Dynamic Form - Barcode on master page, only contents on specific page to be populated on barcode

We have a dynamic form that grows as required. We have one barcode on the master page. As form grows to next page only the contents on that page (ie page 2) must be on the barcode on page 2 and page 1 content only on page 1. But if the form goes back to normal then the contents must not be on the barcode anymore.
Could anyone assist on this problem please?

Hi Brad ,
For your issue, you can view the Upgrade Status page in Site Settings to verify that upgrade has succeeded for a site collection.
To view upgrade status in Site Settings
1.Verify that the user account that performs this procedure is a site collection administrator.
2.On the Site Settings page for the site collection, in the Site Collection Administration section, click Site collection upgrade.
3.On the Site Collection Upgrade page, click Review Site Collection Upgrade Status.
4.The Upgrade Status page for the site collection is displayed.
For more information, see
Manage site collection upgrades to SharePoint 2013
Also you can go to _layouts/15/reghost.aspx (Site Settings -> Site Actions -> Reset to site definition) and reset the master page gallery to site definition version.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

Dynamic form with multiple master pages

I have a 7 pg form that has different data in the footer area. I placed the footer info on it's own separate master page and set the page to the corresponding page numbers. I moved the content area above the footer section so my content can flow to the next page properly. But my problem is since I set the Pagination area to "Place: Top of Page "Page 2" and the rest accordingly, I'm getting an almost blank page with the data from the previous page and the next page pushes to a separate page of its own for every page. Not sure how to make the form flow continuous, this is my first time having to do a form this way. Typically I set the pages when I'm done to "Following Previous" instead of "Top of Next page" in the Pagination Place field for each section and everything works fine then. I've never had to deal with a different master page for each page in the form.
Any help or suggestion would be greatly appreciated.
Jim

If you have 7 pages with different footers, wouldn't it be easier to have the footer also part of the body page instead of Master page.
Unless you are adding dynamic content at runtime, you can keep the footer in the body page itself. That way you can avoid multiple master pages.
If you still have issues, you can share the form, so I can have a look at it.
Thanks
Srini

Problem in displaying dynamic table placed in master page

Hi all,
I have placed a dynamic table in my master page. When the page overflows the dynamic table is shown only in 1st page. I want this table to be shown in every page. Please help me solve this.
Regards,
Devaiah

hi,
Thank you all for your reply. But i cannot keep the table in body page as i want this table to be displayed in every page in the header. Actually i am displaying an address through this table.
I have moved the content area in master page to center and reduced its size and in the body page i have placed a table which will display the report. When this table overflows to next page all the contents in master page are shown except for the address table in master page. I am not sure whether i am doing it the right way as i am bit new to adobe forms.
Please let me know where am i going wrong. Also please suggest me some alternative method ( if any ) to display the address in every page if the above method is not feasible.
Regards,
Devaiah

Rearrange pages when printing adobe form with multiple master pages

Hello!
Good day to you all.
I have an issue in regards with printing my adobe form with multiple Master pages. I have 4 master pages:
1st master page: a
2nd master page: b
3rd master page: c
4th master page: d
all with different headers and footers all having the same contents (items). I don't have issue with one page content (it just prints 4 pages with different headers and footers). The issue comes out once the items exceed 1 page.
What happens is that the preview/print shows (example: 3-page item)
a1-a2-a3-b1-b2-b3-c1-c2-c3-d1-d2-d3.
What i need is to print these such that all 1st pages of the 4 master page to be printed first, then all the 2nd pages, then all 3rd pages. Please see below:
a1-b1-c1-d1-a2-b2-c2-d2-a3-b3-c3-d3
This is because we will be using carbonless copy paper during printing and it's possible that it would be printed on batch jobs. Please suggest ways to do this.
Thanks a lot in advance!
Best Regards,
abap_peer_dangs

Hi,
Is that requirement of multiple pages as groups only at the time of print or at print preview also...?
Can you have a Print button on this screen or you should be using the Abobe toolbar's Print button..?
Well if this on a click of a button in the form and the requirement is only at the time of print and not on print prieview I can have a JS script which does this...
Let me know if this suffice, I can try with a local file and send you the script.
@ Chris: I didn't understand what do you mean by reported, I was eager to hear and learn a solution from you may be a new approach which I am not aware of ...?
Cheers,
Sai.

Can I combine 2 forms with different master pages?

I have two forms that need to be in one PDF together, but have different master pages. The forms are flowed, so the master pages are necessary to keeping the header and footer content in place. Is there any way to combine two forms?

