Dynamic filepath in the Axis adapter

Hi,
I have a scenario where I attatch a PDF file in a ABAP proxy as a SOAP attachment, and I need to place this file on a harddrive with the path decided from the data in the message payload. In the "normal" fileadapter I can write to the adapter specific message attributes. Is there a similar possibility with the file transport protocol with the AXIS adapter?
Kind regards
Mikkel

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

Similar Messages

Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
If SNDPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
   SNDPRN = 200 , message has to go to http://20.180.26.16:8210/file/receiver
It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel. According to this note 1039369, I mentioned the following modules.
AF_Adapters/axis/AFAdapterBean --->                 afreq
AF_Adapters/axis/HandlerBean      --->                  xireq
AF_Adapters/axis/HandlerBean      --->                  dc
AF_Adapters/axis/HandlerBean       --->                 remover
AF_Adapters/axis/HandlerBean       --->                 trp
AF_Adapters/axis/HandlerBean        --->                xires
AF_Adapters/axis/AFAdapterBean    --->               afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc    -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
dc    --->          location.1 --->         context
dc     --->         value.1      --->        transport.url
remover    ---> handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp           ---> module.pivot --->     true
xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel
Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Kindly let me know if anyone has any idea what might be wrong?
Thanks
Deepthi

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

Using the Axis Framework in the SOAP Adapter

Hello experts,
I am currenty checking how I can easily manipulate sender and receiver details and how I could get attachments into XI.
I saw in the sap help that it is possible to use the AXIS framework from the SOAP adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
As usual, the documentation is of the same quality SAP usually provides.
So my first question would be: This is a moduke to be used from the SOAP adapter right? I am asking because they also wirte about the AXIS adapter and its metadata.
In oder to get it working, I created in the NWDStudio a library project, added my libraries (to the root directory) and deployed it via SDM. Deployment is succesful but its not working.
SAPHelp says I should check for a MessageServlet - I ask myself how that could appear suddenly just by packaging some axis libraries...?
I am using for that the ESA box (NW04s SP6) - I was not able to see whether there are some dependencies to the SP - are they?
Thanks for your support!
Helge

Helge,
Axis is outdated and has some issues ..use Apache Soap instead its much better and easy to use.
http://ws.apache.org/soap/
Regards
Ravi

Receiver Axis Adapter to 3rd party webservice

Hi,
My scenario is ABAP Proxy --> PI --> 3rd party webservice using Soap Adapter with Axis protocal.
I'm getting the following error when attempting to post to the 3rd party web service:
nested exception is: java.net.SocketException: Connection timed out:could be due to invalid address
We do have to go through a proxy server to go outside the firewall. I'm not sure if this may be the issue, but I don't even see where you can set this in the AXIS adapter.
Can anyone shed some light on the topic?
Thanks and regards,
Duke

Configured as stated below, and the issue was resolved.
How can I call some service over an HTTP proxy server?
The Axis's standard and adapter's HTTPSender and CommonsHTTPSender handlers recognize the java's standard network properties (http.proxyHost, http.proxyPort, http.nonProxyHosts) for HTTP proxy setting. Please check that these System properties are correctly set at the J2EE server's System properties page. For more information on how to set Java System properties, please refer to the J2EE server's documentation (SAP Note 710146 How to change J2EE Engine JVM Settings).
Thanks and regards,
Duke
Edited by: Duke on Aug 5, 2010 5:37 PM

Problem with Axis Adapter endpoint url in WSDL file.

