Dynamic region table with binding problem

Hi. I'm using jdev 11.1.1.3 and ADF full stack.
My app uses single page approach with ADF libraries and a dynamic region to show content. Main page includes a menu bar which is created on session startup and is used to load task flows from libraries.
I have a class to provide some table functionality like CRUD, multi-row delete, etc and I need to reuse with every table included in libraries.
To do this, in main web app I have a managed bean to hold table binding and to provide this common functions to all fragments if needed.
I think it must be in request scope as fragment changes.
Here's the problem: when I navigate to a fragment which contains a table with binding, first time goes well,
but next time table, when fragment changes,new table displays without header or without data.
If I go to another fragment without binding and return to a fragment with problem, it displays well. With fragments without table binding, it works OK.
I've tried changing scope of this 'general' managed bean, but same thing. If I put a bean for each fragment, it works OK.
So, how can I 'share' this managed bean through every table? Any suggestions? is it possible?
Please, help me ....
Thanks,
DEMR.

I am seeing a similar problem in my app. I have a main menu that drives a dynamic region. If the task flow that gets displayed in the dynamic region also contains a dynamic region, when the inner dynamic region is refreshed to point to a second task flow, the page does not render correctly. The errors we have seen include data in tables not being displayed in some cases, and PPR errors in other cases. In both cases, if the inner dynamic region is replaced (by a single bounded task flow with navigation logic in a template, for example) the errors go away. There appears to be issues involved with including a dynamic region within a dynamic region.
Have you made any progress on solving your issue?

Similar Messages

Dynamic internal table with problem

Hi,
I have developed a program to update standard table. I am using dynamic internal table creation concept. But my dynamic internal table is having width only 1200 bytes. But many standard tables have more than that width. Do you have any input create dynamic internal table with more than 1200 bytes width..
Have a look at the error.
[http://3.bp.blogspot.com/_O5f8iAlgdNQ/SjYXTBpO92I/AAAAAAAAErI/Fs996_APHbE/s1600-h/error-792463.JPG|http://3.bp.blogspot.com/_O5f8iAlgdNQ/SjYXTBpO92I/AAAAAAAAErI/Fs996_APHbE/s1600-h/error-792463.JPG]
Expecting reply
Thanks
Venkat

Hi,
DATA: IT_TABSTRUC     TYPE STANDARD TABLE OF DFIES INITIAL SIZE 0,
        V_REF        TYPE REF TO DATA,
          V_I_AVL_CAT TYPE TABLE OF LVC_S_FCAT.
FIELD-SYMBOLS : <F_FS_DATA>   TYPE STANDARD TABLE.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001
NO INTERVALS.
PARAMETERS: P_TABNAM TYPE X_TABNAME.
SELECTION-SCREEN:END OF BLOCK B1.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      TABNAME        = p_tabnam
      LANGU          = SY-LANGU
    TABLES
      DFIES_TAB      = IT_TABSTRUC
    EXCEPTIONS
      NOT_FOUND      = 1
      INTERNAL_ERROR = 2
      OTHERS         = 3.
LOOP AT IT_TABSTRUC .
    V_LS_AVL_CAT-FIELDNAME = IT_TABSTRUC -FIELDNAME.
    V_LS_AVL_CAT-REF_TABLE = P_TABNAM.
    V_LS_AVL_CAT-REF_FIELD = IT_TABSTRUC -FIELDNAME.
    APPEND V_LS_AVL_CAT TO V_I_AVL_CAT.
ENDLOOP.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = V_I_AVL_CAT
    IMPORTING
      EP_TABLE        = V_REF.
ASSIGN V_REF->* TO <F_FS_DATA>.
FREE V_REF.
SELECT * FROM (P_TABNAM) INTO CORRESPONDING
          FIELDS OF TABLE <F_FS_DATA> .
Hope this resolves ur probs....

