Dynamic Profile Creation

Is there a way to create a profile with a subset of the user's name?
I have SecurID authenication module active in my Portal 6 environment. When a new user logs in (username format jdoe12345) an LDAP entry gets created as uid=jdoe12345,ou=People,o=isp
I want a subset for the username to be created-- not the whole name.
I want it to just be uid=12345,ou=People,o=isp
Could this be done.

Sounds interesting :-)
I would try to create a custom auth module,
which intercepts userid token from SecureID
auth module and removes the prefix from uid.
Cheers,
Alex :-)

Similar Messages

Explorer.exe crashes at start of profile creation when domain-joined (using Samba 3.6.25)

Not sure if this is the right forum?
Getting this error (copied from Event Viewer) on a Windows 8.1 Pro client - an event ID of 1000, every time at the start of profile creation when logging in with a domain account. So explorer.exe crashes because of "twinui.appcore.dll" and profile
creation is taking a very long time (about 17 minutes).
Then after being stuck during "Almost ready" screen we are getting a Start-button that is stuck (non-clickable) (and also arrows on the metro-screen icons). Restarting explorer.exe manually helps to get a functional Start-button again.
Tried using a roaming profile and without using a roaming profile (Group Policy setting to always keep profiles local). That does not seem to matter.
Naam van toepassing met fout: Explorer.EXE, versie: 6.3.9600.17667, tijdstempel: 0x54c6f7c2
Naam van module met fout: twinui.appcore.dll, versie: 6.3.9600.17415, tijdstempel: 0x54503801
Uitzonderingscode: 0x80270233
Foutmarge: 0x000000000008cb57
Id van proces met fout: 0xf28
Starttijd van toepassing met fout: 0x01d05bf587567d80
Pad naar toepassing met fout: C:\Windows\Explorer.EXE
Pad naar module met fout: C:\Windows\System32\twinui.appcore.dll
Rapport-id: cf9c3ec8-c7e8-11e4-8262-0019bbd6f620
Volledige pakketnaam met fout:
Relatieve toepassings-id van pakket met fout:
Using Samba 3.6.25 with an LDAP back-end. Installed all updates for Windows 8.1 Pro client.
Thanks in advance for any advice.

