Dynamic Configuration - CC Receiver - Abap Mapping

How can I add info in the xml message in Dynamic Configuration from Abap Mapping ?
Thanks in advance.

Hi,
The following should do the trick:
data: l_dyn_record type MPP_DYNAMIC.
l_dyn_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_dyn_record-name = 'FileName'.
l_dyn_record-value = 'myFileName'.
CALL METHOD dynamic_configuration->add_record
EXPORTING
record = l_dyn_record.
Regards,
Daniel

Similar Messages

Doubt om Dynamic Configuration of receiver file

Hello ,
for Acheiving the Dynamic configuration of receiver file name ,adapter specific message attribute is used...But how to suppress the name of file in the content of the Received file...
Is my question correct..do we get the file name in content of the receiver file,while using the Adapter specifc message attribute.
And another question ,in the Variable substitution ...do we get the above problem,then how to tackle the situation to suprress the file name in the payload of receiver file.

HI,
You can handle the dynamic file name via Dynamic configuration or with the help of Variable Substitution.
Please refer
have a look
Dynamic File Name using XI 3.0 SP12 Part - I --> Dynamic File Name using XI 3.0 SP12 Part u2013 I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II --> Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
With Variable Substituion, you may need to supress the filename
Dynamic File Name - Suppress the Substitue varible
Let me know if you need anymore info.
Thanks
Swarup

Use dynamic configurations inside an abap proxy

Hi,
is it possible to set dynamic configurations inside an abap proxy?
Inside an abap-mapping I can use "CALL METHOD DYNAMIC_CONFIGURATION->SET_RECORD".
What's up with an abap proxy?
Regards
Wolfgang Hummel

Hi,
Not Possible.
Thanks!

Dynamic configuration of Receiver FTP File channel

Hi,
The scenario is sending an IDOC from an R/3 system (using IDOC adapter) to a FTP file system. I want to dynamically configure the filename and the target directory in the following cases
1. With filename and the target directory coming as a part of the source IDOC
    structure
2. There is mapping involved (pass thru) and the file name and target directory are
    NOT a part of the source IDOC structure.
I have seen blogs which explains the situation using mapping for File-To-File scenario (Not IDOC-To-File scenario) and some blogs explaining for Http adapter and email adapter, but not for the above scenarios for IDOC-To-File Scenarion.
Your input is highly appreciated.
Regards
Ganesh

hi
use Varable susbtituion in receiver file adapter
you set the Enable indicator, you can enter variables for the Target Directory and File Name Scheme. Enter the names of the variables and references in the table.
●      Enter each variable that you reference in the Target Directory and File Name Scheme fields without the surrounding percentage sign under Name of Variables in the table.
The variables can refer to attributes of the message header or elements of the message payload.
○       If the variables are to refer to an attribute of the message header, add the prefix message: to the name of the variable under Reference. You can specify the following attributes of the message header:
sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
For example, if you want to specify the interface name from the message header in the target directory or in the file name scheme, enter message:interface_name as the reference.
or look into help
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
please reward points
Thanks
Sreeram.G.Reddy
Message was edited by:
        Sreeram Reddy

File name cant be fetched from Dynamic configuration...mutli-mapping used

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Dynamic Configuration from Client ABAP Proxy

Hello Experts,
Is it possible somehow to set Dynamic Configuration values to Message Header when calling Client ABAP Proxy from SAP system?
Best Regards

I managed to get the dynamic header configuration at least with inbound proxies:
    DATA:
        server_context TYPE REF TO if_ws_server_context,
        proxy_framework TYPE REF TO if_proxy_framework,
        internal_protocol TYPE REF TO if_wsprotocol_internal,
        lo_inb_pxy TYPE REF TO cl_xms_inbound_proxy_plsrv,
        lo_dyn_header TYPE REF TO if_xms_msghdr30_dynamic.
      server_context = cl_proxy_access=>get_server_context( ).
      internal_protocol ?= server_context->get_protocol( 'INTERNAL' ).
      lo_inb_pxy ?= internal_protocol->get_framework( ).
      lo_dyn_header ?= lo_inb_pxy->xmb_message->get_dynamic_header( ).

Dynamic configuration of receiver communicaton channel?

