Dynamic Search-help in Selection Screen Parameter
Hi,
Please can you provide some solution for the below requirements.
I have 2 fields ( Organization channel and Team ) in my selection screen. Under one organization channel there can be many teams.
And I am trying a dynamic search help on both the fields using event AT selection-screen on Value request and
FM 'F4IF_INT_TABLE_VALUE_REQUEST'.
But I am facing the below issue .
First I am giving some values in field 'Organization channel' . Then I am clicking on F4 button on my 2nd field 'Team' .
and in debugging mode under the event 'At selection-screen on value request', Select option SO_Team is blank.
The value provided in the Organiozation channel is not being captured in SO_TEAM-Low
Please have a look on the below codes.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_team-low .
if not so_orgchannel-low is initial. "Here so_orgchannel-low value is coming as Zeros.
select * from HRP1001 into table GT_HRP1001
where objid = so_orgchannel-low.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ORGID'
value_org = 'S'
dynpprog = 'ZTEST'
dynpnr = '1000'
TABLES
value_tab = gt_hrp1001
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
Hi,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_team-low .
"Add This Begin
CLEAR t_dynpfields.
REFRESH t_dynpfields.
t_dynpfields-fieldname = 'SO_ORGCHANNEL-LOW'.
APPEND t_dynpfields.
w_repid = sy-repid.
* reading Screen variables and Values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = w_repid
dynumb = sy-dynnr
TABLES
dynpfields = t_dynpfields
EXCEPTIONS
OTHERS.
READ TABLE t_dynpfields INDEX 1.
so_orgchannel-low = t_dynpfields-fieldvalue.
"Add this End
if not so_orgchannel-low is initial. "Your code is here
select * from HRP1001 into table GT_HRP1001
where objid = so_orgchannel-low.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ORGID'
value_org = 'S'
dynpprog = 'ZTEST'
dynpnr = '1000'
TABLES
value_tab = gt_hrp1001
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
Regards,
Prabhudas
Similar Messages
-
Search help in selection screens for interactive report
A search help can only be assigned to DB table.
So my doubt is can it also be used for seletion screens created for an interactive report?
If yes what is the procedure.. Please give me one example at least...
waiting for your valuable suggestions.....
Thanks,
regards,
ChinmayHi Chinmay,
I suppose your requirement is to give search help to selection screen elements.
Here is the code.
REPORT ZSHAIL_F4HELP .
parameters: name(10) type c .
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
dATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
at selection-screen on value-request for name.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'DEMOF4HELP'
fieldname = 'CARRIER1'
SEARCHHELP = ' '
SHLPPARAM = ' '
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
I hope your query is solved.
If so,please award points.
Regards,
Sylendra. -
Regarding Search help on selection-screen field
Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-TulasiHi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah -
Adding f4-help to selection screen parameter field
Hi all.
I need to add search help to a parameter field on selection screen:
PARAMETERS:
p_reciv LIKE soos7-recnam.
What is the easiest way?
tia, regardsYou can give F4 help by two ways:
1. Using internal table
2. Refering db table field.
Following are e.gs:
F4 help using internal table example:
DATA: BEGIN OF LI_FABGRP OCCURS 0,
FABGRP LIKE ZAPO_FABGRP-FABGRP,
BEGDA LIKE ZAPO_FABGRP-BEGDA,
END OF LI_FABGRP.
DATA : T_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE,
L_RETFIELD TYPE DFIES-FIELDNAME.
parameters : S_FABGR like ZAPO_FABGRP-FABGRP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
SELECT FABGRP BEGDA FROM ZAPO_FABGRP INTO table LI_FABGRP.
SORT LI_FABGRP BY FABGRP ASCENDING BEGDA DESCENDING.
Henter de mulige fabriksgrupper med nyeste BEGDA *indenfor hver
DELETE ADJACENT DUPLICATES FROM LI_FABGRP COMPARING FABGRP.
L_RETFIELD = 'FABGRP'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = L_RETFIELD
DYNPPROG = SY-REPID
DYNPNR = '1000'
DYNPROFIELD = 'S_FABGR'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
TABLES
VALUE_TAB = LI_FABGRP
RETURN_TAB = T_RETURN
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
F4 help using field example:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = mara
fieldname = matnr
SEARCHHELP = ' '
SHLPPARAM = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
Select-options: s_rcode FOR g_grund . "Reason code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_rcode-low.
Validation for Reasoncode
PERFORM sub_get_F4_rcodehelp .
FORM sub_get_f4_rcodehelp .
