Month name displayed in month calendar view for previous month

In iPad IOS 7.04 iCal month view the month name displayed at the top of the window is incorrect. The previous month name show when viewing a calendar month. Test by selecting year view and the any month from the year. The month view will be for the selected month, but the month name will be for the preceding month. The incorrect month name in month vie is also displayed if the month view is scrolled to new months.
I observe this on my iPad II.
Ha s anyone seen this error? Does anyone know if Apple has seen this and has a plan to correct it?

Imhave the same exact problem on my iPad2.  It was not fixed in the recent iOS 7.1 release, even though modifications were made to the calendar app.  Very frustrating, since this is such an easily observable problem.

Similar Messages

  • SAP XI runtime workbench doesnot display data for previous months

    Hi,
    We are experiencing an issue in our XI system. When we try to extract messages from the Integration engine we recieve data only for two months including the present month and not for previous months.
    Can you pleaes suggest which SAP job or any set parameter is creating such a scenario.
    Thanks in advance and suggestion are welcome.
    Regards,
    Subhram

    You should check the archiving/deletion jobs in the PI Admin Check guide..
    Kind regards,
    Mark

  • SAP Trans.Code-To view the previous month's OSP Report

    Pl.mention the SAP trans.code for view the OSP status as on previous month.For an example,I want to see the status of OSP stocks as on 30.11.2010.How can I see?From MBLB,we can see the current OSP stock status.Is there any trans.Code for view the previous month OSP stock status?
    Regards

    hi,
        there is no t code specific to your requirement, but you can get the details through MB51, by metioning repective date and movement types like 541,543 etc..
         hope this will help..
    Regards
    Manohar

  • Check 3G data usage for previous months?

    Where do I go to check my 3G iPad2 data usage for previous months?
    I look in the Settings / Cellular Data / View Account - but only see the current month.
    I tried to create a My Verizon account on the verizon wireless web site using my iPad phone number but I get the error "We're sorry, but at this time you cannot register your account for My Verizon. Please access your account information on your device."
    I installed the "My Verizon" app for ipad from the App Store but I get "System under maintenance.  Please Try again." all the time.
    Is there someplace else I can see previous months data usage?  I would like to get a sense how much I have used in the past.
    Thanks
    Joe

    Dear AdamE+VZW and AntoniioC_VZW
    Have you actually tried the advice you gave?  I'm 6 days into my billing cycle.  The furthest back I am able to see data traffic is 6 days.
    The specific navigation path "View Bill --> I Want To...  --> Month ---> Usage Details --> Data"  does not currently exist.
    As far as I can tell, AdamE's claim that "You can easily see the past six months of data usage on our website " is untrue.
    The report generated by the "Account Analysis" is plainly false as well.  It reports that both of my data phones used exactly 1024.00 MB in February, March, and April. (sic: 2 decimal points!!).  That is an exceedingly unlikely coincidence, and flatly contradicts the current month summary which reports that one of my phones has used only 23 MB, and the other line even less.  The "Account Analysis" has a bug so serious as to render its data traffic output absolutely useless.  Since it is providing false output, it should be removed from the site until it can be fixed to generate accurate reports.
    I can't even find a way to see my prior month's summary bill, though I can't be sure it is unavailable since the site is large.  But I can say that when a customer spends 15 minutes clicking around a site trying to find their prior month's bill (not merely the bill's dollar amount, but the bill's usage summary) and fails, the site navigation should be improved!!

  • Need reporting logic for Previous months sales compared to current month

    Dear Folks,
    I need to design a report that  should give cumulative sales for the month compared with cumulative sales for the same date for previous months e.g. Sales upto 21st May should be compared with sales from 1st to 21st April, from 1st March to 21st March and so on.
    Can anyone provide me a logic or CMOD code how to develop this report.
    Will be great helpful.
    Thanks in Advance.
    Rakesh

    Hi Rakesh,
         To accomplish the required output, you need to create variables that are input enabled and of processing type user eixt in the columns of your report in the query designer. I am assuming that, you would have atleast one variable which is input enabled and of processing type manual entry.
    The user would input a date ( for example may 21) in this variable. You need to capture this value in the user eixt in I-STEP 2. From this value you need to calculate the previous month and pass it to the user exit variable. Below is a sample code,
    ----variable ZPREVDATE:pass the to value from variable ZCURRDAT -
    DATA : LV_CALDAY TYPE SY-DATUM,
               LS_T_VAR_RANGE TYPE i_t_var_range,
               LV_YR(4), LV_MN(2), LV_DY(2).
    WHEN 'ZPREVDATE'.
    IF i_step = 2.
          READ TABLE i_t_var_range INTO LS_T_VAR_RANGE
          WITH KEY vnam = ZCURRDAT'.
          LV_CALDAY = LS_T_VAR_RANGE-high.
          LV_YR = LV_CALDAY+0(4).
          LV_MN = LV_CALDAY+4(2).
          LV_DY = LV_CALDAY+6(2).
    LV_MN = LV_MN - 1.
    CONCATENATE LV_YR LV_MN LV_DY INTO LV_CALDAY.
          ls_range-low = LV_CALDAY.
          ls_range-opt = 'EQ'.
          ls_range-sign = 'I'.
          APPEND ls_range TO e_t_range.
    ENDIF.
    The above code is a rough code that would help you to acheive your logic
    Regards,
    Prem

