Dynamic schema validation and validation error consolidation

I have a case where there are 18 schemas against which I need to validate my payload. After validation if there is any errors in that then I want a list of elements where it got failed. I want to know is that possible in BPEL?

Hi there,
Couldn't get what exactly your requirement is for.
But I believe your requirement is some where in line with this post:
https://forums.oracle.com/thread/423576
Hope using the choice element and creating a unique xsd will suffice your requirement.
Regards,
Deepak.

Similar Messages

How do I display line numbers? I am using the International Digital Publishing Forum EPUB Validator and the error messages refer to line numbers. Thanks, Earl

The validator gives me error messages messages that refer to line numbers and positions - very unhelpful. I need to be able to display the line numbers in the reader to find the places where the errors are. Can anybody point me in the right direction? MUch appreciated. Earl

Adobe Reader can't display epub files. Adobe Reader can't display line numbers.

Editable alv: add custom validation and display "errors" in protocol list

Hi,
What I want to do:
PAI validation of editable alv with displaying error's in the protocol list by adding custom entries to the existing protocol object.
What is my problem:
After registering "data_changed event", the protocol list don't appear.
My understanding is, that the object "er_data_changed" is passed by the event "data_changed"
an so I thought I can add some more entries to the protocol list.
After "de-registering" the "data_changed" event, the protocol appears with the standard errros messages (e.g. "input to numeric" by enter charachters)
One more hint:
By creating a new object "er_data_changed" in the handler method the protocol list works, but I would like to append entries to the object that was passed with the event.
Probably I've misunderstand something, please help !
My coding:
PAI:
trigger event "data_changed" -> calls handler method
CALL METHOD r_myalv->check_changed_data
    IMPORTING
      e_valid = is_valid.
stop processing
IF is_valid NE 'X'.
    MESSAGE 'invalid input' TYPE 'E' .
ENDIF.
handler method:
handle_data_changed FOR EVENT data_changed OF cl_gui_alv_grid IMPORTING e_ucomm
                                                                                er_data_changed.
METHOD handle_data_changed.
    data: ls_mod_cell type lvc_s_modi.
     CALL METHOD er_data_changed->add_protocol_entry
                EXPORTING
                       i_msgid     = 'SU'
                       i_msgty     = 'E'
                       i_msgno     = '000'
                       i_msgv1     = 'This is a test !'
                       i_fieldname = ls_mod_cell-fieldname.
     er_data_changed->refresh_protocol( ).
     er_data_changed->DISPLAY_PROTOCOL( ).
ENDMETHOD.                    "handle_data_changed

Dear Olaf,
    If understood correctly, you want to Edit an ALV and do some data validations when some data is changed in an ALV.   To do this follow the following steps:
1.   Before displaying ALV, Register the edit event.
* Set cell modified to trigger data_changed
CALL METHOD go_alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
2. Register the event DATA_CHANGED of class CL_GUI_ALV_GRID & handle the event.
SET HANDLER lo_event_receiver->handle_data_changed FOR go_alv_grid.
The event DATA_CHANGED of class CL_GUI_ALV_GRID has a parameter ER_DATA_CHANGED which is of type CL_ALV_CHANGED_DATA_PROTOCOL.
This er_data_changed has internal table MT_MOD_CELLS(contains index of records changed ) & MP_MOD_ROWS(contains the changed row), using these update your internal table accordingly.
DATA : wa_mod_cell TYPE lvc_s_modi.
FIELD-SYMBOLS: <fs> TYPE table.
LOOP AT er_data_changed->mt_mod_cells INTO wa_mod_cell.
ASSIGN er_data_changed->mp_mod_rows->* TO <fs>.
READ TABLE <fs> INTO wa_output INDEX wa_mod_cell-tabix.
MODIFY lt_output FROM wa_output INDEX wa_mod_cell-row_id.
ENDLOOP.
3.   Here it self you can do the required data validations(No need of any PAI modules) as below.
IF wa_orders-zfstfirmtyp = c_9.
MESSAGE s288(zcsp).
DELETE er_data_changed->mt_mod_cells.
EXIT.
ENDIF.
Regards
Kesava

