Dynamic table with header on each page
Hi,
I am new to livecycle forms. I am not sure if I am asking a silly question but this is what I need to achieve.
I am designing a pdf form using livecycle designer. Need to build a dynamic table using data from xml. The challenge is I need to have a signature button on each page and the button will be below the table. So if there are for eg. 100 rows of data, then the table should be split into 5 pages of 20 rows each page (each page should have the table header) or based on page content and the button should be on the bottom of each page. Is it possible to achieve this? Also any example/suggestion on implementing signature using signature pad would be greatly appreciated.
Hi,
For individual objects, like the button that you want to appear on each page, you should place this on the Master Page. Position the button at the bottom of the page and then make sure that you size the Content Area, so that the button is OUTSIDE of the content area. This way objects on the design page will not overflow over the button. See here: http://assure.ly/g0Wx7r.
If you are using a Table object for your data, then you can set it to repeat the Header row, see the Object palette.
If you are using ADEP Designer 10 (latest version of Designer) AND your users will have Acrobat X/Reader X (eg version 10.1), then you could use Flash object for a signature field. See the example here: http://assure.ly/rqCuEn. See "Assure Dynamics Map with Signature" example. Again please note that you will need Acrobat X/Reader X to view this.
Hope that helps,
Niall
Similar Messages
-
Dynamic table with header locked and vertical scrollbar problem.
Hi,
I have created a dynamic table with header locked.The sample code is as below.
<div style="width:910px ; overflow-x : scroll">
<h:panelgrid ...for header populated by binding to pagecode/>
<div style="width:910px ; height:200px ; overflow-y : scroll">
<h:panelgrid ...for data populated by binding to pagecode/>
</div>
</div>
The above piece of code serves the purpose.
There is an overflow in both x as well as y directions and scrollbars appear.But the y scrollbar can be seen only when the x-scrollbar is moved to the extreme right.
Does anyone have a solution so that both the scrollbars can be seen as soon as the table loads without the need to move x to the extreme right to see y?wa_layout-grid_title = text-039.
wa_layout-sel_mode = 'A'.
APPEND wa_layout TO gs_layout.
wa_layout-grid_title = text-039.
wa_layout-sel_mode = 'A'.
APPEND wa_layout TO gs_layout.
wa_layout-grid_title = text-039.
wa_layout-sel_mode = 'A'.
APPEND wa_layout TO gs_layout.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_fieldcatalog = it_fieldcatalog1[]
it_outtab = <l_table>.
i am using like but its not accepting more than one line header in is_layout, is there any possibility to take like this.
Regards,
Mallikarjuna. -
ALV Display with header on each page.
Hi experts,
I had develop the report which output comes in ALV with heading. While printing the output, suppose there are 60 lines in output and 15 lines on each page so 4 page will print. Now i want the same heading will come on each page.
Is it possible? if Yes how?
Pls reply.
Thanks,
Abhishek.Hi,
Write the heading in the top-of-page.
You will have to register the event TOP-OF-PAGE and in the corresponding form write the header.
Regards,
Ankur Parab -
Dynamic data in header on each page.
So, I would LIKE to put a text frame in a master page, which contains dynamic data (various methods have been tried, XML, Data Merge, Place TXT file) and this frame will load a different line (paragraph, xml node, row) on each page that uses the master template...
I dont think ID (CS5.5) can do this...
Basically I want to show testimonials on each page of a brochure, but load them from an external source so that they dont need to be type in on every page - and can be updated very easilly...
Ideas?
I tried putting a frame on a master page, set the options to only show a single paragraph and to show the next paragraph on the next frame... but every frame on child page, starts with the first row of data...
Im going grey here.Hi, sorry for the huge delay in getting back.
I've got a text frame place holder in the master,
I placed a .txt file into it, and see the first line/paragraph of text, and also see the red overset text icon
I have assigned a paragraph style to the frame (and also words themselves and that didnt work either).
Ive i scroll down looking at the pages using this master, they all have exactly the same: the first line of text from the placed file... -
Dynamicly creating an internal table with header line
Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping. -
Dynamic Creation of Internal table WITH HEADER LINE
Dear,
Please show me the way of creating Internal table WITH HEADER LINE dynamically..
Thanks,
Nirav<font color='blue'>Hi Parekh,
Have a look at the sample program for Dynamic internal table
This program has been developed to update any table data in the dictionary. We give table name and File name as Input fields.
