Dynamic inser uielement in a group of view

Hi I have created a view.
in wdDoModifyView of the view i have created a inputfield than adding it to a trasparent container.
this is ok
the problem is adding a dynamic imputfield in a group of my view.
I have created a group wiht instruction "IWDGroup group = (IWDGroup)view.getElement("group1")" where group1 is my static group generated in my view.
the instuction group.addchild(imputfield) don't work good as well as container.addchild(imputfield).
the error is java.lang.NullPointerException
please help me thenks

That to me seems like a bug in Yosemite.
Apple Feedback http://www.apple.com/feedback/
Bug Reporter https://bugreport.apple.com/

Similar Messages

In a document library : group by view and manage metadata filter & Navigation problem

Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
navigation :
- all the documents appear under my group by, even the ones that does not correspond
- In the other hand, the number in brackets shows the correct number of documents that should be shown
See screenshot below.
Did you already encounter that issue ? Is there a workaround ?

Hi,
According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
to show the corresponding documents with the correct numbers in SharePoint 2013.
In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
library. As a result, it showed only items matching the filter values.
So, I recommend that you can follow the steps to implement it in your environment.
Step1: Enable Metadata Navigation and Filtering:
Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
If it is not enabled for your site, you can enable it on the Site Features pages for your site.
You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
1. Go to “Site Settings” and click “Manage site features” under Site Actions.
2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
Step2:
Configure Metadata Navigation:
You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
1. Open the document library for which you want to configure metadata navigation.
2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
7. Click “OK”.
Step3: Set a group by two columns by modifying view in the document library:
1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
3. Click “OK”.
Step4:
Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
The result will like as below:
There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
Best Regards,
Linda Li
TechNet Community Support

Multi level grouping in views

Hi
I am using SharePoint 2013, I wanted help on how to do multi level grouping in views.
The view should be like as follows:
-Category1
-Level1
-Title1
data
-Category2
-Level2
-Title2
data

http://social.technet.microsoft.com/Forums/sharepoint/en-US/7085c62f-ee31-4655-bca9-0d4cef946374/multi-level-grouping-issue-in-sharepoint-2010?forum=sharepointgeneralprevious
previously asked questions contain a link to:
http://techtrainingnotes.blogspot.in/2011/01/sharepoint-group-by-on-more-than-2.html
The article basically describes how to create and use a DVWP instead of a XSLT List View. The out of the box SharePoint list view cannot have more than two groups. You need to either edit the View page and add a DVWP or create a new page with a DVWP.
SP 2010 view pages lose some functionality if web parts are added (showing ribbon is not as straightforward and view selector disappears), but there are workarounds.
In some cases, a Web Part Page with a DVWP may be a better alternative.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/82e7123d-9ff1-430b-a43c-0b937185574f/multiple-level-grouping-and-counting-help-in-sharepoint-designer?forum=sharepointcustomizationlegacy
http://suguk.org/forums/11092/ShowThread.aspx

Hiding report title in Group Tree View Pane

In a .rpt file, if I provide a Group Field, it is displayed in the "Group Tree View" when I preview the report.
The Group Tree View pane also contains the name of the report - actually the title. Is there a way that I can choose not to show report title on this pane?
Here is my requirement:
I'm localizing the report file and that includes localizing group names too. I've also localized the report title by using a formula and displaying the formula in the report header. But this pane - Group Tree View - uses report title from "Special Fields", which I'm not able to modify. So I'm always getting the non-localized report title displayed on this pane, which I want to avaid somehow.
If I remove report title from the report properties, this pane shows report file name instead, which again i do not want to be displayed.
Rgds,
Chris

After removing the report title from the report properties try to place a space " " in the report title field in summaryinfo so that a blank space is shown in the group tree.
Regards,
Raghavendra

Users group for View not for publish

Hi guys,
Does anybody can tell me how can I creat users group for view
and not for publication?
It's something like to create Contribute roles, but is not
related with the permission levels to publish, but with the
visualization permissions for exclusivy content, for ex.:
Home (open for all users)-------- IT Dept--------Directory
Dept ---------Support Dept
- Johny - Johny - Joseph - Isaac
- Jack - Jack - JJ - Jason
- Rose - Rose - Robert
- Joseph - Lisa
- JJ
- Isaac
- Jason
- Robert
- Lisa
Please somebody help me, It's very, very important!!!
Thanks in advance for who can help me.
San.

