Dynamic tag issue

Hi,
Am rendering a jsp with a set of fields, whose tagIds have been given dynamically.
That is,
tagId="strRemarks_${container.item.strFollowupCode}"
where,
${container.item.strFollowupCode} -> is a dynamic value that will get populated when the jsp is rendered.
(NOTE: The values are getting populated properly and getting rendered well on the screen)
But, when this is done, am getting couple of javascript issues in the browser as given below:
*netui_tagIdNameMap is not defined     --          ...Instance_4{pageFlow.lstBarrierPgFour[0].lstBarrierList[6].lstRecos[0].lstFollowu...*
*missing ; before statement       --        netui_tagIdNameMap.isSelectd_D.7.1.5="portletInstance_4{pageFlow.lstBarrierPgFou...*
Need some help in resolving these js issues. Let me know if i had done anything wrong on my part.
Thanks
Giri
Edited by: Giri on May 4, 2012 1:17 AM
Edited by: Giri on May 4, 2012 1:19 AM

Hi Anony,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Slow program response, crashes when creating titles and dynamic link issues

Dear reader,
I am now trialling Adobe CC OSX with Premiere Pro and After Effects before deciding to subscribe but I am experiencing a lot of issues while working.
I am now working on an animation, but editing raw mxf files also gives crashes and slow responses/ program refreshes.
1) Slow mouse response
2) Slow program refresh while key framing visuals
3) Rendering in PP is extremely slow when AE is open in the background, when closing AE and re-initiate the render in PP it renders super fast
4) Crashes. When I overlay titles in my time line PP regularly crashes
5) Dynamic Link issues when working combined in AE and PP where file connections in the time line get lost when the AE project has too many sequences
I am curious to find out if other people are also experiencing these issues.
I am indecisive in getting the paid yearly plan or move to FCPX instead? Or should I get a new MacPro and is this model too old?
It worked fine 2 months ago, however I was still working on FCP7. After updating it is really bad working with it...
My system consist of:
MacPro mid-2010
OSX 10.9.5 (13F34) (new installation)
2x2,66Ghz 6-core Intel Xeon
24GB DDR3 ECC
Nvidia Quadro K5000, 4GB
2x PCIe SSD 1TB
2x HDD 3TB
2x HDD 2TB
Feedback is much appreciated! Best regards, Alexander

this does work for basic colour correction but not when trying to grade an entire suqence to achieve a specific style, applying a vingette or certain effects have to be done in after effects.
I want to try and get my whole sequence into after effects but preserve the edits and effects added in permier pro, is there any way to do this?
rich

How to create a dynamic tag in MII

Hi ,
I want to repeat this item tag for different segments and for each segment the <SEGNAM> will be changing and <SDATA> i am fetching from DB. Is there any way to make this item tag a dynamic tag. so that i will use the same item tag for different segments.
<SEGNAM> I am inputting the value manually for each segment.
<item>
<SEGNAM>Name1</SEGNAM>
<MANDT/>
<DOCNUM/>
<SEGNUM/>
<PSGNUM/>
<HLEVEL/>
<SDATA>11111</SDATA>
</item>
Thanks ,
Duvvurus

Sounds as if you are using link type Assign XML. Please check the [link type|http://help.sap.com/saphelp_mii121/helpdata/en/43/e80b59ad40719ae10000000a1553f6/frameset.htm]. To append a node, you can either use Append XML or Append After XML.
Michael

Dynamic TAG - Simple Transformation

Hi All,
I need work with dynamic TAGS (Elements) on Simple Transformation?
The tag should be <Invoice> or <DebitNote> depending on a Variable.
How can I achieve this?
Thanks and Regards,

We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation.

