How to display the rows in to columns and columns into rows?
DES:- I know by using pivot and unpivot you can convert rows into columns and columns into rows but i don't know how to write the syntax?
Hi,
Besides the places Martin mentioned above, there are many examples in the forum FAQ:
https://community.oracle.com/message/9362005#9362005
For an example of both PIVOT and UNPIVOT in the same query, see
http://forums.oracle.com/forums/thread.jspa?threadID=920854&tstart=0
Similar Messages
-
How to display the first page alone first and two pages (back and front) then ?
Hi
I use acrobat 9 (beginner).
I have a document which should be displayed "as a book", ie two pages on the screen at the same time, the back of the first sheet and the front of the second one.
The problem I have is to manage to display the cover sheet as a single page (alone) and then to have the dual page layout as described above.
How could I do that ?
Thanks for your help
Regards
FanchHi Bernd
Thanks a lot. -
How to display the color of time period and the legend in Calendar view?
Hi,
Sorry to disturb you guys with a quite simple question.
I want to do a calendar view to display the period of absence for the portal user. I've setup the iView but it displays neither the color of time period nor the legend.
The problem is:
1) If I test with <i>static legend</i> (that is, I input the time period directly in the form instead of using data service),
a) I could only define <b>one</b> time period, because it's impossible to map the <i>out</i> port of calendar to <i>in</i> port of form on defining the event as 'goto'.
b) I can't see the color displayd while deploying although there is just one time period! Neither the legend. I' ve given the label and color of the legend and assigned the action as default in design board. Why it doesn't work?
2) If I test with <i>dynamic legend</i> following the chapter "<i>Display Date on a Calendar</i>" in the <i>Modeler's Guide</i> of VC;
I assigned @RECORDNR to 'ID legend field', and used BAPI_ABSENCE_GETLIST as dynamic legend data service to edit the legend, and assigned the color for every ID. But neither color nor legend could kindly appear. What's the problem? Is there any error in the edit of entry list of the legend?
Please help me! Thanks!!!Is there any advice?
I'll greatly appreciate your help! -
How to get the data from a file and insert into a table
Good morning,
NEED TO READ THIS FILE sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv containing the following information
NUID,NUMERO_DE_CUENTA_CONTRATO,CÓDIGO_DANE_DEPARTAMENTO,CÓDIGO_DANE_MUNICIPIO,ZONA_IGAC,SECTOR_IGAC,MANZANA_O_VEREDA_IGAC,NÚMERO_DEL_PREDIO_IGAC,CONDICION_DE_PROPIEDAD_DEL_PREDIO_IGAC,DIRECCIÓN_DEL_PREDIO,NÚMERO_DE_FACTURA,FECHA_DE_EXPEDICIÓN_DE_LA_FACTURA,FECHA_DE_INICIO_DEL_PERÍODO_DE_FACTURACIÓN,DIAS_FACTURADOS,CÓDIGO_CLASE_DE_USO,UNIDADES_MULTIUSUARIO_RESIDENCIAL,UNIDADES_MULTIUSUARIO_NO_RESIDENCIAL,HOGAR_COMUNITARIO_O_SUSTITUTO,USUARIO_FACTURADO_CON_AFORO,USUARIO_CUENTA_CON_CARACTERIZACIÓN,CARGO_FIJO,CARGO_POR_VERTIMIENTO_BASICO,CARGO_POR_VERTIMIENTO_COMPLEMENTARIO,CARGO_POR_VERTIMIENTOSUNTUARIO,CMT,VERTIMIENTO_DEL_PERIOD_EN_METROS_CUBICOS,VALOR_FACTURADO_POR_VERTIDO,VALOR_DEL_SUBSIDIO,VALOR_DE_LA_CONTRIBUCIÓN,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_CARGO_FIJO,FACTOR_DE_SUBSIDIO_O_CONTRIBUCIÓN_VERTIMIENTO,CARGOS_POR_CONEXIÓN,PAGO_ANTICIPADO_DEL_SERVICIO,DÍAS_DE_MORA,VALOR_DE_MORA,INTERESES_POR_MORA,OTROS_COBROS,CAUSAL_DE_REFACTURACIÓN,NUMERO_DE_LA_FACTURA_OBJETO_DE_REFACTURACIÓN,VALOR_TOTAL_FACTURADO,PAGOS_DEL_CLIENTE_DURANTE_EL_PERÍODO_FACTURADO
242602,242602,76,845,99,99,9999,9999,999,CLL 5 CRA 7 PEATONAL,24911920,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000005,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000000000.00
242604,242604,76,845,99,99,9999,9999,999,CRA 4 # 6 - 13,24911846,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000013,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000004411.00
242605,242605,76,845,99,99,9999,9999,999,CRA 2 CLLES 3 Y 4,24911509,12-01-2011,01-12-2010,30,01,,,0,0,0,1,0000000000.00,0000000000.00,0000000000.00,0000000000.00,0000000004,0000002200.00,0000000000,0000000000,0.000,0.000,0000000000.00,0000000000.00,0,0000000000.00,0000000000.00,0000000000.00,0,0,0000002201.00,0000002200.00
this is the function that I have
<<function_test>>
DECLARE
TOTAL_CAR NUMBER;
POS_1 NUMBER:= 0;
POS_2 NUMBER:= 0;
REST NUMBER:= 0;
ACUM NUMBER:= 0;
CADEN VARCHAR2(200);
nom_archivo varchar2(80);
v1 utl_file.file_type;
v2 varchar2(2048);
BEGIN
nom_archivo := 'sui_facturacion_alcantarillado_15085_2011_01_76845_00A.csv';
v1:= utl_file.fopen('PUBLIC_ACCESS',nom_archivo,'R',32767);
utl_file.get_line(v1,v2);
SELECT LENGTH(v2) INTO TOTAL_CAR FROM DUAL;
ACUM:=1;
POS_1:=0;
WHILE ACUM <= 60
LOOP
select instr(v2, ',', 1, ACUM) PRUEBA
INTO POS_2
FROM DUAL;
dbms_output.put_line(' TOTAL POSICION 1--> '|| POS_1);
dbms_output.put_line(' TOTAL POSICION 2--> '|| POS_2);
dbms_output.put_line(' TOTAL ACUMULADO --> '|| ACUM);
REST := (POS_2-POS_1)-1;
SELECT SUBSTR(v2,(POS_1+1),REST) PRUEBA2
INTO CADEN
FROM DUAL;
dbms_output.put_line(' CADENA SELECCIONADA --> '|| CADEN);
ACUM := ACUM + 1;
POS_1:= POS_2;
END LOOP;
utl_file.fclose(v1);
dbms_output.put_line(' -->');
dbms_output.put_line(' TOTAL POSICION 1-->'|| POS_1);
dbms_output.put_line(' TOTAL POSICION 2-->'|| POS_2);
dbms_output.put_line(' TOTAL ACUMULADO -->'|| ACUM);
dbms_output.put_line(' TOTAL DE CARACTERES -->'|| TOTAL_CAR);
dbms_output.put_line(' ');
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line('NO SE ENCONTRARON MAS CARACTERES');
WHEN OTHERS THEN
dbms_output.put_line('OTRO TIPO DE ERROR ');
dbms_output.put_line('CODIGO ERROR '|| SQLCODE ||' '||SQLERRM);
END;
Which must be separated by a comma and enter a table I have the following procedure in which only brings me the first line, which need not
The current role I have just read and extract data from the row number 1, I do not need information.
I need information for rows 2,3,4. In each row there are 41 fields, which I enter in a table called Dato_archivos.
how to perform this function? ...
I appreciate the cooperation and explanation ...
GOOD DAY ...