Create dynamic internal table with deep structure;cell coloring dynamic ALV

Hi,
My requirement is to do cell colouring for a dynamic ALV.
So I am creating a dynamic internal table using the following method.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_fieldcatalog[]
    IMPORTING
      ep_table        = i_output.
But how do I define field COLORS which should be again an internal table ?
Is there any other way for cell colouring?
Putting my problem in another way:
How do I create a dynamic internal table with one field as another internal table.
Quick replies are highly appreciated.
Thanks,
Nisha Vengal.

halo Nisha
Before building the display table . you can add the field in the feild catalog right . This display table gets generated from the field catalog right
1 Create a global structute say ZEXTEND_FIELDCAT
2 Have fields like STYLE type lvc_t_styl
                         COLOR type LVC_T_SCOL.
3 Now you have to extend ur fieldcatalog
l_fieldcat-fieldname = COLOR'.
l_fieldcat-ref_field = 'COLOR'.
l_fieldcat-ref_table = 'ZEXTEND_FIELDCAT'.
APPEND l_fieldcat TO lt_field_catalog.
CLEAR l_fieldcat.

Creating Dynamic Internal table with a dynamic name

Hi,
I want to create dynamic internal tables with dynamic names.
For example:
Suppose I have a table with three fields.
1. Structure name
2.Fields
3.file
And the structure of the internal table is as follows:
TYPES:BEGIN OF table_type,
      struct                  TYPE char70,
      fields                   TYPE tt_type OCCURS 0,
      File                      TYPE ttab_type OCCURS 0,
      END OF table_type.
Suppose I have one record inside my internal table with struct as "STRUCTURE", fields have an internal table content of set of fields and File has some set of records.
Now I want to create dynamic internal table whose name will be "STRUCTURE" , the fields of the dynamic internal table structure[] will be as in fields, and the records will be as in File.
Like this if i have 100 records in my internal table then I have to create 100 dynamic internal table dynamically.
Can anyone suggest how to do this?
Edited by: Jjammy on Jul 22, 2009 7:52 AM

Hi,
Check the sample program and develop your program accordingly.
<font color=blue><pre>
REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS:
      slis.
*Types
TYPES:
      ty_fcat      TYPE lvc_s_fcat,
      ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
      wa_fcat      TYPE ty_fcat,
      wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
      it_fcat      TYPE STANDARD TABLE OF ty_fcat,
      it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
      it_dyn_tab   TYPE REF TO data,
      wa_newline   TYPE REF TO data.
*Filed symbols
FIELD-SYMBOLS:
      <gt_table>   TYPE STANDARD TABLE,
      <fs_dyntable>,
      <fs_fldval> TYPE ANY,
      <l_field>    TYPE ANY.
*Variables
DATA:
      l_fieldname TYPE lvc_s_fcat-fieldname,
      l_tabname    TYPE lvc_s_fcat-tabname,
      l_fieldtext TYPE lvc_s_fcat-seltext,
      l_index      TYPE char2.
"Selection-screen
PARAMETERS:
         p_colms   TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
    DO p_colms TIMES.
      l_index = sy-index.
      CONCATENATE 'FIELD' l_index INTO l_fieldname.
      ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
      <l_field> = sy-index.
    ENDDO.
    INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_fcat INTO wa_fcat.
    PERFORM fieldcatalog1 USING: wa_fcat-fieldname
                                  wa_fcat-tabname
                                  wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = 'ZTEST_NOTEPAD'
      it_fieldcat        = it_fcatalog
    TABLES
      t_outtab           = <gt_table>.
*&      Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
         l_tabname,
         l_fieldtext,
         l_index.
DO p_colms TIMES.
    CLEAR l_index.
    l_index = sy-index.
    CONCATENATE 'FIELD' l_index INTO l_fieldname.
    CONCATENATE 'Field' l_index INTO l_fieldtext.
    l_tabname = '<GT_TABLE>'.
    PERFORM fieldcatalog USING: l_fieldname
                                l_tabname
                                l_fieldtext.
ENDDO.
ENDFORM.                    " BUILD_FIELDCAT
*&      Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fcat
    IMPORTING
      ep_table        = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM.                    " CREATE_DYNAMIC_TABLE
*&      Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname   = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " FIELDCATALOG
*&      Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname   = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM.                    " FIELDCATALOG1 </pre>
</font>
Thanks
Venkat.O

