Dynamic table in Oracle report data model using laxical parameter is giving error Ora-00936: missing expression

Hi ,
I am using Oracle report 10G
And trying to create report with dynamic table
SELECT &COL1, &COL2
FROM &TAB
If I put this on data model it gives below error
ORA-00936: missing expression
==> from
Can anybody advise to solve this issue.
Regards,
Brajesh

Look in the Reports Builder Help:
If you want to use lexical references in your SELECT clause, you should create a separate lexical reference for each column you will substitute. In addition, you should assign an alias to each lexical reference.
Does adding the column alias solve the problem?

Similar Messages

ERROR: ORACLE prepare error: ORA-00936: missing expression

Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153           biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163      )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184

Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date       Programmer         Reviewed By     WHAT WAS DONE;
24 *-----      --------------     ------------    -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155      BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

Error while loading Flat file to the table (ORA-00936: missing expression)

lat file Hi Gurus
Receiving the following error while trying to load of flat file to the database :
ODI-1228: Task test_file_load (Integration) fails on the target ORACLE connection DEMO_STAGE.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
The file which I have tried to load is : SRC_SALES_PERSON and teh table structure is
CREATE table "TRG_SALES_PERSON"(
"SALES_PERSON_ID" NUMBER(8,0) NOT NULL,
"FIRST_NAME" VARCHAR2(80),
"LAST_NAME" VARCHAR2(80),
"DATE_HIRED" VARCHAR2(80),
"DATE_UPDATED" DATE NOT NULL)
Knowledge module used are
LKM File to SQL
IKM SQL Incremental Update
We rae using ODI 11g R2 ...
Thanks and reallty appreciate any help in thsi regard.

HI there,
I am facing the same issue while loading data from SRC_SALES_PERSON(flat file) to TRG_CUSTOMER.
I dont see any errors in the steps however the data is not laoded finally. Here are the sql commands
**On source**
select     ID     C11_ID,
     LASTNAME     C9_LASTNAME
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=SRC_SALES_PERSONSNP$CRLOAD_FILE=D:\Pratima\Softwares\ODI\ofm_odi_companion_generic_11.1.1.5.1_disk1_1of1[1]\demo\oracledi-demo\oracledi\demo\file/SRC_SALES_PERSON.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=IDSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=11SNP$CRPRECISION=11SNP$CRACTION_ON_ERROR=0SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FIRSTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=12SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=LASTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=62SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DATE1SNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=112SNP$CRLENGTH=20SNP$CRPRECISION=20SNP$CR$$SNPS_END_KEY*/
On Target
insert into STAGING.C$_0TRG_CUSTOMER
     C11_ID,
     C9_LASTNAME
values
     :C11_ID,
     :C9_LASTNAME
The actual code at source fails however the step is in green.
Thanks in Advance,
Pratima

ORA-00936: Missing Expression when using a claculation as a condition item

Hi
I created a calculation below to create a subtotal on each row of a group of selected items.
SUM(Invoice Amount)OVER(PARTITION BY Supplier Num ORDER BY Payment Currency Code)
This worked fine - but then I wanted to create a condition based on this calculation and when I used the calculation as a condition item and reran the report I received the 'ORA-00936: Missing Expression' error. So not too sure why it is fine as a calculation but not as part of a condition.
We use Discoverer version 4.1
Am I missing something or is this a bug?
Any help would be very appreciated
Thanks
Marcus

Thanks for your reply, Rod
We are using the 9.2.0.5 version of the database
I am not a SQL expert, by any means, but below is the line that refers to the condition in the sql inspector
WHERE ( ( E_152 )/2 > 50)
presuambly that means E_152 is the calculation, I think this may be refering to this at the beginning of the report:
SELECT DISTINCT E316344 as E316344,E316372 as E316372,E316411 as E316411,E316425 as E316425,E316496 as E316496,E316497 as E316497,E316498 as E316498,E316510 as E316510,E316511 as E316511,E316512 as E316512,E316515 as E316515,E316517 as E316517,E316519 as E316519,E316520 as E316520,E_24 as E_24,E_21 as E_21,E_18 as E_18,E_16 as E_16,E_13 as E_13,E_11 as E_11,E316501 as E316501 FROM ( SELECT E_152 as E_152,DISTINCT E316344 as E316344,E316372 as E316372,E316411 as E316411,E316425 as E316425,E316496 as E316496,E316497 as E316497,E316498 as E316498,E316510 as E316510,E316511 as E316511,E316512 as E316512,E316515 as E316515,E316517 as E316517,E316519 as E316519,E316520 as E316520,E_24 as E_24,E_21 as E_21,E_18 as E_18,E_16 as E_16,E_13 as E_13,E_11 as E_11,E316501 as E316501 FROM ( SELECT DISTINCT i316344 as E316344,i316372 as E316372,i316411 as E316411,i316425 as E316425,i316496 as E316496,i316497 as E316497,i316498 as E316498,i316510 as E316510,i316511 as E316511,i316512 as E316512,i316515 as E316515,i316517 as E316517,i316519 as E316519,i316520 as E316520,SUM(i316501) OVER(PARTITION BY i316345 ORDER BY i316520 )/2 as E_24,( i316501-( NVL(i316502,0) ) )*( NVL(i316522,1) ) as E_21,i316501-( NVL(i316502,0) ) as E_18,NVL(i316502,0) as E_16,i316501*( NVL(i316522,1) ) as E_13,NVL(i316522,1) as E_11,i316501 as E316501,SUM(i316501) OVER(PARTITION BY i316345 ORDER BY i316520 ) as E_152
Apologies if this info is not that helpful
Would it have anything to do with the fact that the row calculation is based on several rows (i.e. a subtotal) and if a single row is excluded it would change the value of the other rows within that subtotal group. Maybe it causes some sort of circular issue?
Anyway, thanks again for your help - hopefully we can resolve it
Marcus