REYNEL SALAZAR MARTINEZ
COLOMBIA ...When you get an error with external tables (or sql*loader) look in the same folder as the data file and you should get a .log file and maybe a .bad file too.
The log file should indicate the nature of the error it has trying to load the data.
I've just copied your sample data from your first post to a file on my server and tried it to find that you are not specifying the required format for your dates. The below shows it now working...
CREATE TABLE tabla_prueba
(NUID NUMBER,
NUM_CUENTA_CONTRATO NUMBER,
COD_DANE_DD NUMBER,
COD_DANE_MM NUMBER,
ZONA_IGAC NUMBER,
SECTOR_IGAC NUMBER,
MANZANA_VEREDA_IGAC NUMBER,
NUM_PREDIO_IGAC NUMBER,
CONDICION_PREDIO_IGAC NUMBER,
DIRECCION_PREDIO_IGAC VARCHAR2(80),
NUM_FACTURA NUMBER,
FECHA_EXPED_FACTURA DATE,
FECHA_INI_PERIODO_FACTURACION DATE,
DIAS_FACTURADOS NUMBER,
COD_CLASE_USO NUMBER,
UNI_MULTIUSUARIO_RESIDENCIAL NUMBER,
UNI_MULTIUSUARIO_NORESIDENCIAL NUMBER,
HOGAR_COMUNITARIO NUMBER,
USUARIO_FACTURADO_AFORO NUMBER,
USUARIO_CON_CARACTERIZACION NUMBER,
CARGO_FIJO NUMBER,
CARGO_VERTIMENTO_BAS NUMBER,
CARGO_VERTIMENTO_COMP NUMBER,
CARGO_VERTIMENTO_SUNT NUMBER,
CMT NUMBER,
VLR_FACTURADO_VERTIDO NUMBER,
VLR_SUBSIDIO NUMBER,
VLR_CONTRIBUCCION NUMBER,
FACTOR_SUBS_CONTR_CARGO_FIJO NUMBER,
FACTOR_SUBS_CONTR_VERTIMENTO NUMBER,
CARGO_CONEXION NUMBER,
PAGO_ANTICIPADO_SERVICIO NUMBER,
DIAS_MORA NUMBER,
VLR_MORA NUMBER,
INTERES_MORA NUMBER,
OTROS_COBROS NUMBER,
CAUSAL_REFACTURACION NUMBER,
NUM_FACTURA_OBJ_REFACTURACION NUMBER,
VLR_TOTAL_FACTURADO NUMBER,
PAGOS_CLIENTE_DURANTE_PERIODO NUMBER
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY TEST_DIR
ACCESS PARAMETERS
(RECORDS DELIMITED BY NEWLINE
SKIP 1
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
(NUID,
NUM_CUENTA_CONTRATO,
COD_DANE_DD,
COD_DANE_MM,
ZONA_IGAC,
SECTOR_IGAC,
MANZANA_VEREDA_IGAC,
NUM_PREDIO_IGAC,
CONDICION_PREDIO_IGAC,
DIRECCION_PREDIO_IGAC,
NUM_FACTURA,
FECHA_EXPED_FACTURA CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
FECHA_INI_PERIODO_FACTURACION CHAR DATE_FORMAT DATE MASK "DD-MM-YYYY",
DIAS_FACTURADOS,
COD_CLASE_USO,
UNI_MULTIUSUARIO_RESIDENCIAL ,
UNI_MULTIUSUARIO_NORESIDENCIAL,
HOGAR_COMUNITARIO ,
USUARIO_FACTURADO_AFORO ,
USUARIO_CON_CARACTERIZACION ,
CARGO_FIJO ,
CARGO_VERTIMENTO_BAS ,
CARGO_VERTIMENTO_COMP,
CARGO_VERTIMENTO_SUNT,
CMT,
VLR_FACTURADO_VERTIDO,
VLR_SUBSIDIO ,
VLR_CONTRIBUCCION ,
FACTOR_SUBS_CONTR_CARGO_FIJO ,
FACTOR_SUBS_CONTR_VERTIMENTO ,
CARGO_CONEXION ,
PAGO_ANTICIPADO_SERVICIO ,
DIAS_MORA ,
VLR_MORA ,
INTERES_MORA ,
OTROS_COBROS ,
CAUSAL_REFACTURACION ,
NUM_FACTURA_OBJ_REFACTURACION,
VLR_TOTAL_FACTURADO,
PAGOS_CLIENTE_DURANTE_PERIODO
LOCATION ('test.csv')
SQL> select * from tabla_prueba;