Hi guys, I figured out a kinda fudged answer.
You can make as many master pages as you need, the problem is getting them to appear on the correct pages. I couldn't get the flowing first page to be as long as it needs, then start using the second master page for the next section. If anyone knows how to do that, I still need to know.
How I fudged this was I put the entire form on the master page in a table to position it correctly and keep it flowed. Then I set the master page to a minimum occurance of 1. - There you go. Not the right answer, but it works.

No "presence" Attribute for Master Pages or Content Areas?

Is it true that there isn't a .presence attribute for master pages and content areas? I have a form with multiple master pages, and based on certain criteria, I'd like to not display the master page.
This master page has 1 content areas. One is a header area. The rest of the page is content area 2. It is blank. I have a conditional breakpoint that sends line items from a table to content area 2 if I have more than 7 line items.
If I have 7 or fewer line items, I'd like to hide this master page, but LiveCycle doesn't seem to think you should ever hide an entire master page. If I could hide the top content area, then at least the page would print blank.
I can't wrap content areas in subforms. If I could do that, then I could hide the subform.
Thanks!!

My problem is I have page 1 with fields in the header, then there are line items attached to a database table. There could be 1 line item or 200. I can print up to 7 line items on the first page and then a footer must appear on just page 1.
If there are more than 7 line items, I continue to another page. I have to have a bunch of header fields at the top of this continuation page. The line items continue under this. If another continuation page is needed, then the header info appears at the top and then the line items continue. This goes on until all line items are displayed.
I have to use a conditional breakpoint in this line item table so I can tell it to go to a content area under the header on the continuation page. I can't have the line items continue at the top of a page because I need that header.
I define the content area under the content area for the header on the continuation page. I have only been able to define content areas on master pages.
I have more than 1 master page. Page 1 and the final page are on 1 master page and they must always print. The line item continuation page is another master page with 2 content areas (header and line item continuation).
If I have 7 or fewer line items, the continuation page is not needed. I need to be able to hide or display this page dynamically based on the number of line items from the database.
I can show some examples when I get back to work.
Thanks!

Page Number Disappesrs when click on Reset button in Dynamic Form

Dear all,
In dynamic forms I have taken Page n of m field outside the content area in master pages.I have added the reset button in body pages of the form.In the pdf When I click on Reset button the page nos are disappearing along with the other data.
I want the page no should not disappear.How can I get rid of this problem. If any body can please help me.
Thanks a bunch in advance
Regards
Rakesh

Firefox checks on the server if the file has been modified if you use the back button.<br />
If the page was requested by sending post data to the server then Firefox sends that post data and asks for confirmation.<br />
You can try to use the tab history of the Back button skip sites that require sending post data.
You can also try if it works if you set to never check the server by setting the browser.cache.check_doc_frequency pref to 2.
*http://kb.mozillazine.org/browser.cache.check_doc_frequency

BC Blog has affected my master page form

After publishing my blog from Business Catalyst I noticed that the form on the blog page (actually a master page element) was affected.
The submit button which I left blank and just have as an invisible button over a small graphic of my own, has now got the 'submit' text written over the top. Even though this form is a Master Page element it is only affected on the blog page making me think this has been effected by the BC Blog.
(see attached image, in the red squared out area)
Can anyone help me get rid of this submit text?

Hi,
Yes, it is possible. First check if you have multiple Master Pages, if so you will need to check the pagination and make sure that the necessary objects are on each Master Page.
In addition, if the heading is dynamic (changes at runtime), then select the object on the Master Page and in the Object > Binding tab, set the data binding to 'global'.
This should work,
Niall

Error in displaying master page content in overflowing pages

Hi All,
I am having a master page with logo, bill to party address and item details. The logo and bill to party are in a separate sub form of the master page and the item details are in the design view of the page.
My problem is when the item details overflow to next page, the logo and bill to party address are not appearing in the next page with the item details.
Kindly help me to resolve this issue. I read many post telling the master page content will be repeated on all subsequent pages. Dont know why it fails for me . Am i missing something. Please help.
Thanks and Regards,
Vadivu

Hi,
My issue got resolved, i changed my master page overflow to the same master page. Its is displaying the details on the next page when items are over flowing.

Dynamic field in master page header?

Is it possible to put a dynamic field in a master page header that will either pull from a hidden text field added to each subform (e.g., appID) or pull in the title of the subform itself? I have a number of variable-sized subforms that need the same header and footer, with the only distinct element being a different number at the top.
I've been looking for a standard variable or wildcard that can be used to dynamically reference an object at the same level in multiple subforms, but so far have not been able to find what I need.
Hierarchy:
form1
     masterpage
     subformApp1
     subformApp2

Hi Sankar,
Create on eattribute of type String and bind to title property of page header,
and your WDDOINIT or any event write code to set title for PG header,
You are using different buttons, use this code in your buttons and change text.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->Element_context.
DATA lv_pg TYPE wd_this->Element_context-pg.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
data pg1 type string.
pg1 = 'selected the record'.
lv_pg = Pg1.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
In button 1..
lv_pg = 'Enter the entries'.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
Cheers,
Kris.

