Dynamic columns in column selector

Hi All,
I have a report with two column selector for X and Y axis . I want to change the columns in the column selector based on the value selected in the dashboard promt.
Please help me ..

Read about Presentation Variables in the Answers documentation. That should do the trick

Similar Messages

Dynamic Number of Column in a table

Hi guys,
I have a requirement that needs dynamic number of column in a tale.
It is possible to do this in Adobe forms.
Thanks,
Chirantan

Hello. It of course is possible in Adobe.
You need to write a simple script using JavaScript or FormCalc to hide or show columns according to some special value. You will work with the presence attribute of the object. E.g. MYFIELD.presence = "visible" or "hidden" or "invisible". You will need to change your subforms content to flowed.
Use these guides:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
help.adobe.com/en_US/livecycle/es/FormCalc.pdf
Hope this helps, good luck, Otto

Dynamically set number-columns-spanned

Hi all,
I have a cross tab which has a dynamic number of columns. Each column has a header "Location" (which is determined by the data), but the table also has a master header "Volume" which should span all of the locations. How can I acheive this?
I currently have:
<xsl:attribute xdofo:ctx="block" name="number-columns-spanned">2</xsl:attribute> Volumne
But this is obviously static.
Many Thanks
Andy

Hi lmd2,
Attached is a quick example of one way to do what you are asking. This is only a general example, and there may be a bettter implementation depending on the architecture of your application. The link here also has information on setting the number of sockets for a specific sequence file. Hope this helps.
Regards,
Ebele O.
National Instruments
Attachments:
ParallelModel.seq ‏455 KB

Dynamic selection of columns in report and print the output

Hi,
I tried to have dynamic selection of columns in SQL query using lexical parameter. The hitch is how to print those selected column in excel ouput ?
Suppose
I have select &col from table_name
Initial value of &col is col1 and in data layout only col1 appears
where &col was replaced with more than a column (col1,col2,col3)
now how to print the column selected at the run time,
i have coded in Before Report Trigger
:cell_val := ' <td><rw:field id:"cl1" src="col1"></rw:field></td>
<td><rw:field id:"cl2" src="col2"></rw:field></td>
<td><rw:field id:"cl3" src="col3"></rw:field></td> ' ;
and this user parameter was replaced in web source using JSP expression
<rw:getvalue id: "v_cell" src:"cell_val"></rw:getvalue>
<rw:foreach src:"g_val">
<table>
<tr>
<% =v_cell%>
</tr>
</table>
</rw:foreach>
but in the output i can see only blank columns
Regards
Suresh

The strings replaced by expression <%= v_cell %>
should print the field values contained in col1,col2,col3 columns, but nothing is printed . i think the custom tags (rw...) are not replaced by the jsp expression properly.

