Dynamic months names

Hi all,
i have the Final Output Table with the fields Workstart Date and WorkEnd date.
lets us say the work start date is 01-01-2009 and
                              workend date is 31-12-2009.
so, in my final output table i want to generate 12 dynamic columns, each column referring to each month.
like 01-01-2009 is the first column
     01-02-2009 is the second column
     01--3-2009 is the third column etc.
the work start date and workend date is are also varying depending upon requirement.
if work start date is 01-01-2009 and
    workend date is 31-12-2010. then in this case i have to generate 24 dynamic columns.
How to do this.
Thanks
Kamala

Try something like following
DATA : GO_LINE_TYPE      TYPE REF TO CL_ABAP_STRUCTDESCR, "LINE STRUCTURE
        GO_TABLE_DESC     TYPE REF TO CL_ABAP_TABLEDESCR,   "TABLE DEFINITION
        GS_COMPONENTS     TYPE        ABAP_COMPONENTDESCR, "FIELDS STRUCTURE
        GT_COMPONENTS     TYPE        ABAP_COMPONENT_TAB,   "FIELDS TABLE
        GR_TAB            TYPE REF TO DATA,                 "DATA TABLE
        GV_DATE          TYPE        D.                     "DATE
FIELD-SYMBOLS: <GT_TABLE> TYPE        TABLE.                "FINAL TABLE
GV_DATE = '20090101'.   "SET FIRST OF THE YEAR
DO 24 TIMES.            "CREATE 24 COLUMNS
CLEAR GS_COMPONENTS.   "CLEAR FIELDS STRUCTURE
CONCATENATE 'D' GV_DATE INTO GS_COMPONENTS-NAME. "CREATE FIELD NAME D + DATE
GS_COMPONENTS-TYPE ?= CL_ABAP_STRUCTDESCR=>DESCRIBE_BY_NAME( 'BUDAT' ). "GET FIELD TYPE
APPEND GS_COMPONENTS TO GT_COMPONENTS.                                  "ADD FIELD TO LINE STRUCTURE
GV_DATE+4(2) = GV_DATE+4(2) + 1.                                        "GET NEXT MONTH
IF GV_DATE+4(2) > 12.                                                   "CHECK FOR NEW YEAR
    GV_DATE+0(4) = GV_DATE+0(4) + 1.                                     "INCREASE YEAR
    GV_DATE+4(2) = '01'.                                                 "SET FIRST MONTH
ENDIF.
ENDDO.
GO_LINE_TYPE = CL_ABAP_STRUCTDESCR=>CREATE( GT_COMPONENTS ).            "CREATE LINE STRUCTURE
GO_TABLE_DESC = CL_ABAP_TABLEDESCR=>CREATE( GO_LINE_TYPE ).              "CREATE TABLE DESCRIPTION
CREATE DATA: GR_TAB TYPE HANDLE GO_TABLE_DESC.                          "CREATE DATA REF TABLE
ASSIGN: GR_TAB->* TO <GT_TABLE>.                                        "ASSIGN TABLE

Similar Messages

Saving result from sp_executesql into a variable and using dynamic column name - getting error "Error converting data type varchar to numeric"

