Dynamic TAG - Simple Transformation
Hi All,
I need work with dynamic TAGS (Elements) on Simple Transformation?
The tag should be <Invoice> or <DebitNote> depending on a Variable.
How can I achieve this?
Thanks and Regards,
We work with Microsoft Outlook, but I'm sure this could work with any email system.
This error only came from external emails - what we did in the end is to get the third party to email a particular email (email1) in our company. This is set up as a regular email account. On this email put a forward rule to email2 for a particular sender/subject. email2 is set up as POP3 so that XD1 can poll it - we also block any emails except from email1.
Doing this accomplishes a couple of things:
1) We get around the error because XI polls email2 (which has adapter settings of IMAP4 so we can see MAIL adapter attributes ie. sender, subject etc...When we originally had as POP3 we were not able to see these - but setting as IMAP4 causes the error for external emailers)
2) We have a SPAM filter - the XI email is clean from SPAM and the adapter will not have errors, as it only receives valid emails to process
3) We have a central email (email1) which is used to archive all XI emails - we use this for all email scenarios (as we also save to folder and forward in the rule)
Hope this helps your situation.
Similar Messages
-
Create xml tag dynamically within simple transformation
Hi all together,
I'm faceing the following problem:
There is a internal table provided, consisting of name/value-pairs. Something like
ls_struc-name = 'NAME1'.
ls_struc-value = 'XYZ'.
append ls_struc to lt_struc
ls_struc-name = 'CITY1'.
ls_struc-value = 'Munich'.
append ls_struc to lt_struc
and so on.
I have to create this XML (with simple transformation):
<NAME1>XYZ</NAME1>
<CITY1>Munich</CITY1>
Everythings works fine so far (tables, values etc.), but I have problems with creating the XML-Tag, e.g <NAME1> from "$line.name" within the transformation. I don't have any information about the data structure (therefore "call transaction id" does not work).
Any hint is useful!!!
Best regards,
ThomasExaple program for creating XML file from abap
REPORT z_xit_xml_dom_create.
TYPE-POOLS: ixml.
TYPES: BEGIN OF xml_line,
data(256) TYPE x,
END OF xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_ostream TYPE REF TO if_ixml_ostream,
l_renderer TYPE REF TO if_ixml_renderer,
l_document TYPE REF TO if_ixml_document.
DATA: l_element_flights TYPE REF TO if_ixml_element,
l_element_airline TYPE REF TO if_ixml_element,
l_element_flight TYPE REF TO if_ixml_element,
l_element_from TYPE REF TO if_ixml_element,
l_element_to TYPE REF TO if_ixml_element,
l_element_dummy TYPE REF TO if_ixml_element,
l_value TYPE string.
DATA: l_xml_table TYPE TABLE OF xml_line,
l_xml_size TYPE i,
l_rc TYPE i.
DATA: lt_spfli TYPE TABLE OF spfli.
DATA: l_spfli TYPE spfli.
START-OF-SELECTION.
* Fill the internal table
SELECT * FROM spfli INTO TABLE lt_spfli.
* Sort internal table
SORT lt_spfli BY carrid.
* Start filling xml dom object from internal table
LOOP AT lt_spfli INTO l_spfli.
AT FIRST.
* Creating a ixml factory
l_ixml = cl_ixml=>create( ).
* Creating the dom object model
l_document = l_ixml->create_document( ).
* Fill root node with value flights
l_element_flights = l_document->create_simple_element(
name = 'flights'
parent = l_document ).
ENDAT.
AT NEW carrid.
* Create element 'airline' as child of 'flights'
l_element_airline = l_document->create_simple_element(
name = 'airline'
parent = l_element_flights ).
* Create attribute 'code' of node 'airline'
l_value = l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'code' value = l_value ).
* Create attribute 'name' of node 'airline'
SELECT SINGLE carrname FROM scarr INTO l_value WHERE carrid EQ l_spfli-carrid.
l_rc = l_element_airline->set_attribute( name = 'name' value = l_value ).
ENDAT.
AT NEW connid.
* Create element 'flight' as child of 'airline'
l_element_flight = l_document->create_simple_element(
name = 'flight'
parent = l_element_airline ).
* Create attribute 'number' of node 'flight'
l_value = l_spfli-connid.
l_rc = l_element_flight->set_attribute( name = 'number' value = l_value ).
ENDAT.
* Create element 'from' as child of 'flight'
CONCATENATE l_spfli-cityfrom ',' l_spfli-countryfr INTO l_value.
l_element_from = l_document->create_simple_element(
name = 'from'
value = l_value
parent = l_element_flight ).
* Create attribute 'airport' of node 'from'
l_value = l_spfli-airpfrom.
l_rc = l_element_from->set_attribute( name = 'airport' value = l_value ).
* Create element 'to' as child of 'flight'
CONCATENATE l_spfli-cityto ',' l_spfli-countryto INTO l_value.
l_element_to = l_document->create_simple_element(
name = 'to'
value = l_value
parent = l_element_flight ).
* Create attribute 'airport' of node 'from'
l_value = l_spfli-airpto.
l_rc = l_element_to->set_attribute( name = 'airport' value = l_value ).
* Create element 'departure' as child of 'flight'
l_value = l_spfli-deptime.
l_element_dummy = l_document->create_simple_element(
name = 'departure'
value = l_value
parent = l_element_flight ).
