Dynamic control alignment

My requirement is like this :
As part of customization, I am planning to let the user realign the controls in a HTML page.
Since I dont have sufficient time, I am not able to write code for this purpose. Is there any ready to use code available for this?

My previous answer was serious.
You said you didn't have a lot of time. And the vast majority of business cases re-arranging stuff is just eye candy. Most people wont use it (like macro languages in editors.)
To make a project succeed at some point it can become necessary to cut functionality. That is a project level decision and it sounds like you need to make it.
The page info will be transferred to an applet and the applet will convert the tags You could probably find something like this in a web editor, but it would have to be written in java. And unless it is already set up for embedding you would end up doing a lot of work.

Similar Messages

VI Analyzer control alignment rules

Just curious, what is the VI Analyzer looking for when checking front panel control alignment? I'm getting the message "The controls on this VI's front panel are not arranged in a manner similar to their locations on the connector pane (left). A VI is more self-documenting when its front panel arrangment matches that of its connector pane." However, the three controls are visually aligned with the connector pane (see below). Is it the fact that the controls on the left are right aligned? Does it look at vertical spacing?

Well, by experiment it must be the right alignment because I tried left aligning the controls and the message went away. I think it's visually less pleasing though, so I'm going to go back to the right alignment and ignore the message.

MVC - adding dynamic controls to each row in list

I'm using VS.Net 2013/C#/Razor
I have a dynamically created table with employee data (name/emp number/start date/title). We're trying to keep track of the percent of an employee's job doing certain duties.
What I need (for each employee) is to add a dropdown list with a list of duties, and then add a a textbox for percentage of time (don't worry about percentage), but I need 4 of each per employee, named with some relevance to each employee
Like:
Emp Name-Emp Number - DropDownList - TextBox
                                       DropDownList - TextBox
                                       DropDownList - TextBox
                                       DropDownList - TextBox
Each Dropdownlist will have the same items in it, and the end user will select from the DDL, and enter the number in the textbox.
I've tried this:
for (int lines = 1; lines < 5; lines++)
<tr>
<td colspan="5"> </td>
<td class="altText">radio buttons</td>
<td class="altText">ddlActivity + @item.empNumber + @lines.ToString()</td>
<td class="altText">DropDown</td>
<td class="altText">FTE Textbox</td>
<td class="altText">Total FTETTextbox</td>
</tr>
But the output is more like the formula and not what I need: ddlActivity + (empNumber is correct) + 1 with the plus shines showing.
How can I create name these dynamic controls so that they're tied to that particular employee?

Hello Elmo,
Welcome to MSDN forum.
Your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET MVC programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Scripting configuration for Dynamic Controls

I would like to put the configuration of Dynamic Controls (Process/Service Controls' selector values, URI, etc.) in a script to invoke from a command line. Any suggestions?

Are you want to run this script at development time before deploying or what do you want to achieve? Upcoming SP4 will offer a solution to retrieve config parameters for certain controls dynamically at runtime (and change it on the fly).
-Kai

Control Array or Dynamic Controls in adf

Hi All,
Is that possible to create control arrays or we can create dynamic controls in adf like .net. Please advice or share some sample code.
Thanks,

Thanks for your reply. Actually i want to create some buttons in runtime. means if i have 10 records in table i need 10 buttons on my page but they should share the same code by passing the index of control.
Thanks

Dynamic control questions?!!

Dear all, I got one problem when I used the PID control toolkit to obtain the dynamic control response. When, I input the sinusoidal signal to the system under PID control, the frequency for the output signal is 5 times larger than the input. For example, when I input frequency 0.1 Hz, the frequency of the output signal is 0.5 Hz. I do not know why, and the frequency shouldn't be changed. Amplitude and phase may change. the attachment photo is the block diagram and the program files can be running when they are put in the same directory.
Thx!!
Message Edited by SarahM on 05-21-2007 07:50 AM
Attachments:
aaa.JPG ‏121 KB

abc-123,
I just wanted to let you know that we removed the code in your previous post (PID dynamic.zip). This contained your VIs but it also contained some of the VIs from our licensed and purchasable PID toolkit. In our Terms of Use under Intellectual Property and Your Condict it references posting protected software. These VIs from our toolkit cannot be posted on the forums, but feel free to repost your own code. Thank you!
-Allison S.
Calibration Services
Product Support Engineer

Dynamic Control

Hi !! I'm doing a development of 3D crane(Axis XYZ), using PI Controler to control the system's errors. I made a VI to control the motors for move a piece from initial position to another position.
But I can't setup the VI to move more pieces to other position in sequences, I want to apply a dynamic control on the block diagram to use a sequences of set points in the front panel.
How do I use the dynamic control or other type of it? Where I can found other tutorials?
Pls send me some informations in case.
Tks in advanced
Eduardo
Message Edited by Ecastagnaro on 09-29-2006 10:54 AM