Im getting an error when running a procedure that includes this code.
I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql
DECLARE @retval AS DECIMAL(12,2)
DECLARE @MonthVal VARCHAR(20), @SpreadKeyVal INT
DECLARE @sqlcmd AS NVARCHAR(150)
DECLARE @paramdef NVARCHAR(150)
SET @MonthVal = 'Month' + CAST(@MonthNumber AS VARCHAR(2) );
SET @SpreadKeyVal = @SpreadKey; --CAST(@SpreadKey AS VARCHAR(10) );
SET @sqlcmd = N' SELECT @retvalout = @MonthVal FROM dbo.CourseSpread WHERE CourseSpreadId = @SpreadKeyVal';
SET @paramdef = N'@MonthVal VARCHAR(20), @SpreadKeyVal INT, @retvalout DECIMAL(12,2) OUTPUT'
--default
SET @retval = 0.0;
EXECUTE sys.sp_executesql @sqlcmd,@paramdef, @MonthVal = 'Month4',@SpreadKeyVal = 1, @retvalout = @retval OUTPUT;
SELECT @retval
DECLARE @return_value DECIMAL(12,2)
EXEC @return_value = [dbo].[GetSpreadValueByMonthNumber]
@SpreadKey = 1,
@MonthNumber = 4
SELECT 'Return Value' = @return_value
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
>> I need to select from a dynamic column name and save the result in a variable, but seem to be having trouble with the values being fed to sp_executesql <<
This is so very, very wrong! A column is an attribute of an entity. The idea that you are so screwed up that you have no idea if you want
the shoe size, the phone number or something else at run time of this entity.
In Software Engineering we have a principle called cohesion that says a model should do one and only one task, have one and only one entry point, and one and only one exit point.
Hey, on a scale from 1 to 10, what color is your favorite letter of the alphabet? Yes, your mindset is that level of sillyity and absurdity.
Do you know that SQL is a declarative language? This family of languages does not use local variables!
Now think about “month_val” and what it means. A month is a temporal unit of measurement, so this is as silly as saying “liter_val” in your code. Why did you use “sp_” on a procedure? It has special meaning in T-SQL.
Think about how silly this is:
SET @month_val = 'Month' + CAST(@month_nbr AS VARCHAR(2));
We do not do display formatting in a query. This is a violation of at the tiered architecture principle. We have a presentation layer. But more than that, the INTERVAL temporal data type is a {year-month} and never just a month. This is fundamental.
We need to see the DDL so we can re-write this mess. Want to fix it or not?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Passing Dynamic File Name to ODI nterface for processing to another system

Hi,
I need help regarding passing a Dynamically Name changing fixed length Flat File in ODI Interface. This interface is built for taking the Flat File as Input and process it to SQL Server by applying Data Mapping and transformations... The input Flat File Name is sequence generated for eg: OEORD1123.txt and next file will be OEORD1124.txt and it sits in Oracle Conc tier. How to pass the latest file name to ODI interface for processing
Regards,
Anil..

Hi Guys...
I would like to suggest a way.
a) create a single interface with dynamic resouce name (a ODI variable) with a filter to the month column like:
month_column = '#vCountMonth'
b) in the refresh tab of a first variable (I named "vMonth"), use the following query: (varialbe should be alphanumeric, "not persistent")
select to_char(to_date('#vCountMonth','MM'),'month') from dual
c) create one more ODI variable (I named "vCountMonth"), alphanumeric, not persistent and at its refresh tab write:
select lpad(to_char(#vCountMonth + 1), 2, '0') from dual
d) now just create a package, drag and drop the objects in the following order:
d.1) vCountMonth in set mode and set = 0 (zero)
d.2) vCountMonth in refresh mode
d.3) vMonth in refresh mode
d.4) the interface
d.5) vCountMonth in evaluate mode, evaluating "= 12"
==> if NO (KO, red line) link the KO line to d.2 step
==> a OK line is not necessary unless you have others steps after finish the evaluating
Make any sense? That is a single loop to have the interface developed only one time.
Please, remember to check each thread reply as Useful or Correct if they are useful to you...

