Dynamic Sql In Report

Hello
Can i use dynamic sql in report builder , so as to allow user-defined reports .
Thanx
Shrikant

read in the help system about lexical variables (these are variables with & at the begining).
So you can define a query as select &P_1 where you get P_1 as a parameter.

Similar Messages

Ref cursors and dynamic sql..

I want to be able to use a fuction that will dynamically create a SQL statement and then open a cursor based on that SQL statement and return a ref to that cursor. To achieve that, I am trying to build the sql statement in a varchar2 variable and using that variable to open the ref cursor as in,
open l_stmt for refcurType;
where refcurType is a strong ref cursor. I am unable to do so because I get an error indication that I can not use strong ref cursor type. But, if I can not use a strong ref cursor, I will not be able to use it to build the report based on the ref cursor because Reports 9i requires strong ref cursors to be used. Does that mean I can not use dynamic sql with Reports 9i ref cursors? Else, how I can do that? Any documentation available?

Philipp,
Thank you for your reply. My requirement is that, sometimes I need to construct a whole query based on some input, and sometimes not. But the output record set would be same and the layout would be more or less same. I thought ref cursor would be ideal. Ofcourse, I could do this without dynamic SQL by writing the SQL multiple times if needed. But, I think dynamic SQL is a proper candidate for this case. Your suggestion to use lexical variable is indeed a good alternative. In effect, if needed, I could generate an entire SQL statement and place in some place holder (like &stmt) and use it as a static SQL query in my data model. In that case, why would one ever need ref cursor in reports? Is one more efficient over the other? My guess is, in the lexical variable case, part of the processing (like parsing) is done on the app server while in a function based ref cursor, the entire process takes place in the DB server and there is probably a better chance for re-use(?)
Thanks,
Murali.

How to rename C00n generic column names in a Dynamic SQL report

I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulP

Hi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

Report using ref cursor or dynamic Sql

Hi,
I never create a report using a ref cursor or a dynamic sql. Could any one help me to solve the below issue.
I have 2 tables.
1. Student_Record
2. Student_csv_help
Student_Record the main table where the data is stored.
Student_csv_help will contain the all the column names of the Student_record.
CREATE TABLE Student_CSV_HELP
ENTRY_ID NUMBER,
RAW_NAME VARCHAR2(40 BYTE),
DESC_NAME VARCHAR2(1000 BYTE),
IN_OUTPUT_LIST VARCHAR2(1 BYTE)
SET DEFINE OFF;
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(1, 'S_ID', 'Student ID', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(2, 'S_Name', 'Student Name', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(3, 'S_Join_date', 'Joining Date', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(4, 'S_Address', 'Address', 'Y');
Insert into TOA_CSV_HELP
(ENTRY_ID, RAW_NAME, DESC_NAME, IN_OUTPUT_LIST)
Values
(5, 'S_Fee', 'Tution Fee', 'N');
commit;
CREATE TABLE Student_record
S_ID NUMBER,
S_Name VARCHAR2(100 BYTE),
S_Join_date date,
S_Address VARCHAR2(360 BYTE),
S_Fee Number
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(101, 'john', TO_DATE('12/17/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94777', 2000);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(102, 'arif', TO_DATE('12/18/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94444', 3000);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(103, 'raj', TO_DATE('12/19/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94555', 2500);
Insert into Student_record
(S_ID, S_Name, S_Join_date, S_Address,S_Fee)
Values
(104, 'singh', TO_DATE('12/20/2009 08:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'CA-94666', 2000);
Commit;
Now my requirement is:
I have a form with Student_record data block. When i Click on print Button on this form. It will open another window which has Student_CSV_HELP.DESC_NAME and a check box before this.
The window look like as below:
check_box       DESC_NAME+
X                   S_ID+
--                   S_Name+
X                   S_Join_date+
X                   S_Address+
--                  S_Fee+
X means check box checked.+
-- means check box Unchecked.+
After i selected these check boxes i will send 2 parameters to the report server
1. a string parameter to the report server which has the value 'S_ID,S_Join_date,S_Address' (p_column_name := 'S_ID,S_Join_date,S_Address');
2. the s_id value from the student_record block (p_S_id := '101');
Now my requirement is when i click on run. I need a report like as below:
Student ID : 101+
Joining Date : 12/17/2009 08:00:00+
Address : CA-94777+
This is nothing but the ref cursor should run like as below:
Select S_id from student_record block S_id = :p_S_id;
Select S_Join_date from student_record block S_id = :p_S_id;
Select S_Address from student_record block S_id = :p_S_id;
So, according to my understanding i have to select the columns at the run time. I dont have much knowledge in creating reports using ref cursor or dynamic sql.
So please help me to solve this issue.
Thanks in advance.

