</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while reading ID of own business system from the SLD for system SB1 and client 900</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked configurations & settings in both SAP PI & SAP ECC system as per previous sdn threads on same error but I am not been able to figure out the exact error.
Please guide me in resolving this error.
Reg,
NJ

Hi Nishu,
Have a look on these threads,,,
SLD_NO_OWN_BS error
SLD_NO_OWN_BS
Regds,
Pinangshuk.

Problem with Inbound Abap Proxy

Hi Experts,
I have an Inbound ABAP proxy scenario that insert data into a ztable. The whole process from XI to R/3 works fine, except it does not update my ztable.
The only time the ztable gets updated is when i debug it. I used this report "SPRX_TEST_INBOUND" to debug
Anyone who's had a similar problem.
Thank you in Advance,
Danny

Hi,
did you use the same XML from SXMB_MONI that gets posted during message flow?
you can check inside your inbound proxy if the values are not empty etc
and then raise an exception to see what's going on
you can also do an endless loop and get inside it to see the real values
that get passed into the proxy
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

FILE TO INBOUND ABAP PROXY - " LOOP_IN_MESSAGE_ROUTING ERROR "

Hi ,
Getting the following Error in *FILE TO INBOUND ABAP PROXY* which is updating a Database table in R/3.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">LOOP_IN_MESSAGE_ROUTING</SAP:Code>
<SAP:P1>is.01.lgscms</SAP:P1>
<SAP:P2>IS</SAP:P2>
<SAP:P3>XI</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XI protocol error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How to rectify the Error..
Regards,
Ravi

Hi Ravi !
Check if the url for the receiver is
http://<host>:<port>/sap/xi/engine?type=receiver
or
http://<host>:<port>/sap/xi/engine?type=entry
if using XI 3.0
Regards,
Matias.
Edited by: Matias Denker on Feb 25, 2008 2:12 PM

Application ERROR - Fault message Error in Inbound ABAP Proxy !!

Hi Folks,
I have got application error while doing in Inbound proxy scenario. This inbound message is ProductActivityNotification, this message has got fault message. This message is triggering for faults. How to control this fault message or how to divert this error as an alert to RWB. Please give me your ideas step by step. Error as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal20/Global">ProductActivityNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find the fault message has got following values
<?xml version="1.0" encoding="utf-8" ?>
- <n0:ProductActivityNotificationFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:RAS:/1SAI/TAS653D9A9CCD9A8EF3AF9B:701:2009/02/10">
- <standard>
<faultText>Proxy Class (Generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: ProductActivityNotification (ID )</text>
<id>000(/SCA/BIF_PROACT)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Message ID is missing</text>
<id>032(/SCA/BIF_MI)</id>
</faultDetail>
</standard>
</n0:ProductActivityNotificationFault>
Will you please focus bit light on this error message please?
Regards
San

Hi,
Check your Source data is correct or not..beofr executing your scenario execute your inboud Proxy with valid data ,
check below blog...
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
Raj

Catch an error in inbound ABAP Proxy

Hi,
I'm using an ABAP Proxy to file->PI->ECC(proxy) scenario and I found an error in my sxi_monitor on ECC side:
<SAP:Stack>Error during proxy processing An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause</SAP:Stack>
I actually solved the error, but I still don't know how to pass to the MONI the message error catching the exception instead of that "standard" error that y pasted.
How can I get the exception error and then RAISE it to the MONI?
Edited by: Marshal on Jun 9, 2009 12:37 PM

Ok, I'm talking about PI 7.1, I'm not sure if it's the same for older versions:
1 - Create a Fault Message Type (with standard error data types that PI generates automatically when you create the Fault MT) and add it to your inbound Service Interface (or Message Interface in previous PI versions).
2 - Regenerate the proxy.
3 - Now in the proxy class method related to your SI there is an exception you have to possible kind of errors to catch, the 1st one is a short dump than you can catch with a TRY. CATCH. ENDTRY structure, the 2nd one is a situation that isn't a dump but you want the proxy to return an error.
3.1 - Catch Short dump code:
DATA: lo_cx_root TYPE REF TO CX_ROOT,
 l_pi_fault_data TYPE ZPI_EXCHANGE_FAULT_DATA. "Exception message
TRY.
***********YOUR PROXY CODE
CATCH cx_root INTO lo_cx_root.
* GET ERROR TEXT
 lo_cx_root->if_message~get_longtext(
 RECEIVING result = l_pi_fault_data-fault_text ).
* GENERATE ERROR THAT YOU WILL SEE ON SXI_MONITOR (IN ECC!!)
 RAISE EXCEPTION TYPE "YOUR_EXEPCTION_MESSAGE_TYPE"
 EXPORTING standard = l_pi_fault_data.
ENDTRY.
3.2 Raise an error when you found an error situation for example an error message after BAPI calll:
 DATA: lt_return TYPE STANDARD TABLE OF bapiret2.
* Call any BAPI function....always return bapiret2 table with messages
 CALL FUNCTION 'BAPI_XXXXX'
 TABLES lt_retun.
* Look for an Error message
 READ TABLE lt_return INTO lwa_return WITH KEY type = 'E'.
 IF sy-subrc = 0.
 CALL METHOD cl_proxy_fault=>raise
 EXPORTING
 exception_class_name = 'YOUR_EXCEPTION_MESSAGE_TYPE'
 bapireturn_tab = lt_return.
 ENDIF.
I hope it helps

Inbound ABAP Proxy

Hi All,
I have an inbound ABAP proxy as the receiver. The class, interface, structure and tables are generated when I created the proxy.
I edited the method execute_asynchronous to collect the data from the table and send it to another RFC.
When I tried to populate my internal table using the data from table generated during proxy generation, it gives me an error like"zjssrc_dt-header_tab" is not defined in the ABAP dictionary as table, projection view or database view. But it doesn't give me an error while declaring my internal table of the type "zjssrc_dt-header_tab".
Any inputs on this will be of great help.
Thanks & Regards,
Jai Shankar.

