Dynamic form with multiple master pages

I have a 7 pg form that has different data in the footer area. I placed the footer info on it's own separate master page and set the page to the corresponding page numbers. I moved the content area above the footer section so my content can flow to the next page properly. But my problem is since I set the Pagination area to "Place: Top of Page "Page 2" and the rest accordingly, I'm getting an almost blank page with the data from the previous page and the next page pushes to a separate page of its own for every page. Not sure how to make the form flow continuous, this is my first time having to do a form this way. Typically I set the pages when I'm done to "Following Previous" instead of "Top of Next page" in the Pagination Place field for each section and everything works fine then. I've never had to deal with a different master page for each page in the form.
Any help or suggestion would be greatly appreciated.
Jim

If you have 7 pages with different footers, wouldn't it be easier to have the footer also part of the body page instead of Master page.
Unless you are adding dynamic content at runtime, you can keep the footer in the body page itself. That way you can avoid multiple master pages.
If you still have issues, you can share the form, so I can have a look at it.
Thanks
Srini

Similar Messages

  • Rearrange pages when printing adobe form with multiple master pages

    Hello!
    Good day to you all.
    I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
    1st master page: a
    2nd master page: b
    3rd master page: c
    4th master page: d
    all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
    What happens is that the preview/print shows (example: 3-page item)
    a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
    What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
    a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
    This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
    Thanks a lot in advance!
    Best Regards,
    abap_peer_dangs

    Hi,
    Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
    Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
    Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
    Let me know if this suffice, I can try with a local file and send you the script.
    @ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
    Cheers,
    Sai.

  • Can I combine 2 forms with different master pages?

    I have two forms that need to be in one PDF together, but have different master pages. The forms are flowed, so the master pages are necessary to keeping the header and footer content in place. Is there any way to combine two forms?

    Hi guys, I figured out a kinda fudged answer.
    You can make as many master pages as you need, the problem is getting them to appear on the correct pages. I couldn't get the flowing first page to be as long as it needs, then start using the second master page for the next section. If anyone knows how to do that, I still need to know.
    How I fudged this was I put the entire form on the master page in a table to position it correctly and keep it flowed. Then I set the master page to a minimum occurance of 1. - There you go. Not the right answer, but it works.

  • Dynamic Form - Barcode on master page, only contents on specific page to be populated on barcode

    We have a dynamic form that grows as required. We have one barcode on the master page. As form grows to next page only the contents on that page (ie page 2) must be on the barcode on page 2 and page 1 content only on page 1. But if the form goes back to normal then the contents must not be on the barcode anymore.
    Could anyone assist on this problem please?

    Hi Brad ,
    For your issue, you can view the Upgrade Status page in Site Settings to verify that upgrade has succeeded for a site collection.
    To view upgrade status in Site Settings 
    1.Verify that the user account that performs this procedure is a site collection administrator.
    2.On the Site Settings page for the site collection, in the Site Collection Administration section, click Site collection upgrade.
    3.On the Site Collection Upgrade page, click Review Site Collection Upgrade Status.
    4.The Upgrade Status page for the site collection is displayed.
    For more information, see
    Manage site collection upgrades to SharePoint 2013
    Also you can  go to _layouts/15/reghost.aspx (Site Settings -> Site Actions -> Reset to site definition) and reset the master page gallery to site definition version.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Fillable form with multiple pages

    I have a fillable form with multiple pages. However, when I save it and open it, it tabs to the end of the first page and will go back up to the top of the first page again. It won't tab to the second page. Instead, the user will have to click there cursor into the first field of the second page, tab through that, and repeat this process from page to page. If the person doesn't know there are multiple pages, they may believe they have finished the form once they get to the bottom of the first page, hit tab, and it takes them back up to the first field on the first page again. How can I make it go from the last field on the first page, tab, and first field on the second page?

    Thanks for the reply. Since my post to this topic I discovered some things about tabbing. With out adding another master page but just keeping the one and making sure that it's occurance is set to a minimum of one and including master page in the numbering it will work as long as the order of fields in the hierarchy tab matches the order in the position of the fields.
    I have a subForm that has a row of fields starting with a button then several text fields. I couldn't tab to the next page because the button was at the bottom of the hierarchy and it wasn't until I moved it to the top that I could finally tab to the next field on the next page. I also discovered that with a one page dynamic interactive form that has some expand able text fields in it and when the field expands so that any fields are pushed to a new second page tabbing seems to not work. In other words when I tab out of that field that is suppose to expand and a new page is added to the form the tabbing quits and in order for it to resume I have to click in a field and from then on it work even if it gets to where a third page and so forth is added. It is just when a one page (in my case) form turns into multiple pages for the first time.
    Hope that makes sense.

  • Master with multiple details page, is there an example out there?

    Many hints and suggestions can be found on this forum about building a page with a master with multiple details page. But is there a working example somewhere? It looks quite complicated to me.
    Also I would like to know if it is because of my Oracle Forms background that I miss the possibility of building this kind of forms in application express. Are there other ways to setup the pages so that you can do without them?
    thanks Rene

    Let me elaborate on my requirements a bit:
    The form I want to create should look like this:
    Master
    Atrtibute_1
    Attribute_2
    Attribute_3
    Attribute_4
    Details_1 Add Delete
    [] item1 (read-only)
    [] item2 (read only)
    Details_2 Add Delete
    [] item1 (read-only)
    [] item2 (read only)
    So basically it should be possible to maintain several lists of items that belong to the master record. Checkboxes allow the user to select records for deletion. The Add button shows a pop-up window that lets the user select an item to add.