Plain sql should satisfy your need. Try ....
Select S_id, S_Join_date, S_Address
from student_record
where S_id = :p_S_id

Erratic Report Region Behavior with Dynamic SQL Queries

I'm running HTMLDB v 1.5.1.00.12 and I've noticed some odd behavior with report regions using dynamic SQL queries. Every so often, our testers will run a page containing a dynamic sql report region and get the following error, (despite the fact the query was working only moments ago and no other developer has touched it):
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
or sometimes
failed to parse SQL query:ORA-01403: no data found
The only solution I've found so far is to:
1) Make a copy of the failed report region.
2) Disable or delete the original failed report region.
The new copy of the report region runs without issue.
My search of the forums turned up the following two threads, but neither provided me with a clear explanation of the cause, and how to avoid it:
ORA-06502:PL/SQL: numeric or value error: character string buffer too small
Re: Import Export Error (ORA-06502)
The columns being returned are below the 4000 character limit, and the rows being returned are far less than 32k in size.
Could this have anything to do with the way HTMLDB is internally storing the PL/SQL used to generate the dynamic SQL Query? Is there any known issue related to this with that version of HTMLDB?
This problem occurs without any discernable pattern or consistency, making it hard to determine where I should focus my efforts in tracking down the cause.

Hi all,
My report seems to be behaving correctly once i set it to "Use Generic Column Names (parse query at runtime only)" :)
Cheers,
Joel

PLSQL processing of a dynamic sql report

Hi there,
I have a problem processing a dynamic sql report, specifically in referencing the PL/SQL column headings I have.
Basically I have a report that generates one row for each project a person belongs to, and then using htmldb_item.text creates one field for each day of the week (sysdate - sysdate+6) so that people can enter their hours worked. The idea is they then press a submit button and the hours are entered into a project table something like (date_worked, project_id, hours_worked), one row for each entry.
So I have:
for i in 1..HTMLDB_APPLICATION.G_F01.count
loop
... err... here I want to insert into the table the values(column_header, project_id, HTMLDB_APPLICATION.G_F01(i)).. but I don't know how to access that column_header value.
Is this possible and if so, how?
Many thanks,
Tosh.

that gives me the values of the text fields, but what
I'd like to insert is the value of the column
header... so for example:Yes, I understood what you meant. I did have a differect project_id for each INSERT in my SQL above. I guess that should have been day_id
Since you are generating the tabular form SQL manually, you know which htmldb_item.text index corresponds to which column (which represents day_id in your case). So, use this to write 6 INSERT statements, one for each day. day_id would be a number going from 0 thru 6 where 0 represents Sunday and 6 represents Saturday.
Bottom line: This is like generating/updating a calendar, your column headings are always fixed (Sun thru Saturday), just the date they represent would change.