Sandra Bercke wrote:
> Hi guys,
> Does anybody can tell me how can I creat users group for
view and not for
> publication?
> It's something like to create Contribute roles, but is
not related with the
> permission levels to publish, but with the visualization
permissions for
> exclusivy content, for ex.:
>
> Home (open for all users)-------- IT
Dept--------Directory Dept
> ---------Support Dept
> - Johny - Johny - Joseph
> - Isaac
> - Jack - Jack - JJ
> - Jason
> - Rose - Rose
> - Robert
> - Joseph
> - Lisa
> - JJ
> - Isaac
> - Jason
> - Robert
> - Lisa
>
> Please somebody help me, It's very, very important!!!
>
> Thanks in advance for who can help me.
>
> San.
>
You cannot restrict on the users to view a particular folder
(say IT
dept) using contribute. Infact there is a setting in IIS
Webserver which
allows you to set an Authentication mechanism where users
when browsed
to any site on your webserver will be prompted for username
and password.
But you might want to try something like this.. not sure if
this will
help you...
1. Create 4 connections in contribute
a) first connection to "Open for all users" directory on
your webserver.
b) second connection to "IT Department" directory on your
webserver.
c) third connection to "Directory dept"... etc
2. This way you can administer 4 sites and send connection
keys to them
accordingly...
Hope this helps.

I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"

Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE

This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman

How to dynamically change the table name inside a view

Hi All,
create table t_auto_feeds
id number,
table_name vachar2(100));
insert into t_auto_feeds values(1,'T_FEED_POSITIONS');
insert into t_auto_feeds values(2,'T_KAP_MTM');
assume there are 100 records on id=1 in T_FEED_POSITIONS and 100 records of id=2 in T_KAP_MTM (id 1 is present only in t_feed_positions & id 2 is present only in t_kap_mtm)
i need to create a view such that it needs to give the count of records based on the id
create or replace view aa_view as
select count(*), id from t_feed_position group by id
union
select count(*), id from t_kap_mtm group by id;
I am getting a proper result when i query the view like select * from aa_view where id=1 but will the other union query seems to be a overhead?. I am having 10 such tables configured for different id in t_auto_feeds.so do i need to put 10 unions or is there a better way to handle this stuff.
I know i can use a PLSQL block and dynamically build view structure, the problem is the view itself is configured in a table , so i cant write a proc for this.. can this aa_view be modified such that it queries only the table(using the t_auto_feeds ) which matches the id rather than the entire list.
Kindly help me in this regard and let me know in case u need any further information from my side.

>
so do i need to put 10 unions or is there a better way to handle this stuff.
>
Yes - you need 10 unions
Yes - there is a better way so that only one of the 10 queries does anything.
You can use SYS_CONTEXT to control the query selection.
Here is an example of using SYS_CONTEXT. Try this code in the SCOTT schema.
create or replace context VIEW_CTX using SET_VIEW_FLAG;
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
SELECT * FROM THREE_TABLE_EMP_VIEWNote that you set the context for the table you want. This doesn't have to be a table name it could just be flag value
-- use the emp table
exec set_view_flag( p_table_name => 'EMP' );
-- ue the emp1 table
exec set_view_flag( p_table_name => 'EMP1' );
-- use the emp2 table
exec set_view_flag( p_table_name => 'EMP2');

Many times dynamic generate UIElement at Runtime ???