Configuring a Static WCF Port to Behave as a Dynamic Port Issue

I have WCF-Basich send port and i have developed a custom pipeline where i am resetting the "BTS.OutboundTransportLocation" based
on the input message received .So, for different message , i am setting the different value to the "OutboundTransportLocation"
by writing in context and hence making my wcf basic send port dynamic.
Issue : it seems value of "OutboundTransportlocation" is not resetting properly and using the old value set during first time.For
e.g. if first time i reset the correct url in the outboundtransport location and if second time if i set the wrong url/different url, it takes the previous url while sending the message.However,All
logging (BTS HAT and such) all seem to indicate all works fine.
Only after restarting the host it takes the latest one or correct one .It seems
"WCF BasicSend port is using caching and does not react well to changing in url's 'in flight'.
What is the solution for this ?
Manish

Hi Manish,
Please set IsDynamic property to true in your custom code. :) :) :)
Regards,
Parashu.
parashuram

Openbox with dynamic tags for windows (wmii/dwm style)

Well I tried wmii and a series of other tiling WMs and 1 concept I liked a lot, and that's the dynamic tag idea used in wmii and dwm.
In short, a single window can appear in an arbitrary number of desktops you choose, thus clever grouping of windows task-wise is possible, something like the "show on all desktops/sticky" flag, except only on some of the desktops.
The whole tiling part didn't appeal that much to me, but this concept I really liked, so now I am wondering if there are some non-tiling WMs or perhaps it is possible to emulate this in Openbox, does anyone have any ideas on this?

You need to quote each part of the command, like this:
static const char *skypecmd[] = { "apulse32", "skype", NULL };

Crystal Report Dynamic connection issue ORA-04043 Database Vendor Code 4043

HI All,
Ii am getting dynamic connection issue with Crystal Report 2008 and Business View Manager, i have Oracle database,
i have done following steps
1 Creating Dynamic Connection (including two connection XDC & YDC)
2. Creating Data Foundation (Common object available in both connection ie. stored procedure)
3. Creating Business View (with selected number of elements in business element, like firsta name, lastname)
I have verified database connectivity from Business view manager, both the connection are working fine bringing different number of rows from two different schemas (different schema but same objects in two schemas)
4. Database connectivity to different database schemas
5. Connectivity from Crystal Report (done the connectivity from the repository to business view )
6. Report Connectivity with first schema shows records
7 Report Connectivity with second schemas shows error
as follows Failed to retrive data from the database & on clicking of detail i get following error
Crystal Reports
Database Connector Error: 'ORA-04043: object HR.EXCEPTION_REPORT_SUB1_PROC [Database Vendor Code: 4043 ]'
Q first of all i need to know if dynamic connection using business view manager and crystal report technically possible or not, if yes then please let me know the solution, since we did verified with SQL database and ite work with two different database.
Q if not possible then are there any options to resolve dynamic deployment of crystal report over multiple schemas with crystal report 2008
Any help or suggestion will be appriciated, hope some one might have got similar issue
Thanks in advance
Edited by: smunir on Jul 12, 2011 9:18 AM
Edited by: smunir on Jul 12, 2011 9:41 AM
Edited by: smunir on Jul 12, 2011 9:43 AM

Hi,
When i use same credentials in Tod or sqlplus it works perfect and gives appropriate results. But when i use same credentials using business view manager, the very first connection works but the second connection does not work
Please suggest!
Regards,
<<smunir>>

Inspector Property: Dynamic tags

Hi,
I am working on an extension for Dreamweaver, currently on an
Inspector. So what I understand is, that if you use the following
tag:

It will recognize any tags that look like <mytag>, and
the js function will be called. But what if I have dynamic tags,
e.g. take this: <%email_a%> <%email_b%>
So the word before the underline "email" tells me, what kind
of Property I have, and a or b are defining an array of values,
that are going to be saved in an xml file.
What I am looking for is some sort of function that will
allow me to use regular expression to decide which Property
inspector should be called.
(everthing with %email_ in the beginning should call the
email inspector, everthing with %address_ the address inspector
etc.)
Thanks for any help in advance, I hope its possible to this.
Regards
David