How to obtain IR report dynamic SQL in Apex 4.0

Hello,
I have 2 regions on the same page
Interactive Report –
Chart (Flash Chart) – This is a sub region of the above
Now the requirement is when user applies a filter to the interactive report I would like to apply the same filter criteria to the flash chart so that data representation in flash chart matches with the IR report content. I am fairly new to the Apex, apologies if used any apex terminology in correctly
Appreciate if you can point me in the right direction
Thank you
-Raj

Hello , I did some research how to achieve this , one way is to get the IR report dynamic sql using APEX_IR.GET_REPORT package and apply the same sql for the chart so that the chart representation will match with the IR report data, But the challenge is as i am using the APEX 4.0.0.00.46 version, the APEX_IR package is not available in that version , Any other way we can achieve this in Apex 4.0??
Thanks
-raj

Dynamic SQL for creating report in portal

Has anyone had to create report in Portal using dynamic sql. That is you build up the query commands depending on the parameters entered by the user.
E.g the columns displayed will be what the users has selected in the parameter form.
Urgent reply please,
Femi

Hi,
You can use SQL based reports to do this. The report should have a bind variable. The bind variable is used for the users to enter their values and query is built using the value in the bind variable. The user should enter the value of the bind variable from the customization screen.
Here is an example
select * from scott.emp
where deptno = :vdept
Here vdept appears in the customization screen and user should enter a value for this and run the report.
Thanks,
Sharmila

How to implement Dynamic Sort to an SQL classic report?

Hi,
I'm trying to implement dynamic sort to my working sql classic report, when user selects order by column from select item(action as submit page), the report should be refreshed and display with the selected column sort order.
But not able to do so.
Report Query:
Select a, b, c from sample order by :P1_ORDER_BY
P1_ORDER_BY - Select Item:
STATIC2: Column 1;a, Column 2;b, Column 3;c
Running page, report doesnt sorts in any of the column priority.
Kindly guide.
Regards,
Krishna

Of course the select item is in use.
It should submit the the page on select so you can retrieve the current value in you report select statement.
look here:
http://apex.oracle.com/pls/apex/f?p=21296:2:
table:
create table sample
a varchar2(30)
, b varchar2(30)
, c varchar2(30)
insert into sample values('a','z','k');
insert into sample values('b','y','d');
insert into sample values('c','x','a');
insert into sample values('d','w','b');
commit;
Select List:
P2_ORDER_BY
STATIC:Order by A;A,Order by B;B,Order by C;C
Report select:
select
a,b,c
from sample
order by
decode(:P2_ORDER_BY,'A',a,null)
, decode(:P2_ORDER_BY,'B',b,null)
, decode(:P2_ORDER_BY,'C',c,null)Marc
Edited by: telemat on Aug 24, 2012 1:50 PM

Dynamic sql and ref cursors URGENT!!

Hi,
I'm using a long to build a dynamic sql statement. This is limited by about 32k. This is too short for my statement.
The query results in a ref cursor.
Does anyone have an idea to create larger statement or to couple ref cursors, so I can execute the statement a couple of times and as an result I still have one ref cursor.
Example:
/* Determine if project is main project, then select all subprojects */
for i in isMainProject loop
if i.belongstoprojectno is null then
for i in ProjectSubNumbers loop
if ProjectSubNumbers%rowcount=1 then
SqlStatement := InitialStatement || i.projectno;
else
SqlStatement := SqlStatement || PartialStatement || i.projectno;
end if;
end loop;
else
for i in ProjectNumber loop
if ProjectNumber%rowcount=1 then
SqlStatement := InitialStatement || i.projectno;
else
SqlStatement := SqlStatement || PartialStatement || i.projectno;
end if;
end loop;
end if;
end loop;
/* Open ref cursor */
open sql_output for SqlStatement;
Thanks in advance,
Jeroen Muis
KCI Datasystems BV
mailto:[email protected]

Example for 'dynamic' ref cursor - dynamic WHERE
(note that Reports need 'static' ref cursor type
for building Report Layout):
1. Stored package
CREATE OR REPLACE PACKAGE report_dynamic IS
TYPE type_ref_cur_sta IS REF CURSOR RETURN dept%ROWTYPE; -- for Report Layout only
TYPE type_ref_cur_dyn IS REF CURSOR;
FUNCTION func_dyn (p_where VARCHAR2) RETURN type_ref_cur_dyn;
END;
CREATE OR REPLACE PACKAGE BODY report_dynamic IS
FUNCTION func_dyn (p_where VARCHAR2) RETURN type_ref_cur_dyn IS
ref_cur_dyn type_ref_cur_dyn;
BEGIN
OPEN ref_cur_dyn FOR
'SELECT * FROM dept WHERE ' | | NVL (p_where, '1 = 1');
RETURN ref_cur_dyn;
END;
END;
2. Query PL/SQL in Reports
function QR_1RefCurQuery return report_dynamic.type_ref_cur_sta is
begin
return report_dynamic.func_dyn (:p_where);
end;
Regards
Zlatko Sirotic
null