Pasting the crash dump analysis using WinDbg (x64):
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\LocalDumps\explorer.exe.824.dmp]
User Mini Dump File with Full Memory: Only application data is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: SingleUserTS
Built by: 6.3.9600.17031 (winblue_gdr.140221-1952)
Machine Name:
Debug session time: Thu Mar 12 11:53:12.000 2015 (UTC + 1:00)
System Uptime: 0 days 21:10:37.682
Process Uptime: 0 days 0:01:05.000
Loading unloaded module list
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(338.f94): Unknown exception - code 80270233 (first/second chance not available)
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000      call    kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
0:018> !analyze -v
*                        Exception Analysis
*** ERROR: Symbol file could not be found. Defaulted to export symbols for sppc.dll -
FAULTING_IP:
twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+c7
00007ffe`bed7cb57 488b4d37        mov     rcx,qword ptr [rbp+37h]
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffebed7cb57 (twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0x00000000000000c7)
   ExceptionCode: 80270233
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: ffffffff80070005
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000000a14f560 rbx=000000000a14fa70 rcx=000000000a14f560
rdx=0000000000000000 rsi=0000000000000001 rdi=000000000a14f560
rip=00007ffecb2faabe rsp=000000000a14f480 rbp=000000000a14fad9
r8=0000000000000000 r9=0000000000000006 r10=0000000000000000
r11=00007ffecb544dd7 r12=00007ffebed00090 r13=0000000008234160
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00000244
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000      call    kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
PROCESS_NAME: explorer.exe
ERROR_CODE: (NTSTATUS) 0x80270233 - <Unable to get error code text>
EXCEPTION_CODE: (HRESULT) 0x80270233 (2150040115) - <Unable to get error code text>
EXCEPTION_PARAMETER1: ffffffff80070005
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: explorer.exe
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
FAULTING_THREAD: 0000000000000f94
BUGCHECK_STR: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
PRIMARY_PROBLEM_CLASS: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
DEFAULT_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
LAST_CONTROL_TRANSFER: from 00007ffebed7cb57 to 00007ffecb2faabe
STACK_TEXT:
00000000`0a14f480 00007ffe`bed7cb57 : 00000000`80070005 00000000`00000004 ffffffff`80070005 00000000`00000000 : kernel32!RaiseFailFastException+0xae
00000000`0a14fa50 00007ffe`bed7c8c2 : 00000000`00000a9c 00000000`0a14fc20 00000000`000003a8 00000000`000003a8 : twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0xc7
00000000`0a14fb40 00007ffe`bed8b349 : 00000000`00000000 00007ffe`bed00090 00000000`000003a8 00000000`00000004 : twinui_appcore!CCriticalFailureHandler::HandleFailure+0xba
00000000`0a14fb90 00007ffe`bed19d8b : 00000000`08242340 00000000`0a14fc00 00000000`00000000 00007ffe`bed34838 : twinui_appcore!`Microsoft::WRL::Module<1,Microsoft::WRL::Details::DefaultModule<1> >::Create'::`2'::`dynamic atexit destructor for 'module''+0x7a79
00000000`0a14fbd0 00007ffe`c5055bf1 : 00000000`80070005 00000000`08242340 00000000`00000000 00007ffe`bed19d30 : twinui_appcore!CProcessLifetimeManager::PerformDelayedInitialization+0x5b
00000000`0a14fc20 00007ffe`c5055519 : 00000000`00000000 00000000`08242340 00000000`00000000 00000000`00000034 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_CreateComponents+0x536
00000000`0a14fcc0 00007ffe`c505566e : 00007ffe`00000045 00000000`00000000 00000000`082335f8 00000000`02ea60e8 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_ImmersiveShellComponentsThreadProcInternal+0x17d
00000000`0a14fd50 00007ffe`b41995cd : 00007ffe`c5050000 00007ffe`c50555f0 00000000`00000000 00000000`00000000 : windows_immersiveshell_serviceprovider!CImmersiveShellController::s_ImmersiveShellComponentsThreadProc+0x7a
00000000`0a14fd80 00007ffe`cb2113d2 : 00007ffe`b4199580 00000000`00000000 00000000`00000000 00000000`00000000 : verifier!AVrfpStandardThreadFunction+0x4d
00000000`0a14fdc0 00007ffe`cb51e954 : 00007ffe`cb2113b0 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x22
00000000`0a14fdf0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x34
FOLLOWUP_IP:
twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
00007ffe`bed7c8c2 488b6c2458      mov     rbp,qword ptr [rsp+58h]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: twinui_appcore
IMAGE_NAME: twinui.appcore.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 54503801
STACK_COMMAND: ~18s; .ecxr ; kb
FAILURE_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_80270233_twinui.appcore.dll!CCriticalFailureHandler::HandleFailure
BUCKET_ID: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:shell_component_startup_failure_error_code_ffffffff80270233_80270233_twinui.appcore.dll!ccriticalfailurehandler::handlefailure
FAILURE_ID_HASH: {bc588def-f8dc-26b8-dac8-a057fb6557c4}
Followup: MachineOwner
0:018> lmvm twinui_appcore
start             end                 module name
00007ffe`becf0000 00007ffe`bee20000   twinui_appcore   (pdb symbols)          downstreamstore\twinui.appcore.pdb\310246EA4A1E4BF8A48502B727A7376B1\twinui.appcore.pdb
    Loaded symbol image file: twinui.appcore.dll
    Image path: C:\Windows\System32\twinui.appcore.dll
    Image name: twinui.appcore.dll
    Timestamp:        Wed Oct 29 01:42:41 2014 (54503801)
    CheckSum:         0013A0E7
    ImageSize:        00130000
    File version:     6.3.9600.17415
    Product version: 6.3.9600.17415
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        2.0 Dll
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     TWINUI.APPCORE
    OriginalFilename: TWINUI.APPCORE.dll
    ProductVersion:   6.3.9600.17415
    FileVersion:      6.3.9600.17415 (winblue_r4.141028-1500)
    FileDescription: TWINUI.APPCORE
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
Does this make any sense to anyone?

Office 2013 latest update broke new profile creation on all network computers

Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>

Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support

Background job fails for BDC profile creation and role assignment

Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
   1. ZMIS_AUTH_OBJECT_CREATE
       Variant : auth-create
   2. ZMIS_AUTH_ASSIGN_TO_ROLE
       Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
Chetan