NUID NUM_CUENTA_CONTRATO COD_DANE_DD COD_DANE_MM ZONA_IGAC SECTOR_IGAC MANZANA_VEREDA_IGAC NUM_PREDIO_IGAC CONDICION_PREDIO_IGAC DIRECCION_PREDIO_IGAC NUM_FACTURA FECHA_EXPE FECHA_INI_
DIAS_FACTURADOS COD_CLASE_USO UNI_MULTIUSUARIO_RESIDENCIAL UNI_MULTIUSUARIO_NORESIDENCIAL HOGAR_COMUNITARIO USUARIO_FACTURADO_AFORO USUARIO_CON_CARACTERIZACION CARGO_FIJO CARGO_VERTIMENTO_BAS CARGO_VERTIMENTO_COMP CARGO_VERTIMENTO_SUNT CMT
VLR_FACTURADO_VERTIDO VLR_SUBSIDIO VLR_CONTRIBUCCION FACTOR_SUBS_CONTR_CARGO_FIJO FACTOR_SUBS_CONTR_VERTIMENTO CARGO_CONEXION PAGO_ANTICIPADO_SERVICIO DIAS_MORA VLR_MORA INTERES_MORA OTROS_COBROS CAUSAL_REFACTURACION NUM_FACTURA_OBJ_REFACTURACION
VLR_TOTAL_FACTURADO PAGOS_CLIENTE_DURANTE_PERIODO
242602 242602 76 845 99 99 9999 9999 999 CLL 5 CRA 7 PEATONAL 24911920 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
5 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
242604 242604 76 845 99 99 9999 9999 999 CRA 4 # 6 - 13 24911846 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
13 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
242605 242605 76 845 99 99 9999 9999 999 CRA 2 CLLES 3 Y 4 24911509 12-01-2011 01-12-2010
30 1 0 0 0 1 0 0 0 0
4 2200 0 0 0 0 0 0 0 0 0 0 0
0 2201
SQL>
{code} -
How to read the data from excel file and store into the table?
Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
ThanksHi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu. -
How to read the data from XML file and insert into oracle DB
Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well. -
How to display the descriptions of a "question" and "answers" in the LMS?
Hello, evevyone,
I am new comer in Captivate 5.
In order to analysis the result of "Learner response", we need known the “Question” and “Answer” description of each Quiz in a SCORM player.
Does Captivate return these information back to LMS?
For example :
I have created a quiz with one question.
Do you have a dog? ------->Question description
(A)Yes ----->Learner response
(B)No
After complete the quiz on LMS, Captivate will return the "Do you have a dog?" and "(A)Yes" back to LMS ?Dear RodWard,
I am trying anohter LMS named SCORM Cloud.
The question description does not return to LMS.
You can see the Message Log:
cmi.interactions.3
cmi.interactions.3.id: 1272
cmi.interactions.3.type: LongFillIn
cmi.interactions.3.timestamp: 2011-09-29T21:01:43
cmi.interactions.3.correct_responses.0.pattern: aa
cmi.interactions.3.weighting: 10
cmi.interactions.3.learner_response: aa
cmi.interactions.3.result: correct
cmi.interactions.3.latency: 0000:00:02
cmi.interactions.3.description: <--------------No description
I am sure that Captivate will not return the question description.....