Dynamically Pass the Column Name cursor. || Dynamic Column Name

Hi,
I need to dynamically pass the column name based on a Mapping table in a loop ( Right now i have hardcoded stuff )just like using Execute immediate.... Inside the procedure, I have commented as where i hit the problem.
Thanks for all of your time...
Thanks
Muthu
CREATE OR REPLACE PROCEDURE xml_testing_clob AS
doc xmldom.DOMDocument;
main_node xmldom.DOMNode;
root_node xmldom.DOMNode;
user_node xmldom.DOMNode; item_node xmldom.DOMNode;
root_elmt xmldom.DOMElement;
item_elmt xmldom.DOMElement;
item_text xmldom.DOMText;
item_test xmldom.DOMText;
nodelist xmldom.DOMNodeList;
sub_variable varchar2(4000);
x varchar2(200);
y varchar2(200);
sub_var varchar2(4000);
CURSOR get_users IS
SELECT FIRST_NAME,LAST_NAME,ROWNUM FROM USER_INFO_TBL WHERE WEIN_NUMBER = '1234' ;
CURSOR get_cdisc_name IS
select CTS_COL_NAME,CDISC_NAME from CTS2CDISC_DICTIONARY where CTS_TABLE_NAME = 'USER_INFO_TBL';
BEGIN
-- get document
doc := xmldom.newDOMDocument;
doc := xmldom.NewDomDocument;
xmldom.setVersion(doc, '1.0');
xmldom.setStandalone(doc, 'no');
xmldom.setCharSet(doc, 'ISO-8859-1');
-- create root element main_node := xmldom.makeNode(doc);
root_elmt := xmldom.createElement(doc,'AdminData');
root_node := xmldom.appendChild(main_node,xmldom.makeNode(root_elmt));
FOR get_users_rec IN get_users LOOP
item_elmt := xmldom.createElement(doc,'User');
xmldom.setAttribute(item_elmt,'OID' , get_users_rec.rownum);
user_node := xmldom.appendChild(root_node,xmldom.makeNode(item_elmt));
FOR cv_get_cdisc_name IN get_cdisc_name LOOP
EXIT WHEN get_cdisc_name%NOTFOUND;
sub_var := cv_get_cdisc_name.cts_col_name;
sub_variable := 'get_users_rec.';
sub_variable := 'get_users_rec.'||cv_get_cdisc_name.cts_col_name;
x := sub_variable;
dbms_output.put_line(x); -------------- Here i just see the literal string
y := get_users_rec.FIRST_NAME;
dbms_output.put_line(y); -------------- Here i just see actual value ( data )
item_elmt := xmldom.createElement(doc,cv_get_cdisc_name.cdisc_name);
item_node := xmldom.appendChild(user_node,xmldom.makeNode(item_elmt));
item_text := xmldom.createTextNode(doc,x ); ---- This is the place i am hitting with an error .
If i use variable X then i am able to see only the literal
string in the output. BUT if i put cursor name.coulmname,
then the resumt (XML) is fine.I wanted acheive this
dynamically just like execute Immediate
item_node := xmldom.appendChild( item_node , xmldom.makeNode(item_text));
END LOOP;
END LOOP;
-- write document to file using default character set from database
xmldom.WRITETOCLOB(doc,);
xmldom.writeToFile(doc, 'c:\ash\testing_out.xml');
-- free resources
xmldom.freeDocument(doc);
END;
+++++++++++++++++++++++++++++++++++ XML OUTPUT +++++++++++++++++++++++++++++++++++++++++
<?xml version="1.0" ?>
- <AdminData>
- <User OID="1">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName> </User>
- <User OID="2">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="3">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="4">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
- <User OID="5">
<FirstName>get_users_rec.FIRST_NAME</FirstName>
<LastName>get_users_rec.LAST_NAME</LastName>
</User>
++++++++++++++++++++++++++++++++++++++++++++++++++++ MAPPING TABLE DETAILS +++++++++++++++++
CTS_COL_NAME     CDISC_NAME     CTS_TABLE_NAME     XML_TAG     -----------> Column Name
FIRST_NAME     FirstName     USER_INFO_TBL     Element     -----------> Records
LAST_NAME     LastName     USER_INFO_TBL     Element     -----------> Records

My scenario is little different, let me explain:
My columns will remain same but values changes (based on column formula) according to the selected prompt value
If I select 'Oct' from prompt then
Curr will contain data for 'Oct' only
Next1 will contain data for 'Nov' only
Next2 will contain data for 'Dec' only
Next3 will contain data for 'Jan' of next year only.
Later if I select 'Jul' from prompt then
Curr will contain data for 'Jul' only
Next1 will contain data for 'Aug' only
Next2 will contain data for 'Sep' only
Next3 will contain data for 'Oct' only.
I don't have different columns for each months but the columns are capable to reflect data for any month.
So, how can I reflect the column name as month name for which that contains data.
Regards,
S Anand

