Dynamic Header - 2012 SP2
Hello!
Before I start with my question, I'd to say that I've spent a whole day testing out different answers on the internet, most of them here in msdn and some others from Stackoverflow. Almost all say the same, and nothing worked. So please, if you have ideas,
dont tell me anything its already online.
This is my scenario: I have a work order report, which normally doesn't get printed alone but in bulk with several others work orders.
Layout of main subreport its something like this:
Header (with some of the WO info, # and some filters)
Detailed Info
Subreport with stuff to do
Info
Subreport with safety instructions
Signatures
Then I have a main Report with just a table and the "main subreport" I wrote above.
I need a way to repeat the header per page, knowing its not static, it changes data on every WO.
Main problem is when any (or both) of subreports gets big enough that causes a page break and continues on next one. Works good except don't get the header.
Need the WO ID and some other data to be repeated if its more than 1 page.
I have tried everything, there is no solution I haven't tried, even updated to SP2 and its still the same.
Doesn't work:
Header in subreports
RepeatOnNewPage + KeepWithGroup
FixedData
Tablix properties
Using multiple tables in main subreport and try above options
Using just one table as layout of main subreport. and try above options.
I cannot have the header on the main report cos I need to set some of the details data on it..
Thanks, hope someone knows a solution.
JC.
Hi jose,
According to your description, you want to have the header in subreport be repeated in each page if it need more than one page to render when exporting the main report. Right?
In this scenario, we just need to set the first static row repeat on new page in subreport, as we tested in our local environment, the header is repeated when exporting the main report.
Also please see the blog below:
Repeat Header / Keep Header Visible in Tables in RS 2008
If this still can't solve your problem, please post some screenshot about your report design and render result, it can help us reproduce your issue in our local environment. Thank you.
Best Regards,
Simon Hou
Similar Messages
-
Section Break conflicts with Dynamic Header in RTF which loads XML data
Hi,
I have dynamic header in my rtf file which loads data from XML generated by rdf file.
I have section break on start group of body. but it does not display dynamic header value. If i remove section break then it display dynamic header.
I have to display dynamic header and section break is also required there.
Please give me solution of this issue.
Regards
Farooq
Edited by: user8849418 on Jun 27, 2012 12:05 AMflyeminent wrote:
However in my particular case, the dynamic list is not known until the user choose to view a table. Then move the call from the getter to the bean's action method. -
SQL Server 2012 SP2 Cumulative Update 5
We are starting to take a look at Cumulative update 5 for SQL Server 2012 SP2. The Installation was going smooth until the very in, where it sat on trying to start MSSQLServer for several minutes and finally timed out. Why does Cumulative
patch 5 says it failed to start the service when the server is already running? Version number changed, and everthing looks ok, except for the error message in the log file.
Is this a valid installation or do I need to try again?
Thanks.
DJThanks for the reply. The ErrorLog is too large to post in 1 reply. Will post multiple times.
Version of the SQL Server shows 11.0.5582.0
Dj
Post 1
2015-03-24 14:13:23.82 Server Microsoft SQL Server 2012 - 11.0.5582.0 (X64)
Feb 27 2015 18:10:15
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-24 14:13:23.82 Server (c) Microsoft Corporation.
2015-03-24 14:13:23.82 Server All rights reserved.
2015-03-24 14:13:23.82 Server Server process ID is 37184.
2015-03-24 14:13:23.82 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-24 14:13:23.82 Server Authentication mode is MIXED.
2015-03-24 14:13:23.82 Server Logging SQL Server messages in file 'L:\SQL Server\Log Files\ERRORLOG'.
2015-03-24 14:13:23.82 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2015-03-24 14:13:23.82 Server Registry startup parameters:
-d H:\\System DB\Data\master.mdf
-e L:\SQL Server\Log Files\ERRORLOG
-l G:\\System DB\Logs\mastlog.ldf
2015-03-24 14:13:23.82 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
2015-03-24 14:13:24.15 Server SQL Server detected 1 sockets with 2 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational
message; no user action is required.
2015-03-24 14:13:24.15 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-24 14:13:24.15 Server Detected 8191 MB of RAM. This is an informational message; no user action is required.
2015-03-24 14:13:24.15 Server Using locked pages in the memory manager.
2015-03-24 14:13:24.15 Server Common Criteria compliance mode is enabled. This is an informational message only; no user action is required.
2015-03-24 14:13:24.22 Server This instance of SQL Server last reported using a process ID of 39820 at 3/24/2015 2:09:46 PM (local) 3/24/2015 6:09:46 PM (UTC). This is an informational message only; no user action is required.
2015-03-24 14:13:24.23 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-24 14:13:24.23 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-24 14:13:24.24 Server Software Usage Metrics is disabled.
2015-03-24 14:13:24.24 spid4s Starting up database 'master'.
2015-03-24 14:13:24.30 spid4s 9 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 14:13:24.32 spid4s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-03-24 14:13:24.32 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2015-03-24 14:13:24.33 Server CLR version v4.0.30319 loaded.
2015-03-24 14:13:24.36 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-24 14:13:39.41 spid6s SQL Server has encountered 1 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [H:\\System DB\Data\master.mdf] in database [master] (1). The OS file handle is 0x0000000000000598.
The offset of the latest long I/O is: 0x0000000002a000
2015-03-24 14:13:53.94 spid4s Recovery completed for database master (database ID 1) in 29 second(s) (analysis 3 ms, redo 39 ms, undo 8 ms.) This is an informational message only. No user action is required.