Am I right? -
How to get the data from one table and insert into another table
Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
ThanksYou can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash -
How to display the content of a BLOB column in a ADF/BC pages ?
How to display the content of a BLOB column in a ADF/BC pages ?
There is some image in database table blog column. And we want to display image on the screeen.
There is some example about upload and dowload blog columns.
(steve not yet document example page etc...)
But We want to display blog picture in a image component...
is there any basic way to do it ?
Thanks a lot...Ali,
You could just download the sample app... but... here is the servlet code from the demo (look at it just for technique - you'll obviously have to change it for your needs)...
John
package oracle.fodemo.storefront.servlet;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.servlet.*;
import javax.servlet.http.*;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import oracle.jbo.domain.DBSequence;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ViewObjectImpl;
public class ImageServlet
extends HttpServlet
private static final String CONTENT_TYPE =
"image/jpg; charset=windows-1252";
public void init(ServletConfig config)
throws ServletException
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
response.setContentType(CONTENT_TYPE);
response.setContentType(CONTENT_TYPE);
String detailProductId = request.getParameter("detail");
String thumbnailProductId = request.getParameter("thumbnail");
boolean thumbnail = true;
String productId = null;
OutputStream os = response.getOutputStream();
String amDef = "oracle.fodemo.storefront.store.service.StoreServiceAM";
String config = "StoreServiceAMLocal";
ApplicationModule am =
Configuration.createRootApplicationModule(amDef, config);
ViewObjectImpl vo =
(ViewObjectImpl) am.findViewObject("ProductImages"); // get view object (the same as used in the table)
if (detailProductId != null)
productId = detailProductId;
thumbnail = false;
else
productId = thumbnailProductId;
vo.defineNamedWhereClauseParam("paramThumbnail", null, null);
vo.defineNamedWhereClauseParam("paramProductId", null, null);
vo.setWhereClause("DEFAULT_VIEW_FLAG = :paramThumbnail AND PRODUCT_ID = :paramProductId");
vo.setNamedWhereClauseParam("paramThumbnail", (thumbnail? "Y": "N"));
vo.setNamedWhereClauseParam("paramProductId", productId);
vo.executeQuery();
Row product = vo.first();
BlobDomain image = (BlobDomain) product.getAttribute("Image");
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[10 * 1024];
int nread;
while ((nread = is.read(buffer)) != -1)
os.write(buffer, 0, nread);
os.close();
vo.setWhereClause(null);
vo.removeNamedWhereClauseParam("paramProductId");
vo.removeNamedWhereClauseParam("paramThumbnail");
Configuration.releaseRootApplicationModule(am, false);
} -
How to display the the tablix column lines upto footer in rdlc report
How to display the the column lines upto footer in rdlc report.If data are less it should go upto bottom (footer) based on data.
For Example.I have 2 items.it should display 2 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| | | | | |
|
| | | | | |
|
| | | | | |
|
| | | | | |
|
Footer
If I have 5 items.it should display 5 items and lines should continue upto footer.
| S.No| Name | Qty | Active | UNIT | Amount |
| 1 | A | 1 | 4 | 34 | 43 |
| 2 | B | 6 | 3 | 23 | 45 |
| 3 | C | | 4 | 47 | 56 |
| 4 | D | 3 | | 56 | 47 |
| 5 | E | 4 | 4 | 45 | 45 |
| | | | | |
|
| | | | | |
|
Footer
like that it should be adjust based on data length.
please help me how to do it in RDLC (asp.net and c#).....
Your help would be highly appreciated!
Thank you very much in advance!Hi M.S.GopalKrish,
According to your description, it seems that you want to make the tablix rows to fill page size? We can configure the text box height size to work around the issue.
Use this method, we need to calculate the average height size of the text box in the tablix. For more details, please see:
We can use
RowNumber() function to calculate the row number of the tablix.