Dynamically Pass the Column Name cursor. || Dynamic Column Name

Hi,
I need to dynamically pass the column name based on a Mapping table in a loop ( Right now i have hardcoded stuff )just like using Execute immediate.... Inside the procedure, I have commented as where i hit the problem.
Thanks for all of your time...
Thanks
Muthu
CREATE OR REPLACE PROCEDURE xml_testing_clob AS
doc xmldom.DOMDocument;
main_node xmldom.DOMNode;
root_node xmldom.DOMNode;
user_node xmldom.DOMNode; item_node xmldom.DOMNode;
root_elmt xmldom.DOMElement;
item_elmt xmldom.DOMElement;
item_text xmldom.DOMText;
item_test xmldom.DOMText;
nodelist xmldom.DOMNodeList;
sub_variable varchar2(4000);
x varchar2(200);
y varchar2(200);
sub_var varchar2(4000);
CURSOR get_users IS
SELECT FIRST_NAME,LAST_NAME,ROWNUM FROM USER_INFO_TBL WHERE WEIN_NUMBER = '1234' ;
CURSOR get_cdisc_name IS
select CTS_COL_NAME,CDISC_NAME from CTS2CDISC_DICTIONARY where CTS_TABLE_NAME = 'USER_INFO_TBL';
BEGIN
-- get document
doc := xmldom.newDOMDocument;
doc := xmldom.NewDomDocument;
xmldom.setVersion(doc, '1.0');
xmldom.setStandalone(doc, 'no');
xmldom.setCharSet(doc, 'ISO-8859-1');
-- create root element main_node := xmldom.makeNode(doc);
root_elmt := xmldom.createElement(doc,'AdminData');
root_node := xmldom.appendChild(main_node,xmldom.makeNode(root_elmt));
FOR get_users_rec IN get_users LOOP
item_elmt := xmldom.createElement(doc,'User');
xmldom.setAttribute(item_elmt,'OID' , get_users_rec.rownum);
user_node := xmldom.appendChild(root_node,xmldom.makeNode(item_elmt));
FOR cv_get_cdisc_name IN get_cdisc_name LOOP
EXIT WHEN get_cdisc_name%NOTFOUND;
sub_var := cv_get_cdisc_name.cts_col_name;
sub_variable := 'get_users_rec.';
sub_variable := 'get_users_rec.'||cv_get_cdisc_name.cts_col_name;
x := sub_variable;
dbms_output.put_line(x); -------------- Here i just see the literal string
y := get_users_rec.FIRST_NAME;
dbms_output.put_line(y); -------------- Here i just see actual value ( data )
item_elmt := xmldom.createElement(doc,cv_get_cdisc_name.cdisc_name);
item_node := xmldom.appendChild(user_node,xmldom.makeNode(item_elmt));
item_text := xmldom.createTextNode(doc,x ); ---- This is the place i am hitting with an error .
If i use variable X then i am able to see only the literal
string in the output. BUT if i put cursor name.coulmname,
then the resumt (XML) is fine.I wanted acheive this
dynamically just like execute Immediate
item_node := xmldom.appendChild( item_node , xmldom.makeNode(item_text));
END LOOP;
END LOOP;
-- write document to file using default character set from database
xmldom.WRITETOCLOB(doc,);
xmldom.writeToFile(doc, 'c:\ash\testing_out.xml');
-- free resources
xmldom.freeDocument(doc);
END;
+++++++++++++++++++++++++++++++++++ XML OUTPUT +++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" ?>
- <AdminData>
- <User OID="1">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName> </User>
- <User OID="2">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="3">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="4">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="5">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
++++++++++++++++++++++++++++++++++++++++++++++++++++ MAPPING TABLE DETAILS +++++++++++++++++
CTS_COL_NAME     CDISC_NAME     CTS_TABLE_NAME     XML_TAG     -----------> Column Name
FIRST_NAME     FirstName     USER_INFO_TBL     Element     -----------> Records
LAST_NAME     LastName     USER_INFO_TBL     Element     -----------> Records

My scenario is little different, let me explain:
My columns will remain same but values changes (based on column formula) according to the selected prompt value
If I select 'Oct' from prompt then
Curr will contain data for 'Oct' only
Next1 will contain data for 'Nov' only
Next2 will contain data for 'Dec' only
Next3 will contain data for 'Jan' of next year only.
Later if I select 'Jul' from prompt then
Curr will contain data for 'Jul' only
Next1 will contain data for 'Aug' only
Next2 will contain data for 'Sep' only
Next3 will contain data for 'Oct' only.
I don't have different columns for each months but the columns are capable to reflect data for any month.
So, how can I reflect the column name as month name for which that contains data.
Regards,
S Anand

BI Layout/Template | Table with dynamic number of columns

hi!
i have a problem concerning the creation of a dynamic report with the BI publisher.
in my BI template i need a table with a dynamic number of columns. i have searched the
forums but havent really found a solution for this type of problem.
first of all this is A dummy-structure of my dataset:
<ROWSET>
     <ROW>
          <FIELD1>1</FIELD2>
          <FIELD2>2</FIELD2>
          <FIELD3>3</FIELD3>
          <FIELD4>4</FIELD4>
     </ROW>
     <ROW>
          <FIELD1>a</FIELD2>
          <FIELD2>b</FIELD2>
          <FIELD3>c</FIELD3>
          <FIELD4>d</FIELD4>
     </ROW>
</ROWSET>
in the report the fields represent the columns i need in the table.
the problem is, that the number of the fields vary. in this example i have 4 fields/columns
but another time i may have 6 or 10 etc..
my dataset is always different because i am loading my dataset via a http request which is
returning the needed data in XML.
is there a nativ possibility within the publisher to generate the columns dynamically?
i read about <?split-column-header:group element name?> etc. but this is only for cross-tables.
can anybody give me a hint how to approach this problem?
would be very glad for some advice.
thanks a lot in advance!

Specific answer is here
http://winrichman.blogspot.com/2008/09/dynamic-column.html
but these link let you know, how to do
http://winrichman.blogspot.com/search/label/Dynamic%20column
http://winrichman.blogspot.com/search/label/Cross-tab
http://winrichman.blogspot.com/search/label/cross%20tab

Dynamic change selected columns

hi all,
Created an anwers with 5 columns:
level1 | level2 | level3 | level4 | facts
I created a session filter on all the level columns. Like this:
level1 = session.value or
level2 = session.value or
level3 = session.value or
level4 = session.value
Now i want to dynamic change the columns depended on wich column contains the session value.
For example: level2 contains the session value. The ouput I (want to) expect:
level1 | level2 | facts
Hope someone can help with this...tnx in advanced

More information at this link:
http://oraclebizint.wordpress.com/2007/11/16/oracle-bi-ee-101332-using-indexcol-function-varying-underlying-columns-based-on-user-login/
Hope this helps
Swapan.