"nyDavid" <[email protected]> wrote in
message
news:gd7hpa$jmi$[email protected]..
> What I am looking for is some sort of function that will
allow me to use
> regular expression to decide which Property inspector
should be called.
> (everthing with %email_ in the beginning should call the
email inspector,
> everthing with %address_ the address inspector etc.)
>
> Thanks for any help in advance, I hope its possible to
this.
Have you checked the docs for canInspectSelection()?
Massimo Foti, web-programmer for hire
Tools for ColdFusion, JavaScript and Dreamweaver:
http://www.massimocorner.com

Dynamic Tag Query with dynamic tag name.

Hi,
In our implementation we have 10+ users. Each one want to monitor only one production line ( eg. one tag value ) in the dashboard by default when they login.
I was able to design this requirement CONCEPTUALLY but facing some trouble technically.
Here is my issue.
Tagname will be coming from one of the BLS Transaction input parameters (Transaction.Tagname). I am able to build tag query using xMII Tag Query block, able to configure repeater. Here is the spot where I was struck. While assigning tag value to XML Row
i.e IlluminatorRow_0.Tagvalue = Repeater_0.Output{/Row/AssetUtil1}.
In the above assignment link it requires a hardcoded tagname. In my case it will be dynamic. I tried different ways like
1. IlluminatorRow_0.Tagvalue = Repeater_0.Output{/Row/@Transaction.Tagname}.
2.IlluminatorRow_0.Tagvalue = Repeater_0.Output{/@Transaction.Tagname}.
But no luck.
Can someone help in how to do this dynamic tagname assignment.
Thanks,
Srinivasa.

Hi Srinivas,
another option is to use "Dynamic Links" which from your sample code is what you were trying to do. For this, the proper syntax is:
Repeater_0.Output{/Row/#Transaction.Tagname#}
Make sure that the tag name you pass to the historian is the same as the tag name returned by the historian as part of the data set, and make adjustments for that. For example, some historians escape non-alphanumeric characters when they process your request (e.g. passing "abc.def 12-rt" as the tag name can be returned from the historian as "ABC.DEF_12_RT", etc.).
Hope this helps,
Sascha

My iTunes library and metadata/ID3 tags issue

Since 2010, iTunes is the only media player I use to play music. My library consists of music purchased from the iTunes Store, CD rips and stuff many artists these days release as freebies on the internet to promote a new album. Also, M4A and MP3 are the only formats I use so far.
Since iTunes, I really got into editing my library's metadata tags by hand, in order to create a custom archive which serves my preferences best. I should mention that besides iTunes being the only software I use to play my music library, it's also the only software I use to edit their metadata. Also, before iTunes – when my library was on different media players – I never bothered with editing them.
A few days ago, I found how a lot of people in forums complain about the way iTunes edits and stores metadata. So, I experimented and moved a few of my songs to other media players after editing their tags within iTunes. And indeed the tags and/or artwork were often displayed messed up and/or incorrect, some times partially and some times completely.
Some people were referring to the version of the ID3 tags being the issue, while others suggested using the "convert ID3 tags" feature. I myself am a little bit confused. "Converting the ID3 tags" wasn't available for my M4A files and once I performed it for my MP3's I didn't know which setting I should apply or what version to choose. I chose one version randomly but I'm not sure what happened.
My goal is to make my music library able to play and display my custom metadata on the majority of the popular media players. I hope that firstly this is possible and that secondly it won't be a solution which requires me going through every single song individually.
I really hope that all those years work on my library wasn't for nothing.
I'm using a MacBook running Snow Leopard 10.6.8 and my iTunes version is 10.7
While my music library is more important that my iTunes version, I do like iTunes 10 more than 11.
I apologize for any grammar mistakes, since English is not my first language. Thank you all for your time and any suggestion is welcome.