Dynamic internal table with repeated structure

Hi,
    I have a requirement, in which I need to create a dynamic internal table with the below structure.
   Dynamic Int. table structure: fld1 and fld2.
   If another internal table (say int2), contains 3 records, then my final output table should contain the below structure.
                Value 1              Value 2              Value3
     fld1     fld2     fld1     fld2     fld1     fld2
If in case, the int2 table contains 10 records, then my final output table should contain the structure below.
                Value 1              Value 2           .....              Value10
     fld1     fld2     fld1     fld2     .....     fld1     fld2
Please advice on how to acquire this. Thanks in advance for your help.
Regards,
Swetha.

You can do it...but it won't be table... it would be some thing like
itab
ref1-> strycture (field 1 field 2 field 3)
ref2-> structure (field1 field 4 )
ref3-> structure (field5 field7 )
say Define a internal table with a single field to hold a reference of Data
Go on creating Rows of different structures and storing the address into the table... you can use RTTS for same
Use the below link for RTTS (search on wiki for examples).
http://wiki.sdn.sap.com/wiki/display/ABAP/RuntimeTypeServices+%28RTTS%29

Problem with creating an dynamic internal table with only one field.

Hi,
i create an internal table like this:
FIELD-SYMBOLS: <GT_ITAB>      TYPE TABLE,
               <GS_ITAB>,
               <FS>.
DATA: GT_DATA TYPE REF TO DATA.
DATA: GS_DATA TYPE REF TO DATA.
DATA: TABNAME   LIKE DD03L-TABNAME.
DATA: FIELDNAME LIKE DD03L-FIELDNAME.
DATA: TBFDNAM   TYPE TBFDNAM VALUE 'LFA1-NAME1'.
SPLIT TBFDNAM AT '-' INTO TABNAME FIELDNAME.
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
ASSIGN GT_DATA->* TO <GT_ITAB>.
CREATE DATA GS_DATA LIKE LINE OF <GT_ITAB>.
ASSIGN GS_DATA->* TO <GS_ITAB>.
SELECT * FROM (TABNAME) INTO CORRESPONDING FIELDS OF TABLE <GT_ITAB>.
BREAK-POINT.
it works OK.
Now i want to create an internal table not like LFA1 but with LFA1-NAME1 Field TBFDNAM.
It's not only LFA1-NAME1 it shell be the value of TBFDNAM.
When i change
CREATE DATA GT_DATA TYPE TABLE OF (TABNAME).
to
CREATE DATA GT_DATA TYPE TABLE OF ( TBFDNAM).
i get an shortdump.
Any idea?
Regards, Dieter

Hi Dieter,
Your approach is ok, but it will create dynamic table without a structure of NAME1. Only the line type will be suitable (but field name will not exists -> hence the error in the select statement).
In this case you need to create a dynamic table which structure consists of one field named NAME1.
This code is the appropriate one:
" your definitions
DATA: tabname LIKE dd03l-tabname.
DATA: fieldname LIKE dd03l-fieldname.
DATA: tbfdnam TYPE tbfdnam VALUE 'LFA1-NAME1'.
FIELD-SYMBOLS <gt_itab> TYPE table.
"new ones
DATA: it_fcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA: gt_itab TYPE REF TO data.
" get table and fieldname
SPLIT tbfdnam AT '-' INTO tabname fieldname.
" create dynamic table with structure NAME1 (only one field)
it_fcat-fieldname = fieldname.
it_fcat-tabname = tabname.
APPEND it_fcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = it_fcat[]
IMPORTING
    ep_table                  = gt_itab
EXCEPTIONS
    generate_subpool_dir_full = 1
    OTHERS                    = 2.
CHECK sy-subrc = 0.
" dereference table
ASSIGN gt_itab->* TO <gt_itab>.
" insert data only to NAME1 field
SELECT * FROM (tabname) INTO CORRESPONDING FIELDS OF TABLE <gt_itab>.
I checked, this works fine:)
Regards
Marcin

