Dynamic name for the physical table
Hi Guys,
How to setup dynamic names for the physical table? Where it is useful?*
Pls help me out on this.
thanks
Check this similar post which might be of help dynamic physical table source schema
Cheers,
KK
Similar Messages
-
Assign Logical file name for the physical file path through Program
Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
GauravI think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a® -
Dynamic Name for Yellow Interface Table
Hi All,
Can anybody guide me how to use dynamic name for Yellow Interface Target Table.
Eg: T_SESSIONID.
I tried
1)Refreshing the SESSIONID in a Variable V1 and using T_#V1 directly
2) Refreshing the T_#V1 in a Variable V2 and using #V2
But its not creating properly.
Please guide.You want to create dynamic target table name right?
You can refresh a variable like #GET_SESSION
#GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
My tmp table name like TMP_#GET_SESSION
then in your package refresh #GET_SESSION variable and you can use it.
I hope this can be helpful
Thanks -
Hi,
I was wondering if it would be possible to name the PDF outputs dynamically?
Say for example, I have a tag in the XML <TemplateName>ABC</TemplateName>. Can I have the output PDF with the name 'ABC'?
And
Is it possible to explicitly specifiy the name 'ABC' somewhere in the INI file so that the outputs generated will be multiple versions for 'ABC' (like ABC001, ABC002 etc)?
Many Thanks,
PhewPhew,
As mentioned earlier, in order to rename the file you have two steps:
1) Make the input data value available to genprint - this is normally done by creating a global variable.
2) Configure the PDF print driver. Depending on the version of Documaker you are using you can refer to one of the following manuals:
a) 11.5 - Using the PDF Print Driver - http://docs.oracle.com/cd/E16256_01/pdf_book.pdf (see section "Generating Separate Print Files")
b) 12.x - Printers Reference - http://docs.oracle.com/cd/E22582_01/printers_rg.pdf (see section "Generating Separate Print Files")
Essentially you will configure the INI like so:
< BatchPrint >
PDF = ~FUNCTION .PDF
Where ~FUNCTION is an INI Built-in function like one of these:
~DALRUN {function name} - executes a DAL function to return a string which is used to name the file.
~DALVAR {variable name} - returns the value of a DAL variable which is used to name the file.
Don't forget the space after the built-in function before the static bit of the filename...
Best,
Andy -
Dynamic names for I$ ,C$ and E$ tables in ODI
Dear ODI Team,
We have a requirement where we are loading header data and then line data in our Package.ODI internally creates work tables to load data into target tables.If multiple sessions of the same interface is executed at the same time the I$table of the previous session affects the I$ table of the next session.Hence if session1 has completed loading then it is at the stage of dropping the I$ table.Hence the second session is erroring out.Kindly let me know if there is an option to create these work table names dynamically for each session
Thanks ,
AnandEven I an getting similar error trying to use Global variable for dynamic names of the work tables
Scripts Generated by the IKM :
create table XDO.#global."gv_test_dynameSSTST_AN"
ANY_NEW_ID NUMBER(22) NULL,
ANY_NEW_ATTRIB1 VARCHAR2(50) NULL,
ANY_CONC_ATTRIB2 VARCHAR2(150) NULL,
DECODE_CODE1 CHAR(5) NULL,
ANY_REF_CODE2 VARCHAR2(60) NULL,
ANY_DATE1 DATE NULL,
ANY_DATE2 DATE NULL,
IND_UPDATE char(1)
NOLOGGING
Getting the following error on execution :
911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
java.sql.SQLException: ORA-00911: invalid character
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595) -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy -
Can anyone tell me the field name, table name for the following scenario?
Hi All,
Can anyone tell me the field name and the respective table name for the following scenario's?
1. A report to list all the materials to which Invoice is done and delivery is pending.
2. A report for Order tracking.
3. A report, which gives PO(Purchase Order), Pricing details.
4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from stock.
Thanks & Regards,
P.Gowrishanker
Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AMI believe that OmniVision Technologies has the contract for the 3gs.
-
Table name for the status Cstd
Hi
Need the table name for the sales order line item status Cstd
Steps
Go to the sales order line item
go to the Tab status
under that in processing status--> system status
here Cstd is there but we are not able to find the table name for that
Strecture is RV45A and field name is STTXT
we are planing to restrict the PP order being released if the status is not Cstd
PP order should release if the status in Sales order line item is Cstd
Can you help to findout the table name foth above field
Thanks
Kameshwar RaoHi
Table name is VBUP and the method to check the creation of Production order is BADI workorder_update
I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
br, Ajay M -
Table names and field names for the PO item details
Hi,
I want table names and field name for the below fields.
I have PO number i want to get below fields for PO.