* Create element 'arrival' as child of 'flight'
l_value = l_spfli-arrtime.
l_element_dummy = l_document->create_simple_element(
name = 'arrival'
value = l_value
parent = l_element_flight ).
* Create element 'type' as child of 'flight'
CASE l_spfli-fltype.
WHEN 'X'.
l_value = 'Charter'.
WHEN OTHERS.
l_value = 'Scheduled'.
ENDCASE.
l_element_dummy = l_document->create_simple_element(
name = 'type'
value = l_value
parent = l_element_flight ).
ENDLOOP.
IF sy-subrc NE 0.
MESSAGE 'No data into db table ''spfli'', please run program ''SAPBC_DATA_GENERATOR'' with transaction ''SA38''' TYPE 'E'.
ENDIF.
* Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
* Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
* Saving the XML document
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = 'c:\temp\flights.xml'
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
XML to ABAP Problems with many attributes in one Tag (Simple Transform)
Hi
i have a XML-Dataset like this. (It's a sample, in originl there are more fields under <Faktura> and more <Faktura>.) My Problem is reading the Attributes.
<?xml version="1.0" encoding="utf-8"?>
<Fakturen>
<Faktura AVnr="123456789" Amt="100" Lang="1" Nr="1209" RechnungsTyp="B" Status="7" Waehrung="CHF" Year="2011" ZahlungsTyp="B"/>
</Faktura>
</Fakturen>
In the Tag "Faktura are many Attributes. How can i read this. I have try this with this code and many other variation. But it does not work.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates" xmlns:ddic="http://www.sap.com/abapxml/types/dictionary" xmlns:def="http://www.sap.com/abapxml/types/defined">
<tt:root name="FAKTUREN" type="ddic:ZKSO_HRNET_INTERFACE"/>
<tt:template>
<Fakturen>
<Faktura>
<tt:attribute name="AVNR" value-ref=".FAKTUREN.FAKTURA.AVNR"/>
<tt:attribute name="AMT" value-ref=".FAKTUREN.FAKTURA.AMT"/>
<tt:attribute name="LANG" value-ref=".FAKTUREN.FAKTURA.LANG"/>
<tt:attribute name="NR" value-ref=".FAKTUREN.FAKTURA.NR"/>
<tt:attribute name="RECHNUNGSTYP" value-ref=".FAKTUREN.FAKTURA.RECHNUNGSTYP"/>
<tt:attribute name="STATUS" value-ref=".FAKTUREN.FAKTURA.STATUS"/>
<tt:attribute name="WAEHRUNG" value-ref=".FAKTUREN.FAKTURA.WAEHRUNG"/>
<tt:attribute name="YEAR" value-ref=".FAKTUREN.FAKTURA.YEAR"/>
</Faktura>
</Fakturen>
</tt:template>
</tt:transform>
Thanks for help
Stefan
Edited by: Franziska Madl on Mar 2, 2011 2:39 PMHi
Thank you for your answer. The function module SMUM_XML_PARSE is a good way to Read a XML. Now I have found the Correct way with simple transfer and it works with an array too.
many regards
Stefan
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates" xmlns:ddic="http://www.sap.com/abapxml/types/dictionary" xmlns:def="http://www.sap.com/abapxml/types/defined">
<tt:root name="FAKTUREN" type="ddic:ZKSO_HRNET_INTERFACE"/>
<tt:template>
<Fakturen>
<tt:loop ref=".FAKTUREN.FAKTURA">
<Faktura>
<tt:attribute name="AVnr" value-ref="AVNR"/>
<tt:attribute name="Amt" value-ref="AMT"/>
<tt:attribute name="Lang" value-ref="LANG"/>
<tt:attribute name="Nr" value-ref="NR"/>
<tt:attribute name="RechnungsTyp" value-ref="RECHNUNGSTYP"/>
<tt:attribute name="Status" value-ref="STATUS"/>
<tt:attribute name="Waehrung" value-ref="WAEHRUNG"/>
<tt:attribute name="Year" value-ref="YEAR"/>
<tt:attribute name="ZahlungsTyp" value-ref="ZAHLUNGSTYP"/>
</Faktura>
</tt:loop>
</Fakturen>
</tt:template>
</tt:transform> -
Simple Transformation XML to ABAP Content of tag with subtrees to string field
Hi,
I have an requirement in which I have to do a transformation from an XML file to an structure.
I need get the value of a tag that have subtrees and move that to a field in my structure.
Example:
<TAG1>value1</TAG1>
<TAG2>value2</TAG2>
<TAG3>
<TAG4>value4</TAG4>
<TAG5>value5</TAG5>
</TAG3>
Result expected in ABAP Structure:
field1 -> tag1
field2 -> tag2
field3 -> <TAG4>value4</TAG4><TAG5>value5</TAG5>
The contents of the tag TAG3 is variable, so I want to store it as a string.
Can I make this with Simple Transformation?
In my tests I can move only the value of each child tag for the given field structure.
This syntax dont work:
<TAG3 tt:value-ref="STRUCTURE.FIELD3"/>
Thanks and Regards,
Miguel MottaHi Miguel
Have a look at below snippets. Here I have tried to escape the text inside TAG3 so that it gets treated as single node during transformation.
ABAP code
DATA: BEGIN OF result,
col1 TYPE string,
col2 TYPE string,
col3 TYPE string,
END OF result.