2015-03-24 14:13:54.19 spid4s CHECKDB for database 'master' finished without errors on 2015-03-06 08:35:22.387 (local time). This is an informational message only; no user action is required.
2015-03-24 14:13:54.19 spid4s Resource governor reconfiguration succeeded.
2015-03-24 14:13:54.19 spid4s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-03-24 14:13:54.19 spid4s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-03-24 14:13:54.21 spid4s Server name is 'Server'. This is an informational message only. No user action is required.
2015-03-24 14:13:54.22 spid4s Failed to verify Authenticode signature on DLL 'S:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\ftimport.dll'.
2015-03-24 14:13:54.22 spid9s Starting up database 'mssqlsystemresource'.
2015-03-24 14:13:54.22 spid14s Starting up database 'msdb'.
2015-03-24 14:13:54.23 spid15s Starting up database 'Mgmt'.
2015-03-24 14:13:54.24 spid16s Starting up database 'Web2'.
2015-03-24 14:13:54.24 spid12s The certificate [Cert Hash(sha1) "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"] was successfully loaded for encryption.
2015-03-24 14:13:54.24 spid18s Starting up database 'Web2A'.
2015-03-24 14:13:54.24 spid9s The resource database build version is 11.00.5582. This is an informational message only. No user action is required.
2015-03-24 14:13:54.25 spid12s Server is listening on [ 'any' <ipv6> 1433].
2015-03-24 14:13:54.25 spid12s Server is listening on [ 'any' <ipv4> 1433].
2015-03-24 14:13:54.25 spid12s Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2015-03-24 14:13:54.26 spid12s Server local connection provider is ready to accept connection on [
\\.\pipe\sql\query ].
2015-03-24 14:13:54.26 Server Server is listening on [ ::1 <ipv6> 1434].
2015-03-24 14:13:54.26 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2015-03-24 14:13:54.26 Server Dedicated admin connection support was established for listening locally on port 1434.
2015-03-24 14:13:54.26 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This
is an informational message. No user action is required.
2015-03-24 14:13:54.33 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/Server.local ] for the SQL Server service.
2015-03-24 14:13:54.33 Server The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ MSSQLSvc/Server.local:1433 ] for the SQL Server service.
2015-03-24 14:13:54.39 spid9s Starting up database 'model'.
2015-03-24 14:13:54.42 spid4s 1 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2015-03-24 14:13:54.42 spid4s Recovery is writing a checkpoint in database 'msdb' (4). This is an informational message only. No user action is required.
2015-03-24 14:13:54.46 spid9s 1 transactions rolled forward in database 'model' (3:0). This is an informational message only. No user action is required.
2015-03-24 14:13:54.47 spid9s 0 transactions rolled back in database 'model' (3:0). This is an informational message only. No user action is required.
2015-03-24 14:13:54.62 spid9s Clearing tempdb database.
2015-03-24 14:14:17.34 spid9s Starting up database 'tempdb'.
2015-03-24 14:14:27.05 spid19s The Service Broker endpoint is in disabled or stopped state.
2015-03-24 14:14:27.06 spid19s The Database Mirroring endpoint is in disabled or stopped state.
2015-03-24 14:14:27.07 spid19s Service Broker manager has started.
2015-03-24 14:14:27.21 spid15s CHECKDB for database 'Mgmt' finished without errors on 2014-09-14 00:02:54.637 (local time). This is an informational message only; no user action is required.
2015-03-24 14:14:27.58 spid16s CHECKDB for database 'Web2' finished without errors on 2015-03-22 00:00:43.253 (local time). This is an informational message only; no user action is required.
2015-03-24 14:14:27.65 spid4s Database 'master' is upgrading script 'ProvisionAgentIdentity.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:27.65 spid4s Database 'master' is upgrading script 'no_op.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:27.93 spid4s Database 'master' is upgrading script 'no_op.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:27.94 spid4s -----------------------------------------
2015-03-24 14:14:27.94 spid4s Starting execution of dummy.sql
2015-03-24 14:14:27.94 spid4s -----------------------------------------
2015-03-24 14:14:27.94 spid4s Database 'master' is upgrading script 'repl_upgrade.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:27.94 spid4s Executing replication upgrade scripts.
2015-03-24 14:14:27.99 spid4s Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 14:14:28.07 spid4s Using 'xpstar.dll' version '2011.110.5058' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2015-03-24 14:14:28.09 spid4s Executing sp_vupgrade_replication.
2015-03-24 14:14:28.50 spid4s Upgrading publication settings and system objects in database [Mgmt].
2015-03-24 14:14:28.89 spid4s Upgrading publication settings and system objects in database [Web2].
2015-03-24 14:14:29.98 spid4s Upgrading publication settings and system objects in database [Web2A].
2015-03-24 14:14:30.48 spid4s Could not open database [LEGACY_DSS]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:30.48 spid4s Could not open database [PROD_1]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when the
database is available.
2015-03-24 14:14:30.48 spid4s Could not open database [PROD_LS]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:30.48 spid4s Could not open database [PROD_NG]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:30.48 spid4s Could not open database [PROD_RSV]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:30.52 spid4s Upgrading subscription settings and system objects in database [Mgmt].
2015-03-24 14:14:31.17 spid4s Attempting to load library 'xprepl.dll' into memory. This is an informational message only. No user action is required.
2015-03-24 14:14:31.19 spid4s Using 'xprepl.dll' version '2011.110.5582' to execute extended stored procedure 'xp_repl_encrypt'. This is an informational message only; no user action is required.
2015-03-24 14:14:31.19 spid4s Upgrading subscription settings and system objects in database [Web2].
2015-03-24 14:14:31.75 spid4s Upgrading subscription settings and system objects in database [Web2A].
