Dynamic Lookups in OIM 11gR2

Hi,
Is it possible to have dynamic look up . Seems lookup query is no more supported.
any pointer will be helpful.
thanks in advance.

http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABFFACA
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABFFACA

Similar Messages

OIM 11gR2 user not provisioning to Active Directory (11.1.1.5 connector)

Hello all,
I'm trying to set up an OIM 11gR2 instance to work with Active Directory with the Active Directory 11.1.1.5.0 connector. I've full installed both OIM and AD on separate servers, and I've installed the AD 11.1.1.5 connector on OIM. I have configured Active Directory properly (connector on OIM and the connector server on the AD server-side), and have set up the two IT Resources on OIM. I can run, for example, the Active Directory Organization Lookup Recon job and have it return results in the Lookup window.
My problem is that I cannot get it to provision to a user. I've created an Application Instance and Form for Active Directory, attached the Form, associated them with the appropriate resources (AD User), and added them to the Catalog, and then gone through the process of adding an account to the user, selecting the Application Instance, adding it to the cart, checking out, filling out the fields (Password, User ID, UPN, First Name, Last Name, Common Name, and Organization Name), and then submitting the request. This is all done as the xelsysadm admin user, but it still results with the account stuck on "Provisioning" because the "Create User" task failed due to a Connector Error (the reason stated is just a repeat of "Create Object" failed).
Anyone know what I'm missing here?
Thank you!
Edited by: 939908 on Nov 12, 2012 6:36 AM

Hey 833249, thanks for your reply
The organization field attribute is filled in correctly, in that the OU I selected exists in AD.
These are the errors listed in the connector server log:
+11/9/2012 9:07:07 PM <ERROR>: Class-> ActiveDirectoryUtils Method -> GetDirectoryEntry, Message -> Exception occured during the creation of directory entry.+
+11/9/2012 9:07:07 PM <ERROR>: Class-> ActiveDirectoryUtils Method -> GetDirectoryEntry, Message -> Exception Message : Logon failure: unknown user name or bad password.+
+11/9/2012 9:07:08 PM <ERROR>: Class-> ActiveDirectoryUtils Method -> GetDirectoryEntry, Message -> Exception Stack Trace : at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)+
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_NativeObject()
at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.GetDirectoryEntry(String path, ActiveDirectoryConfiguration configuration) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 1423
+11/9/2012 9:07:08 PM <ERROR>: Class-> ActiveDirectoryConnector Method -> Create, Message -> Encountered Excetion: Unable to get the Directory Entry+
+11/9/2012 9:07:08 PM <ERROR>: Class-> ActiveDirectoryConnector Method -> Create, Message -> Stack Trace: at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.GetDirectoryEntry(String path, ActiveDirectoryConfiguration configuration) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 1456+
at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.DirectoryEntryExists(String path) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 1512
at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.Create(ObjectClass oclass, ICollection`1 attributes, OperationOptions options) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line 219
ConnectorServer.exe Error: 0 : Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: Unable to get the Directory Entry
at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.Create(ObjectClass oclass, ICollection`1 attributes, OperationOptions options) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line 368
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.CreateImpl.Create(ObjectClass oclass, ICollection`1 attributes, OperationOptions options) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 388
at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke(Object proxy, MethodInfo method, Object[] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 244
at ___proxy1.Create(ObjectClass , ICollection`1 , OperationOptions )
at Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest(OperationRequest request) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609
I'm not sure why the username/password error could be occurring, as those fields in the AD IT Resource are correct (I've run AD recon jobs that have connected properly). Is there something I'm missing?