STRUCTURES Declarations
TYPES: BEGIN OF ty_rcode ,
grund TYPE mb_grbew,
grtxt TYPE grtxt,
END OF ty_rcode.
*Internal Table declaration
DATA : li_rcode TYPE STANDARD TABLE OF ty_rcode WITH HEADER LINE.
SELECT grund grtxt
INTO TABLE li_rcode
FROM t157e
WHERE spras = sy-langu .
*Help functions for external use
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'fieldname'
dynpprog = 'programname
dynpnr = '1000'
dynprofield = 'S_PCODE'
value_org = 'S'
TABLES
value_tab = li_rcode
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_get_F4_rcodehelp -
Need help on search help on selection screen field
Hi guyz,
Please tell me how to pass the parameter or restrict the below search help.
*s_bsart FOR ekko-bsart . " Doc. Type*
For the above selection screen field i need to display the data only for cat = F if i click search help.
Thanks,
Mohamed KaleelHi,
Use At selection-screen for value-request for s_bsart.
SELECT_OTPIONS: s_bsart FOR ekko-bsart.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bsart.
CALL SCREEN 100 STARTING AT 10 5
ENDING AT 50 10.
MODULE value_list OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS space.
NEW-PAGE NO-TITLE.
s_bsart-low = 'F' / 'CAT=F'.
write :/ s_bsart-low.
Hide: s_bsart-low
clear s_bsart-low.
ENDMODULE.
AT LINE-SELECTION.
LEAVE TO SCREEN 0.
This will resolve the issue.
Regards,
Gurpreet -
Search help for selection screen field
Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vindhi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
select single butxt into butxt
from t001
where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = 'T001'
fieldname = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
tables
return_tab = return
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
from t001
where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = dynfields
exceptions
others = 8.
start-of-selection.
rgsds
anver
if hlped mark points -
Search Help for selection screen select-option
Hi Friends,
I want have search help for KSCHL with only the condition types starting with Z. I need your help to do that.
Thanks in Advance.hi,
chek a sample code, for restricting the serach help.
REPORT Z_CONECT_A.
Include type pool SSCR
TYPE-POOLS sscr.
TABLES : marc.
defining the selection-screen
select-options :
s_matnr for marc-matnr,
s_werks for marc-werks.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
*** type sscr_***.
INITIALIZATION.
Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = restrict
EXCEPTIONS
TOO_LATE = 1
REPEATED = 2
SELOPT_WITHOUT_OPTIONS = 3
SELOPT_WITHOUT_SIGNS = 4
INVALID_SIGN = 5
EMPTY_OPTION_LIST = 6
INVALID_KIND = 7
REPEATED_KIND_A = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
anver
<b><i>if helped pls mark points</i></b> -
Search help on selection screen.
I have a selection screen with
Report name
Variant name
Variant fields
Variant fields is attached to a search help 'Z_Search_variant' and this search help fetches values based on "Report name" "Variant name" on the selection screen.
I am using
AT SELECTION-SCREEN ON VALUE-REQUEST FOR Variant_field
PERFORM f4_help_variant.
FORM f4_help_variant.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = space
fieldname = space
SEARCHHELP = 'Z_SEARCH_VARIANT'
SHLPPARAM = 'REPORT'
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
VALUE = Report
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = 'X'
CALLBACK_PROGRAM = SY-REPID
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB = return_tab
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
How do I pass value to this search help? Currently I do not see this FM allowing this option? Any other options?Hi Vinita,
wat i figured out from your problem is u need how to get values from FM so u can do it in this way..
READ TABLE it_return INTO wa_return INDEX 1.
IF sy-subrc = 0.
wa_output-vkorg = wa_return-fieldval.
ENDIF.
IF wa_output-vkorg IS NOT INITIAL.
MODIFY it_output FROM wa_output INDEX row_id * it_output is final ITAB
TRANSPORTING vkorg.
ENDIF.
CALL METHOD c_alv->refresh_table_display.
CLEAR: wa_return,it_return[],wa_output. -
Search help for selection screen
Hi experts,
I have a selection screen - and the user want that the asearch help will be :
For example: Equi-eqtyp with search help: eqtyp_sh_wd or
equi-matnr with search help mat1.
how can i do this?
thanks,
Michal.Hi, Michal
Are you talking about some thing like bellow ?
PARAMETERS: eqtyp TYPE equi-eqtyp MATCHCODE OBJECT eqtyp_sh_wd,
matnr TYPE equi-matnr MATCHCODE OBJECT mat1.
Please Reply if else.
Faisal -
Hi Experts, a question about search help in selection screen?