2015-03-24 14:14:32.31 spid4s Could not open database [LEGACY]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when the
database is available.
2015-03-24 14:14:32.31 spid4s Could not open database [PROD_1]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when the
database is available.
2015-03-24 14:14:32.31 spid4s Could not open database [PROD_LS]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:32.31 spid4s Could not open database [PROD_NG]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:32.31 spid4s Could not open database [PROD_RSV]. Replication settings and system objects could not be upgraded. If the database is used for replication, run sp_vupgrade_replication in the [master] database when
the database is available.
2015-03-24 14:14:32.33 spid4s Attempting to copy article resolvers from SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.MSSQLSERVER\Replication\ArticleResolver
2015-03-24 14:14:32.59 spid4s sp_vupgrade_replication executed successfully
2015-03-24 14:14:32.59 spid4s Saving upgrade script status to 'SOFTWARE\Microsoft\MSSQLServer\Replication\Setup'.
2015-03-24 14:14:32.59 spid4s Saved upgrade script status successfully.
2015-03-24 14:14:32.59 spid4s Database 'master' is upgrading script 'upgrade_ucp_cmdw_discovery.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:32.92 spid4s Database 'master' is upgrading script 'msdb110_upgrade.sql' from level 184554434 to level 184554958.
2015-03-24 14:14:32.92 spid4s ----------------------------------
2015-03-24 14:14:32.92 spid4s Starting execution of PRE_MSDB.SQL
2015-03-24 14:14:32.92 spid4s ----------------------------------
2015-03-24 14:14:33.08 spid4s Setting database option COMPATIBILITY_LEVEL to 100 for database 'msdb'.
2015-03-24 14:14:33.17 spid4s -----------------------------------------
2015-03-24 14:14:33.17 spid4s Starting execution of PRE_SQLAGENT100.SQL
2015-03-24 14:14:33.17 spid4s -----------------------------------------
2015-03-24 14:14:33.17 spid4s Setting database option COMPATIBILITY_LEVEL to 110 for database 'msdb'.
2015-03-24 14:14:33.22 spid4s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 14:14:33.22 spid4s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 14:15:00.06 spid6s SQL Server has encountered 1 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [G:\\System DB\Logs\MSDBLog.ldf] in database [msdb] (4). The OS file handle is 0x0000000000000790.
The offset of the latest long I/O is: 0x00000000efac00
2015-03-24 14:16:00.87 spid4s DBCC TRACEOFF 1717, server process ID (SPID) 4. This is an informational message only; no user action is required.
2015-03-24 14:16:00.87 spid4s DBCC execution completed. If DBCC printed error messages, contact your system administrator.
2015-03-24 14:16:00.88 spid4s
2015-03-24 14:16:00.88 spid4s Creating table temp_sysjobschedules
2015-03-24 14:16:01.00 spid4s
2015-03-24 14:16:01.00 spid4s Alter table sysdownloadlist...
2015-03-24 14:16:01.00 spid4s
2015-03-24 14:16:01.00 spid4s Alter table sysjobhistory...
2015-03-24 14:16:01.02 spid4s
2015-03-24 14:16:01.02 spid4s Alter table systargetservers...
2015-03-24 14:16:01.02 spid4s
2015-03-24 14:16:01.02 spid4s Alter table sysjobsteps...
2015-03-24 14:16:01.09 spid4s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 14:16:01.09 spid4s Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.
2015-03-24 14:16:01.09 spid4s
2015-03-24 14:16:01.09 spid4s -----------------------------------------
2015-03-24 14:16:01.09 spid4s Execution of PRE_SQLAGENT100.SQL complete
2015-03-24 14:16:01.09 spid4s -----------------------------------------
2015-03-24 14:16:01.10 spid4s DMF pre-upgrade steps...
2015-03-24 14:16:01.25 spid4s DC pre-upgrade steps...
2015-03-24 14:16:01.25 spid4s Check if Data collector config table exists...
2015-03-24 14:16:01.25 spid4s Data Collector state before upgrade: 0
2015-03-24 14:16:01.25 spid4s pre_dc100::Check if syscollector_collection_sets_internal table exists...
2015-03-24 14:16:01.25 spid4s pre_dc100::Capturing Collection set status in temp table...
2015-03-24 14:16:01.33 spid4s Deleting cached auto-generated T-SQL Data Collection packages from msdb...
2015-03-24 14:16:01.33 spid4s End of DC pre-upgrade steps.
2015-03-24 14:16:01.33 spid4s DAC pre-upgrade steps...
2015-03-24 14:16:01.33 spid4s Starting DAC pre-upgrade steps ...
2015-03-24 14:16:01.33 spid4s End of DAC pre-upgrade steps.
2015-03-24 14:16:01.33 spid4s ----------------------------------
2015-03-24 14:16:01.33 spid4s Starting execution of MSDB.SQL
2015-03-24 14:16:01.33 spid4s ----------------------------------
2015-03-24 14:16:01.39 spid4s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 14:16:01.39 spid4s Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.
2015-03-24 14:16:01.42 spid4s Checking the size of MSDB...
2015-03-24 14:16:01.60 spid4s
2015-03-24 14:16:01.60 spid4s Setting database option TRUSTWORTHY to ON for database 'msdb'.
2015-03-24 14:16:01.60 spid4s Setting database option RECOVERY to SIMPLE for database 'msdb'.
