Dynamic message trouble

I'm new to ActionScript and I'm trying to build a simple
adventure game engine. I'm basically trying to use a dynamic text
box to display different messages when the player investigates
something using the spacebar. For instance, I'd like to make so
that if if the character is touching a door and presses the space
bar, a message pops up in the dyn text saying the door is locked. I
need the messge to disappear from the screen whenever the character
moves any direction, only to reappear if character is touching the
door and presses spacebar again. Does anyone know how to go about
doing this? This is all of the code I have at the moment on the
door. Any help would be much appreciated!

If you are only checking once when the user presses teh space
bar then a listener will do the job for you.

Similar Messages

  • How to pass dynamic messages in a program

    Hello Experts,
        Would any one say..In a module pool program..I supose to pass dynamic messages..How can i do..
    Thanks in advance..
    Prashanthi

    Is this what you are looking for ? Re: Call MESSAGE dynamically

  • My Notes will not display and I get the message "Trouble communicating with icloud".  The notes are available directly at icloud

    When I try to open "Notes" I get the message "Trouble communicating with icloud"  The Notes are avaiable direc tly on icloud. just not on my laptop.

    gkmorton wrote:
    My IPad is loked with a message "ICloud Backup-  This Ipad has not been updated in 2 weeks.
    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    gkmorton wrote:
    I have connectd to my computer and it says there is a new software version available.
    Before Updating... Decide if you want to... If you Update... there is No going Back...
    NOTE:
    It is both Prudent and Recommended to Backup Before any Major Update or Upgrade.
    How to BackUp
    http://support.apple.com/kb/ht1766
    What gets Backed Up
    iTunes http://support.apple.com/kb/ht4946
    iCloud http://support.apple.com/kb/PH2584

  • Dynamic Message Choice

    I'm sure there was a discussion about this before(I could not find the exact thread) but let me describe my requirements .
    I have two messageChoice UI elements that is both populated by view objects. One is independently queried the other is dependent on the value of the first message choice.
    I want to accomplish two things
    1. When I select an item on the first messagechoice element the second messagechoice element should be refreshed. (AJAX like action)
    Anybody kind enough to point me to the right direction? Was it something discussed before? Thanks.

    u609740 ,
    See this article on my blog :
    http://mukx.blogspot.com/2007/09/dependent-dynamic-message-choicelists.html
    --Mukul                                                                                                                                                                                                                                                                                                                                   

  • Dynamic Message Box

    I am trying to create a dynamic message box that will update as things are being deleted from a list. I am going to presume that JOptionPane won't allow for such a thing as fancy as this and I have really no other idea as to how to do this.. All I need to do is countdown the items as they are deleted in a message box. Any suggestions?
    takizzle

    I am trying to work it with JFrame right now but I am having a problem getting something to pop up in the frame.. here is my code:
    JFrame statusFrame = new JFrame("Deleting Items");
    JComponent comp = new JTextArea("Deleting items x of y!");
    comp.setVisible(true);
    comp.show();
    statusFrame.getContentPane().add(comp, BorderLayout.CENTER);
    statusFrame.setSize(200, 150);
    statusFrame.setLocation(500, 500);
    statusFrame.getContentPane().add(comp);
    statusFrame.setVisible(true);
    statusFrame.show();
    The Text area is not coming up. Any ideas?/
    Takizzle

  • Dynamic Config Troubles in 2:1 Message Mapping

    I am using PI 7.1, and I have a 2:1 mapping that takes two input messages and combines them.  The mapping itself is very simple: it takes message A, adds two values from message B and creates message C.
    This mapping is in a transformation step in a BPM.  Message A has several values stored in its dynamic configuration, but after the transformation step, the dynamic configuration values are no longer available (message C has no DynamicConfiguration object in the SOAP Header).
    I tried adding a UDF to the mapping that attempts to read and print one of the dc values contained in message A, but I get a null value.  It's as if the dc values that came in with message A are destroyed once the 2:1 mapping begins.  How can I pass on these original dc values?
    I would appreciate any help you could offer!
    Thanks,
    David

    Hi Abhishek,
    Thanks for the response.  I don't understand when you say that DC does not work in a BPM.  I tried removing the second input message (just making it a 1:1 mapping inside the BPM as a test), and the DC values were read and passed successfully.  I also have a mapping in the exception branch in the BPM that reads a value in from DC without problems.  It would appear that the problem is the fact that the problem mapping is 2:1 rather than that it's in a BPM, right?
    Thanks!
    David

  • Dynamic message with Alert popup window?