How to synch values of fields (cbo & text) in Master Pages section in dynamically created pages?

HI folks,
I have a requirement for a form that has a common master page with a checkbox and text field in it.   The document is basically a table that dynamically adds rows as the user adds entries.   When the first page is full, a second page is dynamically created and the Master page format (including the checkbox & text field) applied to it.
When the user sets the checkbox on one page and/or adds text, all of the checkboxes on all of the dynamically created pages (in the master section) and all of the text boxes need to change to show the same values.
However, I can't figure out how to address the fields on the other pages.   The number of pages changes from user to user, so I can't address them with a static reference.
Does anyone know how to keep these fields in synch?
Thanks in advance!

It woudl be easier to show than to explain it ...can you share the file? You can send it to [email protected] Include a description of the issue with your email please.
Paul

Adobe Interactive Form - Master Page vs. Body Page

Hi
Could someone please explain to me what
1) the difference between the Master Page and Body Page and when to use the Master page
2) the reference object and when to use it
I am new to this and I cannot find any answers related to this in SDN
Thanks

hi,
The master and body pages represent the canvas on which you build your form design.
Master Page
Every form design contains at least one master page that LiveCycle Designer creates automatically. Master pages are responsible for formatting body pages. They help to facilitate design consistency because they can provide a background and layout format for more than one of the body pages in a form design.
master pages define the orientation and dimensions of body pages. You can use master pages to define these aspects of a form design:
1.Page size and orientation
2.Headers and footers
3.Watermarks and company logos
Each master page is created with a default content area that covers the whole page. You can add text, images, and other boilerplate objects to a master page. These objects are displayed on all of the body pages that the master page is responsible for formatting.
Body pages
Body pages represent the pages of a form. Each body page derives its page size and orientation from a master page, and by default, each body page is associated with the default master page that LiveCycle Designer creates. Each body page is created with a default subform that covers the whole page.
If your form design contains more than one master page and body page, you can choose which master page to assign to a body page.

Dynamic forms and collection.

Hello,
In one of your postings you’ve explained that the collections won't work with dynamic forms. The collection will only "see" the first instance of the subform. You've provide link to the sample, but it does not longer work :
http://my.adobe.acrobat.com/p52549088/.
This sample shows how to manually encode data into barcode from a subform that repeats. Can you please provide a working link or sample? Is there any other suggestion on how to link barcodes on dynamic forms?
Regards,

Hello Dave,
I can't say I've seen issue 1 before and would recommend contacting support.
For item 2 I would suggest wrapping your 'line' of text in a subform then creating a script to use the setInstance method for that subform.
Let's say you had a subform named "TextLine" (which contained a text field), a numeric field called "NumberOfLines" and a button called "SetLines". You would likely want to have javascript code on the SetLines button click event much like:
TextLine.instanceManager.setInstances(NumberOfLines,rawValue);
You will want to save this form as a Dynamic PDF before previewing and you will want to ensure that TextLine allows for more than one occurence (found under Object - Binding, Allow Subform to Repeat when you have that subform selected).
You may also want to put in some validation against the NumberOfLines field to ensure it has a value.
I hope that helps.

Repeat Text Field Value on Master page

This might be a really simple question. I have a form with two master pages. The second is applied to all but the first page. On the second master page I have a text field that I populate with user entered data from a text field. I want this value to show on all pages after the first page (page 2 to n). It shows up with the value on page 2, but all the rest have a blank value. Do I need to script something to make it repeat for all pages? Any help would be appreciated.

The simpliest method would be:
Under the Object tab, select Binding, and change the Default Binding to Global. The TextFields you create must have the same name, and Global binding will populate all the fields.

Click a button to change the Master Page

Hi everybody,
I have a LiveCycle Designer question…
Is it possible to have a button onclick event to change the Pagination “Place” property of a subform? I would like to change the Master Page that a subform is placed on using a script on an onclick event. I’m not sure if this is possible… wondering if you knew a way…
Thanks a lot.
Jing

Hi Jing,
I don't think it is easy, here is a sample that allows you to choose the page size and orientation (which are different master pages), Adobe LiveCycle Designer Cookbooks by BR001: Season Planner (or Year Planner) PDF Template
It effectively defines the form against each master page and recalculates the widths and heights when the page selected is made, but I don't know of another way.
Regards
Bruce

Dynamic Form - Barcode on master page, only contents on specific page to be populated on barcode

Similar Messages

Maybe you are looking for