Dynamic configuration for the application

I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
anton

A lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member)

Similar Messages

AADSTS50011: The reply address does not match the reply addresses configured for the application

Can anyone tell me where to update the reply address?
I have AD synced from on-prem to Azure, then I setup a website on azurewebsites.net, then created a CNAME record from portal.mydomain.com to portal.azurewebsites.net. When I try to login using portal.mydomain.com I get:
AADSTS50011: The reply address does not match the reply addresses configured for the application.
Can anyone help? Thanks
Frank Russo

Hi Frank69,
Thanks for posting here!
It appears to me that the application is unable to find the URL you have configured on Azure or could be missing from the list. As a result the application is attempting to authenticate against AAD but failing to match the URl it wants.
I would suggest you to re-configure your AAD application on Azure and set one or more reply URLs.
Reference link:
http://www.matvelloso.com/2015/01/30/troubleshooting-common-azure-active-directory-errors/
Regards,
Sadiqh
Disclaimer: This response contains a reference to a third party World Wide Web site.
Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there.
There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

Dynamic configuration for the remoteworkflowclient not wf_client_Config.xml

I need to connect to multiple servers(hosting the bpel workflow) based on input of the IP address of the server at runtime.
I cannot modify the wf_client_config.xml at runtime as it will be within the client jar.
Is there any other mechanism of connecting to mulltiple servers to get List of Tasks or any such functionality.
Currently it seems that the IP and other configuration needs to be hard coded into the .xml file and i am unable to any mechanism where this information can be provided at runtime.
Any help will be appreciated

Hi,
Did you ever find out a solution to this problem?
If so, it would be much appreciated if you could post it.
Thanks in advance,
Aagaard

Dynamic configuration for PI 7.1 in mapping for file adapter

Hi Experts,
I have used the code below to use dynamic configuration in PI 7.1, but it isnt working..
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm.
it shows the file name in the dynamic configuration in the sxmb_moni...
but hen i chekc it in operations mapping..it shows dynamicconfiguration has to be in queue ..
has ne one used it before??
I used a simple UDF to create it without any input parameter and I mapped it to a field n the target side...
has ne one faced a similar situation????
Regrads,
Tauseef

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Dynamic Configuration for determining filename

Hi ,
I am using dynamic configuration for determining the filename sent by the sender
I am using the following code::
int i = 0;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
if (ourSourceFileName.equals("data.txt"))
for (i = 0 ; i < 1 ; i++)
result.addValue(ourSourceFileName);
i have also 'checked' filename in set Adapter specific message propertiesas in sender communication channel.
But Still it is not working.
Please provide some help on it.
Thanks & Regards
Nilima

Hi,
Michal
In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
and it displays::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName"><b>try1.txt</b></SAP:Record>
</SAP:DynamicConfiguration>
please sir provide some help on it.
Thanks once again.

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

XSLT Mapping with Dynamic Configuration for Mail Adapter

Hi Guys,
I am wondering if somebody can help me please.
I have a requirement in which I need to pick up the file from FTP and email it to the user as an attachment with the same file name and content.
I know it is possible via 3 method either by deploying adapter module or via XSLT or JAVA Mapping.
I preferred XSLT Mapping because it is easier to use and we don't need to compile the code like JAVA Mapping.
I have done the XSLT Mapping but the only problem I am facing is that how to copy the file name which we get it from Dynamic Configuration to the Mail ContentDisposition.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:map="java:java.util.Map"
xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">

    <xsl:variable name="dynamic-conf"
        select="map:get($inputparam, 'DynamicConfiguration')" />
    <xsl:variable name="dynamic-key"
        select="key:create('http://sap.com/xi/XI/System/File', 'FileName')" />
    <xsl:variable name="dynamic-value"
        select="dyn:get($dynamic-conf, $dynamic-key)" />
    <xsl:variable name="dummy"
        select="dyn:put($dynamic-conf, $dynamic-key, $new-value)" />
    
I tried many option but unfortunately none of them worked.
<Content_Disposition>attachment;filename="$inputparam"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-conf"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-key"</Content_Disposition>
<Content_Disposition>attachment;filename="$dynamic-value"</Content_Disposition>
<Content_Disposition>attachment;filename="$dummy"</Content_Disposition>
         <Content_Disposition>
            attachment;filename=
            <xsl:value-of select="dynamic-key"/>
         </Content_Disposition>
I really appreciate if someone can please provide some guidance.
Thanks,

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Dynamic Configuration for IDOC

Hi,
Whenever an IDOC is send from SAP R3 system to PI (SAP R3 -> SAP PI -> Target), we get an additional node of Dynamic Configuration under the SOAP Header in SXMB_MONI.
Why is this happening? Does this happen for all the versions of SAP XI (PI)?
This issue does not occur when the IDOC is send by SAP PI to SAP R3 system (Source --> SAP PI --> SAP R3)
I am using SAP PI 7.1.1
Thank you,
Pankaj.