Dynamic Table checkbox binding problem

I have a dynamically created table bound to a objectArrayDataProvider where all the columns have a check box. The thing is when I read the values in the objectArray it has the values as I loaded it. If a checkbox is changed in the table the objectArray dosn't get the change. How can I make this happen?
Thanks in advace.
Azeroth.

Hi There,
This should be of help to you
http://developers.sun.com/jscreator/reference/techart/2/checkbox_component.html
Thanks
K

Dynamic Region:VO with a view criteria does not filter data

Hi all,
I am using Jdeveloper 11.1.1.0
I have a page with two section: the first section contains a table, the second contains a region that changes depending on the row choosed in the table of the first table.
Starting from a VO a I have defined some view criterias and in my application module I have created some data control components based on that VO and those view criterias.
So, in my application module, I have a components for every view criteria defined in the VO.
In every fragments visualized in the dynamic region I have a table derived from a view object derived from view criterias defined before.
The problem is that in the fragment I always see all the data and not filtered data.
Instead, if I run my application module, in those view objects, I see the filtered data.
I have noted that (after dragging and dropping the component to the fragment) in the "Bindings" schede, in "Executable" editing myVOFilteredQuery, the field "Criteria" is empty.
Is this the problem? How have I to fill it?
Or the problem is another?
Thank you so much
Andrea

This issue is fixed.
Thanks and Regards
Sameer

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IT_OUTPUT2[]
    IMPORTING
      EP_TABLE        = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
       TABNAME
       FIELDNAME
       DATATYPE
       LENG
       INTTYPE
       ROLLNAME
       DECIMALS
       REFTABLE
       REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
       TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
       ENDIF.
   IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
       TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
       TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
       TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
       TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
       TABLEFIELD-INTLEN      = IT_DD03L-LENG.
       TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
       TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
       TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
       TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
       TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
      ls_dd03l type dd03l,
      lt_fldcat TYPE lvc_t_fcat,
      ls_fldcat TYPE lvc_s_fcat,
      ls_where(72) TYPE c,
      lt_where LIKE TABLE OF ls_where,
      lt_fld LIKE TABLE OF ls_where,
      lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
    where tabname = 'VBAK'
      and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
    clear ls_where.
    concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
    append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog           = lt_fldcat
      IMPORTING
        ep_table                  = lt_data_dy
      EXCEPTIONS
        generate_subpool_dir_full = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      RAISE no_configuration_data.
    ENDIF.
    ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
    <ft_data>
    where (lt_where).
Thanks
Bala

