Dynamic Template file location in control file in Bursting

HI,
Normally we hard code the location of the template in the control file and keep the file at that server location.
When we move from DEV to higher instances, we might need to change this path in control file. Is there any way to handle this dynamically and it will take similar path from the instance to which this control file is deployed.
I need the syntax to handle this situation.
Thanks,
Praveen

<FONT FACE="verdana" SIZE="2">
You have to hardcode the values like the one below. In this case, even if you clone your instance, it will continue to work.
<xapi:template type="rtf" location="xdo://SQLAP.XXV8_APXPBSRA.en.US/?getSource=true"
${short_appl_name} = SQLAP
${template_code} = XXV8_APXPBSRA
Darshan Says,
In this case assuming that while registering template you have specified langugae as 'English' and territory as 'United States', if you have not specified any territory then replace US with 00 for default.
References:-
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Having Trouble using template in control file

Similar Messages

Dynamic location for RTF file in Bursting Control File

Hi
I have a query that determines the directory location of the RTF file on the server. (eg. query returns /u01/apps/erpd2/inst/apps/erpd2_mcdeagaix821/temp/XMCI_B2CR009_RFS.rtf
Instead of hard-coding this location as:
<xapi:template type="rtf" location="/u01/apps/erpd2/inst/apps/erpd2_mcdeagaix821/temp/XMCI_B2CR009_RFS.rtf">
</xapi:template>
I change the above to
<xapi:template type="rtf" location="${RTF_LOC}">
</xapi:template>
and fetch RTF_LOC at the bursting level in the Data template.
After specifying the location as a token in the bursting control file, the Bursting program errors out. It does not even go to the post-processing stage.
I have fetched the Outbound SMTP server name in a similar fashion and specified the same as a token in the Bursting XML. It works fine. Also, when I hard-code the same RTF location in the bursting file, it works! Just specifying it as a token errors out the bursting process.
Pls advise.
Ritu

Hi Ritu,
I am probably too late to help you, but here is an answer for completeness. I had the same problem as you, I needed to make my template selection dynamic.
The bursting control file below was not working until I applied patch 8594771 (BURSTING DOES NOT SUPPORT ESCAPE CHARACTERS LIKE "FIRST LAST <[email protected]>" )
I managed to find this patch by running the XML Publisher Report Bursting Program with debug=Yes and got the message "java.util.zip.ZipException: ZIP file must have at least one entry". Searching on Oracle Support for this message delivered patch number 8594771
Here is my control file:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XX_DUNNING/LIST_G_SITE_USE_ID1/G_SITE_USE_ID1/LIST_G_CORRESPONDENCES/G_CORRESPONDENCES">
<xapi:delivery>
<xapi:email server="localhost" port="99"
from="[email protected]"
reply-to="[email protected]">
<xapi:message id="email1" to="${CF_EMAIL_ADDRESS}" cc="${CF_CC_EMAIL_ADDRESS}"
attachment="true"
subject="${LIST_G_CUSTOM_LETTER_HEADER/G_CUSTOM_LETTER_HEADER/HEADER_TEXT}">
${LIST_G_CUSTOM_LETTER_FOOTER/G_CUSTOM_LETTER_FOOTER/FOOTER_TEXT}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="email1">
<xapi:template type="xsl-fo" location="${TEMPLATE_NAME}"
filter=".//G_CORRESPONDENCES[DUNNING_METHOD='Email']">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
location="xdo://XX.${LETTER_NAME}.en.00" also worked
Regards,
Ruth Miller

Location of CSS template files

hi all,
Can anybody tell me the location of CSS template files to customize the template ??
thanks in advance
Regards,
Ahmed

You do NOT want to change the bundled CSS files. Create your own CSS and include it in the template after the built-in CSS include. Any classes you create in your own file of the same name and specificity as the built-in classes will override those classes. For example:<style type="text/css">
td.myclass{color:red}
td.myclass{color:blue}
</style>The color of the text in a table cell with the class "myclass" will be blue, not red, since the same class was defined twice, it will use the one that came last on the page.
If you change the classes in the built-in template CSS files, you'll change them for everyone using your APEX instance, which is not a particularly good thing to do.
Tyler

In Yosemite I cannot locate the My Templates file for Pages.

In Yosemite I cannot locate the My Templates file for Pages.

When you select "new" "My Templates" should be at the bottom of the Sidebar.
The second line is in your bio and appears when asking a question. You can change it by clicking on bunnygrl to open your Bio to edit.

