Dynamic groups at runtime

Post Author: Adam20002
CA Forum: .NET
How can i allow the user to change what is group criteria is used at run time. I am using ASP.Net and Visual Studio 2005. I was looking at the ReportDocument.DataDefinition.Groups collection but that is read only.
Is this possible?

Post Author: sarasew
CA Forum: .NET
generally you have to pick one and only one data type for a formula, group, etc. i got around it by passing one parameter to my report telling me what field i want to group on. then in the report i made two formulas and grouped the report on both.
the first formula {@group1} is:if {?group} = "text" then {table.textfield}else " "
the second formula {@group2} is:if {?group} = "date" then {table.datefield}else Date (1950, 1, 1)
then you suppress group 1 if {@group1}=" " and suppress group 2 if {@groups2}=Date (1950, 1, 1). This way only one of your groups shows up.

Similar Messages

Use Granfeldts Create Object to create dynamic groups

Trying to use Sorens Granfeldts, Create Object WF activity to create dynamic groups.
In a standard function evaluator activity I generate the Filter as [//WorkflowData/Filter]
The "string" I set it to is:
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect" xmlns="http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Person[ObjectID
= /*[ObjectID = '8dfcb5e8-ff01-400c-8ca7-2a0002d2d2d4']/ComputedMember]</Filter>
In the CreateObject activity I then just have [//WorkflowData/Filter],Filter among the initial values.
The creation works if I remove this attribute so the rest of the attributes seems to be working.
The creation fails however end I get the error below in the Forefront Identity Manager event log.
System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.ResourceManagement.WFActivities.Resolver.GetDisplayStringFromGuid(Guid id, String[] expansionAttributes)
   at Microsoft.ResourceManagement.WFActivities.Resolver.ReplaceGuidWithTemplatedString(Match m)
   at System.Text.RegularExpressions.RegexReplacement.Replace(MatchEvaluator evaluator, Regex regex, String input, Int32 count, Int32 startat)
   at System.Text.RegularExpressions.Regex.Replace(String input, MatchEvaluator evaluator)
   at Microsoft.ResourceManagement.WFActivities.Resolver.GetStringAttributeValue(Object attribute)
   at Microsoft.ResourceManagement.WFActivities.Resolver.ResolveEvaluatorWithoutAntiXSS(String match, ResolverOptions resolveOptions)
   at Microsoft.ResourceManagement.WFActivities.Resolver.ResolveEvaluatorForWithAntiXSS(String match, ResolverOptions resolveOptions)
   at Microsoft.ResourceManagement.WFActivities.Resolver.ReplaceMatches(String input, Boolean useAntiXssEncoding, ResolverOptions resolveOptions)
   at Microsoft.ResourceManagement.Workflow.Hosting.ResolverEvaluationServiceImpl.ResolveLookupGrammar(Guid requestId, Guid targetId, Guid actorId, Dictionary`2 workflowDictionary, Boolean encodeForHTML, String expression)
   at Microsoft.ResourceManagement.Workflow.Activities.ResolveGrammarActivity.Execute(ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
   at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
   at System.Workflow.Runtime.Scheduler.Run()
Have anyone used this WF activity to create dynamic groups and can tell how to set the Filter?

Hey Kent!
I did the same thing, with Søren`s Create Object WF. I did it like this on the filter part:
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect" xmlns="http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Person[(Department = '[//Target/ObjectID]')]</Filter>,Filter
The whole thing looks like this:
(I use Function evaluator to generate a AccountName for groups based on a clean version of DisplayName).
[//Target/DisplayName],DisplayName
SEC_[//WorkFlowData/CleanAccountName],AccountName
[//Target/Manager],Owner
Security,Type
DOMAIN_STRING,Domain
Universal,Scope
[//Target/DisplayName]_SecGroup,Description
[//Target/Manager],DisplayedOwner
None,MembershipAddWorkflow
True,MembershipLocked
[//Target/CleanAccountName],MailNickname
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect" xmlns="http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Person[(Department = '[//Target/ObjectID]')]</Filter>,Filter
Regards, Remi www.iamblogg.com