OIM 11gR2 Add combo box UDF on Create User Form

Hi.
We have created a new UDF on user form. It is a lookup field and has the following lookup associated: "Lookup.Users.Continente"
"Lookup.Users.Continente" has two values, both of them checked as Enabled.
From the form designer all the values are displayed when selecting one default value so it is reading correctly from the lookup.
We published the sandbox after this.
Then we created a new sandbox and tried to add that field to the Create User Page. We went to "Create User Page", customize it and add content from "Data Component - Catalog" -> "userVO" -> Select the UDF, clicked on "Add" and selected "ADF Select One Choice".
A new combobox is added but no values are shown. We have plublished the sandbox, restarted OIM, purged cache, etc... but it still shows an empty combo box. We have also tried adding it as "ADF Input List of values" but it does not add the field to the create user page.
Any ideas of what are we doing wrong?
The idea is very simple, just create a field with the same behaviour as, for example, "User Type" field. A combobox that displays the enabled values from a lookup...
We have also tried creating the UDF cheking the searchable option, searchable picklist and all the possible combinations.
Thanks in advance!!

oim version is oim 11gR2 with BP4

OIM 11gR2 - custom attribute with illegal binding on Create User form in published sandbox

Hi,
I think I have managed to paint myself into a corner!
In OIM 11gR2 I have added a number of custom attributes to the "User Form" - some Text-, some Lookup-type attributes.
While customizing the "Create User" page within a sandbox and adding a SelectOneChoice item and fiddling around with its binding, I was distracted by a phone call and the browser timed out.
The binding property on the new item is now not correct and the sandbox has unfortunately been published, and I am now unable to enter the "Create User" page - when I try, I get the following:
<Sep 23, 2013 2:39:11 PM CEST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /user/createView URI: /oracle/iam/ui/runtime/form/view/pages/userCreateForm.jsff actual-URI: /oracle/iam/ui/runtime/form/view/pages/userCreateForm.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
        at com.sun.el.parser.AstValue.getTarget(AstValue.java:108)
        at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:149)
        at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:248)
        at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
        at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
        at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:128)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:340)
<Sep 23, 2013 2:39:11 PM CEST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /catalog-tf/cart-details URI: /oracle/iam/ui/catalog/pages/cart-details.jsff actual-URI: /oracle/iam/ui/catalog/pages/cart-details.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
        at com.sun.el.parser.AstValue.getTarget(AstValue.java:108)
        at com.sun.el.parser.AstValue.isReadOnly(AstValue.java:149)
        at com.sun.el.ValueExpressionImpl.isReadOnly(ValueExpressionImpl.java:248)
        at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
        at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
        at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:128)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:340)
Caused By: java.io.IOException: javax.el.PropertyNotFoundException: Target Unreachable, 'ekstraresource1__c' returned null
        at oracle.adfinternal.view.page.editor.renderkit.PageCustomizableRenderer.encodeAll(PageCustomizableRenderer.java:764)
        at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
        at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
        at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
etc.
Of course the sandbox should not have been published - but it is - and I am stuck trying to figure out how to somehow undo this mess.
Is it possible to clean up this mess by diving to the database and removing some rows from the right tables - or perform some other operations undo my mistake?
Thanks in advance,
- Tom

oim version is oim 11gR2 with BP4

OIM 11gR2 Active Directory integration issue

Hi,
I am trying to install AD connector on OIM 11gR2 and have successfully performed all the necessary and relevant steps according to the deployment guide.
When i am trying to test the connector though, by running the "Active Directory Organization Lookup Recon" scheduled job i am getting the following error:
Exception Message oracle.iam.connectors.icfcommon.exceptions.Integration
Exception: The value for a key [Host] is not defined in the provided map.
Kindly help me out with this
Best Regards,
Varun

Hi,
i hope you are using the AD New connector(i.e. ICF based ) and your connector server key is not set properly. Most of the cases this is arises because of connector parameters. So verify the connector parameters and also have you put the AD connector jars on connector server side.
_Saurabh

Provisioning users to AD groups in OIM 11gR2

I could use some advice on how to resolve this issue I am having.
Using the Active Directory connector (11.1.1.5) in our OIM 11gR2 development environment I can successfully provision OIM users to our AD resource. I have successfully run the org and group lookup recons, and provisioned users do go into the correction ou in AD.
However when I select which groups a user should be a member of in the ADUSERC child form (via the lookup), the user is not provisioned with the correct group membership in AD.
A separate issue is how to map the objectClass in AD in the ProvAttrMap; could anyone point me in the direction of how to go about that?
Thanks

The ObjectClass should be configured in this lookup Lookup.Configuration.ActiveDirectory
Check below
http://docs.oracle.com/cd/E22999_01/doc.111/e20347/extnd_func.htm#sthref221
4.6 Configuring the Connector for User-Defined Object Classes

Webservice Client is not working in OIM 11gR2

Hi,
We have created a web client using Axis 1.6.2 and using it in OIM 11gR2 for Request Validator Plugin. But we are getting issue that org.apache.axiom.om.OMAbstractFactory. getOMFactory() is not found. When we checked the JARs in class path we found that OIM Already has lower version of axiom1.2.5 in its class path under oim.ear which doesn't contain this method however Axis1.6.2 contains the newer version which contain this method. Does anybody has any idea how to override OIM default classpath JAR file and force it to read the library files available under plugin?