Dear experts,
We are using PI 7.1 ehp1 with a SOAP to RFC scenarios using the Axis adapter.
We have the XIAxisAdapter as sender Communication Channel and the related Sender Agreement.
When i am looking into the WSDL file of the Sender Agreement than the endpoint contains ...location="host:port/ XISOAPAdapter /MessageServlet"... in stead of ...location="host:port/ XIAxisAdapter /MessageServlet"...
The url with "XISOAPAdapter " will not work. When i export the WSDL file and manually adjust the location to "XIAxisAdapter " everything works fine.
Is it possible to directly generate a correct WSDL with calling the url http://host:50000/dir/wsdl?p=xxxx?
Thanks in advance!
Best regards,
Joost Weghorst

Hi Sonya,
You can use configuration plan while deploying composite.
The configuration plan enables you to define the URL and property values to use in different environments. During process deployment, the configuration plan is used to search the SOA project for values that must be replaced to adapt the project to the next target environment.
Please refer this doc. for getting introduced to config plan.
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE10908
To deploy soa composite with config plan refer this doc:
http://docs.oracle.com/cd/E29542_01/dev.1111/e10224/sca_lifecycle.htm#SOASE85469

Axis Adapter Framwork Error

Hi
I am not able to access the axis adapter framework like i.e. (http://host:port/XIAxisAdapter/MessageServlet)
When am trying to access i am the following getting error.
Error:
404 Not Found
The requested resource does not exist.
Please provide me solution for this?
Regards
Osman Abdul Aziz Jabri

Hi Osman,
Kindly check this note:
#1039369 - FAQ XI Axis Adapter
It may helps with most common issues and doubts.
Regards,
Caio Cagnani

Alternative to Axis adapter

Hi All,
I was using the Axis adapter to connect with microsoft share point site with NTLM v1.
We were continuously getting 401 unauthorized error. After trying all the things we came to know that the support for Axis is not possible and there Are compatibility issues.
Can you please tell me what all other options are there to connect with sharepoint WSDL having NTLM v1 authorization.
Please let me know your comments.
Regards,
Rahul Kulkarni

HI,
Go with Java Proxy or WebService.
If it is a Java Proxy, in the proxy you can call Java Mail APIs so that , you can acheive the same.
Similarly you can achieve the same thru Webservice.
Hope this helps,
Regards,
Moorthy

JMS protocol with AXIS Adapter

Hi,
I need to configure the sender AXIS adapter to access SonicMQ JMS queues via Open LDAP. I looked at the AXIS Adapter documentation and no examples are provided to access SonicMQ via OpenLdap.
I do see the documentation to access the JMS providers directly by specifying the URL as "jms://ABCD"
but what i am looking for is to access the JMS objects via LDAP. The standard SAP JMS Adapter has the functionality to access JMS via LDAP. but i need to use AXIS adapter for WS-Security
Any help is greatly appreciated
Thanks
Chandra

Hi Chandra,
As far as I know, this is not directly supported via SOAP Axis Adapter. But one question which I would like to ask is are you trying to configure WS Security using Axis Handlers or you are trying to use the WS Security provided by SAP PI i.e. configuring Security Profile in the Sender Channel?
If you are trying to do it with Axis Handlers may be you can try using the Adapter modules specified in this link which can be used tto call Axis Handlers. <http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm>. Although documentation says that this is supported for SOAP adapter but you can still try as the message returned is still a valid AF message.
Best Regards,
Pratik

Error while passing URL Dynamically in SOAP AXIS adapter..!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the RCVPRN of Idoc.
If
RCVPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
RCVPRN = 200 , message has to go to http://10.190.25.16:8210/file/receiver2
RCVPRN = 300 , message has to go to http://10.190.25.16:8210/file/receiver3
I used the below UDF and it is working correctly and generating the URL dynamically .
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/SOAP", "TServerLocation");
conf.put(keyHeader1, a);
return "";
The value is coming in SOAP document as expected like below.
<sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30" SOAP:mustUnderstand="1">
<sap:Record namespace="http://sap.com/xi/XI/System/SOAP" name="TServerLocation">http://10.190.25.16:8210/file/receiver3</sap:Record>
</sap:DynamicConfiguration>
I used the below Configuration modules in receiver SOAP-AXIS adapter as suggested in Note 1028961.
AF_Adapters/axis/AFAdapterBean ---> afreq
AF_Adapters/axis/HandlerBean ---> xireq
AF_Adapters/axis/HandlerBean ---> dc
AF_Adapters/axis/HandlerBean ---> remover
AF_Adapters/axis/HandlerBean ---> trp
AF_Adapters/axis/HandlerBean ---> xires
AF_Adapters/axis/AFAdapterBean ---> afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
dc ---> location.1 ---> context
dc ---> value.1 ---> transport.url
remover ---> handler.type ---> java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover ---> namespace ---> http://sap.com/xi/XI/Message/30
trp ---> handler.type ---> java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp ---> module.pivot ---> true
xires ---> handler.type ---> java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel at the point java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender.
2009-03-02 15:23:44 Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
2009-03-02 15:23:45 Error Axis: error in invocation: (500)internal server error
2009-03-02 15:23:45 Error MP: Exception caught with cause (500)internal server error
2009-03-02 15:23:45 Error Exception caught by adapter framework: (500)internal server error
2009-03-02 15:23:46 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (500)internal server error: (500)internal server error.
2009-03-02 15:23:46 Error The message status set to NDLV.
Kindly let me know if anyone has any idea what might be wrong?
Note : The given URL is correct one because I cross checked by passing them normally by giving directly in adapter and they are all working and the message is going to receiver.
Thanks
Deepthi