WD4A Dynamic ALV Table with dynamic tables

Hi all,
first I want give you the information what I try to do.
I have an another WD4A application for administrative use in which I can assign certain tablefields to a certain user. You can say it's something like a customizing application.
In the next application (with my issues) I will display the tables for the user, but these tables are not the complete table.
I have a node in my context of the component controller which is bound to my ALV. I add during the runtime attributes to my node.
* .... coding ....declaration
* get the node
lr_node = wd_context->get_child_node( 'M_TABLE' ).
lr_node_info ?= lr_node->get_node_info( ).
* remove the attributes, if exists
lr_node_info->remove_dynamic_attributes( ).
* .... coding ....
*   add attributes
    LOOP AT l_t_m_table INTO l_s_m_table.
      CLEAR ls_attribute.
*     name of the attribute
      MOVE l_s_m_table-NAME TO ls_attribute-NAME.
*     DDIC type of the attribute
      MOVE l_s_m_table-TYPE_NAME TO ls_attribute-TYPE_NAME.
*     If the DDIC has a gen namespace like /B135/ replace the / with _
      REPLACE ALL OCCURRENCES OF '/' IN ls_attribute-NAME WITH '_'.
*     add the attribute
      lr_node_info->add_attribute( EXPORTING
                                     attribute_info = ls_attribute ).
    ENDLOOP.
This coding works fine I get the columns in my ALV. Then I tried to fill my ALV table with data from a database table.
I created dynamicly an internal table with the following coding:
*   Create dynamic table
    CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
      EXPORTING
        IT_FIELDCATALOG = l_t_FLDCAT
      IMPORTING
        EP_TABLE = l_t_NEW_M_TABLE.
*   assign the table
    ASSIGN l_t_NEW_M_TABLE->* TO <M_TABLE>.
*   structure of table
    CREATE DATA l_s_NEW_M_TABLE LIKE LINE OF <M_TABLE>.
    ASSIGN l_s_NEW_M_TABLE->* TO <l_s_m_table>.
* get data from database
SELECT * FROM (l_m_table) INTO CORRESPONDING FIELDS OF TABLE <M_table> WHERE OBJVERS = 'A'.
With this coding I get the data from the database and only the required fields that means I have e.g. an itab with columns1, columns3, columns4 from the database.
I also added e.g. these columns (columns1, columns3, columns4 from the database) to the node as attribute. Now it should be possible to bind the table to the structure with this coding:
lr_comp_usage_m = wd_this->wd_cpuse_usage_alv_M_table( ).
*   create component if not active
    IF lr_comp_usage_m->has_active_component( ) IS INITIAL.
      lr_comp_usage_m->create_component( ).
    else.
* set data if node exists
      l_ref_interfacecontroller = wd_this->wd_cpifc_usage_alv_M_table( ).
      l_ref_interfacecontroller->set_data( lr_node ).
    endif.
*   bind table
    lr_node->bind_table( <M_TABLE> ).
Now, I get an error, which is caused by the table binding.
In ST22 I get:
Short text
    Line types of an internal table and a work area not compatible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_CONTEXT_NODE_VAL=======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The statement
       "INSERT wa INTO TABLE itab"
    requires the lines of the internal table "TABLE" and the
    work area " wa" to be compatible. Compatibility means
    equivalence in the context of ABAP/4 type checking.
    In this case, the condition is not satisfied because the internal table
    "TABLE" has the line type "u" and the length 28, but the work area " wa"
    has the type "C" and the length 2.
    (If the work area " wa" is the header line of the internal
    table "TABLE", the above inconsistency can arise if an internal
    table t with the line type T1 is passed to a subroutine (FORM or
    FUNCTION) as an actual parameter and the corresponding formal
    parameter p is declared in the subroutine by "TABLES p STRUCTURE T2".
    If then T1 and T2 are incompatible, the header line p
    has the type T2 (specifed by STRUCTURE), but the internal
    table p has the line type T1 (passed from the actual parameter)).
Source Code Extract
Line SourceCde
    1 method if_wd_context_node~get_static_attributes_table .
    2
    3   field-symbols:
    4     <element> like line of me->collection,
    5     <static_attributes> type data,
    6     <table> type index table.
    7
    8 * check whether elements are supllied or not
    9   if me->elements_supplied = abap_false.
   10     me->supply_elements( ).
   11   endif.
   12
   13   clear table.
   14
   15   if me->table_ref is not initial.
   16     assign me->table_ref->* to <table>.
   17     table = <table>.
   18   else.
   19     loop at me->collection assigning <element> from from to to.
   20       assign <element>->static_attributes->* to <static_attributes>.
error in line 21       insert <static_attributes> into table table.
   22     endloop.
   23   endif.
   24
   25 endmethod.
Any suggestions? Is it allowed to use bind_table() with a field symbol?
Another strange thing is that if I try the same with static itab and attributes during runtime it works, but only if the fields of the itab has the same name as the attributes, which means that I can not use itabs with fieldnames like /BI0/S_CUSTOMER and if I can not use them it's difficult to read data from database with SELECT * FROM ... INTO CORRESPONDING FIELDS OF TABLE itab.
Thanks in advance for your suggestions!
Best Regards,
Marcel