DATA: xml_string TYPE string VALUE
'<ROOT> <TAG1>value1</TAG1> <TAG2>value2</TAG2> <TAG3> <TAG4>value4</TAG4> <TAG5>value5</TAG5> </TAG3> </ROOT>',
part1 TYPE string,
part2 TYPE string,
part3 TYPE string.
* Escape the text inside TAG3 tag
FIND REGEX '(.*<TAG3>)(.*)(</TAG3>.*)' IN xml_string SUBMATCHES part1 part2 part3.
IF sy-subrc EQ 0.
part2 = escape( val = part2 format = cl_abap_format=>e_xml_text ).
* REPLACE ALL OCCURRENCES OF '<' IN part2 WITH '<'.
* REPLACE ALL OCCURRENCES OF '>' IN part2 WITH '>'.
xml_string = part1 && part2 && part3.
ENDIF.
TRY.
* Display xml
cl_abap_browser=>show_xml( EXPORTING xml_string = xml_string ).
* Deserialization
CALL TRANSFORMATION zmtest
SOURCE XML xml_string
RESULT para = result.
* Check result
WRITE:/ 'COL1=', result-col1,
/ 'COL2=', result-col2,
/ 'COL3=', result-col3.
CATCH cx_st_error.
* Error handling
MESSAGE 'Error in Simple Transformation'
TYPE 'I' DISPLAY LIKE 'E'.
ENDTRY.
Transformation code
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates" template="temp" version="0.1">
<tt:root name="PARA"/>
<tt:template name="temp">
<ROOT>
<TAG1>
<tt:value ref="PARA.COL1"/>
</TAG1>
<TAG2>
<tt:value ref="PARA.COL2"/>
</TAG2>
<TAG3>
<tt:value ref="PARA.COL3"/>
</TAG3>
</ROOT>
</tt:template>
</tt:transform> -
How to skip XML tags in Simple transformation
Hi,
I am trying to convert an XML file to ABAP code using Simple Transformations.
I tired converting a small XML file to ABAP using it and it worked fine.
The problem is that the number of tags in the XML file I now want to parse is huge (over 200).
Is there any way that for the tag in XML corresponding tag is not created in ST? Is there any conditional tag to achieve this?
Also, is Simple Transformation a better way of parsing in such a scenario over XSLT and DOM parser?
Thanks and Regards,
Neha
Edited by: Neha Anand on Jun 2, 2008 1:19 PMHi Raja,
I have already looked through the code snippets and I am able to write a CALL TRANSFORMATION.
I want to find out if the number of tags is huge then if there is any way that some tags can be skipped for matching tags in XML which anyhow I dont need for manipulation.
Thanks and Regards,
Neha -
Dynamically name the worksheet in a simple transformation
we have a workbook created through simple transformation with multiple worksheets and we are stuck because we could not name the work sheets dynamically. please help.
Temporarily see if the problem isn't due to too big an Office database file by quiting Outlook, and moving the Microsoft User Data folder out of the Users -> Documents folder to the desktop. Make sure to setup your e-mail as IMAP on server so it remains on server once you move the data back.
Also how big is your hard drive and how full is it?
Are you using any system maintenance tools? These can cause corruption. -
Simple Transformation - Optional Tag
Hi,
I receive an XML from an called web service. Depending on the ws input I receive a diferent result XML.
Result 1:
<LdPat3D>
<Blocks>
<Block>
<Block>
<Blocks/>
</LdPat3D>
Result 2:
<LdPat3D/>
The simple transformation works for Result 1, but not for Result 2. In case of Result 2 a CX_ST_MATCH_ELEMENT exception
occurs mentioning that element-start blocks is expected and element-end: "LdPat3D" [ ] is read.
Could you please tell me how to handle this in my simple transformation?
Thank you and best regards, EdgarHi Edgar,
you should define <blocks> element as optional using <tt:cond>
More information : http://help.sap.com/saphelp_nw70/helpdata/en/0c/402040abf2c442e10000000a1550b0/frameset.htm
BR
Sandra -
Problem with Simple Transformation
Hi to all
I am working with ST, and have the following issue:
I have a highly nested xml structure, and, when I execute a abap program with a myself ST, only the last one data is passed to internal tables.
I want to know: how can I do to get that all the information from xml file to store to internal tables but not only the latest information structure?
For example I have the following xml file, and only the last occurence of <PSMService> is update in internal tables.