Dynamically Hide IR Columns

Hello,
Is it possible to dynamically hide IR columns. Here's my situation:
I have an IR report that has roughly 60 columns. However, based upon the parameters passed to the report, only about 20 - 25 columns have data in them. The remaining columns contain all Nulls. I want to display only those columns that contain data, and hide those that contain ONLY Null values.
I tried using conditional displays, using column_name is null but it hides the columns whether it contains data or not.
Has anyone else done this, or have a suggestion as to how I can dynamically hide columns based on whether the column contains data? Thanks in advance for any assistance you can provide.
Bob

One way is to create an apex item for each column that you think it may contain null in all rows.
Use that apex item in the conditional display of your related column in interactive report.
Regards,
Salim

Function returning SQL - dynamically select the column

Hi there,
[Oracle 11g],
Hi there,
I want to dynamically select the column to be displayed.
Or lets say it in an easier way regarding the EMP Table:
I got a table called teststable with value1 and value2 in it.
Value1 is EMPNO
Value 2 is DEPTNO
Now I like to have something like this:
Select (Select Value1 from testtable),(Select Value2 from testtable) from EMP This will not work. So I need a function for this. Does someone now how to get this to work? Thx in advance. Thorsten

+ 1 to the above replies.
An example to pick the column name dynamically from a table and rendering the output of EMP table as a XMLTYPE is here.Pushing it a little bit further, you can project back XML as relational rows and columns :
SQL> with testtable (value1, value2) as (
2    select 'EMPNO', 'DEPTNO' from dual
3 )
4 select x.*
5 from testtable t
6     , xmltable(
7         'for $r in fn:collection("oradb:/SCOTT/EMP")/ROW
8          return element r {
9            $r/*[local-name()=$v1]
10          , $r/*[local-name()=$v2]
11          }'
12         passing t.value1 as "v1"
13               , t.value2 as "v2"
14         columns value1 varchar2(30) path '*[1]'
15               , value2 varchar2(30) path '*[2]'
16       ) x
17 ;
VALUE1                         VALUE2
7369                           20
7499                           30
7521                           30
7566                           20
7654                           30
7698                           30
7782                           10
7839                           10
7844                           30
7900                           30
7902                           20
7934                           10
12 rows selected

How to dynamically change the column in tabular form

Hi!
Is there any way to show notice in tabular form if value entered is not in some range?
eg. I click on button add row, and then I fill out values and if one value is not within a certain range then in last column (this column is not included in table) is notice out of range or something else. I know that this can be achieved with validations but this must be just notice, not some restriction. Values I wrote must be inserted into table.
I hope you understand me. I use Apex 4.1 and 11g Oracle database.
Regards,
drama9346

Sure you can. If you edit your page attributes you have a field javascript on load. Here you can enter code that does checks or actions depending of user events. Example in the case of a tabular form:
$('input[name=f01]').live('change', function(){
if($(this).val()=='1'){
alert('value is 1');}
This will give an alert if you change the item in the first column to 1.
More about jQuery & events at
http://api.jquery.com/category/events/

How to create a table with a dynamic amount of columns

Hi, all!
Thare is a tutorial at javaFX documentation page. This example describes how to make tableView, if you have some certain java class, which can tell you which columns you are going to have. (That is a Person class in this example).
But what if i do not have any specific class, and number of columns can vary from time to time? In my case i have such data structure:
class TableData{
    List<Row> rows; //A list with all my rows i need to have in my table
class Row{
    List<Column> columns; //Cells\Columns for every row.
class Column{
    Attribute attr; //Each column - is somethig like a wrapper for the real data i need to show in a cell;
class Attribute{ //My precues data
    String name;
    SupportingInfo info;
class SupportingInfo{//Some supporting fields...
    String name;
    String value;
    //...etc....
}So, my case is very similar to [this one|http://blog.ngopal.com.np/2011/10/19/dyanmic-tableview-data-from-database/] . The only differents is that data from the case above is not binded with its representation in javaFX table (so, even if some one will make extra controls to edit this data in a tableView, the actual object with that data will never know about it.), because it(data) goes to the table like some strings, not like some objects;
So, what do i need - is to push data to the table (like that: table.setItems(tableData)), set some set Factories, to give user ability to edit data, and to have this edited data in my tableData object;
Here are some code i've tried to make for this purpose:
//prepare my table
private void createTableHeader(TableView table, List<Attribute> ias) {
    int i = 0;
    for (final Attribute ia : ias) {
        final int j = i;
        i++;
        TableColumn tc = new TableColumn(ia.getName());
        tc.setSortable(true);
        tc.setCellValueFactory(new Callback<CellDataFeatures<List<Attribute>, String>, ObservableValue<String>>() {
            @Override
            public ObservableValue<String> call(CellDataFeatures<List<Attribute>, String> arg0) {
                if(arg0.getValue().get(j).getSupportingInfo() == null){
                    arg0.getValue().get(j).setSupportingInfo(new SupportingInfo());
                return new SimpleObjectProperty(arg0.getValue().get(j),"value");
        table.getColumns().add(tc);
//loading some data to my tableView
private void createTableBody(TableView curTable, List<Row> rows) {
    ObservableList<List<Attribute>> data = FXCollections.observableArrayList();
    for (Row row : rows) {
        data.add(row.getColumns());
    curTable.setItems(data);
//this one is to define some extra controls for editing data in a table by users
private void makeCellFactory(TableColumn curTableCol, final Attribute templateIa, final Document doc) {
    curTableCol.setCellFactory(new Callback<TableColumn, TableCell>() {
        public TableCell call(TableColumn p) {
            final EditingCell cell = new EditingCell(templateIa, doc);
            return cell;
}But, as a result, i have just empty rows in my table, with an ability to click some cell and recieve table editing controls. But there is not defult values in by table; What am i doing wrong in my code?
Edited by: 929064 on 21.09.2012 2:24
Edited by: 929064 on 24.09.2012 8:26
Edited by: 929064 on 24.09.2012 8:27