Hi Experts,
I have a selection screen and two parameters, one is plant and another is material, what I want is as following:
the user select a plant and when he select the material the material should be in the plant he has filled in, how can I handle this? detail help, thank you in advance.
Kind regards
DawsonHi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
bwkey LIKE t001k-bwkey,
END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
bukrs LIKE t001k-bukrs,
END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
value_org = 'S'
TABLES value_tab = it_bukrs
EXCEPTIONS parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy_repid
dynumb = sy_dynnr
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
IF sy-subrc = 0.
v_bukrs = dynpfields-fieldvalue.
ENDIF.
ENDIF.
SELECT bwkey FROM t001k INTO TABLE it_bwkey WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BWKEY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_BWKEY'
value_org = 'S'
TABLES
value_tab = it_bwkey
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Kumar Bandanadham -
Search help on select optionbased on other select ooption entered
hi,
I need to know search help for selection screen based on value entered in another select options
SELECT-OPTIONS : s_bukrs FOR bkpf-bukrs OBLIGATORY,
s_belnr FOR bkpf-belnr,
s_gjahr FOR bkpf-gjahr OBLIGATORY,
s_budat FOR bkpf-budat OBLIGATORY,
s_akont FOR lfb1-akont,
s_saknr FOR bseg-saknr. """"""""""
*PARAMETERS : p_akont type lfb1-akont.
here i need to get the vaues of s_akont based on values entered in s_bukrs,
In event at selection screeen for s_akont i am writing
SELECT a~bukrs
a~saknr
a~mitkz
b~txt50
FROM skb1 AS a
INNER JOIN skat AS b
ON asaknr = bsaknr
INTO CORRESPONDING FIELDS OF TABLE lt_skb1
WHERE bukrs IN s_bukrs
AND mitkz = 'K'
AND b~spras = 'EN'.
but not getting value of s_bukrs at this point of execution. I requir the fiels in select statement in F4 of s_akont.
what are the function modules to call and what is the way to do??
thanks..Check the below solution for your issue - The FM "'RS_SELECTIONSCREEN_READ" is used to get the S_BUKRS values. Even though the FM returns single values of the Select options ( Low & High ) it fits the requirement.As the trick part is...If user enters multiple values or even enters sign for select options, S_BUKRS itself will have the value. That's why we have If else S_BUKRS[] is initial and R_BUKRS. Let me know if you have any issues with the solution provided.
TABLES: bkpf, lfb1.
DATA lt_fieldvalues TYPE STANDARD TABLE OF rsselread.
DATA ls_fieldvalue TYPE rsselread.
DATA r_bukrs TYPE RANGE OF bkpf-bukrs.
DATA ls_bukrs LIKE LINE OF r_bukrs.
SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs,
s_akont FOR lfb1-akont.
INITIALIZATION.
ls_fieldvalue-name = 'S_BUKRS'.
ls_fieldvalue-kind = 'S'.
ls_fieldvalue-position = 'LOW'.
APPEND ls_fieldvalue TO lt_fieldvalues.
ls_fieldvalue-name = 'S_BUKRS'.
ls_fieldvalue-kind = 'S'.
ls_fieldvalue-position = 'HIGH'.
APPEND ls_fieldvalue TO lt_fieldvalues.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_akont-low.
refresh r_bukrs.
clear ls_bukrs.
IF s_bukrs[] IS INITIAL.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
EXPORTING
program = sy-repid
dynnr = '1000'
TABLES
fieldvalues = lt_fieldvalues.
IF NOT lt_fieldvalues[] IS INITIAL.
ls_bukrs-sign = 'I'.
READ TABLE lt_fieldvalues INTO ls_fieldvalue WITH KEY position = 'LOW'.
IF sy-subrc EQ 0.
ls_bukrs-low = ls_fieldvalue-fieldvalue.
ENDIF.
READ TABLE lt_fieldvalues INTO ls_fieldvalue WITH KEY position = 'HIGH'.
IF sy-subrc EQ 0.
ls_bukrs-high = ls_fieldvalue-fieldvalue.
ENDIF.
IF ls_bukrs-high IS NOT INITIAL.
ls_bukrs-option = 'BT'.
ELSE.
ls_bukrs-option = 'EQ'.
ENDIF.
if ls_bukrs-low is not initial or ls_bukrs-high is not initial.
APPEND ls_bukrs TO r_bukrs.
endif.
ENDIF.
ELSE.
r_bukrs[] = s_bukrs[].
ENDIF.