Hi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
        EXPORTING
         ctu                    = 'X'
         mode                   = p_mode
         UPDATE                 = 'L'
*   GROUP                  =
*   USER                   =
*   KEEP                   =
*   HOLDDATE               =
         nodata                 = '/'
         g_authname_001         = 'ZDUMMY_MIS'
          g_targetauth_002       = wa_tab-auth
          g_authtxt_003          = wa_tab-short_desc
          g_authtxtmd_004        = wa_tab-med_desc
         marked_04_005          = 'X'
          g_authtxt_006          = wa_tab-short_desc
          g_authtxtmd_007        = wa_tab-med_desc
         tctiobjnm_04_008       = 'ZBUS_UNIT'
          g_authtxt_009          = wa_tab-short_desc
          g_authtxtmd_010        = wa_tab-med_desc
         marked_05_011          = ''
         opt_01_012             = 'EQ'
          low_01_013             = wa_tab-bu
          g_authtxt_014          = wa_tab-short_desc
          g_authtxtmd_015        = wa_tab-med_desc
         marked_04_016          = 'X'
          g_authtxt_017          = wa_tab-short_desc
          g_authtxtmd_018        = wa_tab-med_desc
         tctiobjnm_04_019       = 'ZCONTRCT'
          g_authtxt_020          = wa_tab-short_desc
          g_authtxtmd_021        = wa_tab-med_desc
         marked_05_022          = ''
         opt_01_023             = 'EQ'
          low_01_024             = lv_contract
          g_authtxt_025          = wa_tab-short_desc
          g_authtxtmd_026        = wa_tab-med_desc
          g_authtxt_027          = wa_tab-short_desc
          g_authtxtmd_028        = wa_tab-med_desc
          g_authname_029         = wa_tab-auth
* IMPORTING
*   SUBRC                  =
       TABLES
         messtab                = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
      CLEAR wa_text.
      wa_text-text = wa_role-desc.
      wa_text-langu = 'E'.
      APPEND wa_text TO it_text.
      wa_jobrole-agr_name = wa_role-role_name.
      wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
      wa_method-usmethod = 'CHANGE'.
      CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
        EXPORTING
          jobrole          = wa_jobrole
         parent           = wa_parentrole
         method           = wa_method
       TABLES
*   RETURN           =
         shorttext     = it_text
*   LONGTEXT         =
*   MENU_NODES       =
*   MENU_TEXTS       =.
    ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message .
   COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan

Setting dynamic profile values in R3.0

Hi
Using the SDK can we set up profile values dynamically for use with Bursting. Currently it seems I have to define the profile values manually for each user and group or can use only the username, email or fullname for dynamic purposes.
What i want to do is have a table, report or file which has a listing like
user1   USA   blankets
user2   USA   pillows
user1   CAN   pillows
user1   IND     shirts
using this I want to setup a dynamic profile such that user1 = SELECT country FROM table WHERE uname = '%SI%TITLE%'
or any similar mechanism....
thanks for your help!
Asim

Profiles are fairly static things, so I don't think altering them via the SDK would be amenable to dynamically changing profile values or targets on-the-fly.
Sincerely,
Ted Ueda

Dynamic Table Creation & Fill Up

Hello,
Can anyone please guide where I can find examples for dynamic table creation (programmaticaly), with dynamic number of columns and rows, used to place inside text components (or whatever) to fill them with data.
All programmatic.
Using JSF, ADF BC
JDeveloper 10.1.3.1
Thanks
Message was edited by:
RJundi

Hi,
Meybe this article helps: http://technology.amis.nl/blog/?p=2306
Kuba

Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Does Seeburger's SFTP adapter support dynamic filename creation

Hi all,
Does the SFTP adapter support dynamic filename creation.
If yes, then do we have to use UDF's and are there any specific settings that have to be done in the SFTP communication channel.
Please provide a blog which helps in the configuration process of the above case.
thanks,
younus

Dynamic Creation of File using counter in Seeburger Variable:
1. Configuration Needed in the Communication Channel:
The process of dynamic creation of files can be done we have to select the following checkbox in the receiver channel:
Dynamic Attribute in receiver Channel:
Import the following modules:
Localejbs/Seeburger/solution/sftp
Localejbs/Seeburger/AttribMapper
Localejbs/ModuleProcessorExitBean
Enter the desired file naming convention:
Use the Parameter GetCounter("ID") to the place where the counter is expected to come.
2. Configuration Needed in the SeeBurger Workbench:
If the J2EE server is listening on a port different from 50000 (which is the standard for the SAP client 000), the port number must be configured:
Login into the seeburger workbench using the URL
http://<localhost>:<port number>/seeburger/index.html
Select Property Store.
Create or edit the following property:
Parameter
Value
Namespace
http://seeburger.com/xi/SeeFunctions
Key
provider.servlet.server
Value
http://localhost:50000/ (where the port number 50000 must be set
accordingly to the J2EE server configuration).
Note: The configured value (server URL) has to end with a slash (/). Otherwise,
SeeFunctions will not work correctly.
If we need to start the counter from any specific value , it can be configured in the SeeBurger workbench, this value can be maintained in Mapping Variables :

Does UCM support dynamic page creation on contributor mode.?