Thank you very much for your help.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<InvoicingInformation>
<Services>
<PSMServices>
<PSMService ContractCode="STF0996" InvoicePeriod="2011-01-31T00:00:00-06:00" ReceiptPointCode="347">
<Transactions>
<Transaction ReceiptPointCode="347" DeliveryPointCode="167" ExitTramoCode="15" SectorCode="SECTP_GNV">
</Transaction>
</Transactions>
<DailyCharges>
<DailyCharge ChargeCode="CHRGS_FIJO" Date="2011-01-01T00:00:00-06:00" Quantity="93" QuantityUnit="KPC">
</DailyCharge>
<DailyCharge ChargeCode="CHRGS_FIJO_COP" Date="2011-01-01T00:00:00-06:00" Quantity="93" QuantityUnit="KPC">
</DailyCharge>
</DailyCharges>
<AggregateCharges>
<AggregateCharge ChargeCode="CHRGS_DESVIO" IsTiered="false" Quantity="0" QuantityUnit="KPC" CurrencyCode="COP">
</AggregateCharge>
<AggregateCharge ChargeCode="CHRGS_DESVIO_US$" IsTiered="false" Quantity="0" QuantityUnit="KPC" CurrencyCode="USD">
</AggregateCharge>
</AggregateCharges>
</PSMService>
<PSMService ContractCode="STF0996" InvoicePeriod="2011-01-31T00:00:00-06:00" ReceiptPointCode="347">
<Transactions>
<Transaction ReceiptPointCode="347" DeliveryPointCode="192A" ExitTramoCode="16" SectorCode="SECTP_GNV">
</Transaction>
</Transactions>
<DailyCharges>
<DailyCharge ChargeCode="CHRGS_FIJO" Date="2011-01-01T00:00:00-06:00" Quantity="112" QuantityUnit="KPC">
</DailyCharge>
<DailyCharge ChargeCode="CHRGS_FIJO_COP" Date="2011-01-01T00:00:00-06:00" Quantity="112" QuantityUnit="KPC">
</DailyCharge>
</DailyCharges>
<AggregateCharges>
<AggregateCharge ChargeCode="CHRGS_FIJO" IsTiered="false" Quantity="560" QuantityUnit="KPC" CurrencyCode="USD">
</AggregateCharge>
<AggregateCharge ChargeCode="CHRGS_FIJO_COP" IsTiered="false" Quantity="560" QuantityUnit="KPC" CurrencyCode="COP">
</AggregateCharge>
</AggregateCharges>
</PSMService>
<PSMService ContractCode="STF0996" InvoicePeriod="2011-01-31T00:00:00-06:00" ReceiptPointCode="360">
<Transactions>
<Transaction ReceiptPointCode="260A" DeliveryPointCode="167" ExitTramoCode="15" SectorCode="SECTP_GNV">
</Transaction>
<Transaction ReceiptPointCode="260B" DeliveryPointCode="168" ExitTramoCode="15" SectorCode="SECTP_GNV">
</Transaction>
</Transactions>
<DailyCharges>
<DailyCharge ChargeCode="CHRGS_DESVIO" Date="2011-01-01T00:00:00-06:00" Quantity="0" QuantityUnit="KPC">
</DailyCharge>
<DailyCharge ChargeCode="CHRGS_DESVIO_US$" Date="2011-01-01T00:00:00-06:00" Quantity="0" QuantityUnit="KPC">
</DailyCharge>
</DailyCharges>
<AggregateCharges>
<AggregateCharge ChargeCode="CHRGS_DESVIO" IsTiered="false" Quantity="0" QuantityUnit="KPC" CurrencyCode="COP">
</AggregateCharge>
<AggregateCharge ChargeCode="CHRGS_DESVIO_US$" IsTiered="false" Quantity="0" QuantityUnit="KPC" CurrencyCode="USD">
</AggregateCharge>
</AggregateCharges>
</PSMService>
</PSMServices>
</Services>
</InvoicingInformation>
Edited by: Thomas Zloch on May 10, 2011 12:46 PM - code tags addedHi Charles.
Thank you.
This is a piece of the simple transformation:
<Services>
<!-- PSM Services -->
<PSMServices tt:extensible="deep-dynamic">
<tt:loop name="PSMService" ref="TABLA_PSM_SERVICES">
<PSMService tt:extensible="deep-dynamic">
<tt:attribute name="ContractCode" value-ref="$PSMService.ContractCode"/>
<tt:attribute name="InvoicePeriod" value-ref="$PSMService.InvoicePeriod"/>
<tt:attribute name="ReceiptPointCode" value-ref="$PSMService.ReceiptPointCode"/>
<tt:attribute name="DeliveryPointCode" value-ref="$PSMService.DeliveryPointCode"/>
<tt:attribute name="ExitTramoCode" value-ref="$PSMService.ExitTramoCode"/>
<tt:attribute name="SectorCode" value-ref="$PSMService.SectorCode"/>
<tt:attribute name="MarketCode" value-ref="$PSMService.MarketCode"/>
<tt:attribute name="TransportMarketCode" value-ref="$PSMService.TransportMarketCode"/>
<tt:attribute name="InvoiceBy" value-ref="$PSMService.InvoiceBy"/>
<tt:attribute name="MarketCapacity" value-ref="$PSMService.MarketCapacity"/>
<tt:attribute name="MarketCapacityUnitCode" value-ref="$PSMService.MarketCapacityUnitCode"/>
<tt:attribute name="SAPMaterialCode" value-ref="$PSMService.SAPMaterialCode"/>
<Transactions tt:extensible="deep-dynamic">