Dynamically group records by date

I am attempting to create a report that will dynamically group records into a set number of date buckets. This is similar to grouping records by a date field and setting the days, weeks, months, etc property but instead of grouping by a set time span I want to a specific number of date groups regardless of date span. So say i have records where the first date is today at 1am and the last record is today at 9 pm. I want the data grouped into 10 groups and the time calculated for that group based on total time span / 10. The first group would be 1AM to 3AM, the second would group 3AM to 5AM, etc.. The reason I am doing this is for a chart that displays record counts over time but the overall timespan will never be known until runtime. Setting the chart for hourly or weekly doesn't work because if the user runs the report over a year the dates will be illegible.
Thanks in advance!

Well this SHOULD be easy. But leave it to CR make not...
You can start by finding the minimum & maximum dates within your range:
Local DateTimeVar MinDate;
MinDate := Minimum({Table.DateField})
and
Local DateTimeVar MaxDate;
MaxDate := Maximum({Person.ModifiedDate})
Then figure out what the the interval would be if the span is broken down into 10 equal parts"
DateDiff("n", {@MinDate}, {@MaxDate}) / 10
From there just use a formula to segregate each records into the appropriate groups:
EvaluateAfter({@Interval});
IF {Table.DateField} >= {@MinDate}
    AND {Table.DateField} <= DateAdd("n",{@Interval}, {@MinDate}) THEN 1 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval}, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 2, {@MinDate}) THEN 2 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 2, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 3, {@MinDate}) THEN 3 ELSE
IF{Table.DateField} > DateAdd("n",{@Interval} * 3, {@MinDate})
    AND{Table.DateField} <= DateAdd("n",{@Interval} * 4, {@MinDate}) THEN 4 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 4, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 5, {@MinDate}) THEN 5 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 5, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 6, {@MinDate}) THEN 6 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 6, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 7, {@MinDate}) THEN 7 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 7, {@MinDate})
    AND{Table.DateField} <= DateAdd("n",{@Interval} * 8, {@MinDate}) THEN 8 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 8, {@MinDate})
    AND {Table.DateField} <= DateAdd("n",{@Interval} * 9, {@MinDate}) THEN 9 ELSE
IF {Table.DateField} > DateAdd("n",{@Interval} * 9, {@MinDate})
    AND {Table.DateField} <= {@MaxDate} THEN 10
This is where CR drops the ball... IMHO... it WON'T allow you to to group by a formula field that uses an aggregate in the formula (in this case Minimum & Maximum)... It will however allow to to graph on it, which I assume is what you are actually trying to do. If anyone knows a way to work around the grouping issue, I'd love to know it myself.
HTH,
Jason

How to generate a PDF 417 Barcode by assigning a dynamic value at runtime?

PDF 417 Barcode Description given in the Livecycle Designer 8.2
: PDF 417 Non-Scriptable Barcode. Value must be assigned to this barcode at design time, and this barcode will not update after form object value changes.
And my question is how to generate a PDF 417 Barcode by assigning a dynamic value at runtime?

All the information you described points to the problem that reports seems can't generate to a file which already exist. You can verify that by simply doing
r30run32 C:\AC_REPORT.REP DESTYPE = FILE DESFORMAT = PDF BATCH = YES' desname=c:\temp\ac_report.pdf
several times. If first time the report is successfully generated in c:\temp\ac_report.pdf, but not the second, third time, then it looks like there is a bug on reports r30run32 executable.
You may try to find any latest patch for Reports 3.0 to see if patch can solve you problem. But keep in mind Reports 3.0 is de-supported, you are better to move to 6i or 9i reports.
Thanks,
-Shaun

LMS 2.6 dynamic groups with wildcards

Is is possible to build dynamic groups in RME using wildcards or regular expresions? The rules that I want to define would look similar to the following:
Device.System.Name StartsWith "SW" AND (
Device.System.Name contains "........X" OR
Device.System.Name contains "........Y" OR
Device.System.Name contains "........E" OR
Device.System.Name contains "........Z")
Where the device name begins with SW and there is either an X, Y, E or Z in the 8th position of the device name.