ORA-01008 with ref cursor and dynamic sql

When I run the follwing procedure:
variable x refcursor
set autoprint on
begin
Crosstab.pivot(p_max_cols => 4,
   p_query => 'select job, count(*) cnt, deptno, row_number() over (partition by job order by deptno) rn from scott.emp group by job, deptno',
   p_anchor => Crosstab.array('JOB'),
   p_pivot => Crosstab.array('DEPTNO', 'CNT'),
   p_cursor => :x );
end;I get the following error:
^----------------
Statement Ignored
set autoprint on
begin
adsmgr.Crosstab.pivot(p_max_cols => 4,
p_query => 'select job, count(*) cnt, deptno, row_number() over (partition by
p_anchor => adsmgr.Crosstab.array('JOB'),
p_pivot => adsmgr.Crosstab.array('DEPTNO', 'CNT'),
p_cursor => :x );
end;
ORA-01008: not all variables bound
I am running this on a stored procedure as follows:
create or replace package Crosstab
as
    type refcursor is ref cursor;
    type array is table of varchar2(30);
    procedure pivot( p_max_cols       in number   default null,
                     p_max_cols_query in varchar2 default null,
                     p_query          in varchar2,
                     p_anchor         in array,
                     p_pivot          in array,
                     p_cursor in out refcursor );
end;
create or replace package body Crosstab
as
procedure pivot( p_max_cols          in number   default null,
                 p_max_cols_query in varchar2 default null,
                 p_query          in varchar2,
                 p_anchor         in array,
                 p_pivot          in array,
                 p_cursor in out refcursor )
as
    l_max_cols number;
    l_query    long;
    l_cnames   array;
begin
    -- figure out the number of columns we must support
    -- we either KNOW this or we have a query that can tell us
    if ( p_max_cols is not null )
    then
        l_max_cols := p_max_cols;
    elsif ( p_max_cols_query is not null )
    then
        execute immediate p_max_cols_query into l_max_cols;
    else
        RAISE_APPLICATION_ERROR(-20001, 'Cannot figure out max cols');
    end if;
    -- Now, construct the query that can answer the question for us...
    -- start with the C1, C2, ... CX columns:
    l_query := 'select ';
    for i in 1 .. p_anchor.count
    loop
        l_query := l_query || p_anchor(i) || ',';
    end loop;
    -- Now add in the C{x+1}... CN columns to be pivoted:
    -- the format is "max(decode(rn,1,C{X+1},null)) cx+1_1"
    for i in 1 .. l_max_cols
    loop
        for j in 1 .. p_pivot.count
        loop
            l_query := l_query ||
                'max(decode(rn,'||i||','||
                           p_pivot(j)||',null)) ' ||
                            p_pivot(j) || '_' || i || ',';
        end loop;
    end loop;
    -- Now just add in the original query
    l_query := rtrim(l_query,',')||' from ( '||p_query||') group by ';
    -- and then the group by columns...
    for i in 1 .. p_anchor.count
    loop
        l_query := l_query || p_anchor(i) || ',';
    end loop;
    l_query := rtrim(l_query,',');
    -- and return it
    execute immediate 'alter session set cursor_sharing=force';
    open p_cursor for l_query;
    execute immediate 'alter session set cursor_sharing=exact';
end;
end;
/I can see from the error message that it is ignoring the x declaration, I assume it is because it does not recognise the type refcursor from the procedure.
How do I get it to recognise this?
Thank you in advance