Hello Everyone,
I wanna generate a UIElement (InputField) at runtime. When man click a button "Add InputField", then a UIElement (InputField) is dynamic generated. Man can generate many times UIElement"InputField" with this button.
I have tried the Webdynpro Tutorial 17. But not yet any idea.
Plx give me some suggestions and code.
Thanks in advance
best regards
Yaning

hi
for this create 2 int variables act and a counter
//@@begin others
static int act,counter=0;
//@@end
in Doinit set act to 0.
public void wdDoInit()
 //@@begin wdDoInit()
 act=0;
 //@@end
create an action(onActionCreate_Element) and assign it to the button ui element
public void onActionCreate_Element(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreate_Element(ServerEvent)
 act = 1;
 //@@end
in wdDoModifyView
public static void wdDoModifyView(IPrivateDynamicView wdThis, IPrivateDynamicView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 if( act== 1)
 IWDTransparentContainer con= (IWDTransparentContainer)view.getElement("RootUIElementContainer");
 IWDInputField input = (IWDInputField)view.createElement(IWDInputField.class,"input1"+counter);
 IWDAttributeInfo test = wdContext.getNodeInfo().addAttribute("name"+counter,"ddic:com.sap.dictionary.string");
 input.bindValue(test);
 input.setVisible(WDVisibility.VISIBLE);
 counter++;
 con.addChild(input);
 act = 0;
 //@@end

Dynamic creation of Radio Button Group

Hi,
I need to create a Radio Button Group dynamically and add Radio buttons to it.
I am able to create the Radio buttons dynamically. Could someone help me how to create Radio Button Groups.
I tried creating the Radio Button Group using the following code
              DATA : lr_radiobuttongrp type REF TO CL_WD_RADIOBUTTON_GROUP_BY_IDX.
              call method CL_WD_RADIOBUTTON_GROUP_BY_IDX=>NEW_RADIOBUTTON_GROUP_BY_IDX
              EXPORTING
                bind_texts = 'test'
              RECEIVING
                control = lr_radiobuttongrp.
              cl_wd_matrix_head_data=>new_matrix_head_data( element = lr_radiobuttongrp ).
              lr_container->add_child( lr_radiobuttongrp ).
But when I run it I am geting a dump "subnode viewname.ME does not exist".
Thanks,
Suvarna.
Edited by: Suvarna Chittor on Aug 12, 2008 12:10 PM

what is 'test' in bind text parameter
you should provide the name in Capitals along with the node name,
if the node name is TEXTS and the context attribute under this node is TEXT then you have to pass
TEXTS.TEXT
also provide the VIEW parameter to the call
Abhi
Edited by: Abhimanyu Lagishetti on Aug 12, 2008 12:26 PM

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

In Address Book, any way to Show/Hide groups from view in the "ALL" view?

I have groups of contacts in Address Book (v4.0.4) that I plan to use in the future, but right now having to wade through and past all of their individual entries when I am scanning my contact list in the "All" group view. Is there any way to Show/Hide these sub-groups with a visibility check-box? The sub-group name would still be there in the group list (to remind me that it exists and make it visible if desired), but I would have a lot less clutter and scrolling the rest of the time.
I know I can export groups in vCard format and re-import later, but a lot of my original custom fields for the contacts are lost in the process. Is there a 3rd-party plug-in? (Apple, are you working on something like this?)

Hi Mike, My Address Book app is behaving correctly (maybe I'm not).
I'm just saying there are times when I want to see "most" of my total collection of contacts, maybe just for the purpose of creating new groups at particular time and want to see at one time the pool of contacts I have to choose from. There are groups that I very seldom need to use, so it would be a way of putting those groups (and their contacts) into "cold storage."
I also may want to do searches from among most of my contacts, but also I may want to eliminate certain other particular groups from that search pool. That is the reason for wanting to do the "Show/Hide" thing. It is a way of displaying a logical "ALL" minus "SOME", which is the basically same thing as displaying the logical "UNION" of more than one group of contacts at one time. Can this be done?
Is there a way to open alternate address books, from within the same Address Book app (and logged in as the same user)? That would allow me to truly isolate my work list from my home list.
One answer to this occurs to me: I could create different log-ins on my PowerBook, and build the different variants of the Address Book I might want into each login and use Fast User Switching to get into each list of contacts. That seems like a lot of extra work . . . and logging in. Any suggestions?
Scott

Allow group to view a list view web part but not the original list?