Hi All,
Does UCM support dynamic page creation on contributor mode.
We want to create new pages and link it into the existing pages
is that possible?
Thanks
~Hari

You can create new secondary pages in contributor mode - you would normally do this via a dynamic list fragment though technically you could also achieve it by switching region content and creating new data files. You can then use the linz wizard to link between pages.
If you are talking about creating new primary pages and sections in your site then you would need to use something like Site Studio Manager fragment.
Tim

Changing dynamic profile-parameters in batch

Hello,
want to change dynamic profile parameters (rdisp/btctime) in batch.
I know that i can change this in Transaction RZ11 - but i must change it, depending on our
batchstrategy in the night.
best way for me - is to change it via batchprogram - with variant 'parameter' - 'value'.
thank you for help
best regards
L.Misof
R&S

Hi,
why don't you use the operation modes for increasing batch work processes in night ?
Thanks
Sunny

Dynamic profile parameters

Hi
I would like to get all the list of dynamic profile parameters at R/3 level.
Could anyone please let me know if there is any OSS note availabe which lists out all the dynamic parameters? I tried but,couldn`t find the related ones.
Is there any way to find out from R/3 level?
regards,
Vinodh.

Dear Vinod,
There is a table called TPFYPROPTY which lists you all the dynamically switchable parameters identified by dynamic indicator. you can view this table using transaction se16.
you can also get into Rz11 and check the dynamically switchable check box value for that corresponding parameter.
Reward points if useful.
Sree

Idoc/BAPI for Certificate Profile creation

Hi,
Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code QC01).
Appreciate your Inputs.
Thanks.
Regards,
Pc

BAPI_USER_PROFILES_ASSIGN Change User-Profile Assignments
SUSR_BAPI_USER_PROFILES_ASSIGN Methods of object USER
Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

WE20 - Partner profile Creation

Hi all
I am an FI consultant and working on task - generating the I docs for the Billing documents. We have configured the Out put determination for Billing documents.
I have to create the partner profile for the specified customer in WE20.
Do we have to maintain both Inbound and Out bound parameters?
Also please guide me what are the parameters i need to select for adding in both the cases for the Customer partner profile creation ?
Please let me know.
Thanks
Meenakshi

Hi
You need to work with Basis Consultant and as well as with ABAP Consultant
Settings for customer
You need create Partner Profiles, Partner Type, Agent ,
Outbound Parameters
Partner Role : BP, Message type:INVOIC, Message variant MM,
Outbound Options tab
Receiver Port: XXXXX
Pack. Size: 1
Output Mode
Select Transfer Idoc Immed- In general depends on your requirement
Idoc Type INV0IC01
Check the Check box for Cancel Processing After Syntax Error
Message Control Tab
Application V3
Message type: RD04
Process code : SD08
Settings for Vendor
Define Partner Type
Agent
Inbound Parmeters
Message type : INVOIC
Message Variant: xx
Inbound Options Tab
Process code : INVG
Check the check box Cancel Processing After Syntax Error
Processing by Functional Module
Trigger by background program
Select Trigger Immediately u2013 Ingeneral
These settings are needed
Regards
Odaiah Pelley

Arequest for a solution of profile creation

hello.I got an used Hp palm phone and its model is P102UNA I have selected the option Secure full erase in it,after that the mobile automatically shut down's itself.And when I turn it on it ask's me to create a new account or sign in to your account I created a new account and my mobile got activated and my mobile after somedays met with a trouble named virus and then once again I select the option of 'secure full erase' after that it automatically shut down's itself.And when I turn it on I do the same process but it tells me your profile creation is failed.kindly request for solution.

Read this:https://pivotce.com/2015/06/24/tip-how-to-bypass-activation/

Dynamic profiling not working

Hi, we've got installed AM+DS, and configured a subrealm with an external DS extended with AM schema, and dynamic profiling activated.
The fact is when we manually create a user on the subrealm thru AM console, it is created on the AM DS and also on the external DS, perfectly synchronized, and allowing users to access to their full user profile correctly.
But when the user is created only on the external DS, when a user logins it does not create automatically any user on the AM DS (it is supposed to be created, as dynamic profiling is activated). This causes users can login, but can't access their full user profile.
We want the users access to their user profile after login. We want administrators create users on the external DS, and not thru AM.
Any ideas?
JM

Unfortunately the implicit type conversion is going the other way.
SQL> CREATE TABLE testtab (id VARCHAR2(10));
Table created.
SQL> INSERT ALL
2 INTO testtab VALUES ('1')
3 INTO testtab VALUES ('banana')
4 SELECT * FROM dual;
2 rows created.
SQL> SELECT * FROM testtab WHERE id = '1';
ID
1
1 row selected.
SQL> SELECT * FROM testtab WHERE id = 1;
ERROR:
ORA-01722: invalid number
no rows selected
SQL> @xplan
Plan hash value: 2692415588
| Id | Operation         | Name    | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |         |     1 |     7 |     3   (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| TESTTAB |     1 |     7 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("ID")=1)

Dynamic Profile Creation

Similar Messages

Maybe you are looking for