  • Problem in measure for previous month

    i have columns like following
    d_name Value
    JAN-11 4586236
    FEB-11 2121512
    MAR-11 32121
    APR-11 12121
    p_name is varchar2 type
    Now i need value for previous month can u do it without using queries or obiee
    I am unable to build hierarchy cause of its type. any suggesions

    You might have month numbers in rpd, use ago function to get previous month value

  • HT201504 2015 Calendar font for the month in IPhote is too small.  How do I make it larger?

    I have created a 2015 calendar in IPhoto but the month is printed in a tiny font.  I can't make it larger. The 2014 calendar used a large font for the month.  How can I resolve this so can actually read the name of the month without my glasses?

    That was just a test.  It showed that your current library is damaged and needs repairing. Do the following to your current library:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.

  • Is Caller Display free or not free for 12 months?

    When BT announced there would be a charge of £1.75 pm for Caller Display, they also stated this service would be free for 12 months if the subscriber renewed their contract for one year. i rang BT and agreed to take up the offer.
    I have looked at the past 2 bills and they have the following line entries. Here's the latest bill, word for word:
    1. BT Privacy at Home - Caller Display   28 Apr - 27 May 14 
    This is the cost of your BT Privacy at Home - Caller Display up to 27 May 2014 at £1.75 a month    £1.75
    2. BT Privacy with Caller Display free for 12 months 28 Apr - 27 May 14   £0.00
    I queried the £1.75 charge shown on line 1. via BT online webchat and here's BT's response, again word for word:
    "BT Privacy With Caller Display is free but for BT Privacy at Home you will be charged £1.75"
    You will notice that in their reply they have omitted 'Caller Display' after 'at Home' although the bill clearly shows this at line 1. above.
    Can somebody please tell me should I be paying £1.75 a month? If this is so then will line 2. revert to a further £1.75 after the 12 month's expiry which will mean £3.50 a month in total'.
    I just thought as a simpleton that I was getting Caller Display entirely free for 12 months by signing a new contract. Maybe life is not that simple?

    john46: You state "to put it very simply the 1.75 is charged on one line and credited back on the next line".
    Well it isn't. Had there had been such a credit on the bill I would not have raised a bill query with BT or this forum.
    Below is my total bill where you can see I have no credit shown. It all adds up to £34.50 including the £1.75 Caller Display fee.
    I cannot get a reply out of BT or even an acknowledgement to my email querying the charge. What do you suggest I do? Send a specific mail giving them 7 days' notice that I will cancel the Direct Debit and send a cheque less the missing credits, if I don't receive a satisfactory answer?
    Your reply and those of the 2 other respondents now confirm that there should be a credit line of £1.75.
    Whatever happens you have proven BT owes me £1.75 for each month this has occurred. May I therefore use your name and your answer in a further email to BT? It will be interesting to see if that prompts a response.
    Line Rental
    28 Apr - 27 May 14 £0.00
    Barring withheld calls
    28 Apr - 27 May 14 This is the cost of your Barring withheld calls charged in advance (£4.75 a  month) £4.75
    BT Privacy at Home - Caller Display 28 Apr - 27 May 14 This is the cost of your BT Privacy at Home - Caller Display up to 27 May  2014 at £1.75 a month £1.75
    BT Privacy with Caller Display free for 12 months 28 Apr - 27 May 14 £0.00
    You're making great savings by paying your line rental upfront for the next 12 months. More information
    Package
    Broadband and Calls 28 Apr - 27 May 14 This is the cost of your Package at £18.00 a month, charged in advance from
    28 Apr 2014 to 27 May 2014. This gives you:
    Calling Plan Unlimited Weekend Calls
    Broadband BT Infinity 1
    £18.00
    Unlimited Anytime Calls Add-on 28 Apr - 27 May 14 This is the cost of your Unlimited Anytime Calls Add-on charged in advance  (£7.00 a month)
    Includes anytime calls to UK landlines and discounts to UK mobiles £7.00
    BT Sports
    BT Sport HD Pack 28 Apr - 27 May 14 3.00 a month, charged in
    advance from 28 Apr 2014 to 27 May 2014 £3.00
    Total line rental and other basic charges £34.50