    I'm using the simplest form of Alert popup window. Is there a way I can put a dynamic alert message in the window? For example,
    the Alert shows the "XYZ" at beginning, and then change to "ABC" by an event before the OK button is clicked.

    First you need to create a refernce to the Alert window.
    alert  = Alert.show("Hello");
    To change the text
    alert.mx_internal::alertForm.mx_internal::textField.text = "New Text";
    ( had to use mx_internals because the following code is not updating the text alert.text = "New text"; )

  • Seeburger AS2: dynamic message subject

    Hi guys,
    I'm using and developing an AS2 scenario with the Seeburger Adapter.
    I've read Deepthi Thread relating having the AS2 subject build dynamically but there is no suggestion, and the manual is not clear about this.
    In the situation of getting one message sent by an external partner, we need to have the message subject placed as * and then replace the * by a field sent on the message or even by a static text.
    Have you guys faced this kind of problem?

    Hi,
    > Can anyone please me how to identify different messagetype (like order response,ASN and invoice) without using message subject in AS2 sender adapter
    When message comes to PI, initially it goes to seeburger workbench, here based on the EDI type (ANSI X12 or EDIFACT or...), EDI Version (4010 or 4020 or...) and Signal (850 or 810 or ....) it determines the respective mapping (E2X or X2E) program, this is done by Classifier.
    When we are sending outbound scenarios and using MDN option then message subject plays an important role. Once we send the outbound signal we can get the ack(997) signal, based on AS2ID and message subject it identifies the respective 997 inbouns scenario.
    > I cant use splitter because my sender is sending XCBL data and splitter we can use when we go for EDI.
    Seeburger is used if you are handling the EDI data but here you are using XCBL so you no need to use the seeburger adapters.
    Regards,
    Venkata Ramesh

  • How to display Dynamic Message in Message Pool.

    HI All,
    I want to display the Error Message in Message Pool Dynamically.
    By creating only one Message in Message Pool of Type Error.
    I.E If user leaves the First Name and Last Name Field Blank then
    Error Message Should appear as:
    Please Enter First Name.
    Please Enter Last Name.
    How could i achieve this.....
    Regards,
    Dhruv Shah

    Hi Dhruv,
    In the Message Pool create a new Message of Type error and the Text Please enter the .
    And on the action of Your Submit button write the following code :-
    String strFirstName = wdContext.currentContextElement().getFirstName();
    IWDMessageManager msgMgr = WdComponentAPI().getMessageManager();
    IWDAttributeInfo <ObjectName> = this.wdContext.getNodeInfo.getAttribute("FirstNameField");
    if( strFirstName  == null || strFirstName.length() == 0)
    msgMgr.reportContextAttributeMessage(wdContext.currentContextElement,<ObjectName>,IMessage<componentName>.<MessageKey>,new Object[] {"First Name"},true);

  • Dynamic Message Routing - XI Adapter

    Hi All,
    I'm using Java Proxy as message receiver. During the configuration of communication channel which is an XI Adapter, the target URL is not mandatory. I'm wondering whether it is possible that the targe URL is not specified at configuration time, but determined according to a field of incoming messages during runtime. Could somebody help me?
    Regards
    Jerome

    Hi Siva,
    Thank you very much for the reply. Our scenario is more dynamic than you mentioned. In your scenario, all possible message receivers are know during the configuration time. So we can create a communication channel for each of them.
    In our scenario, we cannot know the possible messsage receivers' URL until runtime. So we'd like to create a communication channel for all possible receivers. In this communication channel, the "Target URL", "Service Number" and "Path" fields are left empty.
    URL of the real message receiver would be embedded in the incoming messages. XI would route that message according to the content of this field.
    Do you think this method could work in XI? I have this idea because the "Target URL", "Service Number" and "Path" fields are not mandotory fields in the communication channel editor. So could we determine them during runtime?

  • How to use timestamp based dynamic message selector?

    Is it possible with message selector to issue query like statement that
    weill fetch any messages that have header timestamp older than "now" + 3 hrs.
    In SQL you would say something like:
    where timestamp <= sysdate + (180/1440)
    Please let ne know.
    Thank you,
    Edmon

    hi edmon,
    to my knowledge dynamically evalutaed expressions like this are not supported by any of the JMS vendors. messageselectors are in SQL92 format and the only dynamic part in them is the contents of the message properties and headers.
    So, you're out of luck with what you want to do (e.g., remove expired messages from a destination when they havent' been consumed within a time threshold??) but i could see two possible solutions:
    1) You could use time-to-live (TTL) on the sender side. Messages that are on the destination beyond their TTL would be placed onto a dead message queue (DMQ) from where you could consume them for further processing. DMQ is not a standard-JMS feature but supported by a few vendorrs (e.g., JBoss, ArjunaMS).
    2) You could use Message-driven Services (MDS) for more elaborate server-side message processing. MDS has been pioneered by ArjunaMS but is also available with a few other JMS vendors.
    Hope that helps!
    Kind regards,
    Thomas.