Load control template file /_controltemplates/TaxonomyPicker.ascx failed:

hi got these below errors in event viewer
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
i got this error message in wfe server eventviewer
and this in app server
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 2236
AppDomain Name: /LM/W3SVC/225774399/ROOT-1-130435939931055825
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:360914811eaa476b987aeea6e86a1806#authority=urn:uuid:ef463974a1364560a1ba9d3040a23e8f&authority=https://tfssp:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:1
Affected Endpoint:
http://tspmcwfe:32843/360914811eaa476b987aeea6e86a1806/MetadataWebService.svc
adil

In both Bing and Google "Load control template file /_controltemplates/TaxonomyPicker.ascx failed" gives this as the first result:
http://support.microsoft.com/kb/2481844
I'm happy to help people fix issues they've tried to sort themselves however failing to use a search engine before posting a thread is inefficient.

Get location of a template file

Hi all,
Can anyone help on how to get the exact location of that template file?
SAPR3://SAPR3CMS/get/800/SRM_5FDB_5FMN/6A9E681B8269DC45A69E685154723BF0/A_207_20-_20Schulzeugnis.pdf
Best Regards,
Sharam

Hi Mukul,
i have stored a file in Records Management. After that i debug the program an get this link for the document:
SAPR3://SAPR3CMS/get/800/SRM_5FDB_5FMN/6A9E681B8269DC45A69E685154723BF0/A_207_20-_20Schulzeugnis.pdf
Now i wand to open this pdf file in my browser. Is this possible? Or can i only open stored files with appropriate BAPIs?
Best Regards,
Sharam

Build a web gallery with amazing flash slideshows with dynamic XML files

Build a web gallery with amazing flash slideshows with dynamic XML files
Screenshot:
Features
Features
Transitions, zooming and panning effect You can choose from Random, Wipe from Left, Fade to White, Cross Expansion and other 60-plus transition effects. Zooming and panning effect is optional for advanced flash templates.
XML-driven This flash slideshow are XML-driven. The XML document allows more personalized controls over the flash.
Auto-playback and repeat mode The flash slideshow will play automatically after preloading, and it can repeat playback.
Dynamic customization Besides XML control, the advanced templates provide many more custom options, so that you can create slideshow that fits into your existing web design: width , height, border color, background color, thumbnail size, etc. More about dynamic customization
Usage and demo visit: http://webdesigndevelopment.blog.com...swf-xml-files/

Please excuse the bump...
Anyone with a LR flash gallery that starts with slideshow in play mode?
Can it even be set to do this?
The only code in the style.xml that looks like it might be realted is line 12 <playOptions playMode="pause"/>, changing that to "play" does nothing.
Thanks,
Donnie

In an Excel template file, can I set the Folder Path in the SaveAs Dialog box?

I have an Excel template file (xltm) and, with help from the forum, I now have a Workbook_BeforeSave subroutine to save the template as a macro enabled file (xlsm). I’m so thankful for that help from Edward in the forum.
I also want to set the default folder location to save the file. I really only need it when the template is saved as a new xlsm file, because if they open the xlsm file, it’s usually opened from the default folder path so any save would normally go back
to where the file was opened. However, with a template (even if the template is in the default folder) the Saved template reverts back to the user’s documents folder.
Is there a good way to do this?
I tried to modify the Workbook_BeforeSave code like this:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim FolderDir As String
Dim FileNameVal As String
FolderDir = "Z:\save\data\place\"
If SaveAsUI Then
If Dir(WorkBookFolder, vbDirectory) <> "" Then
Application.DefaultFilePath = WorkBookFolder
End If
FileNameVal = Application.GetSaveAsFilename(, "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
Cancel = True
If FileNameVal = "False" Then 'User pressed cancel
Exit Sub
End If
ThisWorkbook.SaveAs Filename:=FileNameVal & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
Application.EnableEvents = True
End If
End Sub
But there are a lot of checks that would need to be done.
I'm not sure how to only default the folder saved only when they open the template, but not change it when they just open an already saved Excel file created by the template (with all the active content, macros, etc.).
Alan Edwards

Hi Alan,
store the path\filename in the 1st argument:
FileNameVal = Application.GetSaveAsFilename("C:\*.xlsm", "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
Andreas.

How to display a dynamic image file from url?