Hi
I am facing similar issue but with Custom Adapter . I copied the axis jars under the JavaTasks folder but it does not help.
I then copied them under the oim.ear/APP_INF/lib and restarted the OIM managed server but somehow even that does not help.
I get following error.
Caused by: java.lang.NoSuchMethodError: org/apache/axiom/om/OMAbstractFactory.getMetaFactory()Lorg/apache/axiom/om/OMMetaFactory;
        at org.apache.axiom.om.OMXMLBuilderFactory.createOMBuilder(OMXMLBuilderFactory.java:150)
        at org.apache.axiom.om.OMXMLBuilderFactory.createOMBuilder(OMXMLBuilderFactory.java:133)
        at org.apache.axiom.om.OMXMLBuilderFactory.createOMBuilder(OMXMLBuilderFactory.java:104)
        at org.apache.axis2.util.XMLUtils.toOM(XMLUtils.java:590)
        at org.apache.axis2.util.XMLUtils.toOM(XMLUtils.java:575)
        at org.apache.axis2.deployment.DescriptionBuilder.buildOM(DescriptionBuilder.java:97)
        at org.apache.axis2.deployment.AxisConfigBuilder.populateConfig(AxisConfigBuilder.java:90)
        at org.apache.axis2.deployment.DeploymentEngine.populateAxisConfiguration(DeploymentEngine.java:857)
        at org.apache.axis2.deployment.FileSystemConfigurator.getAxisConfiguration(FileSystemConfigurator.java:116)
        at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContext(ConfigurationContextFactory.java:64)
        at org.apache.axis2.context.ConfigurationContextFactory.createConfigurationContextFromFileSystem(ConfigurationContextFactory.java:210)
        at org.apache.axis2.client.ServiceClient.configureServiceClient(ServiceClient.java:151)
Any pointer on how I can try to resolve it.
Regards
Abhinav

Dynamic lookup in OWB

Hello All,
Is there any dynamic lookup in OWB, if so, please let me know how to implement the same OWB.
awaiting for your reply......

Hello All,
Is there any dynamic lookup in OWB, if so, please let me know how to implement the same OWB.
awaiting for your reply......

Dynamic Lookup in OWB 10.1g

Can we execute dynamic lookup in OWB 10.1g?
I want update the columns of the target table, based on the previous values of the columns.
Suppose there is a record in the target table with previous status and current status columns.
The source table consist of 10 records which need to be processed one at a time in a single batch. Now we need to compare the status of record with the current status of target table. If the source contains next higher status then the current status of target record need to go to previous status and the new status coming from source need to overwrite the current status of target record.
We have tried using row based option as well as setting commit frequency equal to 1 but we are not able to get the required result.
how can we implement this in OWB10.1g?