  • How to show a report for 'Previous Month' Data

    Hi Gurus,
    I have a requirement, where i have to default my report to show previous month data.
    Scenario:
    My prompts by Default are set to CURRENT (current year,quarter,month). once the user logs in, the report should display data for month 'Nov' instead of 'Dec'.
    I tried using TIMESTAMPADD() in the formula , but it didn't work, though i don't see any error. Not sure if i 'm missing something.
    Is there a way to achieve this.I 'm using OBIEE 11.1.1.6.
    Any help is highly Appreciated ! Please.
    Thanks,
    Ramya

    From what you wrote I am assuming the user can manually save the report results to the Excel file.
    If your report uses ALV Grid it is possible to export the data to a spreadsheet (one of the functions available in the ALV tool bar).
    If you have used WRITE statements it is also possible to save the output as a spreadsheet (menu System -> List -> Save), but the latter will not produce as nice a spreadsheet if the data don't form a matrix. In other words, some work may be necessary in the spreadsheet afterwards before it has the format your user wants.

  • HT3275 I've 1.85TB empty space on my time Machine, but it only backs up to the beginning of the previous month. it should have weekly back-ups for every month before that. Any ideas why it deletes stuff older than a month?

    I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
    Thanks, Rigby.

    If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
    If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
    If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars".

  • Need help with SQL retrieval for previous month till current date

    Hi ,
    Need help generating statistics from previous month from date of enquiry till current date of enquiry.
    and have to display it according to date.
    Date of enquiry : 03/02/2012
    Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
    sample1 20 30 40
    sample 2 40 40 50
    sample 3 50 30 30
    Hope you guys can help me with this.
    Regards

    Hi,
    932472 wrote:
    Scenario
    1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
    2)displaying the count of the application made based on the date.
    Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
    sample 1 30 40 50 44 30
    sample 2 35 45 55
    sample 3 36 45 55Explain how you get those results from the sample data you posted.
    It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
    SELECT     application_type as Application_type
    ,     COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END)     AS 01012012 (should be getting dynamically)
    ,     COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END)     AS 02022012
    ,     COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END)     AS 03022012
    , COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END)     AS 04022012
    FROM     table_1
    GROUP BY application_type
    ORDER BY     application_typeThat's the bais idea.
    You can simplify it a little by factoring out the date differences:WITH got_d     AS
         SELECT     qty
         ,     TRUNC ( dt
              - ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                        , -1
              ) AS d
         FROM table1
         WHERE     dt     >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                        , -1
         AND dt     < TRUNC (SYSDATE) + 1
    SELECT     SUM (CASE WHEN d = 1 THEN qty END)     AS day_1
    ,     SUM (CASE WHEN d = 2 THEN qty END)     AS day_2
    ,     SUM (CASE WHEN d = 62 THEN qty END)     AS day_62
    FROM     got_d
    See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Billing call data for previous months

    I have always been on paperless billing to save money. As Kerry said in a previous post to encourage paperless billing:
    "Get organised
    Signing up to paper-free billing with My BT can save you time – and it makes finding your latest bill much easier than searching through endless cabinets and drawers for that elusive bit of paper.  Copies of your bills are stored online for 15 months, so they're always there to view, download and print when you need them. One secure online log-in gets you instant access to your bill.:"
    I now find that you can only look at call data for the latest months bill. It is no good having paperless billing if you have to use loads of your own paper to print out all the data.

    Patty-L wrote:
    @    john46  You could of course store the data on your computer in pdf format each month I do  and can go back years.
    Thank you John for the information it has worked (I can now save on paper usage)    
    Regards Pat
    And Ink, and wear and tear on the printer
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • Struggling with MDX Filter Expression for Previous Month in SSRS

    I am trying to query only data from the previous month. 
    I looked at my Month member and the it looks like so... [Date].[Calendar].[Month].&[2015-04-01T00:00:00]
    Here is my filter expression:
    StrToMember ("[Date].[Calendar].[Month].&[" + format(now(),"yyyy-MM") +  "-01T00:00:00]" ).lag(1)
    I am not getting any errors, I am just getting getting "No rows found" - however there is certainly data in last month. I even tried removing the lag() function thinking that might be causing it, but there are still no errors, just no rows returned.
    Here is the complete query:
     SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, NON EMPTY { ([Date].[Calendar].[Date].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( StrToMember ("[Date].[Calendar].[Month].&[" +
    format(now(),"yyyy-MM") +  "-01T00:00:00]" ) ) ON COLUMNS FROM [Data Warehouse]) 