Hi Francois,
I solve it with the RTTI and the method
lr_node_info = lr_node_info->add_new_child_node(
                      name = 'Dynamic_TABLE'
                      IS_MANDATORY = ABAP_false
                      IS_MULTIPLE = ABAP_true
                      STATIC_ELEMENT_RTTI = lr_struct_descr
                      IS_STATIC = ABAP_false
I don't know why it doesn't work with adding attributes and binding the table after adding the attributes.
Anyway thanks for your help.
Best Regards,
Marcel

Dynamic Region in Popup - clientListener problem?

Hello,
I'm working in Jdeveloper 11.1.1.2, following the popup/region pattern found at: http://www.oracle.com/technology/products/adf/patterns/11/popupregionpattern.pdf to have a dynamic region in a popup. I already have a working implementation on one of my pages, but the exact same implementation on another page is giving me issues. Whenever I add an af:clientListener component to my popup, the table in the same panelCollection stops rendering its rows. The column headers display, but there's no text of any type in the rows. If I delete the af:clientListener, my page works perfectly.
Here's my popup code thus far:
<af:popup id="awdPU" contentDelivery="lazyUncached"
launcherVar="source" eventContext="launcher">
<af:setPropertyListener from="#{source.attributes.saId}"
to="#{pageFlowScope.currentSaId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.saId}"
to="#{pageFlowScope.currentSchlrId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.appId}"
to="#{pageFlowScope.currentAppId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.aidYear}"
to="#{pageFlowScope.currentAidYearId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.theAction}"
to="#{pageFlowScope.currentAction}"
type="popupFetch"/>
<af:setPropertyListener from="#{viewScope.popupDynamicRegionBean.popupTaskFlowId}"
to="#{viewScope.popupDynamicRegionBean.dynamicTaskFlowId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.orgId}"
to="#{pageFlowScope.currentOrgId}"
type="popupFetch"/>
<af:panelWindow id="pw1" title="Awarding">
<af:region value="#{bindings.dynamicRegion1.regionModel}"
id="dynam1"
regionNavigationListener="#{viewScope.popupDynamicRegionBean.regionNavigated}"/>
</af:panelWindow>
<af:serverListener type="serverPopupClosed"
method="#{viewScope.popupDynamicRegionBean.swapEmptyTaskFlow}"/>
<af:clientListener method="popupClosedListener"
type="popupClosed"/>
</af:popup>
and here is my working, completed dynamic region + popup code:
<af:popup id="awdPU" contentDelivery="lazyUncached" launcherVar="source"
eventContext="launcher">
<af:panelWindow id="window" title="Awarding" modal="true" closeIconVisible="false">
<af:region value="#{bindings.dynamicRegion1.regionModel}" id="dynam1"
regionNavigationListener="#{viewScope.popupDynamicRegionBean.regionNavigated}"
inlineStyle="background-color:transparent;"/>
</af:panelWindow>
<af:setPropertyListener from="#{viewScope.popupDynamicRegionBean.popupTaskFlowId}"
to="#{viewScope.popupDynamicRegionBean.dynamicTaskFlowId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.saId}" to="#{pageFlowScope.currentSaId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.appId}" to="#{pageFlowScope.currentAppId}"
type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.aidYear}"
to="#{pageFlowScope.currentAidYear}" type="popupFetch"/>
<af:setPropertyListener from="#{source.attributes.theAction}"
to="#{pageFlowScope.currentAction}" type="popupFetch"/>
<af:clientListener method="popupClosedListener" type="popupClosed"/>
<af:serverListener type="serverPopupClosed"
method="#{viewScope.popupDynamicRegionBean.swapEmptyTaskFlow}"/>
<af:clientAttribute name="action" value="makeAward"/>
<af:clientListener method="adjustPopupSize" type="popupOpening"/>
</af:popup>
Does anyone know of any reason a client listener would have this kind of impact on my page? I've tried other types/methods and it just seems like if an af:clientListener is there, it won't work.
Thanks!