OK, now what I would do in an odd case like this is to look at the desired FINAL result of a run rather than worry so much about the intermediate steps.
Based on your statement of the status incrementing upward, and only upward, your logic can actually be distilled down to the following:
At the end of the load, the current status for a given primary key is the maximum status, and the previous status will be the second highest status. All the intermediate status values are transitional status values that have no real bearing on the desired final result.
So, let's try a simple prototype:
--drop table mb_tmp_src; /* SOURCE TABLE */
--drop table mb_tmp_tgt; /*TARGET TABLE */
create table mb_tmp_src (pk number, val number);
insert into mb_tmp_src (pk, val) values (1,1);
insert into mb_tmp_src (pk, val) values (1,2);
insert into mb_tmp_src (pk, val) values (1,3);
insert into mb_tmp_src (pk, val) values (2,2);
insert into mb_tmp_src (pk, val) values (2,3);
insert into mb_tmp_src (pk, val) values (3,1);
insert into mb_tmp_src (pk, val) values (4,1);
insert into mb_tmp_src (pk, val) values (4,3);
insert into mb_tmp_src (pk, val) values (4,4);
insert into mb_tmp_src (pk, val) values (4,5);
insert into mb_tmp_src (pk, val) values (4,6);
insert into mb_tmp_src (pk, val) values (5,5);
commit;
create table mb_tmp_tgt (pk number, val number, prv_val number);
insert into mb_tmp_tgt (pk, val, prv_val) values (2,1,null);
insert into mb_tmp_tgt (pk, val, prv_val) values (5,4,2);
commit;
-- for PK=1 we will want a current status of 3, prev =2
-- for PK=2 we will want a current status of 3, prev =2
-- for PK=3 we will want a current status of 1, prev = null
-- for PK=4 we will want a current status of 6, prev = 5
-- for PK=5 we will want a current status of 5, prev = 4
Now, lets's create a pure SQL query that gives us this result:
select pk, val, lastval
from
select pk,
val,
max(val) over (partition by pk) maxval,
lag(val) over (partition by pk order by val ) lastval
from (
select pk, val
from mb_tmp_src mts
union
select pk, val
from mb_tmp_tgt mtt
where val = maxval
(NOTE: UNION, not UNION ALL to avoid multiples where tgt = src, and would want a distinct in the union if multiple instances of same value can occur in source table too)
OK, now I'm not at my work right now, but you can see how unioning (SET operator) the target with the source, passing the union through an expression to get the analytics, and then through a filter to get the final rows before updating the target table will get you what you want. And the bonus is that you don't have to commit per row. If you can get OWB to generate this sort of statement, then it can go set-based.
EDIT: And if you can't figure out how to get OWB to generate thisentirely within the mapping editor, then use it to create a view from the main subquery with the analytics, and then use that as the source in your mapping.
If your problem was time-based where the code values could go up or down, then you would do pretty much the same thing except you want to grab the last change and have that become the current value in your dimension. The only time you would care about the intermediate values is if you were coding for a type 2 SCD, in which case you would need to track all the changes.
Hope this helps.
Mike
Edited by: zeppo on Oct 25, 2008 10:46 AM