This is not possible. The ruleset matching is based only on the operators available for the given property.
The best workaround I can give you is to apply your first rule, then manually adjust the membership list based on the other rules. The downside of this is that the membership list would require modification when you add new devices.

DIP fails loading dynamic groups into OID

Hello,
we're trying to load groups from OeBS into OID and associate them via dynamic groups feature with user records that was loaded earlier as follows:
personid=18630,cn=dev,cn=hrsyncusers,cn=users,dc=ic,dc=lan
orcltimezone=Asia/Yekaterinburg
displayname=NOT ASCII
employeetype=NOT ASCII
givenname=NOT ASCII
postalcode=628484
orcldateofbirth=19610404000000
orclgender=F
departmentnumber=342
uid=18630
mail=HRNULL
cn=NOT ASCII
initials=NOT ASCII
street=NOT ASCII
employeenumber=4824
middlename=NOT ASCII
l=NOT ASCII
orclhiredate=20051107000000
sn=NOT ASCII
personid=18630
c=Russia
title=NOT ASCII
objectclass=inetorgperson
objectclass=person
objectclass=organizationalperson
objectclass=orcluserv2
objectclass=kapitalperson
objectclass=country
objectclass=residentialperson
objectclass=locality
objectclass=top
Among other attributes each user entity has 'departmentNumber' that indicates number of his/her department.
Now trying to load list of departments as dynamic groups with the following config
files:
*** DevHRAgentGroups.cfg ***
[SELECT]
SELECT psv.version_number
, pos.name hierarchyname
, hou.organization_id depno
, poe.organization_id_parent parent_id
, REPLACE(hou2.name, '"') parentname
, poe.organization_id_child child_id
, REPLACE(hou.name, '"') orgname
, ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(depar
tmentnumber='||hou.organization_id||')' ldapuri
, hrl.meaning org_type
FROM per_organization_structures pos
, per_org_structure_versions psv
, per_org_structure_elements poe
, hr_all_organization_units hou
, hr_all_organization_units hou2
, hr_lookups hrl
WHERE pos.business_group_id = psv.business_group_id
AND pos.organization_structure_id = psv.organization_structure_id
AND pos.primary_structure_flag = 'Y'
AND psv.date_to IS NULL
AND poe.org_structure_version_id = psv.org_structure_version_id
AND poe.business_group_id = hou.business_group_id
AND poe.organization_id_child = hou.organization_id
AND poe.business_group_id = hou2.business_group_id
AND poe.organization_id_parent = hou2.organization_id
AND hrl.lookup_code = hou.type
AND hrl.enabled_flag = 'Y'
AND hrl.lookup_type = 'ORG_TYPE'
AND hrl.lookup_code NOT IN (30,40)
AND TRUNC(SYSDATE) BETWEEN hou.date_from AND NVL(hou.date_to, TO_DATE('31.12.4712','dd.mm.yyyy'))
AND hou.last_update_date >= to_date(:BINDVAR,'YYYYMMDDHH24MISS')
*** DevHRAgentGroups.map ***
DomainRules
NONLDAP:cn=DEV,cn=HRSyncGroups,cn=Groups,dc=ic,dc=lan:departmentID=%,cn=DEV,cn=HRSyncGroups,cn=Groups,dc=ic,dc=lan
AttributeRules
orgname:1: : :cn: :groupOfUniqueNames
depno:1: : :departmentID: :kapitalDepartment
ldapuri: : : :labeledURI: :orclDynamicGroup
We're getting the following error in ?/ldap/odi/log/DevHRAgentGroups.trc during HRAgent execution at mapping phase:
Normalized DN : departmentid=82,cn=dev,cn=hrsyncgroups,cn=groups,dc=ic,dc=lan
Changetype is 5
Processing modifyRadd Operation ..
Entry Not Found. Converting to an ADD op..
Processing Insert Operation ..
Performing createEntry..
Exception creating Entry : javax.naming.NamingException: [LDAP: error code 1 - Dynamic group cache update failed.]; remaining name 'departmentid=82,cn=dev,cn=
hrsyncgroups,cn=groups,dc=ic,dc=lan'
[LDAP: error code 1 - Dynamic group cache update failed.]
javax.naming.NamingException: [LDAP: error code 1 - Dynamic group cache update failed.]; remaining name 'departmentid=82,cn=dev,cn=hrsyncgroups,cn=groups,dc=i
c,dc=lan'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3028)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_createSubcontext(LdapCtx.java:777)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_createSubcontext(ComponentDirContext.java:319)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:248)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:236)
at javax.naming.directory.InitialDirContext.createSubcontext(InitialDirContext.java:176)
at oracle.ldap.odip.gsi.LDAPWriter.createEntry(LDAPWriter.java:1162)
at oracle.ldap.odip.gsi.LDAPWriter.insert(LDAPWriter.java:425)
at oracle.ldap.odip.gsi.LDAPWriter.modifyRadd(LDAPWriter.java:822)
at oracle.ldap.odip.gsi.LDAPWriter.writeChanges(LDAPWriter.java:349)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:655)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:376)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:237)
DIP_LDAPWRITER_ERROR_CREATE
Error in executing mapping DIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
Please, note. Loading is successful if we commenting out mapping line for labeledURI attribute (that's loading static groups).
Loading is also successful when labeledURI is mapped to
'ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(objec
tclass=person)' but this definetly is not what we are going to get.
I don't have ideas what's wrong for example with the following generated 'labeledURI' attribute:
ldap://idm01.ic.lan:389/cn=DEV,cn=HRSyncUsers,cn=Users,dc=ic,dc=lan??sub?(departmentnumber=82)
Any help is appreciated
Thanks,
Edward