  • JMSReplyTo property for MQ-message (trouble)

    Hello all!
    I'm trying to send JMS message to MQ-queue and I need to set field JMSReplyToQ in JMS section.
    I'm using:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    JMS_QUEUE_CONNECTION,
    Queue_payload_type => 'SYS.AQ$_JMS_TEXT_MESSAGE'
    FQ domain -> dbms_mgwadm.DOMAIN_QUEUE
    But I can’t set JMSReplyTo property for MQ-message. Please could you like help me for this trouble?
    See below my PL/SQL block:
    declare
    i_msg_id raw(24);
    l_id varchar2(25);
    l_msg_id raw(24);
    l_answer_queuename varchar2(80);
    l_answer_msg clob;
    l_answer_xml XMLType;
    procedure Put_MsgX (i_QueueName varchar2,
    i_msg CLOB,
    i_msg_id raw,
    i_characterSet number := 1208)
    is
    l_EnqueueOptions DBMS_AQ.ENQUEUE_OPTIONS_T;
    l_MsgProperties DBMS_AQ.MESSAGE_PROPERTIES_T;
    l_MsgID raw(16);
    l_msg_str CLOB:=i_msg;
    l_msg_str_len int;
    l_replyto sys.aq$_agent;
    l_header sys.aq$_jms_header;
    l_properties sys.aq$_jms_userproparray;
    l_mess_jms_text sys.aq$_jms_text_message;
    begin
    l_EnqueueOptions.visibility := DBMS_AQ.IMMEDIATE;
    -- Message object creating
    l_msg_str_len:=LENGTH(l_msg_str);
    l_mess_jms_text:=sys.aq$_jms_text_message(l_header
    ,l_msg_str_len
    ,l_msg_str
    ,null);
    -- MQRFH2 jms-folder properties
    l_mess_jms_text.set_groupid('grp_1');
    l_mess_jms_text.set_groupseq(5);
    -- Message corellation ID
    l_MsgProperties.correlation:='555D5120514D5F333C45584D4C2021115178D7BF20046922';
    -- Message priority
    l_MsgProperties.priority:=0;
    -- MQRFH2 usr-folder properties
    l_mess_jms_text.set_string_property('SOAPJMS_requestURI','jms:jndi:');
    l_mess_jms_text.set_string_property('SOAPJMS_contentType','text/xml; charset=utf-8');
    l_mess_jms_text.set_string_property('SOAPJMS_bindingVersion','1.0');
    /* -------- It is NOT WORKED !!! ----------------------------
    -- This code line isn’t effected to result (MQ Series message property ReplytoQ is empty)
    l_mess_jms_text.set_string_property('JMS_IBM_MQMD_ReplyToQ','queue:///PPV.JMS.MQ.OUT');
    -- This code line effected error
    -- oracle.jms.AQjmsException: JMS-147: Invalid ReplyTo destination type, or use of reserved `JMSReplyTo agent name,
    -- or serialization error with AQjmsDestination
    l_replyto:=sys.aq$_agent(null,'FXGTST.JMS_OUT',null);
    l_mess_jms_text.set_replyto(l_replyto);
    -- Sending message to MQ Series queue
    dbms_aq.enqueue(queue_name => i_QueueName,
    enqueue_options => l_EnqueueOptions,
    message_properties => l_MsgProperties,
    payload => l_mess_jms_text,
    msgid => l_MsgID);
    exception
    when others then
    Raise;
    end;
    begin
    i_msg_id:=UTL_RAW.SUBSTR(UTL_RAW.CAST_TO_RAW(SUBSTR(LPAD('999888777',24,'0'),1,24)),1,24);
    l_msg_id:=i_msg_id;
    l_answer_msg:=
    '<?xml version="1.0" encoding="UTF-8"?>'||
    '<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">'||
    '<SOAP-ENV:Header>'||
    '<m:UCBRUHeaders xmlns:m="urn:ucbru:gbo:v3"></m:UCBRUHeaders>'||
    '</SOAP-ENV:Header>'||
    '<SOAP-ENV:Body>'||
    -- some XML elements
    '</SOAP-ENV:Body>'||
    '</SOAP-ENV:Envelope>';
    l_answer_xml:=xmltype(l_answer_msg);
    l_answer_queuename :='FXGTST.JMS_IN';
    Put_MsgX(l_answer_queuename,l_answer_msg,l_msg_id);
    commit;
    exception
    when others then
    raise_application_error(-20020, 'Error: '||sqlerrm||' Queue='||l_answer_queuename);
    end;

    From JMS the correct way to set the mq message format to MQSTR is by using a JMS text message. You don't have to set anything explicitly.
    Can you try posting the message to a local mq and use some tool to see the message sitting on the format and check for the MQ format field. Also let know what exact error the other system is getting.
    P.S: For anything MQ, I would recommend to use this forum : www.mqseries.net.