itsjamesd wrote:
Hello turingtest2 and thank you for your reply.
In response to "a possible cause of problems is multiple embedded tags", what exactly does that mean and how can I avoid doing it in the future?
Anything ripped with iTunes should get a single tag. If multiple tags in some of your older mp3 rips are the cause of the problems when you try to access the files elsewhere then you should apply the suggested remedy selectively, not to the whole library indiscriminately. Once fixed you shouldn't have the problem again unless you use different ripping software. If so check the options to ensure you generate a single ID3v2.3 tag. Downloads from elsewhere are pot luck.
If I use Convert ID3 Tags>None before converting to v2.3 as you suggested, how many times is "several times" and why do I have to do it more than once? Also, what are your thoughts on 'v2.3 vs. v2.4'?
Several is at least two, but more could be needed if a file has both v1 and v2 tags in multiple languages. If there are two tags, the first conversion to none should remove the first one, and the second conversion the second. Experiment, And stick to v2.3.
In response to "the process removes any embedded art but otherwise preserves the data that iTunes knows". All fields excluding cover art remain the same? Does that mean that I will have to start from scratch and apply new cover art individually for each album? That would be too time consuming given the fact that I embed custom art.
Yes, everything but artwork is held in the iTunes database and is restored with the final Convert ID3 Tags... v2.3. Use Doug's scripts SaveAlbumArtJpeg before you start and RestoreArtworkFromAlbumFolder afterwards to save and the restore your existing artwork.
Also, what happens with my M4A files' metadata? ID3 tags are only used for MP3's, right?
Yes, m4a/aac files have a different tag mechanism. Multiple ID3 tags is just one possible issue that you might have. You said:
So, I experimented and moved a few of my songs to other media players after editing their tags within iTunes. And indeed the tags and/or artwork were often displayed messed up and/or incorrect, some times partially and some times completely.
It might be worth going into some more detail about exactly what differences you noticed. iTunes can automatically associate (instead of embedding) artwork when it can match the album in the store which could be why some tracks didn't get artwork.
tt2

Fetching Dynamic Object issue

Hi all,
Instead of define an variable as external (due to size limitation), I decided to use session.getInstanceData to obtain the value in an instance variable. While things works well on my environment, it does not work out in the QA environment. The following is how I do it:
DynamicObject instanceData =
session.getInstanceData(instanceInfo.getId());
Map dataMap = instanceData.asMap();
//Get screening result
String resultStr = "";
boolean hasResult =
dataMap.containsKey("screeningResults");
if (hasResult){
Object resultValue =
dataMap.get("screeningResults");
resultStr = resultValue.toString();
I have also log the content of screen result inside the activity:
logMessage("leaving ... "+this.activity.name +" with screening results="+ this.screeningResults);
At my environment, I can see the content pass from the engine back to PAPI. However, on QA environment, I see the content show on the engine log (due to the logMessage) but PAPI gets empty string back.
At first I thought it is due to the "Max Instnace Size limitation", so I upped the limit to 2000kb, but it still doesn't solve the issue. So anyone got any idea what did I do wrong or forgot to handle? Thanks!
Matthew

Can I create dynamic object?Depends what you mean by "dynamic object." That term is not part of standard Java parlance, AFAIK.