Hi Frank,
there is something wrong with departmentnumber attribute of user records. Searching users with ldapsearch using "departmentnumber=*" filter fails with the following error:
ldap_search: DSA is unwilling to perform
ldap_search: additional info: Function Not Implemented
I think this is probably the cause of failing creation of dynamic groups.
Searching on other user attributes (cn, uid, employyenumber) works fine.
Still don't understand what's wrong with this particular attribute.

SQL Query for members of dynamic group - Need to include Name, Path and Type

Hello,
I built a custom dynamic group that has all my SQL databases in it using SCOM 2012 SP1. The group works fine as I can see the Name(ie, Database name), Health State, Path (ie, hostname/instance) and Types (ie; SQL 2005). Now I'm trying to
build a custom report based off this same information using a SQL query. I'm no DBA and could use some help. So far this is what i have
use
select
SourceObjectDisplayName as
'Group Name',
TargetObjectDisplayName,TargetObjectPath
from RelationshipGenericView
where isDeleted=0
AND SourceObjectDisplayName
like
'SQL_Databases_All'
ORDERBY TargetObjectDisplayName
This gets me the Group Name (which i really don't care about), database name, and hostname/instance. What I am missing is the Health State and most importantly the Type (ie, SQL Server 2005 DB, SQL Server 2008DB).
If someone could assist me here I would appreciate it. I believe I need to do some type of INNER JOIN but have no idea where the SQL type info lives or the proper structure to use. Thanks
OperationsManager

Here's the updated Query for OpsMan 2012 R2:
To find all members of a given group (change the group name below):
select SourceObjectDisplayName as 'Group Name', TargetObjectDisplayName as 'Group Members'
from RelationshipGenericView
where isDeleted=0
AND SourceObjectDisplayName = 'Agent Managed Computer
Group'
ORDER BY TargetObjectDisplayName