Hi Stefan,
>> dc -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
>> dc ---> key.1 ---> write http://sap.com/xi/XI/System/SOAP TServerLocation
>> dc ---> location.1 ---> context
>> dc ---> value.1 ---> transport.url
>> Try read instead of write
When I tried with this, I am getting the below error "Connection refused ".
Success Axis: entering HandlerBean
Success Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
Error Axis: error in invocation: java.net.ConnectException: Connection refused
Error MP: Exception caught with cause java.net.ConnectException: Connection refused
Error Exception caught by adapter framework: ; nested exception is: java.net.ConnectException: Connection refused
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: ; nested exception is: java.net.ConnectException: Connection refused: java.net.ConnectException: Connection refused.
Success The message status set to WAIT.
It is going successfully when I tried sending directly. Looks like Dynamic Configuration is not working for SOAP-AXIS.
Any Suggestion?
Thanks
Deepthi.

Any one knows how to use Axis Framework in the SOAP Adapter Modules

How to use Axis Framework in the SOAP Adapter?
How to add custom handler modules?
http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
I went through the above link on help.sap.com. But still could not create a working example.
I have created a wc on some 3ed party app server using apaches axis. I am trying to call that web service from XI using SOAP receiver? I need to add some security related headers to the soap message, SO I am trying to use a handler. I want to know how to configure this handler in SOAP axis adapter module.
Thank you
Moni

Ravi ,
I am trying exactly the same. Hers is the scenario.
ABAP Proxy --> PI (7.0) SP 12 ---> WebService.
Since This is service is secured, means it is using OASIS web servie securyty user name token,
I am trying to use AXIS adapter. and I want to configure HandlerBean in which I want to use apache wss4j api to add the userNameToken. I am looking for some documentation on this.
I need to add SOAP action element too as I can not configure this one on the communication channel.
Thanks for any inputs in this regard.
Moni

Passing file name dynamically to the file adapter

Hi All,
I'm using a file adapter to create a file from the XML message after mapping in XI. The file name is given in the file adapter configuration. Is it possible to have the file name as a part of the message and pass it to the file adapter dynamically? Or is it possible to have the file name in some variable or something in XI (like a BPM variable) and pass it to the adapter for every message?
Does someone have any idea?
Thanks,
Sandeep

Hi Sandeep,
This is possible.
For creating filenames dynamically for your sender, you will have to crate a variable name ( eg: %VAR%) as you file name and then you will have to give the name of your file under variable substitution. Just check this link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
In the case of receiver file adapaters, you have 5 options for file creation like,
1.Create
2.Append
3. Add time stamp
4.Add Counter
5. Add Message ID
You can choose any of these options or you can do it dynamically from you payload. Just check out this help link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Hope this helps