Report error ORA-00936 (correction) urgent

I wrote a quey
select cardno,name,incharge,phone,fax,email from agreement
ORDER BY &SORT;
and getting an erro ora-00936 missing expression,
why this error is shown,
i want to make a lexical paramater , and want to give end user the option to choose from a list (to order by) the report,
please tell me the solution

Hello,
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/dmobj/sq_a_lexical_references.htm
You create a lexical reference by typing an ampersand (&) followed immediately by the column or parameter name. A default definition is not provided for lexical references. Therefore, you must do the following:
Before you create your query, define a column or parameter in the data model for each lexical reference in the query. For columns, you must set the Value if Null property, and, for parameters, you must set the Initial Value property. Reports Builder uses these values to validate a query with a lexical reference.
Create your query containing lexical references.
Regards

Message error ORA-00936 when using JDBC adapter

Hi all,
I'm using the folow scenario:
RFC --> XI --> JDBC
RFC <-- XI <-- JDBC (response)
It's a SYNCHRONOUS interface.
RFC call without COMMIT WORK:
CALL FUNCTION 'Y_TESTE_NEI'
    DESTINATION 'RFC_XI'
EXPORTING
   DATE_FROM       = v_data_from
   DATE_TO         = v_data_to
TABLES
    t_return        = t_dados.
I'm not using KEY in JDBC message, because for test I want to get entiry table, and I set the communication channel JDBC to KEY not mandatory.
I'm not having mapping error, in SXMB_MONI I can see the two messages of interface, but both with SYSTEM ERROR.
In JDBC adapter in Runtime Workbench apears the follow message error:
com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 't7_productionorder' (structure 't7_productionorder'): java.sql.SQLException: ORA-00936: missing expression
And DUMP in function call in R/3: CALL_FUNCTION_REMOTE_ERROR
Could anyone help me about this problem ?
Thanks in advance.
Regis Ferrato

Hi Regis,
I did the same scenario just now. The error you get is, you need to check whether the fields you are entering into the database have correct datatypes.
Check out your database structure with your structure in XI, and also test in Message Mapping, to make sure you are sending correct values.
In my case I was sending date like this '10-12-06', but my DB accepts only '101206'. So I removed the '-'. It was fine .
The Dumping error is not due to your ABAP, due to the DB operation.
Let me know Whether I am correct.
Raj.

Oracle stored procedure+ jdbc+java.sql.SQLException: ORA-00936: missing exp

Here is a chunk of code from my servlet, which is calling a stored procedure...
String userID = request.getParameter("hdnUserID");
        String serialNum = "123456789";
        String pinNum = "987654321";
        String cliNum = request.getParameter("txtclinum");
        String price = request.getParameter("txtprice");;
        String creationDate = "";
        String ActivationDate = "";
        String validityMonths = request.getParameter("ddlvaliditymonths");
        String balance = "100";
        String statusId = request.getParameter("ddlstatus");
        String batchId = request.getParameter("ddlbatch");
        String retID = request.getParameter("hdnID");
        String vID = retID;
xDatabase db = new xDatabase();
         try {
             CallableStatement pCall = db.m_conDatabase.prepareCall(
                     "{call bil_sp_add_scratch_card_batch(?,?,?,?,?,?,?,?,?,?,?,?)}");
             pCall.setString(1, retID);
             pCall.setString(2, serialNum);
             pCall.setString(3 , pinNum);
             pCall.setString(4 , cliNum);
             pCall.setString(5 , price);
             pCall.setString(6 , creationDate);
             pCall.setString(7 , ActivationDate);
             pCall.setString(8 , validityMonths);
             pCall.setString(9 , statusId);
             pCall.setString(10 , batchId);
             pCall.setString(11 , balance);
             pCall.setString(12 , userID);
             pCall.executeQuery();
             //close the statement
             pCall.close();and here are the stored procedures parameters.. the stored procedure works fine as i tested it manually in oracle..
create or replace procedure bil_sp_add_Edit_scratch_card
v_CARD_ID              in         out        varchar2,
v_CARD_SERIAL_NUM         in        varchar2,
V_CARD_PIN_NO             in        varchar2,
V_CLI_NO                  in        varchar2,
V_CARD_PRICE                  in    varchar2,
V_CARD_CREATION_DATE          in    varchar2,
V_CARD_ACTIVATION_DATE        in    varchar2,
V_CARD_VALIDITY_MONTHS        in    varchar2,
V_CARD_STATUS_ID              in    varchar2,
V_SCRATCH_CARD_BATCH_ID      in    varchar2,
V_CARD_BALANCE               in    varchar2,
user_id in         varchar2
)And i get this exception
java.sql.SQLException: ORA-00936: missing expression
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java)
     at oracle.jdbc.driver.OracleStatement.doScrollStmtExecuteQuery(OracleStatement.java)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java)
     at ibill.xDatabase.executeSQL(xDatabase.java:143)
     at org.apache.jsp.iBillForms.scratchCardNewAddEdit_jsp._jspService(org.apache.jsp.iBillForms.scratchCardNewAddEdit_jsp:98)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)I am sending all the required parameters to the procedure then what is the problem?