LDAP Dynamic Groups

Hi,
I have been trying to do some coding around - fetching members of dynamic ldap groups. In both these code snippets.. I get the same exception:
java.lang.ClassCastException: com.sun.jndi.ldap.LdapCtx
no matter whatever i tried. Can anyone please - let me know what could be causing this exception.
Regards.
String filter = LDAPRealm.DYNAMIC_GROUP_FILTER;
          String[] targets = new String[] { target, "memberUrl" };
          try {
               SearchControls ctls = new SearchControls();
               ctls.setReturningAttributes(targets);
               ctls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               ctls.setReturningObjFlag(true);
               NamingEnumeration e = context.search(baseDN, filter, ctls);
               while(e.hasMore()) {
                    SearchResult res = (SearchResult)e.next();
                    Object searchedObject = res.getObject();
                    //if(searchedObject instanceof com.sun.jndi.ldap.obj.GroupOfURLs){ // dynamic group
                         com.sun.jndi.ldap.obj.GroupOfURLs gurls = (com.sun.jndi.ldap.obj.GroupOfURLs) searchedObject;
                         Principal x500principal = new X500Principal(userDN);
                         if (gurls.isMember(x500principal)) {
and
java.security.acl.Group obj = (java.security.acl.Group)ctx.lookup(groupDN);
               Enumeration members = obj.members();
               Principal member = null;
               while (members.hasMoreElements()) {
                    member = (Principal)members.nextElement();
                    memberDNs.add(member.getName());
               }

How is this different from [your previous question|http://forums.sun.com/thread.jspa?threadID=5434523&messageID=10965220#10965220]? If it is the same queston, then please stay in the same thread.

Dynamic group membership Query based on alert description - IS package failed

Hi there all good people,
Ive got the following case:
i need to filter out some of the alerts raised bij the is package failed Alert rule.
All allerts raised need a override accept two alerts with a specific description. example:
Alert description: Package "Full Back-Up" failed. should still raise an alert also the
Alert description: Package "Full Db Back-Up" failed.
I.m playing arround with dynamic groups. Can somebody give me some pointers?
Or do i need to create an new alert rule? en override this one for all objects?
I hope the question is clear, im no native english speaking

Hi,
I would like to suggest you override this one for all objects and then create a new alert rule based on your requirement.
Regards,
Yan Li
Regards, Yan Li

Dynamic group for HSW object based on Site (Gateway) server

Hi
Using the SiteName parameter when deploying gateway servers like described in the blog post from Cameron Fuller
http://blogs.catapultsystems.com/cfuller/archive/2015/02/12/creating-dynamic-groups-for-objects-which-exist-behind-a-gateway-in-opsmgr-part-1.aspx
I would like to create an aditional dynamic Group with all Health Service Watcher objects related to an Site (Autocreate) Group.
Any ideas on the XML Query or other ways of duing this?

Yes I know this one, but the SiteName Group is not in my MP.
So I need to reference the XML to a Group outside of my own MP.
Like:
http://blogs.technet.com/b/kevinholman/archive/2014/04/09/creating-groups-of-health-service-watcher-objects-based-on-other-groups.aspx
But with the '<MonitoringClass>$MPElement[Name="grouptest.compgroup"]$</MonitoringClass>'
Line pointing to a autocreated SiteName Group.

Using dynamic groups for j2ee security

Hi all,
I have my realm setup in server.xml and my standard and sun-specific deployment descriptors setup for j2ee security.
Everything seems to work fine for groups defined via uniquemember attributes (all users are specified), but I'm having trouble with dynamic groups (defined with the memberurl attribute)
How do I configure my realm in my server.xml to get this working?

Hi,
I got an official answer from SUN.
"Dynamic Groups" are not (longer) supported with SJS AS 7!
It will probably be supported with SJS AS 8 SE.
If you have a iPlanet 6.5 application that is running with dynamic groups, just wait a little bit before you migrate.

Dynamic Group members error

I create 5 Dynamic Group and 1 Universal Distribution Group. I add 5 Dynamic Group in 1 Universal Distribution Group. If i view members in every all correct, but if i run in powershell Get-DynamicDistributionGroup/Get-Recipient -recipientPreviewFilter
- i view all users in domain with mailbox. How fix this?