I have a list that contains a lot of details about current active projects our team is working on. I created a public list view that presents this list in a concise format for external viewers to see and have it on a separate page in a web part; however,
we need to keep the original list (and all the extra data private).
How can I keep the original list restricted, but allow permissions to the data that is in that public list view?
I have already set up the page permissions and they are able to see the page, but the list has no data and displays a message that says "There are no items to show in this view of the "Projects" list.".

There's no way to do this that I'm aware of without some kind of custom programming. You could easily create a custom web part that runs with elevated permissions to get the data and display it in a read only fashion. But to display data in
any kind of out of the box web part users need permissions to see the data.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

A dynamic table based on run-time created view object -- please help!

Hello!
I'm trying to create a dynamic table based on an run-time created view object. All go ok, but table binding component take the first view/iterator state and don't reflect changes they have. Please, take a look:
1. At run-time the view is being replaced by new red-only one based on query in application module:
getQueryView().remove();
createViewObjectFromQueryStmt("QueryView", statement);
2. Page definition file contains an iterator (using iterator or methodIterator - doesn't matter) binding and table, which binds to the iterator, like:
<methodIterator id="distributeQuery1Iter" Binds="distributeQuery1.result"
DataControl="QueryServiceDataControl" RangeSize="10"/>
<table id="distributeQuery11" IterBinding="distributeQuery1Iter"/>
3. The page code uses <af:table>. But, if I use table binding (it's right) like this:
<af:table var="row" value="#{bindings.distributeQuery11.collectionModel}">
<af:forEach items="#{bindings.distributeQuery11.attributeDefs}" var="def">
the table will never changed (i.e. still show the first view instance).
When I tried to use iterator binding directly (it's bad and cannot provide all needed features unlike CollectionModel from table binding) I saw that table works!
(Code is somehing like:
<af:table var="row" value="#{bindings.myIterator.allRowsInRange}">
<af:forEach items="#{bindings.myIterator.attributeDefs}" var="def">
Why the table binding do not reflect changes in iterator? Or should I use different approach?
Thanks in advance!
Ilya.