Hey,I want to display a dynamic image file from url in applet.For example,a jpg file which from one video camera server,store one frame pictur for ever.My java file looks like here:
//PlayJpg.java:
import java.awt.*;
import java.applet.*;
import java.net.*;
public class PlayJpg extends Applet implements Runnable {
public static void main(String args[]) {
Frame F=new Frame("My Applet/Application Window");
F.setSize(480, 240);
PlayJpg A = new PlayJpg();
F.add(A);
A.start(); // Web browser calls start() automatically
// A.init(); - we skip calling it this time
// because it contains only Applet specific tasks.
F.setVisible(true);
Thread count = null;
String urlStr = null;
int sleepTime = 0;
Image image = null;
// called only for an applet - unless called explicitely by an appliaction
public void init() {
               sleepTime = Integer.parseInt(getParameter("refreshTime"));
          urlStr = getParameter("jpgFile");
// called only for an applet - unless called explicitely by an appliaction
public void start() {
count=(new Thread(this));
count.start();
// called only for applet when the browser leaves the web page
public void stop() {
count=null;
public void paint(Graphics g) {
try{
URL location=new URL(urlStr);
image = getToolkit().getImage(location);
}catch (MalformedURLException mue) {
               showStatus (mue.toString());
          }catch(Exception e){
          System.out.println("Sorry. System Caught Exception in paint().");
          System.out.println("e.getMessage():" + e.getMessage());
          System.out.println("e.toString():" + e.toString());
          System.out.println("e.printStackTrace():" );
          e.printStackTrace();
if (image!=null) g.drawImage(image,1,1,320,240,this);
// called each time the display needs to be repainted
public void run() {
while (count==Thread.currentThread()) {
try {
Thread.currentThread().sleep(sleepTime*1000);
} catch(Exception e) {}
repaint(); // forces update of the screen
// end of PlayJpg.java
My Html file looks like here:
<html>
<applet code="PlayJpg.class" width=320 height=240>
<param name=jpgFile value="http://Localhost/playjpg/snapshot0.jpg">
<param name=refreshTime value="1">
</applet>
</html>
I only get the first frame picture for ever by my html.But the jpg file is dynamic.
Why?
Can you help me?
Thanks.
Joe

Hi,
Add this line inside your run() method, right before your call to repaint():
if (image != null) {image.flush();}Hope this helps,
Kurt.

How do I find dynamically related files where Wordpress is not involved

There are lots of posts about "Dynamically-related files could not be resolved because the site definition is not correct for this server" but they all seem to relate to Wordpress or other blogging software.
I have recently had to upgrade from DW8 to DW CS5.5 running on Windows 7 64bit. and get this error on lots of pages but there is no help about fixing it. The local testing server is localhost set up to run PHP with iis7 on virtual folders.
What do I have to do to get the dynamically related files to be found?
Thanks

I think I've cracked it - nothing to do with databases, that was a red
herring.
I had a hundred or so sites on an XP machine running Dreamweaver 8 and used
the export facility to save their settings when I moved to a Windows 7
system. Win7's directory structure is different but the testing server
location stored in the export file doesn't take account of this and part of
the path may now include directories that are viewed as shortcuts. Once the
locations are reset in Win7 terms, the errors go away.
Regards
Steve
Steve and Diana Kimpton
The Word Pool
http://www.wordpooldesign.co.uk/
http://www.wordpool.co.uk/
http://www.ukchildrensbooks.co.uk/
http://www.contactanauthor.co.uk <http://www.contactanauthor.co.uk/

