Dynamic names for class and variable

Hi Folks,
How do you make a new instance of a class with a dynamic name.
var dynamicname = new dynamicname()
i try something
var this["test"]:Class = new ["Test"]()
but offcourse its not this...
I need this couse i have a librairy with SWC fonts they are only reference.. I get the font name from a CSS file and after i need to make a instance of the SWC file so the font is embedded.
Thanks anyone who can help me!
Cheer, Michierl

Btw Murphy its not working......
var fontRef = Class(getDefinitionByName("Arial"));
var font = new fontRef();
trace(font);
The varibable definition not defined.
I have 5 fonts as SWC Files set as reference lib in flex.
But i dont wann to load all fonts yet cosue that will make my movie 200kb ... so i copy the fontname of the stylesheet and then make a instance of that font class.
But how? With yours it need already a refrences to that class.

Similar Messages

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

Dynamic Name for Yellow Interface Table

Hi All,
Can anybody guide me how to use dynamic name for Yellow Interface Target Table.
Eg: T_SESSIONID.
I tried
1)Refreshing the SESSIONID in a Variable V1 and using T_#V1 directly
2) Refreshing the T_#V1 in a Variable V2 and using #V2
But its not creating properly.
Please guide.

You want to create dynamic target table name right?
You can refresh a variable like #GET_SESSION
#GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
My tmp table name like TMP_#GET_SESSION
then in your package refresh #GET_SESSION variable and you can use it.
I hope this can be helpful
Thanks

What are the table names for CRM and APO?

hi friends,
what are the table names for CRM and APO?
Regards
suneel.

hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

Table name for opening and closing stock

Hi gurus,
i want table name for opening and closing stock . How to calculate this opening and closing stock in report.
Murali.

Murali,
Check out in OINM, which maintains all the details of the stock transactions..
Hope it might help you..
Regards
Gattu

Table name and field name for accounting and material document in MM

Hi
Table name and field name for accounting and material document in MM
how can we diffreentiate the accounting document in MIGO and MIRO ?

Hi,
For Goods reciept documents you can search from the tables MKPF-Header: Material Document and MSEG-Document Segment: Material,
and for Invoice documents you can search in tables BKPF-Accounting Document Header and BSEG-Accounting Document Segment.
For differentiating the Accounting documents in MIRO and MIGO based on posting key and document types for GRN -document key is -WE and for MIRO document is -RE.......
Hope this may help you.....................

Dynamic name for the physical table

Hi Guys,
How to setup dynamic names for the physical table? Where it is useful?*
Pls help me out on this.
thanks

Check this similar post which might be of help dynamic physical table source schema
Cheers,
KK

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

Dynamic Selection for FBL1N and FBL5N reports

Dear all,
is it possible to show more fields in Dynamic Selection for FBL1N and FBL5N reports?
Thanks in advance
Alberto

Dear Alberto,
Please refer to the SAP note 310886. In the note you should be able
to see how to add fields in to the dynamic selection , and the fields,
which are available for this.
I hope this can help You.
Mauri

[svn] 3538: -Fix package names for Animate3D and Rotate3D effects as well as their instances .

Revision: 3538
Author: [email protected]
Date: 2008-10-09 09:47:00 -0700 (Thu, 09 Oct 2008)
Log Message:
-Fix package names for Animate3D and Rotate3D effects as well as their instances.
-added to manifest.xml and mxml-2009-manifest.xml so they would be included in the compile
Ticket Links:
http://bugs.adobe.com/jira/browse/mxml-2009
Modified Paths:
flex/sdk/trunk/frameworks/mxml-2009-manifest.xml
flex/sdk/trunk/frameworks/projects/flex4/manifest.xml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animate3D.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Rotate3D.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/Animate3DInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/Rotate3DInstance.as

From man pkgbuild:
It is also possible to specify an optional filename, which is helpful with weird URLs and for handling multiple source files with the same name. The syntax is: source=('filename::url')

My account names for iCloud and iTunes is different, is this why my Iphone4 is not syncing with my iMac?

My account names for iCloud and iTunes is different, is this why my Iphone4 is not syncing with my iMac?

No, perfectly normal to have a separate iTunes account for music/app purchases to the one you use for iCloud syncing of contacts, notes, etc.