<tt:loop name="Transaction" ref=".TABLA_PSM_TRANSACTIONS">
<Transaction tt:extensible="deep-dynamic">
<tt:attribute name="ReceiptPointCode" value-ref="$Transaction.ReceiptPointCode"/>
<tt:attribute name="DeliveryPointCode" value-ref="$Transaction.DeliveryPointCode"/>
<tt:attribute name="ExitTramoCode" value-ref="$Transaction.ExitTramoCode"/>
<tt:attribute name="SectorCode" value-ref="$Transaction.SectorCode"/>
<tt:attribute name="MarketCode" value-ref="$Transaction.MarketCode"/>
<tt:attribute name="MarketCapacity" value-ref="$Transaction.MarketCapacity"/>
<tt:attribute name="Firm" value-ref="$Transaction.Firm"/>
<tt:attribute name="Overrun " value-ref="$Transaction.Overrun "/>
<tt:attribute name="UnitCode" value-ref="$Transaction.UnitCode"/>
<tt:attribute name="SAPMaterialCode" value-ref="$Transaction.SAPMaterialCode"/>
</Transaction>
</tt:loop>
</Transactions>
<DailyCharges tt:extensible="deep-dynamic">
<tt:loop name="DailyCharge" ref=".TABLA_PSM_DAILYCHARGES">
<DailyCharge tt:extensible="deep-dynamic">
<tt:attribute name="ChargeCode" value-ref="$DailyCharge.ChargeCode"/>
<tt:attribute name="Date" value-ref="$DailyCharge.Date"/>
<tt:attribute name="Quantity" value-ref="$DailyCharge.Quantity"/>
<tt:attribute name="QuantityUnit" value-ref="$DailyCharge.QuantityUnit"/>
</DailyCharge>
</tt:loop>
</DailyCharges>
<AggregateCharges tt:extensible="deep-dynamic">
<tt:loop name="AggregateCharge" ref=".TABLA_PSM_AGGREGATECHARGES">
<AggregateCharge tt:extensible="deep-dynamic">
<tt:attribute name="ChargeCode" value-ref="$AggregateCharge.ChargeCode"/>
<tt:attribute name="IsTiered" value-ref="$AggregateCharge.IsTiered"/>
<tt:attribute name="Quantity" value-ref="$AggregateCharge.Quantity"/>
<tt:attribute name="QuantityUnit" value-ref="$AggregateCharge.QuantityUnit"/>
<tt:attribute name="CurrencyCode" value-ref="$AggregateCharge.CurrencyCode"/>
<tt:attribute name="TariffRate" value-ref="$AggregateCharge.TariffRate"/>
<tt:attribute name="TariffRateUnit" value-ref="$AggregateCharge.TariffRateUnit"/>
</AggregateCharge>
</tt:loop>
</AggregateCharges>
</PSMService>
</tt:loop>
</PSMServices>
</Services>
Edited by: Thomas Zloch on May 10, 2011 12:47 PM - code tags added -
Simple Transformation Exception
Hello,
I am tying to map XML to ABAP(deserialize) but receive a CX_ST_MATCH_ELEMENT Exception.
Below is my Simple Transformation, the calling method, and the XML snippet I am tying to deserialize.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ROOT"/>
<tt:template>
<SndgInst>
<tt:value ref="ROOT"/>
</SndgInst>
</tt:template>
</tt:transform>
method PARSE_XML.
DATA:
sndginst(10) type c value ' ',
l_exception_error TYPE REF TO cx_st_error.
parse the xml content
TRY.
CLEAR: l_exception_error.
CALL TRANSFORMATION (i_st_name)
SOURCE XML i_xml_string
RESULT root = sndginst.
catch exception
CATCH: cx_st_error INTO l_exception_error.
ENDTRY.
endmethod.
<S2SCTScf:SndgInst ymlns:S2SCTScf="urn:S2SCTScf:xsd:$SCTScfBlkCredTrf">ZYDOFRP0</S2SCTScf:SndgInst>
I have tried adding a reference for the namespace 'S2SCTScf' but receive the same exception.
I think it must have something to do with the namespace prefix and I have tried several different versions of the Simple transformation, such as <S2SCTSCF:SndgInst> as my tag reference, to no avail.
The exception class does not provide a lot of useful information and since you cannot debug a Simple Transformation it is a guessing game.
Thanks in advance for your help.
Best Regards,
Mark Lengel
Edited by: Mark Lengel on Mar 31, 2009 11:32 AMI've exactly the same problem.
My XML Input Stream contains Namespaces in the root element for e.g.
<Measurement xmlns="es.xxx.com" xmlns:ns2="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/1998/Math/MathML">
The Simple Transformation always raise an CX_ST_MATCH_ELEMENT Exception.
If i delete the xmlns declarations, the Element will be found and everything is o.k.
I've also tried to avoid this by adding the tt:extensible="deep-dynamic" attribute but it doesn't matter.
<tt:template>
<Measurement tt:extensible="deep-dynamic">
I use WebAS 6.40, ERP 2004.
I hope the Community could help us. Maybe it's bug in the XML Libraries.. etc..