Hello Eduard,
I think i see your problem and understand your program.
First you have to document better! Terminals named numeric 1-5 don't make much sense.
You already got the positions to go to (in Set Point inticial
This VI is OK, but could be better:
In that way it is easier to add new position
Now if you want to move between several positions you're code should be like this:
Where I replaced the while loop with a for loop.
Moved the position control out of the loop and replaced it with an array with all the points to pass.
However if this is homework you should put some effort in optimizing (and cleaning) your code.
There are several optimizations possible in your code...
Read this:
The link to the LabVIEW Learning Center is here
Ton
Message Edited by TonP on 09-30-2006 01:55 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Set Point (SubVI).png ‏20 KB
Controlador PI Rev4.png ‏39 KB

Can I dynamically control the position of objects on a printed page?

Forum:
Oracle Developer Reports Builder (10g)
I have a need to control the position of printing on a peel off label in my report. I currently am forced to represent a complex object three times , i.e. LEFT, RIGHT and CENTER, printing whichever is configured in the PRINTER_INFO table of my schema. I am printing to over 200 printers and they all print the location differently.
Also, since printing through the DESTYPE=PRINTER ,vs printing from a displayed PDF have different results, I would have to refresent these three objects yet again, sligh lower and to the right to support label printing from a PDF.
I have seen where Word Macro can dynamically position this same object by using xy coordinates.
Does anyone know how to do something like this in Oracle Reports.
Thx in advance,
Gary
[email protected]

Dora,
Yes, that is exactly what I am doing. As I mentioned, the label object has many elements and they all sit on top of each other when doing the layout. This by itself is messy to work with.
This has been workable so far with regard to generating output to the several hundred printers of different models and firmware.
The output is rarely if ever centered in both x & y axis. We have only been able to use in production by relaxing the rules so that the text only need be within the boundaries of the label.
I also found that to support printing from the PDF view that the text positioning is well out of the label boundaries. I would be forced to create an additional three complex objects in the 'Y' axis. Needless to say this is quite messy.
I do appreciate your input, but your recommendation does not meet the requirements of my project.
I don't believe that Oracle Reports can do this task. I am thinking that BI Publisher can, and am doing "due diligence" before recommending a new reporting platform.
Thx again.
Gary

Report control alignment

I have a mini-election going on on my report. I'm making a report with the Report Generator. I'm calling references to place two waveform charts from the calling VI on the report using "Append Control Image to Report.VI". I want the 2nd chart to appear right below the first one, both aligned to the RIGHT. But they will NOT ALIGN! The top one is aligning left (I'll call this one 'Obama') and the lower one is aligning right (McCain). I'm using the align RIGHT constant on both. Has anyone else seen this? Report Generator is clunky and ugly enough without it going politically correct on me.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

Hi Paul,
Is the Report type HTML? If so try appending the the following text immediately after inserting the first image (using "Append Report Text.vi" )
<br clear=right>
After reproducing the mis-alignment you descrbed, I hunted around and found this link.
I'm not savy enough to know who to suggest is a stereotypical extreme liberal, so
Call this fix "The <YourFavoriteLiberalIcon> factor" - (because they make everybody else look like they're on the Right. )
Cheers.
Message Edited by tbd on 10-31-2008 01:34 AM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Adding Controls dynamically in the Infopath/Web form with dynamic controls

Hello,
The client requirement is to create SharePoint solution for the below image. A web form/Info-path form will be created where user can enter the details and data will be submitted. I am looking for a solution to implement the requirements in SharePoint .
if not possible then using customizations and SQL server.
User can enter the Title , Overview in the form , which we can make Single line and multiple line of Text. The problem is with third , fourth and fifth fields.
1) In third field , i.e. Qualification Summary , User can add/delete , dynamic text boxes..This can be achieved I think using repeating tables/sections in Infopath...How data will be saved in SharePoint columns as it is not fixed that how many
columns user can enter , how columns(static) will be created in the list ??
2) For fourth field , user will select one or many Project description title n descriptions which are there in the system..User will not write anything just select..But how many project descriptions they can select , again its not fixed..How
we can manage it in SharePoint List OR any custom solution ?
3) For fifth field , user will select one or many Awards which are there in the system.User will not write anything just select..But how many awards they can select , again its not fixed..How we can manage it in SharePoint List OR any custom
solution ?
Vipul Jain