I got it to work! I used a hybrid approach comprised of some of your code and some of Steve Muench's AcceessAppModuleInBackingBean example.
In the setBindings method, I execute an app module method that redefines the query, then I used your code to delete and recreate bindings and iterator:
public void setBindingContainer(DCBindingContainer bc) {
this.bindingContainer = bc;
rebuildVO();
The rebuildVO() method looks like the code you provided in your example:
private void rebuildVO() {
DCDataControl dc;
DispatchAppModule dApp;
DCBindingContainer bc;
DCIteratorBinding it;
OperationBinding operationBinding;
ViewObject vo;
DCControlBinding cb;
try {
bc = getBindingContainer();
dc = bc.findDataControl(DATACONTROL);
dApp = (DispatchAppModule)dc.getDataProvider();
// Execute App Module Method to rebuild VO based upon new SQL Statement.
dApp.setDispatchViewSQL();
vo = dApp.findViewObject(DYNAMIC_VIEW_NAME);
it = bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME);
it.bindRowSetIterator(vo, true);
// logger.info("Remove value binding...");
cb = bc.findCtrlBinding(DYNAMIC_VIEW_NAME);
cb.getDCIteratorBinding().removeValueBinding(cb);
bc.removeControlBinding(cb);
// logger.info("Creating new value binding...");
FacesCtrlRangeBinding dynamicRangeBinding =
new FacesCtrlRangeBinding(null,
bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME), null);
// logger.info("Add control binding...");
bc.addControlBinding(DYNAMIC_VIEW_NAME, dynamicRangeBinding);
} catch (Exception e) {
e.printStackTrace();
And my App Module method that redefines the view object looks like this:
public void setDispatchViewSQL() {
String SQL =
"begin ? := PK_BUsiNESS.F_GETDISPATCHVIEWSQL();end;";
CallableStatement st = null;
String ViewSQL = null;
try {
st = getDBTransaction().createCallableStatement(SQL,
DBTransaction.DEFAULT);
* Register the first bind parameter as our return value of type LONGVARCHAR
st.registerOutParameter(1, OracleTypes.LONGVARCHAR);
st.execute();
ViewSQL = ((OracleCallableStatement) st).getString(1);
findViewObject(DYNAMIC_VO_NAME).remove();
ViewObject vo = createViewObjectFromQueryStmt(DYNAMIC_VO_NAME, ViewSQL);
vo.executeQuery();
} catch (SQLException s) {
throw new JboException(s);
} finally {
try {
st.close();
} catch (SQLException s) {
s.printStackTrace();
When I run it I get my desired results. One thing I don't quite understand is why when the page is first rendered it shows the last set of records rather than the first. Now I have to figure out how to put navigation URLS in each of the table cells.
Thanks for your help; I would not have gotten this far without it,
Jeff

TOC Status for a slide doesn't update until all of group is viewed (Cap 5)

I'm having some trouble understanding some behavior I'm seeing with the TOC status flag. It's my understanding that, in Captivate 5, the status flag only appears after you reach the end of a slide. In newer versions, that has changed so that a user need only view a slide to trigger the status flag.
Either one of those would be acceptable to me, but I'm experiencing something different. My TOC is structured so that only the first slide in a slide group appears in the TOC, such that these are more like chapter stops than granular, slide-level navigators (I have 174 slides in the project, so chapters are more digestible). Entries in the TOC do not show completion unless all slides in the chapter have been viewed, not just the initial slides which populate the TOC. This becomes a problem in specific chapters, ones in which I turn things over to the user to interact with the demo software and involve some branching, that do not show completion unless every slide in that chapter are touched. Why is this? Shouldn't the TOC depend only on the slides shown in the TOC? If so, I can ensure that opening slide to a chapter, the one populating the TOC is viewed to completion. Instead, this appears to be tied to the branching within these chapters, even though those slides aren't represented in the TOC.
To be clear:
I'm only concerned with this status flag in the TOC; I'm not concerned about completion reporting for the course as a whole (I handle that in a different way).
I've set the activity launch button on the initial chapter slide to "Continue" to the next slide, ensuring the slide is viewed to completion.
I can reliably reproduce that the status flag does not appear unless every slide in the chapter/group has been viewed, and that it definitely does appear when every slide has been viewed.
This does not vary with the grouping of the slides; I removed the group and experienced the same status behavior.
I'm aware of the TickTock widget, may resort to it if necessary, but I'm perplexed by what I thought would be straightforward behavior.
I'm not concerned with a rigorous check that users have completed every slide; I simply want the TOC to show that a chapter has been visited, and for that purpose viewing the initial slide for the activity is good enough for me.
Any ideas?

Thinking bit out of the box, when I read your question. To show that a chapter has been visited, shouldn't a custom menu (or dashboard) be a better solution than trying to use the canned way with TOC? Something like the example in this post:
Captivate 8 - First Adventures - Captivate blog
I know this is for CP8, but long time ago I offered even a template for CP5
Template for reusing script? - Captivate blog
For that old version advanced actions could only be transferred to a new project using a template. And shared actions were still far away.

Dynamic inser uielement in a group of view

Similar Messages

Maybe you are looking for