Thank you for your help
This is the version of Oracle I am running, so this may have something to do with that.
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
I found this on Ask Tom (http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3027089372477)
Hello, Tom.
I have one bind variable in a dynamic SQL expression.
When I open cursor for this sql, it gets me to ora-01008.
Please consider:
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.4.1 - Production
JServer Release 8.1.7.4.1 - Production
SQL> declare
2    type cur is ref cursor;
3    res cur;
4 begin
5    open res for
6    'select * from (select * from dual where :p = 1) connect by 1 = 1'
7    using 1;
8 end;
9 /
declare
ERROR at line 1:
ORA-01008: not all variables bound
ORA-06512: at line 5
SQL> declare
2    type cur is ref cursor;
3    res cur;
4 begin
5    open res for
6    'select * from (select * from dual where :p = 1) connect by 1 = 1'
7    using 1, 2;
8 end;
9 /
PL/SQL procedure successfully completed.
And if I run the same thing on 10g -- all goes conversely. The first part runs ok, and the second
part reports "ORA-01006: bind variable does not exist" (as it should be, I think). Remember, there
is ONE bind variable in sql, not two. Is it a bug in 8i?
What should we do to avoid this error running the same plsql program code on different Oracle
versions?
P.S. Thank you for your invaluable work on this site.
Followup   June 9, 2005 - 6pm US/Eastern:
what is the purpose of this query really?
but it would appear to be a bug in 8i (since it should need but one). You will have to work that
via support. I changed the type to tarray to see if the reserved word was causing a problem.
variable v_refcursor refcursor;
set autoprint on;
begin
     crosstab.pivot (p_max_cols => 4,
             p_query =>
               'SELECT job, COUNT (*) cnt, deptno, ' ||
               '       ROW_NUMBER () OVER ( ' ||
               '          PARTITION BY job ' ||
               '          ORDER BY deptno) rn ' ||
               'FROM   emp ' ||
               'GROUP BY job, deptno',
               p_anchor => crosstab.tarray ('JOB'),
               p_pivot => crosstab.tarray ('DEPTNO', 'CNT'),
               p_cursor => :v_refcursor);
end;
/Was going to use this package as a stored procedure in forms but I not sure it's going to work now.

Ref cursor and dynamic sql

Hi..
I'm using a ref cursor query to fetch data for a report and works just fine. However i need to use dynamic sql in the query because the columns used in the where condition and for some calculations may change dynamically according to user input from the form that launches the report..
Ideally the query should look like this:
select
a,b,c
from table
where :x = something
and :y = something
and (abs(:x/:y........)
The user should be able to switch between :x and :y
Is there a way to embed dynamic sql in a ref cursor query in Reports 6i?
Reports 6i
Forms 6i
Windows 2000 PRO

Hello Nicola,
You can parameterize your ref cursor by putting the query's select statement in a procedure/function (defined in your report, or in the database), and populating it based on arguments accepted by the procedure.
For example, the following procedure accepts a strongly typed ref cursor and populates it with emp table data based on the value of the 'mydept' input parameter:
Procedure emp_refcursor(emp_data IN OUT emp_rc, mydept number) as
Begin
-- Open emp_data for select all columns from emp where deptno = mydept;
Open emp_data for select * from emp where deptno = mydept;
End;
This procedure/function can then be called from the ref cursor query program unit defined in your report's data model, to return the filled ref cursor to Reports.
Thanks,
The Oracle Reports Team.