Oracle Reports 10g Distribution - Dynamic file name

HI all.
I have a problem in my distribution file.
The following is my xml file:
<destinations>

<file id="MyFiles1" name="C:\Apps_Attach\Jan2007\Rep_all_Employees.pdf" format="pdf" >
<include src="mainSection"/>
</file>

<foreach>
<file id="MyFiles2" name="&<FOLDER_NAME>&<post_month>&<REP_EMP_NO>.pdf" format="pdf" instance="this">
<include src="mainSection"/>
</file>
</foreach>
</destinations>
This is used for generating Pay Slips as pdf files and storing in the AS.
The users can login to the application with their ID/password and view their payslips only. All working ok.
I can successfully generate both - single file per Employee and one BIG pdf containing all pay slips - this is for the report generator's viewing only.
My problem is - I have to store every month's files in a different folder. Say for example, Jan -2007 files in a folder called Jan2007 , Feb 2007's files in Feb2007 folder,etc.
The parent path for these is fixed - C:\Apps_Attach\
I am able to do this in the per employee files -
&<FOLDER_NAME> gives C:\Apps_Attach\
&<post_month> gives the Jan2007\, Feb2007\,..etc. folder name from Report.
&<REP_EMP_NO> gives the file name per employee.
But in the generate one file for all employees, I am not able to use dynamic path name like
name="&<FOLDER_NAME>&<post_month>Rep_all_Employees.pdf"
It works fine if I use
name="C:\Apps_Attach\Jan2007\Rep_all_Employees.pdf" as in my xml file code above.
Thanks in advance.
-Anu.

Anybody knows how?
-Anu.

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

How to change recordset bahaviour to accept dynamic column names in the where clause

Hi
im using php-mysql and i make a recordset and i want to make the column names in the where clause to be dynamic like
"select id,name from mytable where $tablename-$myvar";
but when i do this my i break the recordset and it disappear
and when i use variables from advanced recordset it only dynamic for the value of the column not for the column name
and when i write the column name to dynamic as above by hand it truns a red exclamation mark on the server behaviour panel
so i think the only way is to change the recordset behaviour is it? if so How to make it accept dynamic column names?
thanks in advance.

As bregent has already explained to you, customizing the recordset code will result in Dreamweaver no longer recognizing the server behavior. This isn't a problem, but it does mean that you need to lay out your dynamic text with the Bindings panel before making any changes. Once you have changed the recordset code, the Bindings panel will no longer recognize the recordset fields.
Using a variable to choose a column name is quite simple, but you need to take some security measures to ensure that the value passed through the query string isn't attempting SQL injection. An effective way of doing this is to create an array of acceptable column names, and check that the value matches.
// create array of acceptable values
$valid = array('column_name1', 'column_name2', 'column_name3');
// if the query string contains an acceptable column name, use it
if (isset($_GET['colname']) && in_array($_GET['colname'], $valid)) {
$col = $GET['colname'];
} else {
// set a default value if the submitted one was invalid
$col = 'column_name1'
You can then use $col directly in the SQL query.

Month name displayed in month calendar view for previous month

In iPad IOS 7.04 iCal month view the month name displayed at the top of the window is incorrect. The previous month name show when viewing a calendar month. Test by selecting year view and the any month from the year. The month view will be for the selected month, but the month name will be for the preceding month. The incorrect month name in month vie is also displayed if the month view is scrolled to new months.
I observe this on my iPad II.
Ha s anyone seen this error? Does anyone know if Apple has seen this and has a plan to correct it?

Imhave the same exact problem on my iPad2. It was not fixed in the recent iOS 7.1 release, even though modifications were made to the calendar app. Very frustrating, since this is such an easily observable problem.

Checking for month name and number in different language?