OOPPPSssssss..
Oh GOD is there somebody out there. who would like to kill me..
The only problem was that i was calling the wrong stored procedure
:(

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

Create data models using interactive reporting

Hey guys,
I was wondering how you create data models using interactive reporting. An simple example would be great? I would really appreciate if I could get an answer.
Also, I wanted to understand a real world situation that you guys might have faced with creating data models, etc...thanks a ton :-)
-- Adi

Your question is not that much clear on what you are asking for.
But for reference please have a look at the below doc which explain the Integration with IR and webanalysis what you require.
IR and WebAnalysis with Essbase
Thanks,
~KKT~

Oracle network data modele on mapviewer

bonjour , goodmorning
English:
I have an application of oracle network data modele witch contains node , link , plink and path tables. and i like to view this whith mapviewer application on web page, i was setup mapviewer 10.1 with OC4J and i saw the mvdemo without errors ... please get me the steps to do for visualizing my network.
Français:
j'ai mon propre réseau oracle network data modele et je voudrais le visualiser avec mapviewer sur une page web. le réseau contient les quatres tables necéssaire et pas de probleme dans ce coté. j'ai bien installer mapviewer avec le serveur OC4j et j'ai visualiser l'exemple mvdemo sans aucun probleme... SVP indiquez moi les etapes a suivre afin de visualiser mon reseau.

First may I recommend that you use the latest MapViewer quick start kit, which is 11g R1.
On your mapviewer web site, if you click the "Demos" tab, there is a link to a simple Network demo page. Have you tried using that? You should populate it with your own network data (network name et al). Let us know if you need more information on how to make this demo work with your data.
thanks
LJ

What happened to Effort metrics in the Custom Reports data model?

What happened to Effort metrics in the Custom Reports data model?
Is there any way to use the Custom Reports data model to report on task effort? This was a metric captured in the Standard Reports Data Package, but looking through the metrics in the Custom Reports data model (particularly the ServiceTask Fact table) I do not see any effort related metric.

Ed is right. The Custom Report data model on pre-2007.1.1 did not contain task effort data but it is added as a fact to report against in the 2007.1.1 release. You will get this once you upgrade to 2007.1.1 and turn on the task effort entry setting in site administration.

Building data model using business modeler in demantra

Hello.
During this week I've been trying to build a data model using the business modeler but i keep getting an error during the process. My main problem is that I don't really know if i am making the mistake or it is a configuration problem with my demantra install. To begin with I'm trying to build the most simple of the models, 3 files or tables (tryed both) sales, items, and location, all joined by their respectives id's. So If anyone could be so kind to direct me to a tutorial with an example (besides the implementation guide) or a anything like that will be greatly appreciated.
Thanks!
Data tables estructure:
Sales table:
Item_Id|Item_Name|Org_Id|Org_Name|Site_Id|Site_name|sales_date|Quantity
Items table:
Item_Id|Item_Name
Location table:
Org_Id|Org_Name|Site_Id|Site_name
So far I've tryed building the model with one record on each table.
this is the error that i'm getting:
<a href="http://imageshack.us/photo/my-images/832/errornuevo.png/"></a>
Uploaded with ImageShack.us

We currently don't support DataControls based on the ADF BC technology. We will consider such support if there is a strong interest in that use case.
Independent of the IDE's you use, there are ways to expose services based on ADF BC that can then be consumed by the view layer. A Google search will point you to some of the approaches.
HTH. Thanks for your interest in OEPE.

Logical data Model Using ODI

Can I create Logical data Model Using ODI ? If yes how can I do it ?

User,
ODI is not a tool to design. It's a comprehensive integration platform.
However if you would like to model your data, you can use for example Oracle Designer 9i, which is availble one the Oacle website for free.
Oracle 10gR2 Designer is also availble at: http://www.oracle.com/technology/software/products/designer/htdocs/winsoft.html
Good luck.
Edited by: kumper on 2008-10-16 00:33

AS/400 Tables in oracle reports

Hello,
Could anyone help me out whether we can use AS/400 database's tables in oracle reports??
Thanks.

As far as I know Oracle has a possibility to communicate with a AS400 database. More info can be found here: http://download-east.oracle.com/docs/html/A97615_01/title.htm
Marcos

Dynamic table in Oracle report data model using laxical parameter is giving error Ora-00936: missing expression

Similar Messages

Maybe you are looking for