Error while reading template file

Hi,
i have successfully created a template file from a domain(weblogic server 11.3.5).now i have to use this template file to configure a new weblogic server(11.3.5) domain.
i have installed the new instance of weblogic server and successfully ran the WLST in off-line but when i am trying to read that template file its giving following error
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: com.oracle.cie.domain.ConfigRuntimeException: Required component home not found for component 'oracle.as.im.top' version '11.1.1.2.0'
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.readTemplate(WLScriptContext.java:340)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.readTemplate$1(/tmp/WLSTOfflineIni1669327255348009364.py:17)
at org.python.pycode._pyx3.call_function(/tmp/WLSTOfflineIni1669327255348009364.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx16.f$0(<console>:1)
at org.python.pycode._pyx16.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: com.oracle.cie.domain.ConfigRuntimeException: Required component home not found for component 'oracle.as.im.top' version '11.1.1.2.0'
at com.oracle.cie.domain.script.ScriptExecutor.readTemplate(ScriptExecutor.java:465)
at com.oracle.cie.domain.script.jython.WLScriptContext.readTemplate(WLScriptContext.java:332)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.readTemplate$1(/tmp/WLSTOfflineIni1669327255348009364.py:18)
... 20 more
Caused by: com.oracle.cie.domain.ConfigRuntimeException: Required component home not found for component 'oracle.as.im.top' version '11.1.1.2.0'
at com.oracle.cie.domain.DomainTemplate.<init>(DomainTemplate.java:256)
at com.oracle.cie.domain.DomainTemplate.<init>(DomainTemplate.java:182)
at com.oracle.cie.domain.WLSTemplateBuilder.parseTemplate(WLSTemplateBuilder.java:575)
at com.oracle.cie.domain.WLSTemplateBuilder.parseDomainTemplate(WLSTemplateBuilder.java:485)
at com.oracle.cie.domain.WLSTemplateBuilder.buildDomainTemplate(WLSTemplateBuilder.java:1369)
at com.oracle.cie.domain.script.ScriptExecutor.readTemplate(ScriptExecutor.java:429)
... 30 more
thanks

Hi,
To resolve the problem do the following:
1. Install Weblogic Server 10.3.3 in a new location.
2. Install the OAM schema and any other required schemas from the RCU 11.1.1.3 into a unique schema name.
3. Install the Identity and Access Management 11.1.1.3 (OAM 11g) software.
4. Configure OAM as described in the Installation Guide:
Oracle Fusion Middleware Installation Guide for Oracle Identity Management 11g Release 1 (11.1.1)
http://download.oracle.com/docs/cd/E14571_01/install.1111/e12002/part2.htm#BABGDJFD
This will help you.
Regards,
Kal

Dynamic Logo file names in PO XSL-FO stylesheet

We have different company logo files for different operating units. Hence , we require to use a dynamic logo file name in XSL-FO template.
When I use the below for a single file it works.
<fo:inline>
<fo:external-graphic content-width="50pt" content-height="50pt" src="url({'${OA_MEDIA}/Logo_medium_COMCEL.jpg'})" />
</fo:inline>
However, I would need to make the filename dynamic.
When a tried usng an xsl variable tos tore fielname, it didnt work.
Any pointers as to how we can achieve that would be helpful

Thanks for your quick reply Dave, I appreciate your time.
But I couldn't test the new template as I was neither able to create a new PO nor was able to run the PO Output for communication Report. When I tried to create a PO the Purchase Order form did not open saying I am not setup as an employee, even the PO Output for communication did not give any LOV for the PO's.
I tried to define employee name in the employee's login
information (System administrator/Security/User/Define) for my user, but some how my name doesn't appear in LOV. Any help is appreciated.
Thanks,
Sharmila

Document-relative Template paths in templated files?

Is it possible to make Dreamweaver use document-relative
paths to parent Templates rather than root-relative? My site
definition is setup so such that the local folder is the root of
the web site. However, on the server the site is actually in a sub
folder, so the real web root is not the same as this web sites
root. So, something like this:
Local root folder = C:\...\Project Name\www2\
(Local templates folder = C:\...\Project
Name\www2\Templates\)
HTTP Address =
http://www.mysite.com/clients/client-site/
(Remote templates folder =
http://www.mysite.com/clients/client-site/Templates/)
The end user will be using Contribute to manage the content
on this site, so I'm using Templates to control some aspects of the
site. My problen is that the path back to the Template is being
written as a root-relative link:
InstanceBegin template="/Templates/navigation-sub.dwt.php"
When I then connect to the site using Contribute and try to
edit a page, I get an error saying that it can't find the template
(which is true because the template is actually in
"/clients/client-site/Templates/navigation-sub.dwt.php" and not
"/Templates/navigation-sub.dwt.php"). I have the Links Relative to
Document option checked in my site definition, but that appears to
only apply to regular links and not paths to Template files.
Murray had mentioned some technotes that addressed this, and
I think I found the ones he was thinking of, but they seemed to
only address regular links and it wasn't clear if the Template
paths were affected by the solution (which was to set the Links
Relative to Document option which I mentioned above).
So is it possible to tell DW to use document relative paths
to its template files? I know you're thinking "Why not just create
the local folder with the client and client-name folders," but this
wouldn't work as the site will eventually be moved to the clients
own website where the site files really will be in the site root.
This is the whole reason for using document relative files in the
first place. Any help would be greatly appreciated.