I put an example up on this thread No DataGrid component? with a TableView displaying values from a non-JavaFX aware data model. It might help get you started. This example is not editable, to make your table editable you would need to update the data model directly when editing is complete.
Note that if you're building the data model from scratch, there's no need for the listener-notification to be built by hand, as I did in the example. Your data model can directly use the same JavaFX collections instances the table is using.

SSIS 2012 - Importing multiple files with different columns (where columns are stored in a table)

Hi everyone,
I have been tasked to upgrade an existing DTS package into an SSIS package.
The old package uses 3 tables.
Table 1) Has a list of file names
Table 2) Has a list of columns per file
Table 3) Is the data destination.
So what is supposed to happen is:
Step 1) the package should load the files into a resultset
Step 2) for each file in the resultset, the package should get the related columns
Step 3) the package should now map the columns to the destination table (variable column numbers here)
Step 4) the import should take place.
I have gotten to step 2 but am not sure how to dynamically map the columns to the destination table.
Any pointers anyone?
Thanks in advance!

Hi Tonyhektic,
What’s the nature of Table 2, does it only store the column names for each file? I don’t know how it is implemented in DTS package, however, in SSIS package, dynamic columns mapping is not supported. To work around this issue, we need to use Script component
to do the columns mapping. You can refer to Sorna’s script above or have a look at the following blogs:
http://munishbansal.wordpress.com/2009/06/09/dynamic-columns-mapping-%E2%80%93-script-component-as-destination-ssis/
http://blog.quasarinc.com/ssis/best-solution-to-load-dynamically-change-csv-file-in-ssis-etl-package/
Regards,
Mike Yin
TechNet Community Support

I entered new fields in a form that was created last year to update it. However, now when I view the responses, they are listed as Column 1, Column 5, etc. It doesn't show a label for the actual field when I view the responses. Can you please help?

I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

Having trouble connecting column to column using niSwitch on a PXI 2530

Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module. I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups. When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1". c0 and c1 are example columns I want to connect. Any help is appreciated.

You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
Start with using NISE, and see if you like it.
http://www.ni.com/pdf/products/us/3msw112-113.pdf
Srdan Zirojevic

Write data to Text file - Column by Column

Hi,
I want to write a table of data(2D) to a text file. I acquire 1D array(6 lakh rows) of data & want to write that in text file as column 0. And next 1D array to the same text file as column 2. Is it possible todo that?
I don't want to accumulate 2D array and write at last since it consumes more memory & Labview Hangs.
Kindly share your ideas.....
Labview 8.2
Regards,
Raja

HI,
I hope this works for you but this vi doesnt hanged my PC or Labview. Please check with it and let me know.
Regards,
Gita
Message Edited by AutoTEC on 10-17-2008 04:15 AM
Attachments:
Write column by column.vi ‏1398 KB

How to display the rows in to columns and columns into rows?

DES:- I know by using pivot and unpivot you can convert rows into columns and columns into rows but i don't know how to write the syntax?

Hi,
Besides the places Martin mentioned above, there are many examples in the forum FAQ:
https://community.oracle.com/message/9362005#9362005
For an example of both PIVOT and UNPIVOT in the same query, see
http://forums.oracle.com/forums/thread.jspa?threadID=920854&tstart=0

Dynamic columns in column selector

Similar Messages

Maybe you are looking for