Calculate the page height size of the tablix in Property windows.
Use the page height size divided by row number. We can get the average height size of the text box.
Hope this helps.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to display the value of a column in a chart at the top of each column
How to display the value of each column in a chart at the top of each column?
Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry -
How to display the total at the end of the column in the report.
Hi all,
Could any one please intimate, how to display the total at the end of the column. For example, i have a column, "sales" as the Key figure, and it has the data for all the transactions. Now, i would like to display the total at the end of the report, below the same column.
Similarly, for all the other columns in the report, i need to display the total for all the columns in the report.
Thanks & Regards,
A.V.N.RaoHi All,
Thanks for many suggestions. I tried by providing the "Total" under "Calculate Results as" and also "Counter for all detailed values" under "Calcuate Single Values as", in the "Calculations" tab of the key figure, but i am unable to get the information. Again, i am providing the requirement below:
CHAR - A CHAR - B TIME CH. - 1 KF -1 KF- 2 KF - 3
1 RAM 2012 1 50 50
2 SAM 2012 2 100 200
Result 3 150 250
Assume KF -1 as "Qty." KF-2 as "Price" KF-3 as "Sales".
Please intimate the solution.
Thanks & Regards,
A.V.N.Rao. -
How to display the result of excutions(insert/update/delete rows)
Hello.
Does anyone know how to display the result of scenario executions just like a scenario executions tab of package (insert/update/delete rows) in other screen (in the intergated operating platform for operators using http)
In additional, I also like to show the hierarchy of scenario in the same view.
So, I need the query using the information of the ODI repository.
If it is possible, I also like to have the decription of the tables in the ODI repository.
Can anyone tell me how can I get the information of the counts of excution?
Thanks in advance.Hi,
You can get that information from the API getPrevStepLog. Does it work for you?
Download the last API reference manual from:
http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/1013_support.html#docs -
How to display the sort value in the selection screen in the report title
Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun SHi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM -
How to Display the Predefault Date Time
Hi frnds,
How to display the Default DateTime in the date field via sctipting i have a requirementy to show in one of the date field as next day's date with 9:00 a.m time stamp(2/15/2010 9:00 A.M) the data type of that field& column is UTC_datetime.please help i am getting.
siebel beeHave a look at the function Today(), TimeStamp() and ToChar()
You should be able todo it with something similar to this:
Expr: "ToChar(TimeStamp(),'MM') + '/' + ToChar(TimeStamp(),'DD') + '/' + ToChar(TimeStamp(),'YYYY') + ' ' + ToChar(TimeStamp()+(1/24),'HH') + ':00:00'"
as a pre-default value.
Maybe you are looking for
-
Hi All, I have a requirement where in i need to show the last transaction date that took place at sales org level. following is my data in the cube Sales org------plant---------transaction date S001...........P100...........01.02.2014 S001...........
-
Hi - anyone who can help would be greatly appreciated as I am beyond frustrated. I have Adobe Reader (version 11.1.3) on my Android phone (SG4) but this applies to iPhones as well. Some PDF files open without issue. But there are a few that just giv
-
Process chain hangs due to locks in SM12
We are currently experiencing issues when executing the process chains. The process chain hangs at one or more DTP loads without executing the following step even though the DTP load is successfully complete (Green). Upon research found that the syst
-
Hi, i have an iPhone 4 using iOS 6.1.3, my problem is that with certain contacts the imessage function does not function even though myself and the other contact has imessage activated, yet with others the imessage function automatically activates as
-
Issues with SNP_CHECK_TAB being an invalid object
During the Control step 'delete previous check sum' I encounter the following error: 208 : S0002 : java.sql.SQLException: [DWSQL]Invalid object name 'companyx_prod_workspace.dbo.SNP_CHECK_TAB'. java.sql.SQLException: [DWSQL]Invalid object name 'compa