2015-03-24 14:16:01.63 spid4s ----------------------------------
2015-03-24 14:16:01.63 spid4s Finished execution of MSDB.SQL
2015-03-24 14:16:01.63 spid4s ----------------------------------
2015-03-24 14:16:01.63 spid4s -----------------------------------------
2015-03-24 14:16:01.63 spid4s Starting execution of MSDB_VERSIONING.SQL
2015-03-24 14:16:01.63 spid4s -----------------------------------------
2015-03-24 14:16:01.63 spid4s -----------------------------------------
2015-03-24 14:16:01.63 spid4s Finished execution of MSDB_VERSIONING.SQL
2015-03-24 14:16:01.63 spid4s -----------------------------------------
2015-03-24 14:16:01.63 spid4s Dropping view MSdatatype_mappings...
2015-03-24 14:16:01.63 spid4s Dropping view sysdatatypemappings...
2015-03-24 14:16:30.94 spid4s Dropping table MSdbms_datatype_mapping...
2015-03-24 14:16:30.95 spid4s Dropping table MSdbms_map...
2015-03-24 14:16:30.96 spid4s Dropping table MSdbms_datatype...
2015-03-24 14:16:30.96 spid4s Dropping table MSdbms...
2015-03-24 14:16:30.99 spid4s Creating table MSdbms
2015-03-24 14:16:31.00 spid4s Creating table MSdbms_datatype
2015-03-24 14:17:30.96 spid4s Creating table MSdbms_map
2015-03-24 14:17:30.96 spid4s Creating table MSdbms_datatype_mapping
2015-03-24 14:17:30.97 spid4s Definining default datatype mappings
2015-03-24 14:17:30.98 spid4s Creating datatype mappings for MSSQLSERVER to ORACLE8
2015-03-24 14:17:31.08 spid4s Creating datatype mappings for MSSQLSERVER to ORACLE9
2015-03-24 14:17:31.12 spid4s Creating datatype mappings for MSSQLSERVER to ORACLE10
2015-03-24 14:17:31.17 spid4s Creating datatype mappings for MSSQLSERVER to ORACLE11
2015-03-24 14:17:31.22 spid4s Creating datatype mappings for MSSQLSERVER to DB2
2015-03-24 14:17:31.28 spid4s Creating datatype mappings for MSSQLSERVER to SYBASE
2015-03-24 14:17:31.33 spid4s Creating datatype mappings for ORACLE8 to MSSQLSERVER
2015-03-24 14:17:31.38 spid4s Creating datatype mappings for ORACLE9 to MSSQLSERVER
2015-03-24 14:17:31.45 spid4s Creating datatype mappings for ORACLE10 to MSSQLServer
2015-03-24 14:17:50.00 spid4s Creating datatype mappings for ORACLE11 to MSSQLServer
2015-03-24 14:17:59.30 spid4s Creating view MSdatatype_mappings
2015-03-24 14:17:59.31 spid4s Creating view sysdatatypemappings
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_enum_proxy_for_subsystem
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_enum_login_for_proxy
2015-03-24 14:17:59.89 spid4s Dropping signature from: sysmail_delete_mailitems_sp
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_sqlagent_get_startup_info
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_sqlagent_has_server_access
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_sqlagent_get_perf_counters
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_sqlagent_notify
2015-03-24 14:17:59.89 spid4s Dropping signature from: sysmail_delete_log_sp
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_is_sqlagent_starting
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_verify_job_identifiers
2015-03-24 14:17:59.89 spid4s Dropping signature from: sp_verify_schedule_identifiers
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_verify_jobproc_caller
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_downloaded_row_limiter
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_post_msx_operation
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_verify_performance_condition
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_verify_job_date
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_verify_job_time
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_verify_alert
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_update_alert
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_delete_job_references
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_delete_all_msx_jobs
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_verify_accountparams_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_generate_target_server_job_assignment_sql
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_generate_server_description
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_verify_principal_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_msx_set_account
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_verify_profile_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_msx_get_account
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_verify_account_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_delete_operator
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_add_profile_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_msx_defect
2015-03-24 14:17:59.90 spid4s Dropping signature from: sysmail_update_profile_sp
2015-03-24 14:17:59.90 spid4s Dropping signature from: sp_msx_enlist
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_delete_profile_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_delete_targetserver
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_help_profile_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_enlist_tsx
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_create_user_credential_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_get_sqlagent_properties
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_alter_user_credential_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_set_sqlagent_properties
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_drop_user_credential_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_add_targetservergroup
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_add_account_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_update_targetservergroup
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_update_account_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_delete_targetservergroup
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_delete_account_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_help_targetservergroup
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_help_account_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_add_targetsvrgrp_member
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_help_admin_account_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_delete_targetsvrgrp_member
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_add_profileaccount_sp
2015-03-24 14:17:59.91 spid4s Dropping signature from: sp_verify_category
2015-03-24 14:17:59.91 spid4s Dropping signature from: sysmail_update_profileaccount_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_add_category
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_delete_profileaccount_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_update_category
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_help_profileaccount_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_delete_category
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_configure_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_help_category
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_help_configure_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_help_targetserver
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_help_configure_value_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_resync_targetserver
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_add_principalprofile_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_purge_jobhistory
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_update_principalprofile_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_help_jobhistory_full
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_delete_principalprofile_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_help_jobhistory_summary
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_help_principalprofile_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_help_jobhistory
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_logmailevent_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_add_jobserver
2015-03-24 14:17:59.92 spid4s Dropping signature from: sysmail_start_sp
2015-03-24 14:17:59.92 spid4s Dropping signature from: sp_delete_jobserver
2015-03-24 14:17:59.93 spid4s Dropping signature from: sysmail_stop_sp
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_help_jobserver
2015-03-24 14:17:59.93 spid4s Dropping signature from: sysmail_help_status_sp
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_help_downloadlist
2015-03-24 14:17:59.93 spid4s Dropping signature from: sysmail_help_queue_sp
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_enum_sqlagent_subsystems_internal
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_SendMailMessage
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_enum_sqlagent_subsystems
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_isprohibited
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_verify_subsystem
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_SendMailQueues
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_verify_schedule
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_ProcessResponse
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_add_schedule
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_MailItemResultSets
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_attach_schedule
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_process_DialogTimer
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_detach_schedule
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_readrequest
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_update_replication_job_parameter
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_GetAttachmentData
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_update_schedule
2015-03-24 14:17:59.93 spid4s Dropping signature from: sp_RunMailQuery
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_delete_schedule
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_validate_user
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_get_jobstep_db_username
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_send_dbmail
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_verify_jobstep
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_ExternalMailQueueListener