<pre>
REPORT znpmmm0201.
*Types
TYPES:
BEGIN OF ty_file,
data(4096) TYPE c,
END OF ty_file.
*Type-pools
TYPE-POOLS:
truxs.
*Work areas
DATA:
wa_file TYPE ty_file.
*Internal tables
DATA:
it_file TYPE STANDARD TABLE OF ty_file,
it_data TYPE truxs_t_text_data.
DATA:
gv_dref TYPE REF TO data,
file_name TYPE string.
*FIELD-SYMBOLS
FIELD-SYMBOLS:
<gf_itab> TYPE STANDARD TABLE,
<wa> TYPE ANY.
*& Selection-screen
PARAMETERS:
p_table TYPE rsrd1-tbma_val,
p_file TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM f4_for_p_file CHANGING file_name .
*& START-OF-SELECTION
START-OF-SELECTION.
CREATE DATA gv_dref TYPE TABLE OF (p_table).
ASSIGN gv_dref->* TO <gf_itab>.
PERFORM upload_data USING file_name.
MODIFY (p_table) FROM TABLE <gf_itab>.
*& Form UPLOAD_DATA
FORM upload_data USING file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
TABLES
data_tab = it_file.
APPEND LINES OF it_file TO it_data.
CLASS cl_abap_char_utilities DEFINITION LOAD.
DATA: l_field_seperator.
l_field_seperator = cl_abap_char_utilities=>horizontal_tab.
REPLACE ALL OCCURRENCES OF '|' IN TABLE it_data WITH l_field_seperator.
CALL FUNCTION 'TEXT_CONVERT_TEX_TO_SAP'
EXPORTING
i_field_seperator = l_field_seperator
i_tab_raw_data = it_data
TABLES
i_tab_converted_data = <gf_itab>.
ENDFORM. " UPLOAD_DATA
*& Form F4_FOR_p_file
FORM f4_for_p_file CHANGING file.
DATA:
l_field_name LIKE dynpread-fieldname VALUE 'P_FILE'.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = l_field_name
IMPORTING
file_name = p_file.
file = p_file.
ENDFORM. " F4_FOR_p_file </pre>
Thanks,
Venkat.O</font> -
Repeat a Header on each page of a Report that includes expressions - Report Builder 3.0
Is there a way of repeating an header on each page of a report with the built-in expressions representing the new value on each header. Example, Page 1 is correct but page 2 - the permit number, address and Tract does not match up, it repeats all the
information from page 1.Hi KittyCat101,
According to your description, you want repeat a show with expression to show Permit Number and Address dynamically on each page. Right?
In Reporting Services, table header is not in any group row, so when you put expression with data field into header row, it will only return the first row of that data row. This is the reason why it always shows the information as Page 1.
In this scenario, we can make records group on Permit Number. Then we put the Permit Number and Address in the group header. Set page break between each group instance.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Dynamic table with radio buttons
I need to load a dynamic table with radio buttons that allow
the user to select an item in the table. I need to have it add a
radio button with a unique identifier for each table item.
For example: the table will load all of the seminars
locations available in a certain state, the radio button will allow
the user to select the city in which they would like to attend and
that value will get passed to the registration page. The value of
each radio button would be equal to the location_id in the database
for each of the locations in the table (The table includes the
date, day, venue, address, hotel info, etc. details for each city.)
When I add dynamic radio buttons and set the value to the
location_id in the database, it allows the user to select multiple
radio buttons. I cannot find any information on how to
resolve.....??
Any help is appreciated.beanieboo wrote:
> I need to load a dynamic table with radio buttons that
allow the user to select
> an item in the table. I need to have it add a radio
button with a unique
> identifier for each table item.
>
> For example: the table will load all of the seminars
locations available in a
> certain state, the radio button will allow the user to
select the city in which
> they would like to attend and that value will get passed
to the registration
> page. The value of each radio button would be equal to
the location_id in the
> database for each of the locations in the table (The
table includes the date,
> day, venue, address, hotel info, etc. details for each
city.)
>
> When I add dynamic radio buttons and set the value to
the location_id in the
> database, it allows the user to select multiple radio
buttons. I cannot find
> any information on how to resolve.....??
> Any help is appreciated.
Give each radio button the same name
<input type="radio" name=theLocation" value="<?php
$recordset['location_id'] ?>">
Mick -
Simple Dynamic Table followed by an empty Page
Hello,
I need a dynamic table with 3 Columns + 3 Rows.