Dynamic names for I$ ,C$ and E$ tables in ODI

Dear ODI Team,
We have a requirement where we are loading header data and then line data in our Package.ODI internally creates work tables to load data into target tables.If multiple sessions of the same interface is executed at the same time the I$table of the previous session affects the I$ table of the next session.Hence if session1 has completed loading then it is at the stage of dropping the I$ table.Hence the second session is erroring out.Kindly let me know if there is an option to create these work table names dynamically for each session
Thanks ,
Anand

Even I an getting similar error trying to use Global variable for dynamic names of the work tables
Scripts Generated by the IKM :
create table XDO.#global."gv_test_dynameSSTST_AN"
ANY_NEW_ID NUMBER(22) NULL,
ANY_NEW_ATTRIB1 VARCHAR2(50) NULL,
ANY_CONC_ATTRIB2 VARCHAR2(150) NULL,
DECODE_CODE1 CHAR(5) NULL,
ANY_REF_CODE2 VARCHAR2(60) NULL,
ANY_DATE1 DATE NULL,
ANY_DATE2 DATE NULL,
IND_UPDATE char(1)
NOLOGGING
Getting the following error on execution :
911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
java.sql.SQLException: ORA-00911: invalid character
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)

Using java class and variables declared in java file in jsp

hi everyone
i m trying to seperate business logic form web layer. i don't know i am doing in a right way or not.
i wanted to access my own java class and its variables in jsp.
for this i created java file like this
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
    public static void main(String args[]){
        Connection con = null;
        ResultSet rs=null;
        Statement smt=null;
        try{
            Class.forName("com.mysql.jdbc.Driver").newInstance();
            con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
            smt=con.createStatement();
           rs= smt.executeQuery("SELECT * FROM emp");
           while(rs.next()){
            String str = rs.getString("Name");
            }catch( Exception e){
                String msg="Exception:"+e.getMessage();
            }finally {
      try {
        if(con != null)
          con.close();
      } catch(SQLException e) {}
}next i created a jsp where i want to access String str defined in java class above.
<%--
    Document   : fisrt
    Created on : Jul 25, 2009, 3:00:38 PM
    Author     : REiSHI
--%>
<%@page import="ris.NewClass"%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>JSP Page</title>
    </head>
    <body>
        <h1><%=str%></h1>
    </body>
</html>I wanted to print the name field extracted from database by ResultSet.
but it gives error cannot find symbol str.
please help me to find right way to do this.
i am using netbeans ide.

Very bad approach
1) Think if your table contains more than one NAMEs then you will get only the last one with your code.
2) Your String is declared as local variable in the method.
3) You have not created any object of NewClass nor called the method in JSP page. Then who will call the method to run sql?
4) Your NewClass contains main method which will not work in web application, it's not standalone desktop application so remove main.
Better create an ArrayList and then call the method of NewClass and then store the data into ArrayList and return the ArrayList.
It should look like
{code:java}
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
    public static ArrayList getNames(){
        Connection con = null;
        ResultSet rs=null;
        Statement smt=null;
        ArrayList nameList = new ArrayList();
        try{
            Class.forName("com.mysql.jdbc.Driver").newInstance();
            con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
            smt=con.createStatement();
           rs= smt.executeQuery("SELECT * FROM emp");
           while(rs.next()){
            nameList.add(rs.getString("Name"));
           return nameList;
            }catch( Exception e){
                String msg="Exception:"+e.getMessage();
               </code><code class="jive-code jive-java"><font>return nameList;</code><code class="jive-code jive-java">
            }finally {
      try {
        if(con != null)
          con.close();
      } catch(SQLException e) {}
      </code><code>return nameList;</code>
<code class="jive-code jive-java">    }

Dynamic Names for the Outputs

Hi,
I was wondering if it would be possible to name the PDF outputs dynamically?
Say for example, I have a tag in the XML <TemplateName>ABC</TemplateName>. Can I have the output PDF with the name 'ABC'?
And
Is it possible to explicitly specifiy the name 'ABC' somewhere in the INI file so that the outputs generated will be multiple versions for 'ABC' (like ABC001, ABC002 etc)?
Many Thanks,
Phew

Phew,
As mentioned earlier, in order to rename the file you have two steps:
1) Make the input data value available to genprint - this is normally done by creating a global variable.
2) Configure the PDF print driver. Depending on the version of Documaker you are using you can refer to one of the following manuals:
a) 11.5 - Using the PDF Print Driver - http://docs.oracle.com/cd/E16256_01/pdf_book.pdf (see section "Generating Separate Print Files")
b) 12.x - Printers Reference - http://docs.oracle.com/cd/E22582_01/printers_rg.pdf (see section "Generating Separate Print Files")
Essentially you will configure the INI like so:
< BatchPrint >
PDF = ~FUNCTION .PDF
Where ~FUNCTION is an INI Built-in function like one of these:
~DALRUN {function name} - executes a DAL function to return a string which is used to name the file.
~DALVAR {variable name} - returns the value of a DAL variable which is used to name the file.
Don't forget the space after the built-in function before the static bit of the filename...
Best,
Andy

Dynamic names for class and variable

Similar Messages

Maybe you are looking for