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_add_jobstep_internal
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_sysmail_activate
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_add_jobstep
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_update_jobstep
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_delete_jobstep
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_help_jobstep
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_write_sysjobstep_log
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_maintplan_delete_log
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_help_jobsteplog
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_maintplan_delete_subplan
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_delete_jobsteplog
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_maintplan_update_subplan_tsx
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_get_schedule_description
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_maintplan_subplans_by_job
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_add_jobschedule
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_maintplan_open_logentry
2015-03-24 14:17:59.94 spid4s Dropping signature from: sp_update_jobschedule
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_maintplan_close_logentry
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_delete_jobschedule
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_maintplan_update_log
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_help_schedule
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_maintplan_update_subplan
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_help_jobschedule
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_maintplan_delete_plan
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_verify_job
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_maintplan_start
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_add_job
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_get_script
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_update_job
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_clear_dbmaintplan_by_db
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_delete_job
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_add_maintenance_plan
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_get_composite_job_info
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_delete_maintenance_plan
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_help_job
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_add_maintenance_plan_db
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_help_jobcount
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_delete_maintenance_plan_db
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_help_jobs_in_schedule
2015-03-24 14:17:59.95 spid4s Dropping signature from: sp_add_maintenance_plan_job
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_manage_jobs_by_login
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_delete_maintenance_plan_job
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_apply_job_to_targets
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_help_maintenance_plan
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_remove_job_from_targets
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_get_job_alerts
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_start_job
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_stop_job
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_add_log_shipping_monitor_jobs
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_cycle_agent_errorlog
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_add_log_shipping_primary
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_get_chunked_jobstep_params
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_add_log_shipping_secondary
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_check_for_owned_jobs
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_delete_log_shipping_monitor_jobs
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_check_for_owned_jobsteps
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_delete_log_shipping_primary
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_sqlagent_refresh_job
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_delete_log_shipping_secondary
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_jobhistory_row_limiter
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_log_shipping_in_sync
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_sqlagent_log_jobhistory
2015-03-24 14:17:59.96 spid4s Dropping signature from: sp_log_shipping_get_date_from_file
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_sqlagent_check_msx_version
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_get_log_shipping_monitor_info
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_sqlagent_probe_msx
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_update_log_shipping_monitor_info
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_set_local_time
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_delete_log_shipping_monitor_info
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_multi_server_job_summary
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_remove_log_shipping_monitor_account
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_target_server_summary
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_log_shipping_monitor_backup
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_uniquetaskname
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_log_shipping_monitor_restore
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_addtask
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_change_monitor_role
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_droptask
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_create_log_shipping_monitor_account
2015-03-24 14:17:59.97 spid4s Dropping signature from: trig_targetserver_insert
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_add_alert_internal
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_ssis_addlogentry
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_add_alert
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_ssis_listpackages
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_delete_alert
2015-03-24 14:17:59.97 spid4s Dropping signature from: sp_ssis_listfolders
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_help_alert
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_deletepackage
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_operator
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_deletefolder
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_add_operator
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_sqlagent_is_srvrolemember
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_getpackage
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_update_operator
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_category_identifiers
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_getfolder
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_help_operator
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_putpackage
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_help_operator_jobs
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_proxy_identifiers
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_operator_identifiers
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_credential_identifiers
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_addfolder
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_notify_operator
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_subsystems
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_renamefolder
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_notification
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_verify_subsystem_identifiers
2015-03-24 14:17:59.98 spid4s Dropping signature from: sp_ssis_setpackageroles
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_add_notification
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_verify_login_identifiers
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_ssis_getpackageroles
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_update_notification
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_verify_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_delete_notification
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_add_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_help_notification
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_delete_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_help_jobactivity
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_update_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_sqlagent_is_member
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_verify_proxy_permissions
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_sem_add_message
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_help_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_sem_drop_message
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_get_message_description
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_grant_proxy_to_subsystem
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_help_jobhistory_sem
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_grant_login_to_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_convert_jobid_to_char
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_revoke_login_from_proxy
2015-03-24 14:17:59.99 spid4s Dropping signature from: sp_revoke_proxy_from_subsystem -
Dynamic Header help in PDF Portfolio
Need some help please, to create and load a Dynamic Header when creating a PDF Portfolio in LiveCycle ES2. Have input parameter of a [name] and an [image file] to place in the Header. Process flowing out of Assembler (PDF Generator). Currently other PDFs being inserted within the Portfolio, and Navigation parameter being received ok, and setting up custom navigation. Any help w/ creating Dynamic Header is very much appreciated.
By "Dynamic Header" do you mean the PDF cover page, or the interactive portfolio navigator?