Kind Regards
Chris -
Simple Transformation XML to ABAP - error CX_ST_MATCH_ELEMENT
Hi all,
I have a problem with a transformation from xml to abap. My XML file (taken from a pdf file) is
<?xml version="1.0" encoding="iso-8859-1" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<NETWORK>E60000000000</NETWORK>
<OPERAZIONE>0010</OPERAZIONE>
- <TABELLA>
- <ROW xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:dataNode="dataGroup">
<MANDT>300</MANDT>
<NETWORK>E60000000000</NETWORK>
<OPERAZIONE>0010</OPERAZIONE>
<ID_ACT>1</ID_ACT>
<DESC_ACT>ATTIVITÀ1</DESC_ACT>
<LONG_TXT></LONG_TXT>
<MAKE_BUY></MAKE_BUY>
<WP></WP>
<EVENTO_TECH></EVENTO_TECH>
<TIPO_LEGAME></TIPO_LEGAME>
<CONSEGNA></CONSEGNA>
</ROW>
- <ROW xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:dataNode="dataGroup">
<MANDT>300</MANDT>
<NETWORK>E60000000000</NETWORK>
<OPERAZIONE>0010</OPERAZIONE>
<ID_ACT>2</ID_ACT>
<DESC_ACT>ATTIVITÀ2</DESC_ACT>
<LONG_TXT>ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2</LONG_TXT>
<MAKE_BUY>M</MAKE_BUY>
<WP></WP>
<EVENTO_TECH></EVENTO_TECH>
<TIPO_LEGAME></TIPO_LEGAME>
<CONSEGNA></CONSEGNA>
</ROW>
</TABELLA>
</asx:values>
</asx:abap>
my transformation is
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ROOT"></tt:root>
<tt:root name="NETWORK"></tt:root>
<tt:root name="OPERAZIONE"></tt:root>
<tt:template>
<abap>
<values>
<network>
<tt:value ref="NETWORK"></tt:value>
</network>
<operazione>
<tt:value ref="OPERAZIONE"></tt:value>
</operazione>
<tabella>
<tt:loop ref=".ROOT" name="line">
<mandt>
<tt:value ref="$line.mandt"></tt:value>
</mandt>
<network>
<tt:value ref="$line.network"></tt:value>
</network>
<OPERAZIONE>
<tt:value ref="$line.OPERAZIONE"></tt:value>
</OPERAZIONE>
<ID_ACT>
<tt:value ref="$line.ID_ACT"></tt:value>
</ID_ACT>
<DESC_ACT>
<tt:value ref="$line.DESC_ACT"></tt:value>
</DESC_ACT>
<LONG_TXT>
<tt:value ref="$line.LONG_TXT"></tt:value>
</LONG_TXT>
<MAKE_BUY>
<tt:value ref="$line.MAKE_BUY"></tt:value>
</MAKE_BUY>
<WP>
<tt:value ref="$line.WP"></tt:value>
</WP>
<EVENTO_TECH>
<tt:value ref="$line.EVENTO_TECH"></tt:value>
</EVENTO_TECH>
<TIPO_LEGAME>
<tt:value ref="$line.TIPO_LEGAME"></tt:value>
</TIPO_LEGAME>
<CONSEGNA>
<tt:value ref="$line.CONSEGNA"></tt:value>
</CONSEGNA>
</tt:loop>
</tabella>
</values>
</abap>
</tt:template>
</tt:transform>
when I execute my code
the system dump with this error
ST_MATCH_FAIL
excep. CX_ST_MATCH_ELEMENT
TRY.
CALL TRANSFORMATION ('ZT_NETWORK')
SOURCE XML lv_xml_data_string
RESULT network = l_network
operazione = l_operazione
root = it_data_tmp.
CATCH cx_sy_conversion_data_loss .
CATCH cx_xslt_exception INTO xslt_error.
xslt_message = xslt_error->get_text( ).
WRITE:/ xslt_message .
ENDTRY.
Any help?
thanks
enzoEnzo Porcasi wrote:
> I have a problem with a transformation from xml to abap. My XML file (taken from a pdf file) is
>
<?xml version="1.0" encoding="iso-8859-1" ?>
> <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
> <asx:values>
Your XML is strange, it looks like a mix of pdf form content (xfa) and identity transformation (asx).
Could you explain more ?
Anyway, I tried to find out the errors (not only cx_st_match_element, that was just a catch missing), it works with the following program. Here are the main issues I have found :
- always catch exception class cx_st_error when you use simple transformations (it contains cx_st_match_element and all other simple transformation exceptions)
- xml "asx:abap" and "asx:values" in your input XML are useless, they are only used by identity transformation ("ID"); you may keep them if you want, but I advise you to see why they are in the xml !
- Use same case in your tags (if xml contains in the transformation so that it corresponds to the input XML
- I renamed all abap names with prefix ABAP_ so that to clearly differentiate xml tags and abap field names (so that it is more easy to understand, for every sdn reader; I hope it will help as I didn't find many threads in the forum).
Simple transformation :
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ABAP_NETWORK"></tt:root>
<tt:root name="ABAP_OPERAZIONE"></tt:root>
<tt:root name="ABAP_TABELLA"></tt:root>
<tt:template>
<ROOT>
<NETWORK>
<tt:value ref=".ABAP_NETWORK"></tt:value>
</NETWORK>
<OPERAZIONE>
<tt:value ref=".ABAP_OPERAZIONE"></tt:value>
</OPERAZIONE>
<TABELLA>
<tt:loop ref=".ABAP_TABELLA" name="line">
<ROW>
<MANDT>
<tt:value ref="$line.ABAP_MANDT"></tt:value>
</MANDT>
<NETWORK>
<tt:value ref="$line.ABAP_NETWORK"></tt:value>
</NETWORK>
<OPERAZIONE>
<tt:value ref="$line.ABAP_OPERAZIONE"></tt:value>
</OPERAZIONE>
<ID_ACT>
<tt:value ref="$line.ABAP_ID_ACT"></tt:value>
</ID_ACT>
<DESC_ACT>
<tt:value ref="$line.ABAP_DESC_ACT"></tt:value>
</DESC_ACT>
<LONG_TXT>
<tt:value ref="$line.ABAP_LONG_TXT"></tt:value>
</LONG_TXT>
<MAKE_BUY>
<tt:value ref="$line.ABAP_MAKE_BUY"></tt:value>
</MAKE_BUY>
<WP>
<tt:value ref="$line.ABAP_WP"></tt:value>
</WP>
<EVENTO_TECH>
<tt:value ref="$line.ABAP_EVENTO_TECH"></tt:value>
</EVENTO_TECH>
<TIPO_LEGAME>
<tt:value ref="$line.ABAP_TIPO_LEGAME"></tt:value>
</TIPO_LEGAME>
<CONSEGNA>
<tt:value ref="$line.ABAP_CONSEGNA"></tt:value>
</CONSEGNA>
</ROW>
</tt:loop>
</TABELLA>
</ROOT>
</tt:template>
</tt:transform>
Program and XML included :
REPORT zsro2.