I have files, Header line tells which server it should go.(Like ip address and port). How can dinamically configure the receiver communication channel.
Thank You
Ganges Leaves

Hi,
I have very similar requirement, In my scenario I need to pick up files from 4 static locations and based on the file name and pick up type(file/ftp) I can find out the destination's connectivity information from a Cross-Referencing table(Based on MS-SQL Database table- I can get this using look API) in this table we maintaining more than 100 destinations(host/user_name/password etc).
Now I need to set the connectivity information dynamically at runtime. I know this is not possible with Standard XI but does anyone thinks this is possible by any technical way using with XI.. Adapter Modules or Java Proxies?
This is very Critical to win the war with other middleware tools. Please let me know your thoughts and comments...
thanks,
Laxman Molugu

Dynamic configuration in ABAP Mapping

Dear All,
I have requirement to use the filename's name in the mapping to the target message.
e.g: Filename is Victor.303, i need to take this 303 and map it to the target message.
I understand i can get that value using dynamic configuration in Adapter-Specific Attributes.
But all the samples are using Java code used in UDF.
How to do the same in ABAP Mapping?
I tried:
   record = dynamic_configuration->get_record( namespace = 'http://sap.com/xi/XI/System/File'
                                                    name = 'FileName').
But record-value return blank.
Best Regards,
Victor.

Dear Prateek,
I changed my code with:
DATA: record TYPE mpp_dynamic.
CALL METHOD dynamic_configuration->get_record
    EXPORTING
      namespace = 'http://sap.com/xi/XI/System/File'
      name      = 'FileName'
    RECEIVING
      record    = record.
but record-value still return as blank.
I have doubt in this, do i need to populate the FileName in the dynamic configuration (in the graphical mapping) first before i can get the value in the ABAP mapping? or System should filled it and i just can use it directly in the ABAP mapping?
How we know what is the available name and namespace in that dynamic configuration-->get record??
(e.g: my case is FileName, and in the link that you gave is ERROR.)
Any link for this?
Best Regards,
Victor.

Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!

Hi Friends,
We are planning send message to different receivers through XI adapter by using Dynamic Configuration.
Can anyone please tell me what are the dynamic attributes used for XI adapter.
In my scenario, I want to pass the Service Number and Path prefix of XI adpater dynamically by using sender ID from Idoc payload.
I know how to use the dynamic configuration UDF in message mapping. But I don't know the dynamic attributes which we can pass to Service Number and Path prefix of XI adpater.
Kindly suggest ..
Thanks
Deepthi.

Hi Sourabh,
>> You need to set these attributes explicitly in the adapter configuration..
Can you please elaborate on this like how to implement this? Do we need to use any module configuration in the adapter?
We will use XI adapter only while sending the data directly from IE without using any feautures of AE (like adapters, modules etc). It is like directly sending data from ABAP stack without using J2EE stack. That is the reason we can't use any Modules in XI adpater and it is in disabled by default.
When I checked in SXMB_MONI.. as you said details are found in
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>10.190.25.16</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/rcvA/receiver</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>8210</SAP:Value>
</SAP:Attribute>
XI adapter uses mainly three parameters Host, Port and Path.
I want to pass any two of these values dynamically to achieve my solution. Can you please suggest your solution how we can implement it.
-Deepthi.

ABAP Mapping for Error handling in Proxy to JDBC

Hi All,
I am working on a proxy to jdbc scenario in which we have to throw validation errors to NWPM(Net Weaver Process Monitor Tool)
I am following the below steps,
step 1 - In message mapping a UDF is created to catch errors and store them in a variable using dynamic configuration
step 2 - writing abap mapping for handling this thrown exception and im reading the dynamic configuration in the abap class and raising exception. The exception format expected is
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1>ZPI_THROW_EXCEPTION</SAP:P1>
<SAP:P2>001</SAP:P2/>
<SAP:P3>Mandatory field is missing[BUKRS] </SAP:P3>
   <SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have written the following ABAP code to achieve this:
method IF_MAPPING~EXECUTE.
DATA l_record type mpp_dynamic.
DATA error type String.
getting dynamic configuration value
filled in by any previous mapping
CALL METHOD DYNAMIC_CONFIGURATION->GET_RECORD
EXPORTING
    NAMESPACE = 'http://sap.com/xi/XI/System/ERROR'
    NAME      = 'ERROR'
RECEIVING
    RECORD    = l_record.
error = l_record-value.
*raising exception with our message
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '001'
    ERROR_TEXT = error .
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '003'
    ERROR_TEXT = error .
endmethod.
I am gettign the following message for our code:
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Could you please help in finding the solution for getting currect error message from ABAP class?
Edited by: SwethaC on Jan 21, 2011 8:18 AM

The error is due to RFC Call fail from PI system to your ECC Application System.
Check your RFC Destination for ECC System type 3 in PI System.
When you are receiving data from ECC System using Proxies & again you are going to ECC System for Validation.
Why you are not doing this validation on ECC System only in your proxy code ?
In your proxy code, it will be much better for performance to check your data there on same system.