If its the cover page then it should be a fairly easy thing to do. You can create a form (XDP or PDF template) with a field for the name and one for the image. Then you would use something like LC Forms or Form Data Integration to merge the data (image and name) with the template.
The one thing you would have to do is to put the image and data into an XML format before you merge it with the form. That means you will need to convert the image to a base64 encoded format. Fortunately there is a built in function for doing the conversion in a SetValue operation (its under Document Object Functions).
If you are talking about the Navigator (portfolio shell) then it gets a bit more tricky. The navigator is actually a Flex application and not a PDF. You'll have to code a new one using Flash Builder, then import the resulting .nav file into your LiveCycle application. Merging the data with it is not something I've done before, but it should be possible (the LiveCycle Interactive Statement Solution Accelerator does something similar).
If it is new navigator you need, check out some of the following links:
http://joelgeraci.com/adobe/devjunkie/web/portfolios_p1_outer.shtml
http://acrobatusers.com/tutorials/modifying-pdf-portfolio-navigator
http://acrobatusers.com/navigator-contest-faq (for the development software links) -
Dynamic header in oo alv print_top_of_page based on current line
I would expect this to be a common problem with the solution easily to google/find, but somehow...
dynamic header generation during alv print_top_of_page:
- i print an oo alv grid, sorted by kunnr
- for each new kunnr a new page
-> now I want during print-out to: at each top of page, read the first (or any) line of the current page, i.e. the current kunnr, and select data on basis of that kunnr to be written to the header.
My problem is that sy-tabix is not being filled correctly (always 1).
Strange thing is that in another report with a non-dynamic itab to display, sy-tabix is actuall being filled more or less correctly. (with the minor drawback that on the first page the tabix might not be 1 but more likely to be 2; but that's easy to fix and for the next pages sy-tabix is correct)
Kind regards, A
baanbrecherIn the handle_print_top_of_page method, use :
FIELD-SYMBOLS : <lv_line> TYPE ANY.
ASSIGN ('(SAPLKKBL)G_INDEX') TO <lv_line>.
if <lv_line> = 0. "First time, G_INDEX is equal to zero
<lv_line> = 1.
endif.
So in <lv_line> you will always have the good index of your table. -
Hi, We are migrating SSRS 2008 R2 reports to SSRS 2012 SP2. (PS. SSRS 2012 SP2 has been applied.) Everything went smooth expect some reports which were using reporting services. These reports have some drilin-through actions and was passing in a huge
xml parameter. I referred to some other posts in which there were also some similar issues like "The Uri string is too long." but they're different. My reports can be opened and the error only occurred when accessing the drill-through actions.
As I know, Microsoft has provided the fix for the known issue "The Uri string is too long." in sp1 but it looks it can't cover this kind of situation since I have installed the SSRS SP 2. Is there any solution? In addition, there's no such
issue on SSRS 2008 R2.
Thanks,
onizgaHi onizga,
According to your description that you are migrating SSRS 2008 R2 reports to SSRS 2012 SP2, after migration you got some error like “The Uri string is too long” which only occurred when accessing the drill-through actions, right?
Usually, the issue can be caused when you try to pass some parameters that cause the URL length to exceed 65,520 characters for a Microsoft SQL Server 2012 Reporting Services (SSRS 2012), you cannot render the report, and you may receive the following error
message:
The value of parameter 'param' is not valid. (rsInvalidParameter).Invalid URI: The Uri string is too long.
This is an known issue and already have the hotfix SQL Server 2012 Service Pack1 Cumulative Update 9 (CU9) as you know, you can try to reinstall this hotfix to fixed this issue:
http://support.microsoft.com/kb/2916827 .Any issue after applying the update, please post it on the following thread or you can submit an feedback:
http://connect.microsoft.com/SQLServer/feedback/details/788964/ssrs-2012-invalid-uri-the-uri-string-is-too-long
Similar threads for your reference:
SSRS - The value of parameter 'param' is
not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long.
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidParameterException:
The value of parameter 'pSetOfScopes' is not valid. ---> System.UriFormatException: Invalid URI: The Uri string is too long
If you still have any question, please feel free to ask
Regards
Vicky Liu
If you have any feedback on our support, please click here -
SSRS 2008 R2 - Dynamic header data stays the same when exporting
Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
1st let me set the tone by admitting I am not real familiar with SQL, I'm more of an Operations Admin. So this is not a new question I think, although I am having difficulty finding an applicable solution. Using SQL Server 2012 sp2 on a Windows
2012R2 server. This is configured to be a SCOM DB server; while on the SQL server itself I open IE and attempt to go to the following URL http://scomsql/reportserver_SCOM I get the
following error.
Reporting Services Error
The permissions granted to user 'DOMAIN\user' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
SQL Server Reporting Services
I have looked at the Reporting Services Config. Mgr. and it looks like the Report Mgt. URL is set for port 80 and no SSL is configured. The rsreportserver.config file has the SecureConnectionLevel set to "0"
My domain account is listed under Security\Logins and holds the 'Server Roles' of public and sysadmin, 'User Mapping' is DBO for the 'ReportServer$SCOM' and 'ReportServer$SCOMTempDB' and the role membership shows db_owner and public for these as well.
Any assistance with getting this working would be greatly appreciated.
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!Hi Wasisname,
The Reporting Services error rsAccessedDenied occurs when a user does not have permission to perform an action. To troubleshooting this issue, please make sure that you have sufficient permission and the report server name is correct.
In fact, reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. On a new installation, only local administrators have access to a report server. In order
to grant access to visit the URL http://server:port/ReportServer to users, a local administrator must create a role assignment to define the tasks a user can perform. To solve this problem, please refer to the
following steps:
Start Report Manager by going to URL
http://scomsql/reportserver_SCOM.