ADF Table dynamic rendering issue with Transient VO

Hello All,
JDeveloper : Studio Edition Version 11.1.1.2.0 Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
ADF Business Components     11.1.1.55.36
Java(TM) Platform     1.6.0_11
Oracle IDE     11.1.1.2.36.55.36
SOA Composite Editor     11.1.1.2.0.12.16
Versioning Support     11.1.1.2.36.55.36
My page header and lines section. Header section is designed using af:panelFormLayout and lines section is constructed using af:table. Header and Lines regions are on two different Transient VOs which has no queries and updatable option in all the attributes set to always. As per the requirement after some condition, i will have to disable few column items in the lines table. For this, i have created new Transient attribute (SpecEditMode) of type Boolean in lines transient VO and i set this attribute value to Boolean.TRUE or Boolean.FALSE based on the condition. I set read only property to all af:inputText fields as #{bindings.SpecEditMode.inputValue}.
Here is the my lines table layout structure
af:panelBox
     -> af:panelCollection
     ->-> af:table.
I have one input text box to get number of rows to be added to line in the af:panelBox toolbar and a GO button to create the rows.     Here is the steps to get my issue
1. Create new rows in the Lines Transient VO based on the user input.
2. Perform business logic and lock the rows created above (set the read only propery to true using expression #{bindings.SpecEditMode.inputValue})
3. Rows created in step one gets locked when the layout gets refreshed.
4. Repeat the step 1 and now all the locked rows becomes unlocked.
To debug further on this, i drag and drop the SpecEditMode attribute as a column in the same table to verify the values during runtime. SpecEditMode attribute value for Rows created in step 1 are true which is supposed to lock the row.[But not locked the rows] and for all the newly created rows in step 4 are false.
Eventhough the SpecEditMode attribute values are correct, the fields are not locked after the first time.
Could you let me know if i am missing anything? Very much appreicate any pointers/inputs. Kindly suggest if there is any other better way to achieve the expected functionality.
Thanks
Annadurai.

When i set the read only property to #{row.bindings.SpecEditMode.inputValue}, the dynamic behaviour is works just fine.

XSLT Tag issue

Hi All,
I am using following in my XSLT mapping but XML parser is not recognizing the < tag:
<xsl:text disable-output-escaping="yes"><![CDATA[< K K >]]></xsl:text>
I have even tired the < but still it throw the XML is not well formatted error. Please advice.
Thanks.

Hi,
sorry, but this seems to be a BC-XI issue, not an MM issue.
Regards,
Edit

Weblogic 10.3.6 - Custom Tag Issue

We have created custom tag in our application. It is working fine with Tomcat and Jetty Server but on Weblogic 10.3.6 we are getting below issue:
securities.jsp:301:5: The tag handler class was not found "jsp_servlet._tags.__money_tag".
<neutrino:money placeHolderKey="label.security.faceValue" labelKey="label.security.faceValue"
                         ^------------^
securities.jsp:301:20: This attribute is not recognized.
<neutrino:money placeHolderKey="label.security.faceValue" labelKey="label.security.faceValue"
                                        ^------------^
securities.jsp:301:62: This attribute is not recognized.
<neutrino:money placeHolderKey="label.security.faceValue" labelKey="label.security.faceValue"
                                                                                  ^------^
securities.jsp:302:4: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="faceValue"
                        ^-------^
securities.jsp:302:21: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="faceValue"
                                         ^-------------^
securities.jsp:302:41: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="faceValue"
                                                             ^-----^
securities.jsp:302:53: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="faceValue"
                                                                         ^--------^
securities.jsp:302:73: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="faceValue"
                                                                                             ^-------^
securities.jsp:303:4: This attribute is not recognized.
id="faceValue" path="faceValue" tabindex="13" viewMode="${view}" maxLength="16" />
                        ^^
securities.jsp:303:19: This attribute is not recognized.
id="faceValue" path="faceValue" tabindex="13" viewMode="${view}" maxLength="16" />
                                       ^--^
securities.jsp:303:36: This attribute is not recognized.
id="faceValue" path="faceValue" tabindex="13" viewMode="${view}" maxLength="16" />
                                                        ^------^
securities.jsp:303:50: This attribute is not recognized.
id="faceValue" path="faceValue" tabindex="13" viewMode="${view}" maxLength="16" />
                                                                      ^------^
securities.jsp:303:69: This attribute is not recognized.
id="faceValue" path="faceValue" tabindex="13" viewMode="${view}" maxLength="16" />
                                                                                         ^-------^
securities.jsp:308:5: The tag handler class was not found "jsp_servlet._tags.__money_tag".
<neutrino:money placeHolderKey="label.security.price" labelKey="label.security.price"
                         ^------------^
securities.jsp:308:5: The tag handler class was not found "jsp_servlet._tags.__money_tag".
<neutrino:money placeHolderKey="label.security.price" labelKey="label.security.price"
                         ^------------^
securities.jsp:308:20: This attribute is not recognized.
<neutrino:money placeHolderKey="label.security.price" labelKey="label.security.price"
                                        ^------------^
securities.jsp:308:58: This attribute is not recognized.
<neutrino:money placeHolderKey="label.security.price" labelKey="label.security.price"
                                                                              ^------^
securities.jsp:309:4: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="price"
                        ^-------^
securities.jsp:309:21: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="price"
                                         ^-------------^
securities.jsp:309:41: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="price"
                                                             ^-----^
securities.jsp:309:53: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="price"
                                                                         ^--------^
securities.jsp:309:73: This attribute is not recognized.
mandatory="true" moneyBoxColSpan="4" colSpan="6" validators="amount" errorPath="price"
                                                                                             ^-------^
securities.jsp:310:4: This attribute is not recognized.
id="price" path="price" tabindex="14" viewMode="${view}" maxLength="16" />
                        ^^
securities.jsp:310:15: This attribute is not recognized.
id="price" path="price" tabindex="14" viewMode="${view}" maxLength="16" />
                                   ^--^
securities.jsp:310:28: This attribute is not recognized.
id="price" path="price" tabindex="14" viewMode="${view}" maxLength="16" />
                                                ^------^
securities.jsp:310:42: This attribute is not recognized.
id="price" path="price" tabindex="14" viewMode="${view}" maxLength="16" />
                                                              ^------^
securities.jsp:310:61: This attribute is not recognized.
id="price" path="price" tabindex="14" viewMode="${view}" maxLength="16" />
                                                                                 ^-------^
money.tag:2:25: The encoding specified on the page cannot be different than detected encoding for the file.
<%@ tag language="java" pageEncoding="UTF-8"%>
                        ^----------^
money.tag:2:25: The encoding specified on the page cannot be different than detected encoding for the file.
<%@ tag language="java" pageEncoding="UTF-8"%>
                        ^----------^
>