How to create SDA file for using AXIS Framework in the SOAP Adapter

Hi experts,
I have the following question:
How I can create the SDA file aii_af_axisprovider.sda for using the AXIS Framework in the SOAP Adpater described in http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm ?
I have downloaded the files axis.jar, commons-discovery-0.2.jar, commons-logging-1.0.4.jar, commons-net-1.0.0-dev.jar and wsdl4j-1.5.1.jar. But how to create the SDA file aii_af_axisprovider.sda? Which tool I have to use for this? It is enough to compress these 5 jar-files in the sda file or need I further files with further information (meta information etc.)?
Thanks and best regards
Christopher

Hi Christopher,
Check this discussion if you have not checked already.
Re: NTLM Authentication dosent work with XI ?
Regards,
Ravi

Dynamic Filename in Receiver mail adapter is it possible without module?

Hi,
I need to send the file name in email adapter dynamically.Presently iam getting the filename as untitled.xml in the email .The keep attachments is checked in the mail adapter.
I need to rename the file based on the input field name and timestamp .for example if i get the input field xxxx then the filename should be set as xxxx + timestamp .xml.I tried to use the UDF for dynamic configuration but it didnot help me out.Please help me.
Thanks
Rajesh

Use below code snippet... It should work. If you want timestamp different change accordingly. Currently I do date followed by time as per my requirement.
SimpleDateFormat simpledatFormat = new SimpleDateFormat("yyyyMMdd");
Date date = new Date();
String datewithYear = simpledatFormat.format(date);
SimpleDateFormat simpledatFormat1 = new SimpleDateFormat("HHmmss");
Date date1 = new Date();
String datewithMs = simpledatFormat1.format(date1);
DynamicConfiguration conf = ((DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION));
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
String oldFileName=conf.get(key);
String valueNew;
if( oldFileName == null){
valueNew =oldFileNamedatewithYeardatewithMs+".xml";
//set the new filename
conf.put(key, valueNew);

Dynamic filename in receiver AS2 adapter in B2B Add-on

Hello Experts,
Can you please let me know how we can put dynamic filename in the receiver AS2 adapter for B2B Addon on SAP 7.4.
Thanks
Saurabh

Hi Ryan / Experts,
Let me explain you in more detail.
In the receiver AS2 Communication channel, if I keep the Filename field as blank as shown below, then in the Mendelson inbox folder, a file is generated with the name "ASJAVA_DX5" which is my business component name.
If I fill the filname field for example with "CONTRL", then in the Mendelson inbox folder, a file is generated with the name "CONTRL".
This is my requirement because, suppose i trigger this interface "first time", a file with static name (ASJAVA_DX5/CONTRL ) would be generated in the inbox folder. If I trigger this interface "second time", since the file already exists with same name, it is not overwritten and I cannot check the output of 2nd trigger . Contents are not overwritten.
To solve this problem + as a general requirement, I wish to have this name to be dynamic, atleast with date+timestamp.
Can you please help.

PI 7.11 Receiver SOAP (Axis) Adapter with MTOM (Attachments)

Hello,
Iu2019m trying to configure the Receiver SOAP (Axis) adapter for sending SOAP attachments via MTOM to a third-party webservice, but I'm not getting that PI transform the binary encode64 data in an payload element into a MTOM attachment (xop:include).
The configuration looks like this:
Transport Protocol: HTTP (Axis)
SOAP Version: 1.2
Encapsulation Format: MTOM
Keep Attchments: enabled
Payload Extraction: SOAP Body Child
First of all, could you confirm if this is supported?
Or Axis only supports MTOM for the transport protocol 'File (Axis)' like it seems refered in [Configuring the Receiver Axis SOAP Adapter|http://help.sap.com/saphelp_nwpi711/helpdata/en/45/a3c48c87cd0039e10000000a11466f/frameset.htm]
Can you please provide me some guidance here?
Thanks in advance!
Kind Regards,
Alexandre

Hello,
I am facing the exact same issue.
I can't seem to set the cookie in the http header after following the guide.
Cookie: WSL-credential=MyOwnCookie
I managed to set the SOAPAction though.
Anyone has any ideas?

Dynamic filepath in the Axis adapter

Similar Messages

Maybe you are looking for