  • Dynamic Message Calls

    Hi,
       I am facing a problem with Messages. If someone is maintaining for particular personnel No Details Let see Address in SAP R/3 and in the same time if the person is trying to change in ESS in Enterprise Portal, Then he is getting the message like
    "HR Dept. maintaining the data. Please try again later".
    Now the customer wants to change this Message to some meaningful one like "this record is locked by this user".
    Actually the message class is PWWW and it is called by SAP as Dynamically.
    If anyone have the Idea, how to solve the problem, then It will be a great help for me.
      For this they are using the Tcode "PZ02" to display the address of ESS in Enterprise portal.
    Thanks in Advance.
    Regards,
    Rajesh.S

    it is a customer message class, not SAP standard message class.
    Group number
    Sales document number                  0008503002
    Item number of the SD document         000000
    Schedule line number                   0018
    Counter in control tables              00
    Message identification                 Z1
    System message number                  018
    Output type                            E
    Message variable 01                    0000027985
    Message variable 02                    027985
    Message variable 03
    Message variable 04
    Group type                             F
    Old-customer number for customer 0000027985 is not correct (027985)
    thanks a lot!
    kitty

  • Dynamic Message Selector

    I am faced by a requirement where I need to be dynamically keep changing the message selector's defined on the MDB's, without redeploying them.
    Is this possible to do ? and if yes can someone point me in the right direction or give me some examples on how to do this ?
    Thanks,
    AA

    Hi Ankit,
    Did you make out how to implement message Selector. I have the requirement and i stuck up . If you suceeded, i need help.
    How you achived this.

  • ALV report(Dynamic Messages)

    Hi all,
    i want to display my output in ALV's,
    but there are some messages needs to be displayed on the screen dynamically depends upon the output result.
    eg : in Out put if there are 2 diff  Amount  values.if  the difference is not EQ  .
    i want to display 'not matched'.
    please let me know .
    Thanx in adavance,
    Regards,
    Raj.

    hi,
    d_fieldcat_wa-fieldname = 'AMOUNT1'.
    d_fieldcat_wa-seltext_l = 'amount1'.
    d_fieldcat_wa-col_pos = 1.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'AMOUNT2'.
    d_fieldcat_wa-seltext_l = 'amount2'.
    d_fieldcat_wa-col_pos = 2.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    data : gd_repid like sy-repid.
           gd_repid = sy-repid.
    if AMOUNT1 NE AMOUNT2.
    write :/ 'NOT MATCHED'.
    else
    call function module reuse_alv_grid_display.
    exporting.
    program name = gd_repid.
    t_fieldcatalog = d_fieldcat.
    importing.
    t_outtab = itab.
    exceptions.
    endif.
    Reward with points if helpful.

Maybe you are looking for

  • Disk utility recomends backing up files after hard drive can not be repaired?

    My Mac mini will not complete the boot process. I am able to get to the disk utility by using the Snow Lepard disk that I recently purchased and pressing the option key. Disk utility is telling be that my disk can not be repaired and I should back up

  • Every item I bring into InDesign is text wrapped automatically

    Every photo I place, every text box I start, is already text wrapped.  Somehow InD CS4 is automatically adding text wrap to every object.  How do I shut this automated feature off?  Many thanks in advance!

  • PowerShell script : Directory object not found error in Get-ADGroupMember

    I am new in powershell scripting. I am writing a script to add users in different AD Groups. while doing so I do the following: Check if the user already exist in the group: $mbr_exist = Get-ADGroupMember $grpname | Where-Object {$_.SamAccountName -e

  • Tv - iMac Which connector to use

    I bought a new LED TV Hd etc etc the other day and i was going to hook it up to my Mac with a mini dvi to VGA then use a VGA cable to connect it, but while apple deliver it I've been checking out the other slots the TV has and one say's "PC DVI" next

  • Data Medium Exchange Error

    Hi I am working on international Payroll, Some of the employees are paid thru cheque, cheque payment type  is updated in bank details(IT0009). when i am running the DME program ,its showing that employee has to be paid thru cheque. But its throwing a