Hi,
I came across this type of problem. what the javascript method u r calling it may contain some errors or if the clientListner not able to find the method which u r calling in the jspx file that will behave like that only.
keep one alert begining of the script method(popupClosedListener) and check it whether it is calling or not. Better related serverListner should be after the ClientListner.
Reg,
Brahma...

Filling dynamic internal table with data from other internal table

Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best Regards

Hi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji

Creating dynamic internal table with deep structure

Hi all,
I need to create an internal table with deep structure dynamically. I've already created tables with method 'create_dynamic_table' but I'm struggling with the deep structure.
I would need an internal table with the following structure:
DATA: BEGIN OF lt_t1,
s1 TYPE REF TO data,
s2 TYPE REF TO data,
END OF lt_t1.
S1 and S2 have to be tables.
It might be possible with RTTS but all the examples in the forums (that I've found so far) are related to at least one DDIC-structure. And that's my problem because both tables are created during runtime.
Thank you in advance
Nicola

Hi Frédéric,
I hope my english is good enough to explain it correctly:
We use a function builder for SEM-BPS which copies data from one Cube to another. This Cube is transactional, so you can't easily read a structure out of DDIC.
The export parameter of this function builder is a table with type 'any table'.
Until today we used a fixed definition e.g.:
TYPES:
    BEGIN OF xtyp_chas,
     /sie/sr_ocomp TYPE /b52/oisr_ocomp,
     /sie/ts_03psp TYPE /b52/oits_03psp,
     0activity     TYPE /bi0/oiactivity,
     0acty_elemt   TYPE /bi0/oiacty_elemt,
     0costelmnt    TYPE /bi0/oicostelmnt,
     0co_area      TYPE /bi0/oico_area,
     0creditor     TYPE /bi0/oicreditor,
     0currency     TYPE /bi0/oicurrency,
     0curtype      TYPE /bi0/oicurtype,
     0db_cr_ind    TYPE /bi0/oidb_cr_ind,
     0fiscper      TYPE /bi0/oifiscper,
     0fiscper3     TYPE /bi0/oifiscper3,
     0fiscyear     TYPE /bi0/oifiscyear,
     0metype       TYPE /bi0/oimetype,
     0network      TYPE /bi0/oinetwork,
     0part_actty   TYPE /bi0/oipart_actty,
     0part_cctr    TYPE /bi0/oipart_cctr,
     0piobjsv      TYPE /bi0/oipiobjsv,
     0project      TYPE /bi0/oiproject,
     0unit         TYPE /bi0/oiunit,
     0vtdetail     TYPE /bi0/oivtdetail,
     0vtstat       TYPE /bi0/oivtstat,
     0vtype        TYPE /bi0/oivtype,
     0bus_area     TYPE /bi0/oibus_area,
     0cashdetail   TYPE /bi0/oicashdetail,
     0cashtype     TYPE /bi0/oicashtype,
     0comp_code    TYPE /bi0/oicomp_code,
     0coorder      TYPE /bi0/oicoorder,
     0cs_dimen     TYPE /bi0/oics_dimen,
     0cs_unit      TYPE /bi0/oics_unit,
     0int_bus      TYPE /bi0/oiint_bus,
     0part_abcpr   TYPE /bi0/oipart_abcpr,
     0part_coord   TYPE /bi0/oipart_coord,
     0part_wbsel   TYPE /bi0/oipart_wbsel,
     0piovalue     TYPE /bi0/oipiovalue,
     0profit_ctr   TYPE /bi0/oiprofit_ctr,
     0ps_obj       TYPE /bi0/oips_obj,
     0statussys0   TYPE /bi0/oistatussys0,
     zfbwheroj     TYPE /bic/oizfbwheroj,
    END   OF xtyp_chas,
    BEGIN OF xtyp_kyfs,
      0amount      TYPE /bi0/oiamount,
      0quantity    TYPE /bi0/oiquantity,
      zf03oaws     TYPE /bic/oizf03oaws,
      zf03oqty     TYPE /bic/oizf03oqty,
      zf03ozsta    TYPE /bic/oizf03ozsta,
    END OF xtyp_kyfs,
    BEGIN OF xtyp_zf03g003,
      s_chas TYPE xtyp_chas,
      s_kyfs TYPE xtyp_kyfs,
    END   OF xtyp_zf03g003,
    xtyp_zf03g003_t TYPE HASHED TABLE OF xtyp_zf03g003
                      WITH UNIQUE KEY s_chas.
DATA: lt_ibm_data TYPE xtyp_zf03g003_t,
      ls_ibm_data TYPE xtyp_zf03g003.
So one table (s_chas) contains the characteristics of the Cube and the other (s_kyfs) contains the keyfigures. That's exactly the format we need for the export parameter. At the end of the program, we use the following coding to fill the export table (eto_chas):
loop at lt_ibm_data into ls_ibm_data.
collect ls_ibm_data-s_chas into eto_chas.
endloop.
So in this moment I give this table the structure that is needed to move the data into the cube. I can't change the requirement because it is a standard interface.
I would like to change that coding to be dynamically. Because if somebody changes a charasteristic or a keyfigure in the cube, we would have to change the function builder too. I don't think that the SEM-BPS department will let us know every time they've changed something anyway.
So I hope that my explanation wasn't too confusing
Nicola