The data provides an xml file.
Each table must be followed by a blank page (please see the Screenshot below).
Thanks and regards, Mike
Please feel free to send me an example via mail to [email protected]hello
mischma
Can you tell me your problem with detail.I don't understand what you want.
Regards
Zarni -
Repeating Group header on each page
Hello Everybody,
I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing so. In one of the page the group footer values are appearing without my first group values.
I belive my problem is my second group values are ending in one page and first group values are extended to next page . Can any one please hep me.if that is the case Narukonda 1, there are several sap notes dealing with this issue...please see this sap note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333133373339%7D.do]which deals with both orphaned group footers and group headers.
-
How to repeat group head on each page
I have problem with repeat group heaf on each page, I've ticked the option 'Repeat group head on each page' from the Change Group Option. But the group head didn't appear on each page when I previewed the report. Does anyone have a solution/explaination to this?
CheeersSorry Gents, I did't make my porblem clear.
To James Terry
Yes, My reports contain one or more sub-groups (only group 1's group header needs to be repeat on each page).
To Graham Cunningham
I found pages , containing only group 1's group footer summarized info, don't display group 1's group header. Just like what you said ' It will only repeat on pages that display group information'. Is this a bug or sort of default rule? What else can I do if I want the group header to repeat on each page no matter whether there is group info or not, besides moving the info from group header to pager header?
Thanks a lot.
Regards
Joseph -
Repeat Group Header On Each Page not working
Hi,
I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
Any Idea?
Thanks a lot!!Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari -
Repeat Group Header on Each Page in Subreport won't reflect when generate by JRC
Hi All,
I have a report that contain several Subreports. Inside the Subreport, there are Group Header section. I have checked the option of "Repeat Group Header on Each Page". It works fine when I preview in Crystal Report. But when I using JRC to generate the report result. The group header only display on the first page of the group details.
More, Crystal 10 Common Monthly Hot Fix (English) already installed.
Any idea?
Thanks a lot for your help!
DonaldHi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari -
How to add an image or static text in the header of EACH page of a cross-Tab report
Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald -
Dynamic Table with two columns
Hi!
i have to create a Dynamic Table with two columns having 5-5 links each with some text...... three links r based on certain conditions....they r visible only if condition is true...
if the links r not visible in this case another links take it's place & fill the cell.
links/text is coming from database.
i am using Struts with JSP IDE netbeans
Please help me
BuntyIndiai wanna do something like this
<div class="box_d box_margin_right">
<ul class="anchor-bullet">
<c:forEach items="${data.faqList}" var="item" varStatus="status"
begin="0" end="${data.faqListSize/2-1}">
<li>${item}</li>
</c:forEach>
</ul>
</div>
<div class="box_d">
<ul class="anchor-bullet">
<c:forEach items="${data.faqList}" var="item" varStatus="status"
begin="${data.faqListSize/2}" end="${data.faqListSize}">
<li>${item}</li>
</c:forEach>
</ul>
</div>
wanna divide table in two columns....if one link got off due to condition other one take it's position...
I have created a textorderedlist
Bunty
Maybe you are looking for
-
Migrate File Server data from one volume to another
I am looking for the best way to handle this situation. We have a VHD that has a 4KB cluster size that is getting close to the 16TB mark so no expanding past that due to the cluster size. In the past whenever i needed to pull this off i would preload
-
Report to display the contracts that are to expiry
Hi experts, I have to create a report to display the contracts that are to expiry for a given time period. can anybody tell me what are the tables and fields involved. the module is MM. Thanks.
-
Display problem in Mail 6.6
Hi, The other day, I had huge font problems, so I did a «Clean System Fonts Folders-» via FontExplorer X Pro. It solved my font problems, but since then, I have a display problem in Mail. Here are two screen shots: Is there a solution? Thanks for eve
-
HI guys after seeking advice from apple over the phone as to the best way to connect my macbook to my TV they advised I get a Monster ITV Link cable with a scart adapter. The picture displays by using this but in black and white, is there anything I
-
Plant Maintenance - Maintenance Order Completion Confirmation
Dear Experts, When i am confirming maint. order and checking final Confirmation Box then system confirm particular operation / order. but when i check the clear open reservation then system will not set deletion indicator of reservation. I want to ca