SELECT a~bukrs a~saknr a~mitkz b~txt50 FROM skb1 AS a
INNER JOIN skat AS b
ON a~saknr = b~saknr
INTO CORRESPONDING FIELDS OF TABLE lt_skb1
WHERE bukrs IN r_bukrs " Changed to r_burks
AND mitkz = 'K'
AND b~spras = 'EN'. -
Attaching search help to a screen field
Hi all,
I've created a search help (zhlp) and want to attach it to the screen field in the selection screen of my report.
SELECT-OPTIONS KSCHL FOR VAKE-KSCHL
MEMORY ID VKS.
I've attached zhlp to the screen by defining it on the element list of the screen 1000.
And the original db table T685 already got a search help H_T685, when I run my report and press F4 in the field, it calls the default search help H_T685 but not mine.
Could anyone help me? Thanks.here is the syntax for assiging search help to selection screen field.
SELECT-OPTIONS KSCHL FOR VAKE-KSCHL MATCHCODE OBJECT ZHLP.
Regards
Raja -
F4 help for a selection screen parameter with filename created dynamically
Hi All,
I have a requirement where in an F4 help should be present for a selection screen parameter. After selecting the filepath and clicking OK button on the Dialog, the filename should be dynamically get created in the selection screen parameter field. For example:
if the path is D:\DOCS then at the end of DOCS the filename should automatically get populated.
Like below string:
D:\DOCS\new.txt
Is there any function module or method which does this kind of activity.
Thanks in advance,
Deepakthis code will help:
FORM get_filename CHANGING p_filename.
DATA : lv_filename TYPE string,
lv_rc TYPE i,
li_filetable TYPE filetable.
CONSTANTS : lc_fname TYPE string VALUE 'ZRPP4000.XLS',
lc_fpath TYPE string VALUE 'C:\',
lc_extn TYPE string VALUE 'XLS'.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
default_filename = lc_fname
initial_directory = lc_fpath
default_extension = lc_extn
CHANGING
file_table = li_filetable
rc = lv_rc
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc = 0 .
READ TABLE li_filetable INTO lv_filename INDEX 1.
IF sy-subrc = 0.
p_filename = lv_filename.
ENDIF.
ENDIF.
REFRESH li_filetable.
CLEAR:lv_filename.
ENDFORM. "get_filename
" p_filename is selection screen parameter -
Elementry search help (value of import parameter)
hi friends..
In my search help...when i pass value in WERKS as CV01 ..then no result is coming..as only CV0 value is passed to import parameter..
and if put CV* then list is coming..
Any IDEA to solve this problem...
Message was edited by:
Madan Gopal SharmaHi
Have you created the search help properly
create by going through the doc and attach to the field werks and see,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Reward points if useful
Regards
Anji -
How Can I get multi column values from dynamic search help?
Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FLD2'
value_org = 'S'
tables
value_tab = It_VALTAB
return_tab = It_return
dynpfld_mapping = It_dynpfld
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
perform get_selected_fields tables It_return.
endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
la_fields-fieldname = <fs_return>-retfield.
la_fields-fieldvalue = <fs_return>-fieldval.
append la_fields to lt_fields.
clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-repid
dynumb = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
tables
dynpfields = lt_fields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
others = 8.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck
Maybe you are looking for
-
Notebook with blue screen of death and HP Ceement errors
Hello, I am using: Product name: HP Pavilion g7 Notebook PC Product number: QE310UA#ABA Windows 7 Home Premium 64-bit Service Pack 1 I have been having a few message/errors lately and suspect they are related 1) The "blue screen of death" has shut do
-
Problem with loading XML file from directory.
Hello everyone. *1)* I have directory defined by DBA. I have read, write privileges. I can read file from this directory using UTL_FILE, I can create file in this directory using UTL_FILE. I tried many times and it does not seem to be any problems. *
-
Way to transfer photos from iphone to card while on vacation?
Is there a way to dump photos to, say, a SD card directly from the iphone. Do not have a computer or ipad away and would like to free up some space. Thank you in advance. Chris
-
How to export purchased tv shows from my iMac to Apple TV
Hello All, I have bought several TV shows from my Apple TV. I purchased them from the TV menu. Somehow the shows end up on my iTunes on my iMac. My question thing is: I can see the tv shows on my iMac in iTunes, but I can't see them or get them to pl
-
Page Break - Not Exporting to PDF Correctly (with Page View)
I am struggling maintaining page breaks upon export of the Form to a PDF even though the Form is set as "Page View". Is there a way to correct this either on the FormsCentral side or acrobat side. It is extremely frustrating not to have page breaks