Click Site Settings at the top right of the page.
Click Security in the left pane.
If a role assignment already exists for the user, click Edit.
Otherwise, click New Role Assignment. In user, enter the user account.
Select appropriate access, and then click Apply.
The issue may be caused by the UAC or Internet Explorer security setting, please try to follow this steps:
1. Open the Internet options of the IE and add the report server URL into trusted site in the Security tab.
2. Run the IE as administrator.
Besides, if the user need to have access to reports, folders, models and shared data sources, we can assign Item-level roles on the root node (the Home folder) or on specific folders or items.
For more information about Configuring a Native Mode Report Server for Local Administration, please refer to the following document:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support -
SQL Server Express 2012 SP2 installation hangs during extract phase
Greetings!
I am having an issue with trying to silent install SQL Server Express 2012 SP2 (x86).
I have a proprietary installation framework, which is calling the SQL Server Express installer.
The SQL Server Express installer starts extracting files to c:\{some guid}. The folder reaches about 11 mb in size, and then nothing further happens. No activity on the machine, CPU or disk - I have waited up to 15 minutes to verify this. On the normal installation,
the size of this folder is ~650 mb.
Here are the things I've also tested:
- I'm experiencing these symptoms on both Windows 7 and Windows Server 2012 R2 (haven't tested other platforms)
- If I launch exactly the same command from the command prompt, the installation goes through as normal
- If I replace the SQL Server Express 2012 SP2 with SQL Server Express 2012 SP1, and install via our installation framework, the installation goes through as normal
- I have checked and double-checked that our installation framework is started with administrative privileges.
- From my previous search attempts, I have seen issues where the installer would hang or fail when launched from inside an msi, which would result in a log in C:\Program Files (x86)\Microsoft SQL Server\<something something>. These are not the symptoms
I am experiencing. The C:\Program Files (x86)\Microsoft SQL Server\ folder is not even created!
Any suggestions, or places I can look to figure out why it's not proceeding? For now, I have worked around the issue by including SP1 instead of SP2, but ideally I'd like to base my solution on the most recent service pack.Hello Alberto!
The installation framework does check for this. I'm also certain that these prerequisites are fulfilled.
When the SQL Server process hangs, I can kill the process, copy/paste the exact command that was executed from the installation framework's log files, and execute that command in a command prompt - and then the installation runs as expected.
The installation framework installs SQL Server Express correctly if I use the 2008 R2 SP1 express or the 2012 SP1 Express installer. It's just the SP2 installer that is giving me problems.
The only difference I can think of is that the installation framework is a 32-bit process, which calls the SQL Server installer, while the command prompt is a 64-bit application. I am installing the SQLEXPR_x86_ENU.exe
from http://www.microsoft.com/en-us/download/details.aspx?id=43351, so it should be compatible with my 32 bit environment -
"SQLEXPR_x86 is the same product but supports installation onto both 32-bit and 64-bit (WoW) operating systems"
Tomorrow, I will try:
- Installing on Windows 7 32-bit
- Trying to launch the SQL Server installer from a powershell (x86) prompt, to emulate a 32-bit environment on a 64-bit machine -
Variable Text not working as dynamic header in Crystal report
Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
LuqmanPost your question BEX and B1 and classic SAP data source issues to the Integration Kit forum
-
Dynamic Header for a website. DOUBLE POINTS FOR ANSWER!!
I don't even know where to start with this one, let me try explain this:
I am looking for ideas on how to create some sort of dynamic header for an affiliate website, we have launched a new affiliate program for http://www.africancures.com/ the affiliate program is done through 1shoppingcart.com and each affiliate is given an ID like:
http://www.1shoppingcart.com/app/?af=812264
Once the affiliate signs up they choose their own website URL like: mikeshealth.com, then we point the affiliate URL mikeshealth.com to http://www.1shoppingcart.com/app/?af=812264 which in turn comes to our main website: http://www.africancures.com/ now here is where the problem comes in, how do I make the website display Mikes Health instead of African Cures .
I hope I was able to explain this well enough as it seems to be a bit confusing to me when I write it down. I really hope there is someone out there who has worked on something like this before or if there is someone who thinks they know how to do this.
Thank you
So here is something else I was thinking of, but I am not much of a programmer anymore:
Have a list of all the affiliate ids and their corresponding website names, eg:
Affiliate ID=812264 Website name= Mikes Health, then when someone comes to the site the jave works out which affiliate id sent them to the site, eg
Get(AffiliateID)from Refering.URL then Display.Header(AffiliateID) on main page, do you think you could help me now Sabre150?I'm still trying to see what this has to do with Java. Each host name such as mikeshealth.com will need to be registered with name servers with the IP address of www.1shoppingcart.com. Your web server will then need to be configured to perform perform any mapping.
Again, what has this to do with Java? -
Hi all,
I created an Adobe Form and defined on the MasterPage a header, a footer and a main area (content are) in-between. The areas were defined with a fixed size (somehow it was the only way because "fit height" and "fit width" was innactive).
Because the form is used in different countries the amount of information in the different areas is not the same. Therefore I am looking for a dynamic header and footer (and main area). That should help to optimise the space exploitation on a page. The header should grow from top of the page down, the footer bottom up and the main area fill the gap.
I know that this is a very sophisticated demand. Nevertheless, I hope that someone else had similar ideas and could solve that task.
I appreciate any help, hints and good advices which leads to a solution of my problem.
Thanks & regards,
PhilHi Andres,
thanks a lot for your quick answer!