SQL Server Reporting Services FAQ

Hi All,
This thread is a summary of the Frequently Asked Questions on SQL Server Reporting Services. We consolidate them and post here for your reference. If you have any further questions, please kindly start a new thread so that more community members, MVPs, and MSFTs can join the discussion and share their ideas. Thanks for your understanding.
Part I: SQL Server Reporting Services General Topics
1. How to migrate SQL Server 2008 Reporting Services to another computer?
2. How to combine connecting string via parameter?
3. How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
4. Error of EXECUTE permission denied on object 'xp_sqlagent_notify'.
5. Security consideration for anonymous access to Report Server.
6. How to create a custom report template in Reporting Services?
7. Does Reporting Services support horizontal tables which have fixed rows and dynamic columns?
8. How to reset the page number back to 1 every time the report gets a group break?
9. How to open the drill- through report in a new browser window?
10. How to verify the version of SQL Server?
11. How to use multiple datasets?
12. How to upgrade report from SQL Server 2000 to SQL Server 2005?
13. Out of memory error when exporting reports to Excel.
14. How to improve PDF quality of the report exported in Reporting Services 2005?
15. How to enable the Select All option for a multi-value parameter?
Part II: SQL Server Reporting Services SharePoint Integrated Mode Topics
1. How to deploy reports to SQL Server Reporting Services in SharePoint Services integrated mode?
2. How to integrate SQL Server Reporting Services and SharePoint Services?
3. How to refer the reports on the Report Server in SharePoint Services?
4. How to manage user to view reports in SharePoint integrated mode?
5. What information is needed when posting questions regarding SharePoint integrated mode?
6. Is Report Builder available in SharePoint Integrated Mode?
PLEASE NOTE: Microsoft does not offer formal support for the communities you'll find here. Instead, our role is to provide a platform for people who want to take advantage of the global community of Microsoft customers and product experts. Microsoft may monitor content to ensure the accuracy of the information you'll find, but any information provided by Microsoft staff is offered "AS IS" with no warranties, and no rights are conferred. You assume all risk for your use.
Microsoft Online Community Support

1.        Question 3: How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
Answer:
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 6.0, we can follow these following steps:
1.       Uninstall the 64-bit version of Reporting Services.
Note: Side-by-side installations of 32-bit versions of Reporting Services and 64-bit versions of Reporting Services are not supported.
2.       Run the Dotnetfx64.exe file to manually install the .NET Framework.
The Dotnetfx64.exe file is in the Tools\redist\2.0 folder on the SQL Server 2005 Setup media. To download the Dotnetfx64.exe file, visit the following Microsoft Web site:
http://go.microsoft.com/fwlink/?LinkId=70186
3.       In IIS Manager, click Web Server Extensions.
4.       In the Details pane, right-click ASP.NET V2.0.50727, and then click Allow.
5.       Right-click Web Sites, and then click Properties.
6.       Click the ISAPI Filters tab.
7.       In the Filter Name column, click ASP.NET_2.0.50727, and then click Edit.
8.       Replace C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\aspnet_filter.dll with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_filter.dll.
Note: The Aspnet_filter.dll file in the C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ folder is a 32-bit version of the file.
9.       Click OK two times, and then close IIS Manager.
10.   At a command prompt, run the following command:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
11.   Install the 32-bit version of Reporting Services.
12.   After setup is complete, open IIS Manager, and then click Web Server Extensions.
13.   In the Details pane, right-click ASP.NET V2.0.50727 (32-bit), and then click Allow.
To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 7.0, follow these steps:
1.       Enable ASP.NET and IIS before you install Reporting Services.
2.       Open a command prompt. To do this, click Start, point to All Programs, point to Accessories, right-click Command Prompt, and then click Run as administrator.
3.       In the User Account Control dialog box, click Continue.
4.       Copy the following script:
cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
5.       In the upper-left corner of the Command Prompt window, right-click the command prompt icon, click Edit, and then click Paste.
6.       Press ENTER to run the script.
7.       Install the 32-bit version of Reporting Services. You must apply SQL Server 2005 Service Pack 2 (SP2) after you install Reporting Services in Windows Vista. If you install SQL Server 2005 Express Edition with Advanced Services, you can run SQL Server 2005 Express Edition with Advanced Services SP2.
For more information, visit the following Microsoft Web site:
Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2
http://go.microsoft.com/fwlink/?LinkID=63922
8.       Reset IIS.
9.       Configure the report server for local administration. To access the report server and Report Manager locally, follow these steps:
a.       Start Microsoft Internet Explorer.
b.      On the Tools menu, click Internet Options.
c.       Click Security.
d.      Click Trusted Sites.
e.      Click Sites.
f.        Under Add this website to the zone, type http://servername.
g.       If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box.
h.      Click Add.
i.         Repeat steps f and g to add http://localhost, and then click Close.
10.   This step lets you start Internet Explorer either to localhost or to the network computer name of the server for both Report Server and Report Manager.
a.       Create role assignments that explicitly grant you full-permissions access. To do this, follow these steps:
b.      Start Internet Explorer by using the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
c.       Start Report Manager.
d.      Note By default, the Report Manager URL is http://servername/reports. If you are using SQL Server 2005 Express Edition with Advanced Services SP2, the Report Manager URL is http://servername/reports$sqlexpress. If you are using a named instance of Reporting Services, the Report Manager URL is http://servername/reports$InstanceName
e.      On the Home page, click Properties.
f.        Click New Role Assignment.
g.       Type a Windows user account in the following format: domain\user
h.      Click to select the Content Manager check box.
i.         Click OK.
j.        In the upper-right corner of the Home page, click Site Settings.
k.       Click Configure site-wide security.
l.         Click New Role Assignment.
m.    Type a Windows user account in the following format: domain\user
n.      Click to select the System Administrator check box.
o.      Click OK.
p.      Close Report Manager.
11.   Open Report Manager in Internet Explorer without using the Run as administrator option.
Microsoft Online Community Support