Dynamic Configuration File Names

Hi,
I have a RFC->XI->File scenario.
I have to put the target files names based on the calculation of values in 2 fields in the input.
I tried using Dynamic Configuration in my message mapping for this.
This is the code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
I checked ASMA in both the sender RFC adapter as well as the receiver file adapter.
But it never works.
I saw the dynamic configuration tab in SXMB_MONI but i can see only the RFC destination parameter.
Cant see the file filename parameter.
What is the problem here?

No need enable ASMA on RFC sender adapter.
See if the file channel is activated after selecting ASMA with FileName.
The UDF might not be use in the mapping. Check this.
Edited by: Praveen Gujjeti on Feb 23, 2010 1:05 AM

Is Dynamic Configuration possible with IDOC adapter.

Hi,
I have SOAP to IDOC scenario. I have many SAP receivers and are determined at runtime in a Java map.
Can i use Dynamic Configuration for IDOC adapter?
Thanks
Shakthi

Hi Sivasakthi,
Why do you need Dynamic Configuration in receiver IDOC?
Regards,
Sanjeev.

Error Message through Dynamic Configuration length problem

HI All,
We are trying to raise an error message with the help of Dynamic configuration in the Message mapping.
The need is to populate the message with certain variables.
However we are facing the problem that the message is getting truncated beyond a certain length.(Around 60 characters)
Similar custom messages in other interfaces are working fine for messages up to 100 characters.
Question:
1. What could be the maximum length for an error message in case of mapping failure?
2. What could be limiting the length of the message in our case?
Thank you for looking into this.
Regards,
Ankesh

hi Ankesh,
yes, there is limit length, see this oss [Note 974481 - XI Adapter Framework DynamicConfiguration Module|https://service.sap.com/sap/support/notes/974481]
regards.
Mickale

Dynamic configuration in integration process using abap mapping

Hi everybody,
i have the following scenario:
file adapter -> integration process -> file adapter
The integration process uses an ABAP mapping and sets the filename in dynamic configuration as follows:
*-- Set Parameter
    clear ls_dyn_record.
    ls_dyn_record-name      = gc_dyn_config_name.
    ls_dyn_record-namespace = gc_dyn_config_ns.
    ls_dyn_record-value     = <new_file_name>
*-- Write configuration
    ir_dyn_config->add_record( ls_dyn_record ).
But now the new filename is not reflected in the file adapter (receiver). In the integration monitor (SXMB_MONI) i still find the old filename.
Whats wrong?
Elko

The ABAP mapping is more complex, setting filename in Dyn. Conf. is just one step in mapping.
If I check the Workflow protocol of the Integration Process, I find the following in the Trace of the ABAP-Mapping:
The filename has been set to 3233340.SWNF00HW.P10I. The Suffix P10I has been added in the ABAP mapping.
When I check the subsequent message in SXMB_MONI I find:
The added suffix is missing in the filename !!
Elko

Acces dynamic configuration variable (e.g. filename) in ABAP mapping class

Hi experts
I am searching for a possibility to acces a dynamic configuration variable (DCV) in an ABAP mapping class. Since I could not find a solution in SDN and other sources, I hope somebody in this forum can help me.
What I already found is the following code which can be used to set a DCV, but what I would be interested in is how to read a DCV.
Any help is appreciated.
Markus
METHOD if_mapping~execute.
DATA l_record type mpp_dynamic.
* copy payload
result = source.
* add an adapter specific attribute
l_record-namespace = 'http://sap.com/xi/XI/System/File'.
l_record-name = 'FileName'.
l_record-value = 'test.xml'.
dynamic_configuration->add_record( l_record ).
ENDMETHOD.

Hi Markus,
you can find everything in my blogs
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
Regards,
michal

Dynamic Configuration - CC Receiver - Abap Mapping

Similar Messages

Maybe you are looking for