>Lets say , the data for user selection is stored in two separate lists
secondary data connection is only for one list so you can get data from only single list by creating list connection. Later you can drag & drop that connection as repeating table or bind with any control so display in form. If you have mulitiple list
then you may use lookup column or would need to create two seperate data connection.
>Do you think its a right approach ?
multi selection listbox is helpful if requirement is select multiple records or filter records. You can almost achieve most of the requirement but still depends on business need. Ofcource some limitation is also there.
>I'm planning to propose a custom .net form
Of course custom form is always better than OOTB in some cases but i always prefer OOTB solution if my requirement is being achieved by it.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Create multiple dynamic control for each splistitem

Hi ,
I using SharePoint 2010 , in that am creating a custom visual webpart, to show in my home page.
In that i need to show my custom list's listitems such as 'ID' and 'Title' as dynamically label controls in my page.
When ever a new item added in that list , it will dynamically created labels and displyed in my webpart as last item.
can any one help me ?
regards,
RK

Hello,
You can't directly get newly created item in webpart but you can use CAML query to get item from list and show in webpart. Use OrderBy in query to get item in ascending or descending order. Here is ref code:
using(SPSite Site = new SPSite(SPContext.Current.Site.Url))
Using(SPWeb Web = Site.OpenWeb())
SPList list = web.Lists["ListName"];
SPQuery query=new SPQuery ();
query.Query = "<OrderBy><FieldRef Name='ID' Ascending='FALSE'/></OrderBy>";
query.RowLimit = 1;//get only single item if you want all items then remove this line
SPListItemCollection items = list.GetItems(query);
if(items.Count > 0)
foreach(SPListItem item in items)
string ID = Convert.Tostring(item["ID"]);
string Title = Convert.Tostring(item["Title"]);
Later bind this code with gridview.
http://programmingshare-thienle.blogspot.sg/2012/02/using-spquery-to-return-sharepoint-list.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Control alignment on tab pages

This is an appearance/aesthetic issue only. I am building a tab control with 8 pages. Each page has the same controls for different channels. How do I align/position a control on a page to be in exactly the same place as the same control on the page above/beneath it?
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

There is a way to allign the controls from diffrent tabs, it just takes two steps.
Use a set of dummy reference controls. One for top, one for left that are positioned off the tab control.
You allign the controls on one page to the dummy references, then repeat for the other tabs.
If you group like Dennis suggested the work is done in no time.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Control alignment

I would like to figure out how to align to control properly. I have tried to experiment but I can't see any logic to this.
When I select 2 controls how can I tell Labview which control is the one I want aligned to?
I seem to always get the opposite of what I'm trying to do, one time it will be control #1 next time it is control #2.
What am I doing wrong?
Ron

From my experience the controls will allign to the one that is in the Maximum position. For example if you do an align top, the controls will all align to the one that is the highest. If you have three or more controls spread out at different heights I don't think there is a way to align to a middle control in one step. You would have to align the higher ones first with align bottom and then the lower ones with allign top.

Create dynamic controls from JSON Response

I have a requirement to create a group of checkbox with lebels in a page from JSON response.
The JSON response is
    "data": [
            "CodeStatus": "Red"
            "CodeStatus": "Orange"
            "CodeStatus": "Green"
            "CodeStatus": "Yellow"
the design is:
the box is vertically scrollable, as it can have more color codes.
Can anyone suggest how to design the above?
If one can provide the implemantation code, that would be very good as I have very time to implement it.

Have a look at templates and for more complex scenarios factory functions, which give you the ability to dynamically create controls from model data.
SAPUI5 SDK - Demo Kit
Regards,
Jason

Creating Dynamic Controls with Drag-n-Drop

I'm creating an application that allows users to drag bubbles
from a panel on the left and drop them on a central workspace. I've
already coded the drag-n-drop operations for this process, and it
all works just fine. The user can drag one bubble (which represents
a category) and when dropped, a new similar control gets created at
the mouse coordinates. However, what I can't figure out how to do
is create that new control with dragEnter and dragDrop properties
of it's own. Obviously, if I was creating this control ahead of
time, then I would specify those events in the XML portion, but I'm
creating the control dynamically, so I have to figure out some way
to set that up. Something like...
var newBubble:Canvas = new Canvas();
newBubble.height = 50;
newBubble.width = 100;
newBubble.x = target.mouseX - xOffset;
newBubble.y = target.mouseY - yOffset;
newBubble.dragEnter = "doDragEnter()";
newBubble.dragDrop = "doDragDrop()";
However, when creating new controls, the dragEnter and
dragDrop properties aren't available. Any suggestions as to how I
can do this?

Thank you sooo much! I'll try it out immediately. I knew it
had to be something simple...

Dynamic control alignment

Similar Messages

Maybe you are looking for