DATA l_network TYPE string.
DATA l_operazione TYPE string.
DATA : BEGIN OF lt_data_tmp OCCURS 0,
abap_mandt TYPE string,
abap_network TYPE string,
abap_operazione TYPE string,
abap_id_act TYPE string,
abap_desc_act TYPE string,
abap_long_txt TYPE string,
abap_make_buy TYPE string,
abap_wp TYPE string,
abap_evento_tech TYPE string,
abap_tipo_legame TYPE string,
abap_consegna TYPE string,
END OF lt_data_tmp.
DATA xslt_error TYPE REF TO cx_xslt_exception.
DATA lo_st_error TYPE REF TO cx_st_error.
DATA lv_xml_data_string TYPE string.
DATA xslt_message TYPE string.
DEFINE conc.
concatenate lv_xml_data_string &1 into lv_xml_data_string.
END-OF-DEFINITION.
*conc '<?xml version="1.0" encoding="iso-8859-1" ?>'.
*conc '<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">'.
*conc ' <asx:values>'.
conc ' <ROOT>'.
conc ' <NETWORK>E60000000000</NETWORK> '.
conc ' <OPERAZIONE>0010</OPERAZIONE> '.
conc ' <TABELLA>'.
conc ' <ROW xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:dataNode="dataGroup">'.
conc ' <MANDT>300</MANDT> '.
conc ' <NETWORK>E60000000000</NETWORK> '.
conc ' <OPERAZIONE>0010</OPERAZIONE> '.
conc ' <ID_ACT>1</ID_ACT> '.
conc ' <DESC_ACT>ATTIVITÀ1</DESC_ACT> '.
conc ' <LONG_TXT></LONG_TXT> '.
conc ' <MAKE_BUY></MAKE_BUY> '.
conc ' <WP></WP> '.
conc ' <EVENTO_TECH></EVENTO_TECH> '.
conc ' <TIPO_LEGAME></TIPO_LEGAME> '.
conc ' <CONSEGNA></CONSEGNA> '.
conc ' </ROW>'.
conc ' <ROW xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/" xfa:dataNode="dataGroup">'.
conc ' <MANDT>300</MANDT> '.
conc ' <NETWORK>E60000000000</NETWORK> '.
conc ' <OPERAZIONE>0010</OPERAZIONE> '.
conc ' <ID_ACT>2</ID_ACT> '.
conc ' <DESC_ACT>ATTIVITÀ2</DESC_ACT> '.
conc ' <LONG_TXT>ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2 ATTIVITÀ2</LONG_TXT> '.
conc ' <MAKE_BUY>M</MAKE_BUY> '.
conc ' <WP></WP> '.
conc ' <EVENTO_TECH></EVENTO_TECH> '.
conc ' <TIPO_LEGAME></TIPO_LEGAME> '.
conc ' <CONSEGNA></CONSEGNA> '.
conc ' </ROW>'.
conc ' </TABELLA>'.
conc ' </ROOT>'.
*conc ' </asx:values>'.
*conc '</asx:abap>'.
DATA lv_xml_data_string_2 TYPE string.
TRY.
CALL TRANSFORMATION zsro
SOURCE
XML lv_xml_data_string
RESULT
abap_network = l_network
abap_operazione = l_operazione
abap_tabella = lt_data_tmp[].
CATCH cx_sy_conversion_data_loss .
CATCH cx_st_error INTO lo_st_error.
xslt_message = lo_st_error->get_text( ).
WRITE:/ xslt_message .
CATCH cx_xslt_exception INTO xslt_error.
xslt_message = xslt_error->get_text( ).
WRITE:/ xslt_message .
ENDTRY.
BREAK-POINT. -
Group columns in Excel using XSLT simple transformation
Hi All,
I have to group a few columns in the excel so that they can be expanded or collapsed. I am transforming an internal table into XML using Simple transformation. In this XSLT, I need to add the code to group the particular columns together in the final excel.
Can any one please help me in acheiving the columns grouped together.
Thanks and Regards,
Vishnu.
Edited by: Vishnu Kare on Mar 24, 2011 7:22 AMHi Vishnu, I am also using simple transformations (not XSLT) to create XML excel from SAP data. I always create a template excel workbook from excel by saving it as XML file. This XML can be pasted into the SAP transformation without completely understanding the Microsoft excel syntax. The dynamic SAP data then can be included to the XML in the transformation.
Regards Jack -
Simple Transformation - Conditions
Hello,
I'm stuck with my Simple Transformation and hope to find some help here. The following XML is a short example of my input.
<ONIXmessage>
<product>
<a001>A5769069</a001>
<a002>01</a002>
<productidentifier>
<b221>02</b221>
<b244>1934435112</b244>
</productidentifier>
<productidentifier>
<b221>03</b221>
<b244>9781934435113</b244>
</productidentifier>
</product>
<product>
<a001>A5769126</a001>
<a002>03</a002>
<productidentifier>
<b221>02</b221>
<b244>383101213X</b244>
</productidentifier>
<productidentifier>
<b221>03</b221>
<b244>9783831012138</b244>
</productidentifier>
<productidentifier>
<b221>01</b221>
<b233>LI</b233>
<b244>3429113</b244>
</productidentifier>
</product>
</ONIXmessage>
As you can see there are several <productidentifier> tags for each product. I need to store the value of the <b244> tag but only if the value of the <b221> tag is '03'.