  • How to create a JClient form with one master block & multiple detail block?

    Hello,
    I am using Jdevelopver 10.1.2
    I want to have a JClient Form with one master table A and two detail tables B, C.
    But in the JClient Form wizard, I can only create a one master with one detail relationship. Can I create multiple details in that wizard ?
    Thanks
    Stephen

    Create a JPanel based on the second detail table with the wizard and add manually the JPanel to the Master-detail Form.
    Regards
    Fred

  • Create master document form with multiple sub form

    Hi Dear;
    how can i create a master form with multiple sub form using screen painter?
    best regards;

    Hi Dany,
    Do you mean a form connected to a MasterData Object with multiple childs?
    If so:
    1. Create a new ScreenPainter form;
    2. Add a Folder item for each of the childs;
    3. Add a new matrix to each of the childs and change their PaneLevel to from 1 to N (N = number of childs you have);
    If your code you then need to catch item pressed event for the Folder Items and change the form's Pane Level accordingly.
    Regards,
    Vítor Vieira

  • How to design a form with multiple lang(Arabic and Eng) in a page

    Hi All,
    Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
    Pls help me how to design
    Thanks in advance.
    Regards,
    Jayakar

    I am not sure how you can have two different languages inside the same PDF.
    Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
    Anotherway,
         Have same sections in both the languages and hide and unhide based on the user selection of the language..
         if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
    Thanks
    Srini

  • Problem in displaying dynamic table placed in master page

    Hi all,
    I have placed a dynamic table in my master page. When the page overflows the dynamic table is shown only in 1st page. I want this table to be shown in every page. Please help me solve this.
    Regards,
    Devaiah

    hi,
    Thank you all for your reply. But i cannot keep the table in body page as i want this table to be displayed in every page in the header.  Actually i am displaying an address through this table.
    I have moved the content area in master page to center and reduced its size and in the body page i have placed a table which will display the report. When this table overflows to next page all the contents in master page are shown except for the address table in master page. I am not sure whether i am doing it the right way as i am bit new to adobe forms.
    Please let me know where am i going wrong. Also please suggest me some alternative method ( if any ) to display the address in every page if the above method is not feasible.
    Regards,
    Devaiah

  • Apply multiple master pages to multiple layers

    I have a document that has multiple layer and I need to apply a different master page to each layer.
    Layers are as follows and in this order:
         USA Pricing
         No Pricing
         Euro Pricing
         Yen Pricing
         and so on.
    I have a master page created for each versions layer. I lock all layers except the USA layer and apply the USA Pricing master to that layer it looks great.
    So I lock that layer and unlock the next layer and apply the applicable master to that layer and so on but, even though the other layers are locked what ever master
    I last applied is the one that sticks to all layers.
    How do you get the master page to stick to each layer without using the Master page override to each layer and making it become part of the page?
    If you do that and then you have a change to the Master page on a specific layer/version you have to edit every page and can not simply make a global change on the applicable master!!
    Thank you in advance for any help that can be given.

    Do you mean that only one master page can be applied per page and that it is automatically applied to all layers of that page?
    "so it sounds like you need to create a new master page with the attributes you need for each layer included in one place."
    I don't understand what you mean by this? I have created multiple master pages that have everything I need on them to be applied to each layer!
    They just don't stick to the individual layer! Maybe it the "included in one place" part of your reply that will work but, I don't understand what you mean by that!

  • I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

    I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

    I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

  • Is it possible to create a form with multiple form fields on a single line?

    Is it possible to create a form with multiple form fields on a single line?  I can't find anything in the documentation or a template that does this.
    I am trying to create a "documents received" checklist with a check box on the left margin, a date-received field to the right of the check box and and a description of the document (Formatted Text) on the far right.
    In the past I have entered the Fixed Text with a word processor, published it to a PDF file, then added the check box and date fields with the Acrobat Forms editor.  I would prefer to use FormsCentral if it is possible.

    We now support multiple fields on one line. This post provides a brief overview.
    Give it a try and send us your feedback.
    Sorry it took so long.
    Randy

  • Smart form with 2 different pages

    Hi Experts
    I have a requirement, I need to develop a smart form with 2 different pages, and each page has different data and presentation of the data also is different.
    In the first page I need to display the contract data with the line items and amounts and in the second page I need to display the partner details with their contact details. From second page onwards it may go further based on the partners exists for that contract.
    Plesae advice me best possible way to achive this.
    Thanks
    Praveen

    Hi Praveen,
    Create two Pages:
    First Page:
    In general Attributes section- Keep page2 as next page
    Create Main window and under that
    Keep the text elements for contract data of line item and amounts as required
    Second Page:
    In general Attributes section- Keep page2 as next page
    create main window and under that
    get all the partner details of line item into an internal table(using program lines node).
    Now use 'Tables' node which behaves as loop for this internal table (so that it continues further if it contains date more than 1 page)
    And display the values in smartform using Text node
    Regards,
    Swarna Munukoti.

  • How to build a form with multiple tables in oracle application express

    Hi everyone,
    I have got problem in building a form with multiple tables.I have a main table with (20) columns and this main table is related to the other tables with the primary key-foreign key relation ship.My requirement is i have to build a form which has fields from many tables and all the fields are related to the main table using (ID) column.In that form if i enter ID field i have to get information from differnt tables.
    Please help me to solve this (building a form with mutiple tables)
    Thank you
    sans

    Sans,
    I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
    This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

Maybe you are looking for