Dynamically calculating values and validating in reports

Hi
I need to be able to calculate and display the running total of column (representing a % - sales allocation) within an updatable report as the users steps off the row after making a change to the allocation.
Greatful for your suggestions on ways of doing this.
Thanks
Dorian

See
http://htmldb.oracle.com/pls/otn/f?p=24317:57
The region query is
select
ename,
job,
htmldb_item.text(1,sal,null,null,'onChange="Calc()"') sal,
htmldb_item.text(2,comm,null,null,'onChange="Calc()"') comm,
htmldb_item.text(3,sal+comm,null,null,'readonly=true') total
from emp
The Calc javascript function is in the Region header as
<script type="text/javascript">
function Calc() {
var sal=document.wwv_flow.f01;
var comm=document.wwv_flow.f02;
var total=document.wwv_flow.f03;
for (var j=0;j<sal.length;j++) {
total[j].value=Number(sal[j].value)+Number(comm[j].value);
</script>Note that you dont have access to each individual row, when you change either the sal or the comm field, the entire grid gets recalculated, sort of like a spreadsheet.
Should be enough to get you started.
Hope this helps.

Spry validation and validating email address?

I've seen that spry can be used to validate forms. I have not
seen an
example of an email address or more complicated validating
being done.
Where's a good source for how to do this?

Validating email addresses is not entirely possible. You can
only validate
the SYNTAX of an email address. This is best done server side
rather than
client side (or perhaps both ways) since validating only
client side can be
defeated by simply disabling javascript.
I like the Spry validation, though, because it is EXTREMELY
flexible and
easy to use. David Powers has some very good discussions
about Spry in his
Dreamweaver CS3 with CSS. Ajax, and PHP book, as does David
McFarland in his
Dreamweaver CS3: The Missing Manual.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Art" <lee_nospam_@nospam_artjunky.com> wrote in
message
news:fe5uke$pu7$[email protected]..
> I've seen that spry can be used to validate forms. I
have not seen an
> example of an email address or more complicated
validating being done.
>
> Where's a good source for how to do this?

Custom Validations and Error Handling

Hi
I have a requirement that I have to use the custom validation and the errors and/or exceptions should display in the page. All the errors needs to be displayed in the page at the same time.
Suppose If i have two fields like...1)First Name and 2) BirthDate ...both are required fields. If user does not enter any values for both the fields, the errors should display in the page like 'First Name is required! Save Failed' /n
'Float the mouse cursr over the red arrows to see the filed serror mesg'. So all the errors in JSF page should be recorded and displayed when user mouse over taht particular component.
I am new to JSF. Can you please anybody tell me what is best way to implement this in JSF?

We should not use the JSF built-in validation framework and desiging the custom validation. For that we are writing the validate() method in BackingBean.
My Requirement is as follows...
Capture all the errors in JSF page and display the same JSF page with all the errors.
For example: If I have 5 fields in form, and 3 fields out of it fails in validation ...we need to show the page with all the fields and some kind of Red border and arrow on the fileds that are failed in validation.
Also in the bottom of the page we need to display the first field error mesg .....
-- Suppose say First Name, Last Name, DOB, Gender, Field5 are the fields and only Last Name, DOB and field5 are failed in validation...
Then we have to display in the botton of the page **{color:#ff0000}'Last Name is required! Save Failed{color}**' along with this,
We need to display the mesg *{color:#ff0000}''Float the mouse cursor over the red arrows to see the filed error mesg'{color}*. -> This means we are dislaying the page with red arrows on the fileds that are failed in validation.
So when user mouse over in the arrow...we should display the error message for that particular field.

JSF1.2 and validation

Hi,
I am a newbie to JSF, but I noticed (based on the book I am going though) that validation and validation messages are much better handled in 1.2, in comparison to 1.1. For example, you now get:
Amount: Validation Error: Value is required.
Instead of simply just an error. Assuming, of course, you set up a label. However, when I attach my own validation function, this does not happen. This leads me to the conclusion that either my validation classes need to do something before I can access this functionality or the common validation functions/convertors are poorly designed and are concatenating the label/field name. So my question is how do I get the message to print the label for my validation function?
Thanks.