I guess I need to work with the <tt:cond> statement but I don't manage to create the transformation.
Any suggestions?
Regards
StephanHI Anna,
In alphabetic sequence 210 falls in between 2000 ans 3000.
You can use a numeric field to get the required result.
<b>data: v_numc(4) type n.
v_numc = p0001-btrtl.</b>
IF p0001-btrtl = '1000' OR <b>v_numc</b> BETWEEN '2000' AND '2999'.
IF p0001-kostl in p_rccode.
MOVE p0001-kostl TO stab-kostl.
move: 1 to ok1.
ENDIF.
ELSEIF p0001-btrtl in p_btrtl.
move: 1 to ok1.
concatenate '0000000' p0001-btrtl into stab-kostl.
condense stab-kostl.
ENDIF.
Regards,
ravi
P.S: check this sample program to demonstrate the same
data: v_char(4) type n value '210'.
if v_char between '2000' and '3000'.
Write:/ 'Lies'.
else.
write:/ 'Doesnt fall'.
endif.
output: 'Doesnt fall' -
Simple transformation: dump ST_MATCH_FAIL
Hello,
I have written a simple transformation which works fine.
However, I get the dump ST_MATCH_FAIL whenever the tags in the XML are not in the order specified in the ST or if the XML contains tags other than the tags specified in the ST.
Is there a way to prevent this dump? The ST should just ignore order of fields and fields which are not stated in the ST.
This is the ST
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="DocRoot"/>
<tt:template>
<DocRoot>
<tt:loop name="wa_iram" ref=".DocRoot">
<entry>
<personnel_num>
<tt:value ref="$wa_iram.pernr"/>
</personnel_num>
<email>
<tt:value ref="$wa_iram.email"/>
</email>
<ldap_id>
<tt:value ref="$wa_iram.ldap_id"/>
</ldap_id>
</entry>
</tt:loop>
</DocRoot>
</tt:template>
</tt:transform>
Thanks
KoenThat particular example has no conditional operators specified in the template. You have to identify the conditional frequency of the elements in order to stop dumps like that...
-
Questions concerning ST Simple Transformations
I got some questions concerning Simple Transformations:
1.) When editing a simple transformation, how to insert comments? In pure ABAP, a comment line must have as asterisk in the first column...
2.) I use <tt:loop>...</tt:loop> and want to use the index of the currently processed entry, like SY-TABIX when implementing a "LOOP AT itab" in ABAP. Is there a way?
Thanks for your answer, points will be rewared...
-MIKEHi Jack, please find some sample coding below that will solve your issue:
<tt:cond check="not-initial(ref('E1EDL20.INCO1'))">
<INCO1 tt:value-ref="E1EDL20.INCO1"/>
</tt:cond>
With the simple transformation tt cond statment you can make an XML tag optional. In below example during deserialisation xml tag <INCO1> will be skipped when not availabke in the xml and SAP data E1EDL20.INCO1 will not be filled by the transformation.
Regards. Please give points when usefull ! -
Optional XML fields in Simple transformations (ST)
Hi, I am using Simple Transformation (ST) to convert an XML file into ABAP data. In my XML file some XML tags are optional: sometimes they are available in the file, sometimes they are not. I can not find out how to define a ST for this.
Either the XML fields are in the ST definition and then these field should also be in the XML file or
the XML fields are not in the ST definition and then these fields are not allowed in the XML.
Regards jackHi Jack, please find some sample coding below that will solve your issue:
<tt:cond check="not-initial(ref('E1EDL20.INCO1'))">
<INCO1 tt:value-ref="E1EDL20.INCO1"/>
</tt:cond>
With the simple transformation tt cond statment you can make an XML tag optional. In below example during deserialisation xml tag <INCO1> will be skipped when not availabke in the xml and SAP data E1EDL20.INCO1 will not be filled by the transformation.
Regards. Please give points when usefull !
Maybe you are looking for
-
How to change TEXT EDITOR in SMARTFORMS
Dear All, How to change TEXT EDITOR in SMARTFORMS i am getting editor like Microsoft Word but i want the regular editor. I am using ECC 6.0 GUI 710 thanks, RP
-
Select one record for each member of the group
Hi, am having a table where in i will be having data for so many group members. i need to fetch data for a particular group members whose number of rows of data may be more in numbers (but i want only one row of data for each member of the group) her
-
Need help with changing my region to accept EU ink cartridges on Photostat 2610
I have permanently moved to Poland (Europe)from Canada. I have brought with me HP printer Photo-smart 2610 All in one Ink cartridges do not work . I found out ,that I have to change a region for my printer to accept different inks. In Canada I was u
-
Starting and stopping oracle in Unix
I have installed oracle in a Unix Box. Since i am very new to Unix, Pls tell me tehs steps to start and stop oracle in Unix from telnet
-
Hi, I have Oracle 8i, database codepage is CL8ISO8859P5. I would like to download Cyrillic symbols from the database into a UTF8 file using Web Toolkit, but when I try to do this I realize that Cyrillic symbols are corrupted in the file. I suppose th