Hi,
Why this is an issue for you?
I am trying to send IDOC from SAP System to PI system.
Ideally there should be no DynamicConfiguration step under SOAP Header folder in SXMB_MONI (I tested a SOAP -> PI -> FILE and the Dynamic Configuration does not come); unless and until we make use of the ASMA properties (UDF/ Module). Is this understanding correct?
For example, if I send an IDOC i get the below details in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<SAP:DynamicConfiguration SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPOR">SAPPI</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRT">LS</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRN">SAPPISYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPOR">SAPECC</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/Message/30" name="CALLER_CODEPAGE">4102</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="SNDPRN">SAPECCSYSTEM</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="CIMTYP"/>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="IDOCTYP">Z_VALIDATION_ACK01</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="MESTYP">Z1VALIDATIONACK</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/IDoc" name="RCVPRT">LS</SAP:Record>
</SAP:DynamicConfiguration>
Is this behavior as expected?
Thank you,
Pankaj.

Error: Invalid configuration for the JMS adapter

Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="Pet">
               <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
          <wlevs:listener ref="pet_inputChannel" />
          <wlevs:instance-property name="converterBean"
               ref="PetMessageConverter" />
     </wlevs:adapter>
     <wlevs:channel id="pet_inputChannel" event-type="Pet">
          <wlevs:listener ref="pet_messageProcessor" />
     </wlevs:channel>
     <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
     <bean id="PetBean" class="testewithprotobuf.PetBean" />
     <wlevs:processor id="pet_messageProcessor">
          <wlevs:listener ref="pet_outputChannel" />
     </wlevs:processor>
     <wlevs:channel id="pet_outputChannel" event-type="Pet">
          <wlevs:listener ref="PetBean" />
     </wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
     @SuppressWarnings("rawtypes")
     @Override
     public List convert(Message message) throws MessageConverterException,
                                                            JMSException {
          BytesMessage bytesMessage = (BytesMessage) message;
          long bodyLen = bytesMessage.getBodyLength();
          byte[] buffer = new byte[(int) bodyLen];
          bytesMessage.readBytes(buffer);
          try {
               Pet pet = Pet.parseFrom(buffer);
               return Collections.singletonList(pet);
          } catch (InvalidProtocolBufferException e) {
               throw new MessageConverterException(e);
Please, what's wrong?
Thanks!

This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to

I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to it. I've checked the obvious things, changed the fuse, tried different cables, poked paperclips in reset holes, but nothing doing. I wonder if there is anyone who knows what might be wrong. I was hoping to get some of its content transferred soon, but I'm guessing that can't be done if it can't be started up. Many thanks, if you can help

Hello,
>It's as though no power is getting to it.
Would it be correct to assume that no sounds at all can be heard? Also, no lights, not even green or amber at the power button?
>unfortunately had a power cut.
Was it possibly a power cut in connection with a thunderstorm? Any other evidence of higher than normal voltages (light bulbs, et cetera)? Has the line voltage been checked (measured with an appropriate voltmeter/multimeter)?
If necessary, it would be possible to remove the hard drive, and then connect it to an external IDE/ATA to USB adapter (example below). That way you could gain access to files on the hard disk from another computer.
http://www.newertech.com/products/usb3_universaldriveadap.php
Jan

TS1702 when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Warning:The EXPORT data cluster is too large for the application buffer.

Hi Friends,
I am getting following warning messages whenever I click on costing in "Accounting" tab.
1. Costing data may not be up to date Display Help
2. No costing variant exists in controlling scenario CPR0001
3. An error occurred in Accounting (system ID3DEV310)
4. The EXPORT data cluster is too large for the application buffer.
I can create project automatically from cprojects. PLan costs, budget and actuals maintain in WBS elements can be visible in cproject Object Links.
Your reply is highly appreciated.
Regards,
Aryan

Hi;
Please, check the Note --> 1166365
We are facing the same problem in R3, but apply this no fix it.
Best regards.
Mariano

TS1702 i cant download new application on my Iphone everytime i open app store then searching for the application i want to download when i Tap the FREE sign it become half square and never downloaded.

i cant download new application on my Iphone everytime i open app store then searching for the application i want to download when i Tap the FREE sign it become half square and never downloaded.

Sometimes this happens because the app won't run on the iOS version of the device you are trying to install it to. Go to the app store and make sure it will run on iOS 3.1.3 (many only run on iOS 4 or higher).

Dynamic configuration for the application

Similar Messages

Maybe you are looking for