I have to let people search for documents by date. The database is used by French-speakers as well as English-speakers. The search allows users to type in free text (because it's not just dates they might search by, though if they do type in something that's intended to be interpreted as a date, that's the only thing they're allowed to type in). So, I might get '23/Apr/2009' or '2009/04/23', for example. (I also have to allow them to submit 23.04.2009 and 23 04 2009 and any combination of the above!)
I have written a function which breaks the string into three bits, and then I work out if each bit is a year, or a month, or a day with simple rules (eg, if it's a number between 1900 and 2400, it must be the year component).
When it comes to the month, I do two things. One is obvious: is it a number between 1 and 12? The other is, is it a month name that appears in a list of 'allowed' month names. So my function does this at the start:
v_validmonths := 'january,february,march,april <and so on>';
v_validmonths := v_validmonths || ',janv,fevr,avr,mai, <and so on>';Then I do this:
    for x in 1 .. listlen(v_validmonths,',') loop
      v_probemonth := listgetat(v_validmonths,x,',');
      if instr(lower(v_partone),v_probemonth) > 0 then
        v_month := extract (month from to_date(v_partone,'MON'));
      end if;
    end loop;   IE, I compare the first component of the string (v_partone) with the list of allowed month names. I repeat that for the other two parts of the supplied string. As you can see, if one of the parts of the supplied string matches an allowed month name, I then try to extract the month number into a variable, using Oracle's own extract function.
And that's where my problem arises. Because although "aout" is valid French for August and is permitted by my list of valid months, the extract function fails to understand it. A simple select extract (month from to_date('AOUT','MON')) from dual, for example, gives an ORA01843 (invalid month).
How can I get the code to work with French (and German, actually) months and month abbreviations whilst also being able to understand English ones? Is there an in-built function that would allow me to do this? Or is there some way neatly to say, 'yes: AOUT is in the list, and it's month 8' without me having to rely on the extract function to work it out?
(I realise that the business requirement here is very peculiar and your first reaction will probably be "this is horrible!". I will absolutely agree with you! But this is the requirement as has been explicitly specified by the MD and I can't negotiate it away, sadly.)

Hi,
Many of Oracle's date functions allow a parameter where you can override the current NLS settings only for that function call.
For example:
SELECT TO_DATE ( 'JUIL.'
                 , 'MON'
                 , 'NLS_DATE_LANGUAGE=FRENCH'
                 ) AS month
FROM    DUAL;You could also create your own table of month names
NAME     NUM     LANGUAGE
JANVIER   1     FRENCH
JANV       1     FRENCHand look up the names in this table, rather than in a string hard-coded in the function. This might be especially useful if you wanted to allow your own abbreviations or spellings (e.g., ignoring accent marks).
Edited by: Frank Kulash on Dec 16, 2010 11:40 PM

How to create a formula to get the month name based on userresponse

Hi,
I have created a report using E-Fashion - Actually i need a report like - For ex i need 4 months data from 12 months
My report should display the 4 months data along with starting & end month data in the next 2 columns
I have used the prompt to fetch the data & i have created a formula in the cloumn like below:
For the column haader i have given = Tonumber(userresponse("Enter start:")) - I am getting the Month number in the header But i need the month name in the header.Please guide me
Regards
Karthika

Hi Ram,
Thanks for your Help.I tried in an another way like I created 2 Variable -
Start Date =UserResponse("Enter Month(Start):"
End Date = =UserResponse("Enter Month(End):"
I have created the column header for
start date:
=If([start Date] = "1";"January";If( [start Date] = "2"; "February";If([start Date] = "3";"March";If([start Date] = "4";"April";If([start Date] = "5";"May";If([start Date] = "6";"June";If([start Date] = "7";"July";If([start Date] = "8";"August";If([start Date] = "9";"September";If([start Date] = "10";"October";If([start Date] = "11";"November";If([start Date] = "12";"December"))))))))))))
End Date:
=If([End Date] = "1";"January";If( [End Date] = "2"; "February";If([End Date] = "3";"March";If([End Date] = "4";"April";If([End Date] = "5";"May";If([End Date] = "6";"June";If([End Date] = "7";"July";If([End Date] = "8";"August";If([End Date] = "9";"September";If([End Date] = "10";"October";If([End Date] = "11";"November";If([End Date] = "12";"December"))))))))))))
For the Datas in the column:
Start Date:
=[Sales revenue] Where([Month]=ToNumber(UserResponse("Enter Month(Start):")))
End Date:
=[Sales revenue] Where([Month]=ToNumber(UserResponse("Enter Month(End):")))
I got the Report format as i required
Thanks
Karthika

Display Month name Year

Hi,
Which variable Displays Month name Year (Exaple: July 2007)???
Help will be gratly appreciated...
Thanks...