OK, apparently I'm not explaining myself enough here because
you guys keep giving me the same answer to something that I've
already said isn't a viable solution. Let me explain in greater
detail why just updating the local folder structure won't work.
Let's assume that I did do what you suggest. My local folder
could technically stay the same but I'd add two additional
directory levels ('clients' and 'client-site') to match the site
structure on my testing server. I then move all of the existing
files into the lower 'client-site' directory *except* for the
Templates folder because DW likes that to be at the "root" of the
"site". So now assume my local site looks something like this:
C:\...\Project Name\www2\ (DW would consider this the "root"
of the site)
.....clients\
..........client-site\ (i'll refer to this as the client root
for simplicity sake)
...............articles\
....................doc_a.html
...............images\
....................img_a.jpg
...............index.html
.....Templates\
..........client-template.dwt
If DW is writing the Paths back to the Template file using
site-relative paths then file index.html in the client root (i.e.
/clients/client-site/) would have the path back to template
client-template.dwt written as follows:
InstanceBegin template="/Templates/client-template.dwt"
Also assume that img_a.jpg is the client logo that will be
used on all of the pages and so it is in a protected part of the
template. The document-relative path from the template
client-template.dwt to the image would be:
<img src="../clients/client-site/images/img_a.jpg">
Of course since my site is defined to use document-relative
links then this path would resolve to just "../images/img_a.jpg"
for index.html.
OK, so far so good. I upload all of this to my testing
server, give my client a connection key for Contribute and let them
test away. They love it (naturally) and want to move everything to
production. This is where your suggested solution falls apart.
In order for the site to continue to work as-is I would have
to copy the entire directory tree (/client/client-site/etc) to the
clients web site, so what should be www.client-site.com/index.html
becomes www.client-site.com/clients/client-name/index.html. I also
have to copy over the Templates folder, stripping out any other
Templates that might be in there (my own site template for
example). Not only is this cumbersome, but the client hates the
fact that there are all these subdirectories in their URL (as
finicky as clients are) and they think it is unprofessional. My
whole purpose for developing using document relative links is so
that no matter where I plop the site, it will work as intended.
OK, the first fox for this that comes to mind is to take just
the site files (so everything under /clients/client-name/) and plop
that into the root folder on production. All of the existing files
should work fine since they use document-specific links. However,
the client still needs to use Contribute to edit these documents so
I have to copy over the Template folder. I can put that into the
root since all of the paths back to the template are root-relative,
right? Wrong - because all of the links in the template still point
to the files as if they were in '/clients/client-name/', which they
no longer are. So any new files based on the template will contain
broken links, and any updates to the existing files might also
result in broken links.
So then I need to keep two versions of the site? And if I
make a change to the template on the testing site, I then have to
reconcile the changes to the production version? Way too much. And
all of this would be irrelevant if I could just use
document-specific links back to my templates.
Does it make sense now why updating the site structure isn't
as optimal of a solution as you are making it out to be.
quote:
Originally posted by:
Newsgroup User
Create a new site definition for this testing site that uses
the correct
root directory. Then it doesn't matter....

Blank.template file issue

Alright guys,
I messed up!
I was trying to get pages to permantly set the default language to Australian English, when I found that the pretty much the only way to do it is save a new blank template. (this is the normal blank template with the language set to Australian)
I tried to take it a step further and update ( well replace) the original blank.template file in the package folder,
And now i get error when opening old documents.
I know i shouldnt have messed with the application package
but If anyone here is kind enough to upload a copy of their original blank.template file
i'd be ever so grateful
That should fix it straight away
P.S. yes, i've already slapped myself for replacing without backing up a copy
<Edited by Host>

To have Pages in Australian english you change it in the System preferences. Not fiddeling with the application at all. You can create a blank template and change all the styles to australian english and then save that template as a template and it will be located in My templates in the New tempalte chooser.
To get an original blank template in the right location install Pages again.

Do template files work for those not editing in dreamweaver?

Hi!
Do dreamweaver .dwt template files work for people who are not making changes with dreamweaver?
Thanks!

Better make that a *NO*. Allowing people to edit Template controlled pages outside of DW will be a catastrophe, unless they are very familiar with DW Templates and how they work.

Dynamic Template file location in control file in Bursting

Similar Messages

Maybe you are looking for