Hi.
I had similar problems with appc.
Try to remove the line "<%@ tag language="java" pageEncoding="UTF-8"%>" or at least the pageEncoding attribute from the *.tag files.
In my case, I had no idea why the compiler complained about encoding. No UTF-8 specific characters were used and both, *.jsp and *.tag set the same encoding by directive.
If you get rid of the "The encoding specified on the page cannot be different than detected encoding for the file.", you will also get rid of the "The tag handler class was not found" and the resulting errors.

Dynamic Region Issues

Jdev 11.1.1.5 - JDK 1.6_31
I have put a dynamic region on a page with 4 taskflows defined as the regions. Each taskflow is a train.
I have a bean that controls the loading (the default bean) with a load for each screen.. ie public .. myRegion1, etc... in addition to the getDynamicTF that is created by default.
public TaskFlowId getDynamicTaskFlowId() {
return TaskFlowId.parse(taskFlowId);
public String myjobFlow() {
taskFlowId = "/WEB-INF/myJobstaskFlowCall.xml#myJobstaskFlowCall";
return null;
Everything works fine - the pages load and all is OK - until I select a tab in one of the regions.
This will cause the generation of the event to get the taskflow from the bean. (getDynamicTaskFlowId)
because the bean is backing scoped - it does not know the current taskflow (lost when the bean is destroyed)
I tried to change the scope - but I get a controller error saying the backingBeanScope.DynamicRegionBean cannot be found!
can anyone tell me the location of the controller file - or how to change the scope - or how to get around this issue.

Hi,
instead of using backingBeanScope use viewScope..
and change expression wherever necessary like
in page and more important in pageDef file..
like
from
backingBeanScope.bean to viewScope.bean
Hope this helps..

Dynamic tag issue

Similar Messages

Maybe you are looking for