Not too sure I want to override every possible error message that can come from the standard validators. What I want is a little explanation. What decides that the message is going to stick a label into the validation message. If it is the validator/convertor then, in my opinion, this is bad design. This is something that the message or messages component should do, not the convertor/validator.
In fact, that is what I want to do. By what you are suggesting, it seems the only way is to override that message so it does not put the field name in is to override the messages.

How to validate VO result and display error message?

Hi,
I have created 2 pages:
Page 1: User to enter employee number and click 'Go' button to search (redirect to Page 2)
Page 2: To display employee details
In situation where employee is suspended, employee detail will be display as blank in Page 2.
At the same time, we would like to display error message which inform user to refer to HR Department for this scenario.
Need guidance on how to perform the validation and display error message.
Thanks and Regards,
Shiau Chin

Hi Shiau,
In this case instead of redirecting to next page, throw an exception on the same page.
If you want redirect it to next page then while redirecting it to next page pass some info that can indicate that employee is suspended, get this value in Process request if it has value then throw exception else query details.
Regards,
Reetesh Sharma

ALSB 2.6 Dynamic Schema Validation

ALSB 2.6 has a validation stage (Schema or WSDL), but requires a type to be selected during development. It would be nice if a WSDL based proxy could recognize the correct input message on an operational branch and dynamically choose the correct validation type.
However, I have not been able to find anything to allow dynamic validation and thus a WSDL based proxy that has multiple operations requires the validation stage and error handling implementation to be repeated many times. Is there a better way?

you can use if condition and choose the validation based on that condition whether its is aganst xsd/wsdl

Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"

I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.

I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter

Validating XML files and generating error codes

I want to validate an XML file with a schema & also get hold of the fields/attributes/tags
that caused an error and generate error codes based on that. Any suggestion on
how this can be done. DOM, SAX allow to do validation but how do I know exactly
know which tags caused errors. We have to track the errors codes.

"SP" <[email protected]> wrote:
Use the HandlerBase class for getting hold of the tags and its attributes.
The methods in this class take the tags and attributes and throw the
SAXException. You can use these methods to find out which tag is throwing
an
exception.
Hope this helps
SP
I am using the DOMParser.parse method with the xerces parser. I have an error
handler registered to get hold of the errros. What happens is the parsing stops
at the first instance of an error. I want to continue parsing to get hold of all
errors. How can I achieve that?
>
"leena" <[email protected]> wrote in message
news:[email protected]..
I want to validate an XML file with a schema & also get hold of thefields/attributes/tags
that caused an error and generate error codes based on that. Anysuggestion on
how this can be done. DOM, SAX allow to do validation but how do Iknow
exactly
know which tags caused errors. We have to track the errors codes.

Validation and Error Message Dialog Box

hi,
I created 2 items DateFrom and DateTo.....when User enter dates into these items I need validate these dates i.e DateTo should be greater than DateFrom
if it is not so,,,,I need to Popup a Error message in Dialog Box.........
and this Error should not terminate the Program.
Thanks in Advanced
regards,
Radhika

Radhika,
You need to attach PPR event to the Date To column. In the event code in controller, you can validate do the validation and accordingly throw error on the page.
Why do you need a pop up(javascript alert) for that?
--Mukul

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Ple

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Please re-install the software... I have no idea where my software is... That was many many years ago? HELP!!

When you go to the download page, you must do two things:
Download this file: PhSp_CS2_English.exe on the download page.
Use the serial number on the download page in order to install your non-activation copy.
Do not use your old CD or serial number. It no longer works.
If you have Windows 7, the advice is to turn off UAC and run the installer as Administrator.
Gene

Sometimes when firefox loads a web page the error message comes up stating The URL is not valid and cannot be loaded. And I know this is a valid web site. What gives?

This happens very often. When I open Mozilla sometimes I get an error stating that "The URL is not valid and cannot be loaded." When I click ok the site stops loading and the tab is titled untiled.

This can be a problem with DDE.<br />
See http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Dynamic schema validation and validation error consolidation

Similar Messages

Maybe you are looking for