Hi,
Do you mean that you can use EAC to view members in 5 dynamic distribution groups respectively and the preview shows correct users, but shows wrong when using EMS?
Please use the following command in EMS to preview the list of members of your dynamic distribution group:
To view Group1:
$Group1 = Get-DynamicDistributionGroup "Group1"
Get-Recipient -RecipientPreviewFilter $Group1.RecipientFilter
To view Group2:
$Group2 = Get-DynamicDistributionGroup "Group2"
Get-Recipient -RecipientPreviewFilter $Group2.RecipientFilter
Please check the results with the preview in EAC:
1. In the EAC, navigate to Recipients > Groups.
2. Select a dynamic distribution group.
3. In the details pane under Membership, the number of people who received the last message sent to the dynamic distribution group is displayed.
Regards,
Winnie Liang
TechNet Community Support

Dynamic groups

Folks,
Dynamic groups do not work in my add event window in calendar. I can search and select the group but nothing is done. I have run a search with the search filter from the group and it works as expected.
keith

Hi Rob,
I've been told by engineering that Dynamic Groups aren't supported by ZESM. A reference to this will be added into the known issues section.
Sorry for the delay,
Daniel
>>>
From: rbannerman<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 2/26/2010 5:46 PM
Subject: Dynamic Groups
Hi,
I have setup a couple of dynamic groups as I wanted to setup security
policy based on employee title. I assigned and published the policy but
the published icon only appears next to the dynamic group. I did test
and the policy is not applies to users.
Does endpoint 4.1 work with dynamic group and if so what do I need to
do to make work?
Rob
rbannerman
rbannerman's Profile: http://forums.novell.com/member.php?userid=10471
View this thread: http://forums.novell.com/showthread.php?t=403159

How to create dynamic room in runtime execution?

Hello All,
Can you please suggest me how can I create dynamic room in runtime execution? I do not want to create fixed room from the room consol. I want to create a new room & also delete it after work complete in runtime execution.
thanks,
krish

Hi Krish,
If you are using your own server to do ExternalAuthentication, then you can
user server to server API's to do that. Please refer to Server2Server apps
in the SDK's sample apps folder.
Else you might have to use AccountManager with room
owner credentials. But the Server2Server aprroach is highly recommended.
                private var acctMgr:AccountManager = new AccountManager();
                acctMgr.accountURL = m_accountURL;
                acctMgr.authenticator = authenticator;
                acctMgr.addEventListener(AccountManagerEvent.LOGIN_SUCCESS, authenticateSuccess);
                //acctMgr.addEventListener(AccountManagerEvent.LOGIN_FAILURE, authenticateFailure);
                //acctMgr.addEventListener(AccountManagerEvent.ACCESS_ERROR, onAuthenticationAccessError);
                public function authenticateSuccess(event:AccountManagerEvent):void {
                   acctMgr.addEventListener(AccountManagerEvent.ROOM_DELETE, onRoomDelete);
                   acctMgr.deleteRoom(name, template);
                public function onRoomDelete(event:AccountManagerEvent):void {
Thanks
Arun

Using Dynamic Groups in Ldap for Accounts and Roles

Does anyone currently use dynamic groups in LDAP for accounts and roles? I have set up a dynamic group in ldap (we are using OID Oracle internet Directory 10.1.2.0) , ldapsearch returns the correct list of unique names, but the account does not appear on my profile page when I log in to UCM (10.1.3). I cannot find any documentation so I'm asking myself if it is supported .....

Thanks tim ... will check, but Oracle are saying :
Oracle Universal Content Management - Version: 7.5.1
Information in this document applies to any platform.
Product: Content Server
Version: 6.0
Goal
Can the Content Server's LDAP provider support, or can it be configured to support, dynamic LDAP groups?
Solution
The Content Server by itself is unable to process dynamic LDAP groups since the filter that is used cannot read dynamic groups. However, dynamic groups can still work in the Content Server if the permissions for the queried user are generated on the LDAP server side. For example: Novell and Active Directory both have this functionality.
to which I have replied you suport 3rd party ldaps, but not your own? Shurely shome mishtake ..... if ldap search works in a seamless way, surely provider should too ....
Billy, you may well be right, just got a cashflow problem over here !

Dynamic groups at runtime

Similar Messages

Maybe you are looking for