Pre populate adapter in OIM 11gr2 not triggered in database

Hello,
Folowing is the steps for creation of pre populated adapter in OIM
** we have created one form in OIM which is provisioned to Database**
Steps
· Installed GTC connector for Database Web App 9.*
· Created new user and Table in Database
· Created IT resource for Database
· Created Sandbox, App Instance and Form, published sandbox
· Started catalog synchronization job scheduler
· Created user and and request account to app instance.
* select application instance to catalog and checkout.
** we have created adapter as per the following link
http://idmrockstar.com/blog/2009/08/how-to-create-a-prepopulate-adapter-in-oim/
create a pre populated adapter that will populate the firstname of user in email using java class
source code:
public class AdapterClass{
public String email( String fname )
return fname;
Steps:
1) In the design console I have open the Adapter Factory and create a new adapter name :firstname
adapter type: pre-populate rule generator
click on save
2) select variable list tab:
variable name:Firstname
type:String
Map to : Resolve at runtime
click on save
3) select Adapter Task tab
* click add and select logical task
* select SET VARIABLE and click continue
* Operand Type:variable
* Operand Qualifier : FIrstname
click save and save the adapter
4) compile the java class into jar file and move the jar file into OIM_HOME\server\JavaTasks
5)Create a new Adapter with the following"
Adapter name:Email
Adapter type: Pre-populate rule Generator
click save
6) select variable list tab:
variable name: var1
Type:String
Map to:Resolve at runtime and click save
7) select Functional Task tab:"
select java click continue
select the following information:
Task name:email
Api source: JavataskJar:Adapterclass.jar( the jar file which you have create)
application api: adapteclass
click save
8) In the Application method parameters,select the first input: String
Cange Map to:Adapter variables
Set the name to:var1 and click save
9) select the output:STring
change map to:Adapter variables
set name to: return variable
10) click save and save the adapter and click on Build
Adapter is now build the next step isto join it to the form
** join the adapter to the form**
Steps:
1) click on form designer and search the related form which we have created
2) In the respective form click on create a new version and create a new version
3) and then click on Pre populate tab and click on ADD
4)select adapter field to firstname
Rule : default
Adapter : Firstname
and click on save
5) In the adapter variable field click on firstname and fill the following
map to: Process data
Qualifier : firstname
6) Repeat steps 3 to 5 to map the email adapter
7) click on save.
Now we have done with all the steps and now we have created one User submit the user
we have click on request acounts ---> search the catalog and select the application instance (select the app instance "database provisioning") ---> add to cart ---> and check out ---> fill the form leaving email field --> ready to submit ---> submit
now we have check this user in database but still pre populated fields are not reflected. since this not working so we have found the other three links
Re: OIM 11gR2 - Prepopulate Field Empty Problem
http://fusionsecurity.blogspot.in/2013/01/populating-request-attributes-in-oim.html
http://identityandaccessmanager.blogspot.in/2011/07/prepopulate-adapter-in-oim-11g.html
according to these links they mention to implements the prepopulationadapter interface into the java class and create the plugin.xml for the class which we have used in jar.
so we prepared a plugin.xml
<?xml version="1.0" encoding="UTF-8" ?>
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint="oracle.iam.request.plugins.PrePopulationAdapter">
<plugin pluginclass= "com.oracle.demo.iam.prepop.plugin.UserLoginPrePop" version="1.0" name="UserLoginPrePop">
<metadata name="PrePopulationAdapater">
<value> My_users::email</value>
</metadata>
</plugin>
</plugins>
</oimplugins>
and the java class which implements "PrePopulationAdapter".
they mention to put that jar into one directory named "lib"and paste the xml and lib folder into the OIM_HOME\server\plugin
BUt we stuck on how to configure the adapter or what is the next steps for the above process. or there is something that we have missed in the process
please do reply its urgent
Regards,
Tushar Palekar

hii i have followed all your steps regarding the pre populated adapter ,but no luck.
java code :
package com.oracle.demo.iam.prepop.plugin;
import java.io.Serializable;
import oracle.iam.request.plugins.PrePopulationAdapter;
import oracle.iam.request.vo.RequestData;
public class Userfname implements PrePopulationAdapter {
public Serializable prepopulate(RequestData requestData){
String fname = "xyz";
System.out.println("Returning fname ==== " + fname );
return fname ;
2)i have create a jar for this code and paste it into lib folder.
3) i have create a plugin.xml
<?xml version="1.0" encoding="UTF-8" ?>
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<*plugins pluginpoint="oracle.iam.request.plugins.PrePopulationAdapter">*
*<plugin pluginclass= "com.oracle.demo.iam.prepop.plugin.Userfname" version="1.0" name="Userfname">*
*<metadata name="PrePopulationAdapater">*
*<value>register::LAST_NAME</value>*
*</metadata>*
*</plugin>*
*</plugins>*
*</oimplugins>*
4)i register the plugin using ant -f pluginregistration.xml register
5)i have restartthe oim server and then i create a user using the same app instatnce in which i have create the form(ie.register),and
request acount-->select app instance ---> add to cart
but the last name xyz as per the java code is not reflected in the dadbase table.
please help
tushar palekar

Steps to develope user name generation event handler in OIM 11gR2

Friends,
Can you please provide me steps to develop user name generation event handler in oim 11gR2?
Thanks,
Chakri

Thanks for providing the detailed steps. This is waht i was looking for.
I will follow these steps and let you know the results.
Thanks for your support.