    Hi S,
    I can't tell exactly what your issue is, but I can give you a couple of tips to help diagnose it.
    Try the following queries. They aren't fixes, just simplifications of your query to help you diagnose where the issue is.
    --This query will let you what your string function is returning with what you want.
    With member measures.x as "[Date].[Calendar].[Month].&["
    + format(now(),"yyyy-MM") +  "-01T00:00:00]" 
    member measures.y as [Date].[Calendar].currentmember.uniquename
    select {measures.x,measures.y} on 0
    [Date].[Calendar].[Month].&[2015-04-01T00:00:00] on 1
     from [data warehouse]
    --This query will give you the date without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, StrToMember ("[Date].[Calendar].[Month].&["
    + format(now(),"yyyy-MM") +  "-01T00:00:00]" )  on rows FROM [Data Warehouse]) 
    --This query will give you the date with lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, [Date].[Calendar].[Month].&[2015-04-23T00:00:00].lag(1)  on rows FROM [Data Warehouse]) 
    --This query will give you the date with lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, StrToMember ("[Date].[Calendar].[Month].&[" + format(now(),"yyyy-MM") +  "-01T00:00:00]" ).lag(1)  on rows FROM [Data Warehouse]) 
    --This query will show you the member without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, NON EMPTY
    { ([Date].[Calendar].[Date].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( StrToMember ("[Date].[Calendar].[Month].&[2015-04-01T00:00:00]" ) ) ON COLUMNS FROM [Data Warehouse]) 
    --This query will show you the member without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, NON EMPTY
    { ([Date].[Calendar].[Date].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( StrToMember ("[Date].[Calendar].[Month].&[2015-04-01T00:00:00]" ) ) ON COLUMNS FROM [Data Warehouse]) 
    --This query will give you the date without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, StrToMember
    ("[Date].[Calendar].[Month].&[" + format(now(),"yyyy-MM") +  "-01T00:00:00]" )  on rows FROM [Data Warehouse]) 
    --This query will give you the date without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, StrToMember
    ("[Date].[Calendar].[Month].&[" + format(now(),"yyyy-MM") +  "-01T00:00:00]" )  on rows FROM [Data Warehouse]) 
    --This query will give you the date without lag
    SELECT NON EMPTY { [Measures].[Completes] } ON COLUMNS, StrToMember
    ("[Date].[Calendar].[Month].&[" + format(now(),"yyyy-MM") +  "-01T00:00:00]" )  on rows FROM [Data Warehouse]) 
    Richard

  • HP Officejet G85 - how do i print a fax report for previous month?

    When I select "Print Fax Report" from menu, prints only last 30 faxes. Can I print fax report of a longer period, such as the previous month?

    Hi there,
    Unfortunately I do not see any options availble like that for the G85. There does not seem to be a readily available option sorry.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Is it possible to run MRKO settlement for previous month date.

    Hi Experts,
    I  have a requirement from client, where they need to do the MRKO settlement in previous month period.
    I know the posting date and document date by default taken as current date.
    For Example : I have done the GI on 25/05/2010 and forgot to do the settlement on the same month
    now suppose on 02/06/2010 i want to do the settlement for 25/05/2010.
    In this case system will take the current date as posting date, is it possible here to change the posting date to
    pervious month period 25/05/2010????
    what is the standar rule according to SAP and if it is possible to post in the back date will it impact anything further.
    Please help me in solvning this issue.
    Rabindra S

    Use Exit "EXIT_RMVKON00_001".
    It read the date from posting date and settle on given posting date
    And follow the follwing code....
    DATA: wa_rkwa TYPE rkwa,
          wa_bseg TYPE bseg,
          wa_bkpf TYPE bkpf,
          fieldname(80),
          myidx TYPE i,
          ex_poper LIKE t009b-poper,
          ex_gjahr LIKE t009b-bdatj.
    FIELD-SYMBOLS: <fs_date> TYPE rkwa-bldat.
    MOVE '(RMVKON00)SO_BUDAT-HIGH' TO fieldname.  "<fs_bkpf>-budat.
    ASSIGN (fieldname) TO <fs_date>.
    LOOP AT t_rkwa INTO wa_rkwa.
      CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
        EXPORTING
          i_date               = <fs_date>
          i_periv              = 'V3'
       IMPORTING
         e_buper              = ex_poper
         e_gjahr              = ex_gjahr
       EXCEPTIONS
         input_false          = 1
         t009_notfound        = 2
         t009b_notfound       = 3
         OTHERS               = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      READ TABLE t_bkpf INTO wa_bkpf
                    WITH KEY bukrs = '1000'
                             belnr = wa_rkwa-belnr
                             gjahr = wa_rkwa-mjahr.
      IF sy-subrc EQ 0.
        myidx = sy-tabix.
        wa_bkpf-monat = ex_poper.
        wa_bkpf-gjahr = ex_gjahr.
        wa_bkpf-budat = <fs_date>.
        wa_bkpf-bldat = <fs_date>.
        MODIFY t_bkpf FROM wa_bkpf INDEX myidx. " TRANSPORTING bldat budat.
      ENDIF.
    ENDLOOP.
    Regards
    Rasmi Ranjan Mishra

Maybe you are looking for