<b>Confirmed Ship Date (or actual ship date if already shipped) PGI Date
Quantity of Product to be shipped (base unit of measure) Sales Order Qty
Shipped Quantity of Product (normally zero)
Shipped From Plant Name</b>
Excellent reward is compulsary.
reagrds,
vijayHi,
Please find below the some of tables and fields for the PO. But from your query hope you are refering some other PO.
Table : EKPO
Fields
KTMNG - Target Qty
MENGE - Open Qty
WEPOS - Goods Receipt
LEWED - Latest GR date
Table : EORD
Fields
RESWK - Procurement plant
FRESW - Fixed Issuing plant
LIFNR - Vendor
FLIFN - Fixed vendor
Regards,
BK -
Find the sequence name for a particular table
Hi,
Please give query to find the sequence name for a particular table in oracle.
ThanksI mean getting List of Sequence names defined in DB.
I got the answers
select *from user_sequences -
Table name for the AMOUNT field in header details of costomer invoice
hi experts,
I need the table name for the field AMOUNT(wrbtr) which is in header details in fb70 tcode .I have checked many tables like bseg bsid, there its showing the amount but at item level.Hi,
the table behind structure INVFO is RBKP (Header level).
For item level you have table RSEG.
These tables refer to MM.
Once the MM documents are completed and you post the corresponding invoice RBKP data goes to BKPF and RSEG data goes to BSEG data.
The relattion between MM(RBKP/RSEG) and FI(BKPF/BSEG) documents is in field BKPF-AWKEY. This field usually contains (RBKP-BELNRRBKP-GJAHR that is MM documentMM year).
e.g. (BKPF-AWKEY = 51056024412009)
Best regards. -
Table name for the field FAEDT(net due date)
hi every body,
plz can any body tell me the table name for the field net due date(FAEDT).
its very very urgent
thanq.Hi mark chalfen,
thanq very much ur reply.
actually my client want to change the payment term for all the vendor invoices.so wt we did is... we created aprogram to change the old payment term to new payment term in the vendor line items(fbl1n).
when we run the program its changing the payment term and the base line date and the NO of days in the vendor linitems.but it not changing the net due date based on the new baseline date.
i think with out changing the net due date only changing the payment term is use less.coz the item again show as due in the same date.
so how can we change the net due date based on the new baseline date.?from which table we can take the field FAED and update with the new date.
plz advise me?
thanq. -
Table name for the structure MEPO1211
Hi Friends,
I want to find out the the Purchase Orders created with USD currency. This currency indicator is not available in the table EKPO. On checking the PO, the currency field is in the strucure MEPO1211.
Kindly let me know the table name where the PO with currency is stored or the table name for the structure MEPO1211.
Thanks in advance.
Regards,
Mark KHello Mark
If the fields belong to the PO header then EKKO is the table you should look for.
In case of item related data the table is EKPO.
In any case structure MEPO1211 just belongs to screen 1211 in the PO application.
Further Reading:
[Purchase order item - cl_po_header_handle_mm|https://wiki.sdn.sap.com/wiki/display/ABAP/Purchaseorderitem-cl_po_header_handle_mm]
Regards
Uwe -
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish -
Table name for the transaction BNK_APP
Hi,
I want to know the table name for the fields like Batch pymt no , company code , batch currency used in structure BNK_STR_BATCH_REL_APPR .
Thanks & RegardsCan you share answered reply please for benifit of all
Thanks
Maybe you are looking for
-
Has anyone else had this problem? My ipod has been working perfectly for years and all of a sudden i have gone through three sets of headphones at least in the last month, i have discovered that it is a problem with where the headphones go......no id
-
External drive conntected to Time Capsule keeps losing connection
I've been having this problem since I bought my TC over one year ago. Other than this everything works fine (aside from the occasional need for a restart). I have an external 500GB drive attached to my 500GB TC via usb. I use the TC strictly for back
-
10.0.9 to 10.11 update issues - re: project files not updating
#1 - I understand the function of libraries/events/projects in the 10.1+ version of Final Cut X, so this is not a case of not being able to identify projects contained within an event. FCPX simply refuses to update projects created in an older versio
-
Java.lang.Integer defaulting to zero
I am using JAXB for several years, but never dived into details. I am not using a schema. When I am unmarshalling a XML file, JAXB always defaults my java.lang.Integer attributes to zero instead to null, when the attribute is not given in the XML fil
-
How to respond to Verison sharing my private calls with the government?
Numerous news accounts on Broadcast television, cable news, the radio, and newspapers are reporting that Verizon releases ALL my Verizon business activity--phone call information and content, emails sent through Verizon Wireless Broadband, etc.--with