Hi,
Thanks for your information..
But i am not getting like month and year display( Example: Sept 2007)
I am using Text variable 0P_FPER on 0Fiscal year/period..
and entering Input as 006.2007 then the resultant query displays as 06.
Please suggest me how to do it??
For entry i should give 006.2007 (or) Sept 2007..
But in the result it should display as Sept 2007..
Help will be greatly appreciated...
Thanks

How to set dynamic table name in sql query?

I want set dynamic table name by parameter in sql query,just like:
select * from :tbname
but run report is error,BI P report table name is invalidation.
What can i do? Thanks!

Hi,
that's only possible inside a data template with a lexical parameter.
Regards
Rainer

Problem with Dynamic Table Name

Hello all,
I am having trouble using a dynamic table name. I have the following code.....
declare l_cur sys_refcursor;
l_ID int;
l_tableName varchar(30);
BEGIN
open l_cur for
select hkc.ColumnID, mapping from &HKAPPDB_Schema_Name..doctablemapping ddm
inner join &HKDB_Schema_Name..HKColumns hkc on hkc.doctablemappingid = ddm.id
where ddm.id > 0;
LOOP
     FETCH l_cur into l_ID, l_tableName;
     EXIT WHEN l_cur%notfound;
     -- update missing VerbID in DocumentDocMapping table
     UPDATE &HKAPPDB_Schema_Name..IndexedDocument
     SET VerbID = (SELECT t.VerbID
                         FROM (SELECT DocRef, VerbID, DateUpdated
                              FROM &HKAPPDB_Schema_Name..l_tableName dd        - this is where the dynamic table name is used
                              WHERE dd.VerbID is not NULL))
     WHERE HKColumnID = l_ID AND VerbID is NULL;
END loop;
end;
/When I try to execute this i get an error
ORA-00942: table or view does not exist
What am I doing wrong?
Regards,
Toby

redeye wrote:
I only started about 6 weeks ago, with no tutorials and learning it on the fly; Same here.. only my introduction was to a 12 node Oracle OPS cluster all those years ago.. and required a whole new mind set after using SQL-Server extensively. But it was fun. Still is. :-)
but thats what you get when a company throws you in at the deep end with a ridiculous time constraint to migrate a whole MSSQL DB.Migrating SQL-Server to Oracle is not a simple thing. A lot of best practices in SQL-Server are absolutely worse practices in Oracle - they are that different. Simple example is lock escalation - an issue in SQL-Server. In Oracle, the concept of a lock being escalated into a page lock simply does not exist.
In terms of getting the migration done as quickly and painlessly as possible I try to reuse all the logic as it appears in the MSSQL code - in this case it was using dynamic table names. I do not doubt that i am probably shooting myself in the foot in the long run.....As long as you do not splatter too much blood on us here.. not a problem :D
Seriously though - just keep in mind that what works in SQL-Server may not work as well (or even at all) in Oracle. So do not hesitate to refactor (from design to code to SQL) mercilessly when you think it is warranted.

FM to get the month name based on numeric value

Hi , Is there any FM which returns the month name when we enter the corresponding numeric value . E.g. if the input is 3 the output must be March

Hi,
Try
DATA: mon_number TYPE numc VALUE '03',
month_name(20).
SELECT ltx
FROM t247
INTO month_name
WHERE spras = 'EN'
AND mnr = mon_number.
Hope it helps.
Regards
Message was edited by: Shehryar Khan

Dynamic file name ?

Hi,
I am following this blog to name the target file/directory dynamically at the runtime :
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
But I am getting this error in the CC monitoring :
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

Hi,
Try following this weblog for dynamic file name.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Dynamic filename come under the Dynamic configuration in moni, for your messages.
This is the code used inside.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Dynamic months names

Similar Messages

Maybe you are looking for