How to create Dynamic internal table with columns also created dynamically.

Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
Nara

I don't understand ...
something like that ?
*   Form P_MODIFY_HEADER.                                              *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
         v_count(2)      type n ,
         v_date          type d ,
         v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
          is_fieldcatalog-fieldname+0(3) eq 'VAL' .
    move : is_fieldcatalog-fieldname+3(2) to v_count ,
           p_perb2+5(2)                   to v_date+4(2) ,
           p_perb2+0(4)                   to v_date+0(4) ,
           '01'                           to v_date+6(2) .
    v_count = v_count - 1.
    call function 'RE_ADD_MONTH_TO_DATE'
        exporting
          months        = v_count
          olddate       = v_date
        importing
          newdate       = v_date.
    if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
      concatenate 'Quantité 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    else.
      concatenate 'Montant 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    endif.
    move : v_buff to is_fieldcatalog-scrtext_s ,
           v_buff to is_fieldcatalog-scrtext_m ,
           v_buff to is_fieldcatalog-scrtext_l ,
           v_buff to is_fieldcatalog-reptext .
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform.                     " P_MODIFY_HEADER

Import of Tables with CLOB problem.

Hi,
I am having problems with the import of tables with CLOB columns.
Tables with CLOB columns will force the use of the tablespace in which it (table) was created originally. It will not be created on the new schema's default tablespace. Is there a way to get around this problem?
More on this problem can be found here :
Re: Import error 1647, CLOB fields problem, need help!
I am using Oracle 9.2.0.6 standard edition, that is why the transportable tablespace option will not work.
Thanx
Rob

Sorry I have posted the wrong link, it should be:
Re: Import error 1647, CLOB fields problem, need help!
Regards
Rob

Dynamic region table with binding problem

Similar Messages

Maybe you are looking for