Flash chart with dynamic sql query does not display

Hi,
In my schema SIVOA I have a lot of tables declared like this :
CREATE TABLE "SIVOA"."EVV_xxxx"
   (     "CLEF_VAR" NUMBER(4,0),
     "DATE1" DATE,
     "VALEUR" NUMBER(16,8) Only the last part of the name changes "xxxx". For example E009, E019, etc....
I am making a chart page with report and want the user to select a name of a table and I will display using dynamic sql query, the table report and chart.
P184_ENAME is a select list returning the last part of the name of the table, fro example 'E009', 'E019', etc.
P8_CLEF_VAR is an item containing a value. This value is a key retrieved like this :SELECT CLEF_VAR
FROM SIVOA.SITE_ECHELLE
WHERE SITE = :P184_ENAMEI built a classic report using a sql dynamic function :DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = :p8_clef_var' ;
RETURN (x);
END;:p8_clef_var is an itme containing the value '4544'.
This works perfectly fine !
When I use this sql fucytion into a flash chart it does not work. I get this message "No data found".
I do not understand why a the report get a result and not the chart !
But if i hard-code the number of the CLEF_VAR instead of fetching it from :p8_clef_var I get a nice chart ! Go figure !DECLARE
x VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, VALEUR FROM SIVOA.EVV_'
|| UPPER(:p184_ename)
|| ' WHERE CLEF_VAR = 4544 ' ;
RETURN (x);
I cannot stay with the key (CLEF_VAR) hard-coded unformtunately !
My question is how to get the chart displaying properly ??
Thank you for your kind answers.
Christian

Alex,
Using your request, with the classic report I get results (data), but I get the same message with the Flash chart : "No data found" ! I don't know how to investigate this. i tried many things but nothing works.
Christian
PS I tried this :
DECLARE
   X   VARCHAR2 (4000);
BEGIN
x := 'SELECT NULL, DATE1, ROUND(VALEUR,2) FROM SIVOA.EVV_'
      || UPPER (:p184_ename) ||
      ' WHERE CLEF_VAR = '
      || :p8_clef_var ||
      ' AND DATE1 BETWEEN TO_DATE ('''
||:P8_DATE_DEBUT||''', ''DD/MM/YYYY HH24:MI'') AND TO_DATE ('''
||:P8_DATE_FIN||''', ''DD/MM/YYYY HH24:MI'')'
RETURN (X);
END; But it does not work either. I could find that the SLQ syntax generated is good becaus I put it into an item which display the return done by the pls/sql.
What is sttange also with the classic report is that if I do click on next or previous to see another rows, I get the message "No data found". If I try to export the report I get an excel file with "No data fouid".
Does anybody already tried my "need" here ? i find strange thant I should not be the firs one trying to get a report an tables which name would be "dynamic".
Tahnk you.
Edited by: Christian from France on Feb 13, 2009 3:05 AM

Dynamic Sql In Report

Similar Messages

Maybe you are looking for