Replicating the app functionality from OIM 10g to OIM 11gR2

Hi,
I have a resource object with an object form and a process form and approval, provisioning configured in OIM 10g design console. Provisioning is manual provisioning assigned to a particular group based on a task assignment adapter. For replicating the same in OIM 11gR2 i followed the following steps.
1. Created a Resource object in Design console.
2. Created a dummy IT Resource ( Since while creating app instance it is having IT Resource as Mandatory field. * Is there any way to skip this as i do not have any IT resource in my original app as it is going for manual provisioning?)*
3. Created a process form in Design Console with the same fields as present in my 10g app process form.
4. Now i need to Create an app instance and select the created resource object and IT resoource. Also i need to create a form associated with the app instance in which i will add the fields as present in the object form in my 10g app. ( Here i am not understanding how data will flow from object form to process form since there is no data flow mapping here)
5. Other steps like creating the SOA composite with human tasks and deploying it and after that creating approval policies is pretty much clear.
Please clarify whether the steps are correct and also the queries which i have posted in between. Thanks in advance.
Regards,
Durgaprasad
Edited by: Durgaprasad on Jan 17, 2013 3:38 AM

Thanks Gyanprakash. Wll disconnected resource trigger our custom approval process if we select the resource name properly in scope in operational level approval policy. Have you tried a disconnected resource with your custom approval process. Because i read the following lines in admin guide
Oracle Identity Manager supports provisioning of disconnected resources by using the SOA worklist for manual provisioning of disconnected resources. After the role-based provisioning decision or SOA request approval is complete and the corresponding application instance is determined to be a disconnected application instance, a new SOA workflow is started. This new SOA workflow is assigned to the manual provisioning administrator.
So i thought disconnected app instance will have its own approval process configured during the creation and it will route accordingly. So just wanted to clarify how to make disconnected app instance to trigger our approval. will approval policay take care of it as i am going to select the name of the disconnected app in the scope field.

Need information on OAM 11gR2 protecting OIM 11gR2

Hi All,
I need to implement a solution wherein I have to protect OIM 11gR2 application using OAM 11g2.
So in this case the identity store for OIM is the normal Oracle database and we have used the generic LDAP connector to provision the users to a LDAP directory which is the identity store for OAM.
I have gone through the OIM integration with OAM and it talks about a lot of steps involving extension of the identity store for both OIM and OAM,(Integrating Access Manager and Oracle Identity Manager - 11g Release 2 (11.1.2))
In my case I don't need the features like centralized password management functionality...we only want to protect the OIM application.
So is it possible to enable SSO without
1)Externalizing the identity store of OIM to the LDAP directory which is the identity store for OAM,and hence not running the LDAP sync utility
Also can you please guide me to a document that specifies the steps.
Thanks

Hi Thiago,
Thanks for your replies.
Yes, I followed certification matrix and tried to install 11.1.1.6 only on wlserver 10.3.6.
Can you please eloborate on the below points? Or If there are any urls for detailed steps, please provide them.
-What you have to do:
+2.1-On Application Server Navigator you can create types of connection:+
+2.2-Integrated WLS option+
+2.3-Standalone WLS option+
+2.4-This first option you can install a local standalone WLS 10.3.6 server on your environment, then create a separate "integrated WLS" connection to the standalone server.+
+2.5-Then go to your Application's properties through the Application menu -> Application Properties -> Run -> Bind to Integration Application Server option you can the brand new option created WLS server connection to work with your application.+
+3.0- Don't forget that you need to install the ADF Runtimes for the server to be able to work with ADF applications+

Dynamic lookup window

I understand in R16 there is a Dynamic Lookup window, i.e we can customize the lookup window. can anyone shed some light about this feature.

I think i got my answer, I can customize it in the Search Lookup window in each object

Dynamic lookup of all DB drivers loaded in the system

Hi everyone
Actually I want to know that whether it is possible to include in my program, the functionality that allows the dynamic lookup of all the DB drivers in the system.
I want to list the names of the Database drivers that have been loaded in the system.
waiting 4 ur reply:)

I am mailing u the code which I have written, it compiles without any error but does not give the desired output. it does not display even the name of the single driver although I have three loaded drivers in my system.
By system I mean that in my PC I have previously loaded three drivers by going to the Administrative tools\ODBC Data Sources. I want my program to pick the names of those drivers that have been loaded some time back.
So,instead of loading those drivers again in my program, I want the program to pick the names of those loaded drivers.
the code is shown below:
try
     Enumeration enumm=DriverManager.getDrivers();
     while(enumm.hasMoreElements())
     System.out.println(enumm.nextElement().toString());
catch(Exception e)
     System.out.println("Error");
}

Dynamic Lookups in OIM 11gR2

Similar Messages

Maybe you are looking for