In your MasterPage, add only the items that will remain static during the execution.
Every object that will behave in a dynamic manner should go in the BodyPage.
Very good hint, thanks!
What you can do is set a Subform with flowed Western Text between your Header/Footer
(Static) of your MasterPage. Within that main Subform set three more, "Western Text" as well.
One will be for your Dynamic Header, the middle one for your Main and the bottom one for your
Dynamic Footer.
I think I did not really get it! As far as I understand this works for one page...my form - when filled with data - can have more than one page!
Some questions came up when I read your solution:
1) why is the flowed content "western text" and not "top to bottom"?
2) what happens exactly with the area of the static header / footer? It's above the dynamic header and below dynamic footer -> is that space not wasted in the end?
3) The dynamic footer is directly below the main area - not necessarily at the bottom of the page!?
4) How is the "pagination" defined for each of the three dynamic areas (header / main / footer)?
I hope you'll find the time to answer my question soon!
Thanks & regards,
Phil -
Dynamic Header (OBI report)
Hi
I have just started working on OBIE. Need some suggestions. Is there a way to put a dynamic header in the report.
Eg: I want to display a text in the header as "Sales Report for Alabama" where Alabama is the state coming from the State prompt.
I dont find any formula editor in the edit Title view. Where can i write a formula to display this text.
I would appreciate any suggestions.
Thank YouYou have successfully created your presentation variable in the prompt? I guess it will be something as 'State'
Now you go to your report and you edit the title view of your report;
In the title you put @{State} (the name of your presentation variable is case sensitive!)
Save your report and put it together with the prompt on the dashboard. Once you select a state in the prompt, the report title should change automatically.
KR,
A -
Hi
I have a requirement to display Dynamical header in ALV.
I am displaying the SUM of my list in ALV header . This I am able to do , as I can calculate before displaying ALV for the first time.
But when the user filters the list the SUM should change according to the new entries displayed after filtering .
How can i do this .
Line: -
All the helpful answers will be rewarded for sure.
Thanks.
Regards,
Sandeep.fieldname type slis_fieldname,
tabname type slis_tabname,
seltext(40),
valuf(80),
valut(80),
valuf_int(80),
valut_int(80),
sign0(1),
sign_icon(4),
optio(2),
stype(1),
decimals like dfies-decimals,
intlen like dfies-intlen,
convexit like dfies-convexit,
edit_mask type slis_edit_mask,
lowercase like dfies-lowercase,
inttype like dfies-inttype,
datatype like dfies-datatype,
exception(1) type c,
no_sign(1) type c,
or(1) type c,
order type order,
cqvalue(5) type c,
ref_fieldname like dfies-fieldname,
ref_tabname like dfies-tabname,
ddic_outputlen like dfies-outputlen,
The following are the example code for filter settings.
lv_filter-fieldname = u2018FIELDNAMEu2019.
lv_filter-valuf_int = u2018VALUEu2019.
lv_filter-sign0 = u2018SIGNu2019.
lv_filter-optio = u2018OPTIONu2019.
APPEND lv_filter TO gt_filter_list.
Where gt_filter_list is of type slis_t_filter_alv.
This populated internal table is then passed as the import parameter u2018it_filteru2019 of the display ALV FM.
I hope this help u...! -
Dear Vinod,
IMHO i don't think this is a spec dumping. I did try to search and even tried hands on it. Unfortunately i didn't get any luck with that.
Morever i'm not asking for any spoon feeding...It's just about some pointer's or any ideas that would help me.
Hope that clarifies much better.
Thanks in advance,
Arya.
My selection screen has a parameter P_WEEK.
Suppose if user enter's a week no for ex: 5. My ALV header should display as
Week5 Week6 Week7 Week8 Week9 Week10
i.e. Up to next 5 weeks. How to design a ALV that would display a dynamic header?
Any ideas or suggestion would be of great help.
Thanks,
Arya
Moderator message : Search for available information. Moved to basic(points-free) forum.
Edited by: Vinod Kumar on Oct 19, 2011 3:37 PM
Edited by: arya.soumya on Oct 19, 2011 12:22 PM
Edited by: Suhas Saha on Oct 19, 2011 4:08 PMHi,
you just try to write below logic in TOP-OF-PAGE routine in your program.
parameter: p_week(3) type c.
Form top_of_page .
do p_week times.
pass the required data to your internal table and append it.
enddo.
Endform.
Ram.
Maybe you are looking for
-
Best Buy needs to change their delivery policy
I ordered a small electronic item, and have been going through a hassle to get it. It is being shipped by UPS, which has been totally uncooperative. I waited at home until after 5 p.m. yesterday, and then had to leave for an appointment. UPS attemp
-
Interactive objects disappear in Reader 9.
I don't know if anyone else is having this problem and I can't seem to find anything when I google it. I'm using Indesign CS3 to create a form with interactive objects such as checkboxes and pop-up windows. I then use Acrobat Pro 8 to add text fields
-
N80 FREEZING/CRASHING/SLOOOOOOOW
If anyone can help me that would be wicked! Had my N80 for about 12 months now, worked fine when i got it. Now all of a sudden it constantly freezes when i try and go into anything like messages,gallery etc.Its very very slow and crashes and freezes
-
Notification won't turn off!
Turned on audible notification for emails before Xmas, turned it off on January 2nd, but it keeps going on!!! Anything to do with the DND bug which goes away on January 7th?
-
How to create a all virtual machines collection.
I need to create a collection of all virtual machines. There are only hyper-v VMs. I thought it would be an Attribute of the System Resource attribute class, but I don't see anything there. TechNetX