Hi,
When you generate your Proxy, there will be some structures created. Here you can see the name of the table type.
Just create a work are for the same table type and one internal table.
eg.
DATA: i_data_records TYPE TABLE OF zback_dt_data_records.
DATA: wa_data_records TYPE zback_dt_data_records.
Now move the data from the proxy to your internal table
eg.
i_data_records = input-mt_val_in-data_records.
Now this value input-mt_val_in-data_records for you would be input_<MessageType>_<segmentName thats repeating>
Now loop through the Internal table and move the data to Work area and then update your table.
I have taken second weblog as eg. Just see that weblog and read this.
Regards
Vijaya
Message was edited by: vijaya kumari

INPUT Parameter of INBOUND ABAP PROXY

Hello Friends,
We have created the inbound proxy via SPROXY and we have implemented the class ZACCL_MI_VENDOR_MASTER_PROXY_I for the same. Now In the structure tab of ABAP Proxy I can see the following structure of the INPUT.
INPUT-MT_VENDOR_MASTER_PROXY -VENDOR -VENDOR_DETAIL -RECORD_TYPE.
Now in the record_type we are passing a single parameters C or N. i.e if i is N then new and if it C then change.
In my class implementation i am doing the followin check.
CASE input--MT_VENDOR_MASTER_PROXY -VENDOR -VENDOR_DETAIL -RECORD_TYPE. WHEN 'N'.
 CALL METHOD me->create_vendor
 EXPORTING
 input = input
 IMPORTING
 title = title
 it_recp = it_recp
 it_contenttext = content_text.
WHEN 'C.
 CALL METHOD me->change_vendor
 EXPORTING
 input = input
 IMPORTING
 title = title
 it_recp = it_recp
 it_contenttext = content_text.
but I am getting following error message.
input-MT_VENDOR_MASTER_PROXY-VENDOR-VENDOR_DETAIL-RECORD_TYPE is unknown.
Could you please help me on this issue.
Thanks & Regards,
Nagaraj

If one of MT_VENDOR_MASTER_PROXY,VENDOR or VENDOR_DETAIL is a table type and not a flat structure, then your statement will not work.
Suppose if VENDOR_DETAIL is a table type, then you have to access RECORD_TYPE this way.
* Create it_vendor_detail type table of <VENDor_DETAIL>...
it_vendor_detail[] = input-MT_VENDOR_MASTER_PROXY-VENDOR-VENDOR_DETAIL[].
loop at it_vendor_detail into wa_vendordetail.
case wa_vendordetail-record_type.
when 'N'....
when 'C'...
endcase.
endloop.
Regards,
Ravi

Inbound synchronous ABAP proxy in PI 7.1?

Hi All,
Can anyone provide me sample ABAP proxy code for inbound synchronous. I have created inbound synchronous service interface, generated proxy in ABAP system. It has only one method in ABAP proxy class with input and output. When I write code ti take the input, process and send an output, its not getting delivered.
Please help me with sample code or guidence on this. Looks like there are changes in 7.1 when compared with previous versions that EXECUTE_SYNCHRONOUS doesn't exist anymore.Do we just eed to write code in single method with in the class?
Regards,
N@v!n

On Sproxy - >
Focus on your interface - >
go to your inbound interface name(service interface) -> double click
On PROPERTIES TAB -> INTERFACE -> PROVIDER CLASS -> DOUBLE CLICK ON IT ->
Now One method name is coming - > Double click on it ->
Congarts ! you will write your code Here ...
I am Pasting a sample code used in my case , similarly you can compare for your self. :
__________________________________________________________ Declare Area
DATA:   IT_INPUT    TYPE ZPROCESS_ORDER_FILE_ROW_TAB2,
              WA_INPUT    TYPE ZPROCESS_ORDER_FILE_ROW2.
DATA:   IT_FINAL   TYPE ZPROCESS_ORDER_RESPONSE_RO_TAB,
              WA_FINAL   TYPE ZPROCESS_ORDER_RESPONSE_ROW.
I get this Types from
go to your inbound interface name(service interface) -> double click
USED OBJECT TAB
Here you will get 2 table type Structure for Internal table Finaland Input Both.
as well as Work area Types.
_________________ Actual Code -
IT_INPUT = INPUT-PROCESS_ORDER_FILE-ROW.
This Structure you get in
go to your inbound interface name(service interface) -> double click
USED EXTRENAL VIEW TAB.
Use ABAP NAME HERE ..
Populate IT_FINAL according to you and pass it out.
SImialry for sending Out ....
OUTPUT-PROCESS_ORDER_RESPONSE-ROW = IT_FINAL.
Hope it help...
Still Doubts , Write here ...
Regards
Prabhat Sharma.

DYNAMIC_CALL_FAILURE - ABAP Proxy Inbound

Similar Messages

Maybe you are looking for